Used Hermle for sale (116)

Condition: good (used), Year of construction: 2010, 2010 Hermle C50 U MT Dynamic 5 Axis Vertical Machining Centre With Turning Capability & Dual Siemens 840D Controls Lodpfxezt Nywo Afwjrr Table Dimension Ø1,000mm (16 16mm H7 'T' Slots). Maximum Table Load 2,000kg (1,000kg Turning). Maximum Component Dimension Ø1,000 x 810mm High. Axis Travel 'X'=1,000mm, 'Y'=1,100mm, 'Z'=750mm , 'A'=+100°/-130°, 'C'=360°. Rapid Traverse 'X'60m/min, 'Y'=60m/min, 'Z'=65m/min. Maximum Spindle Speed 12,000rpm (56kW Motor). Maximum Turning Spindle Speed 500rpm. Spindle Taper HSK A100. 84 Position ATC (Additional ZM 42 Magazine). Maximum Tool Ø250mm, Maximum Tool Length 430mm, Maximum Tool Weight 30kg. Chip To Chip Tool Change Time 7s. S/No. 19871 (2010). Machine Hours 89,860.9 , Drive Hours = 74,916.2, Spindle Hours 10,585.7, Work Spindle Hours 566.0 (New Spindle Installed 2023). With Knoll KF 400 Through Coolant Paper Filtration System, Knoll S-1 Chip Conveyor, Swarf Bin, Handte Mist Extraction Unit, Hyfra Pedia VWK70-DE-S Chiller Unit, Brand New Blum Laser Toolsetter, Quantity Of Tooling In ATC, Renishaw MP40-2 Spindle Probe, Visiport TK2 Spin Window, Blum Reference Tool In Carry Case, Heidenhain Calibration Kit In Carry Case, Automatic Doors, Retractable roof For Loading & Technical Manuals. Weight 21,500kg. Technical Agreement/Specifications Are Located In A Folder Inside Control Panel. Machine Is A Clean & Very Good Condition, Only Issues Are Internal Lights Not Working (No Faults As They Were Repaired Last Month Through Kingsbury). We Run Fusion 360 Through The Machine.

Condition: good (used), Year of construction: 1996, functionality: fully functional, Work area: 800x600x500 Rapid traverse rate: 30 m/min Spindle speed: 15000 RPM, SK40 NC rotary table, diameter = 280 mm Electronic handwheel module Electrical thermal expansion compensation Ethernet interface, TNC 426/430 Lrodpfxszv Syfs Afwjr Measuring probe system, SK40, Renishaw Chip conveyor without chip cart Enclosed cabin roof section Air blow-off device, C800 The spindle was replaced in May 2018 with a total operating time of 25,185 hours. The current operating time is 31,083 hours. This means that the spindle has been in operation for 5,898 hours since its replacement.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, feed length X-axis: 35,000 mm, feed length Y-axis: 35,000 mm, feed length Z-axis: 35,000 mm, controller manufacturer: HeidenHain, controller model: iTNC 530, total height: 2,800 mm, total length: 3,500 mm, total width: 3,000 mm, overall weight: 6,600 kg, spindle speed (max.): 18,000 rpm, X - Travel: 600mm Y - Travel: 450mm Z - Travel: 400mm A - Axis: 110° B - Axis: 360° Table Ø: 280mm Feed rate X-Axis: 35000mm/min Feed rate Y-Axis: 35000mm/min Feed rate Z-Axis: 35000mm/min Feed rate A-Axis: 10 degrees/min Feed rate B-Axis: 15 degrees/min Lrodpfx Aozvd Ubsfwer Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 18000 rpm ATC / revolver: 30 Number of controlled axes: 5 Chip conveyor: No Length: 3500mm Width: 3000mm Height: 2800mm Weight: 6600kg

Condition: not inspected (used), x-travel 850 mm Ledpfx Afoud Illjwjrr y-travel 440 mm z-travel / mm Control TNC 355C

Condition: excellent (used), Year of construction: 2015, operating hours: 12,500 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, overall weight: 12,500 kg, We offer in perfect condition Hermle C42U Dynamic with Heidenhain 640 control. Machine has 12.000 spindle hours. Lrjdpfx Afezpfg Ejwsr X-Axis travel: 800 mm Y-Axis travel: 800 mm Z-Axis travel: 550 mm Dynamic package torque axis, table Ø440 with secondary claming plates 920 x 490 mm Spindle: HSK-A63 18.000 RPM Machine will be in stock in 2 weeks

Condition: ready for operation (used), Year of construction: 2020, Make: HERMLE Type of machine: C 42 U Year of manufacture: 2020 Control system: Heidenhain TNC 640 Machine's weight: 13.000 kg Tool holder: HSK-A63* x-travel: 800 mm y-travel: 800 mm z-travel: 550 mm Speed range: 18.000 U/min max. Table load: 850 kg Table dimensions: 800 × 630 mm Number of tools in the magazine: 92 Pl. Lrodpfx Afozv S Rqowsr Internal coolant supply: 40 bar

Condition: used, HERMLE C 600 V is a 3-axis machining center, engineered for precision, high accuracy and reliability. Table 800×465 mm, travels X 600 / Y 450 / Z 450 mm, table load max 200 kg; tool changer 30 stations, spindle taper HSK‑A63. Spindle 20–16,000 min⁻¹, spindle power 15 / 10 kW; feed 1–30,000 mm/min, rapid 35 m/min, max feed force 6000 N. Supply 3×400 V 50 Hz, total power 35 kVA, weight ≈6800 kg, size 2500×2020×2750 mm, noise 78 dB(A). Coolant through spindle 40 bar. Achieves tight tolerances; typical sectors: automotive, aerospace, medical, watchmaking, tooling. Ledpfx Afszuwdaswerr

Year of construction: 2000, condition: used, X-axis: 1000/1245mm, Y-axis: 630mm, Z-axis: 550mm, angle table: 1200x630mm, quill stroke: 75mm, tool holder: SK40, drive power: 7.5kW, spindle speed (continuously variable): 20-7,000/min, feeds: 1-20,000mm/min, rapid traverse: 20,000mm/min, connected load: 14kW, rated current: 24A, control: HEIDENHAIN TNC 426 with hand-held control unit, total connected load: 17kVA, weight: 6t, operating hours, machine on: 122,355h, control on: 18,579h, program run: 36,747h, with Knoll 400 K-1 scraper belt conveyor. Equipment: manually swivelling vertical milling head, protective enclosure with viewing window, coolant system, chip conveyor, HEIDENHAIN 3D touch probe TS 642. An on-site inspection is possible. Lredpfxozvv I Tj Afwjr

Condition: used, Year of construction: 2007, x-travel 600 mm y-travel 450 mm z-travel 450 mm Control Heidenhain iTNC 530 feed power 7.000 N rapid traverse 45 m/min Acceleration 6 m/s² number of tool places 30 Pos. Lsdpfx Afszq Hl Eowerr Max. magazine capacity 120 kg weight of tools max. 6 kg diameter of tools max. 80 mm tool length - max. 250 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: excellent (used), Year of construction: 2018, HS Flex 20 station pallet loader. XYZ: 600 x 550 x 330mm, Maximum workpiece diameter 450mm, maximum workpiece height 355mm, Maximum table load 300Kg, A axis -/+ 115 degrees, Lodpfx Afszghngewjrr spindle taper HSK 63, spindle speed 15,000rpm, 30 station tool changer, Heidenhain TNC 640 control, with swarf conveyor , and high pressure coolant.

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 875 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 7,000 rpm, overall weight: 4,500 kg, CNC control Heidenhain TNC 426 electronical hand wheel manual swivel head quill Lrsdpfx Ajzr D Akjfwor coolant device measuring feeler Technische Daten: /technical details X Weg / x travel 875 mm Y Weg / y travel 500 mm Z Weg / z travel 500 mm Drehzahlbereich 2-stufig / spindle speed range (2-steps) 20 - 7000 UpM / rpm Eilgang / rapid feed 15 m/min. Spindelaufnahme / spindle taper SK 40 Tischaufspannfläche / table clamping area 900x528 mm Gewicht der Maschine ca. / weight 4500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Year of construction: 1996, condition: ready for operation (used), Travel X/Y/Z: 600mm/400mm/420mm, feed rate X/Y/Z: 6m/min, rapid traverse: 6m/min, spindle power: 8kW, speed: 4500rpm, quill stroke: 75mm, table dimensions X/Y: 900mm/450mm. Machine dimensions X/Y/Z: approx. 2800mm/2200mm/2100mm, weight: approx. 2800kg, control: Heidenhain 415B, hours: approx. 56193h. Includes cooling lubricant system and 3D measuring probe. The brake of the Z axis is to be replaced. Documentation available. An on-site inspection is possible. Lsdsyifk Aepfx Afworr

Year of construction: 1987, condition: ready for operation (used), Three old Hermle and Deckel milling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferred. Lodpfsy I Adhox Afwjrr

Year of construction: 1994, condition: ready for operation (used), A CNC universal tool milling and drilling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4400mm/4250mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 425. Documentation available. An on-site inspection is possible. Lredpow D Evlofx Afwjr

Condition: ready for operation (used), A CNC universal tool milling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/500mm, quill stroke: 100mm, tool holder: SK40, spindle speed: 3150rpm, feed rate: 2m/min, rapid traverse: 5m/min, max. workpiece weight: 400kg. Machine dimensions X/Y/Z: approx. 3900mm/3300mm/2100mm, weight: approx. 3300kg, control: Heidenhain TNC 150. An on-site inspection is possible. Lrodpfx Afoxwcu Ajwer

Condition: used, Year of construction: 2011, travel -x axis 650 mm travel -y axis 600 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 18.000 U/min NC rotary indexing table Ø 630 mm numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The machine has only 13.924 H spindle hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. Ledpfozczhajx Afwerr - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: used, Year of construction: 2007, travel -x axis 650 mm travel -y axis 600 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 10.000 U/min NC rotary indexing table Ø 630 mm numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. Lsdpfxezaf Hue Afwjrr - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 420 mm, spindle speed (max.): 4,000 rpm, controller model: Heidenhain 407, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 400 mm Travel range Z-axis: 420 mm Spindle speed max.: 4,000 rpm Tool holder: SK 40 Distance from spindle to table: 127–567 mm Spindle diameter in the front bearing: 55 mm MACHINE DETAILS Control system: Heidenhain 407 Lsdpjzpxfhofx Afworr EQUIPMENT Handwheel Network connection

Condition: used, Year of construction: 1995, CNC Milling Machine, Universal Manufacturer: HERMLE Type: UWF 902 S Year of Construction: 1995 Operating Hours: 65,071 Control System: HEIDENHAIN TNC 426 Working Area X/Y/Z: 600 x 450 x 500 mm Spindle Speed Range: 20 - 6,300 RPM Tool Holder: SK 40 Lrsdpfx Afev Rxa Sewor M & H 3D Probe (for workpiece probing) Vertical-Horizontal Milling Attachment Drilling Spindle Coolant System Rotary Table: 900 x 458 Weight: 4,000 kg Machine Dimensions: L x W x H approx.: 3,900 x 2,000 x 2,000 mm ä3826

Condition: used, Year of construction: 1995, CNC Milling Machine, Universal Manufacturer: HERMLE Type: UWF 902 H Lsdsv Rpr Sjpfx Afwjrr Year of manufacture: 1995 Operating hours: 46,680 Control system: HEIDENHAIN TNC 426 Travel ranges X/Y/Z: 600 x 450 x 500 mm Rotary table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions L x W x H approx.: 2,950 x 2,200 x 2,300 mm 3826ä

Condition: ready for operation (used), Year of construction: 1999, operating hours: 20,132 h, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, table width: 465 mm, table length: 800 mm, table load: 200 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HERMLE C600V was manufactured in 1999. It features a fully enclosed design with dual front sliding doors and an ergonomic tool changer system. The machine is equipped with a HEIDENHAIN control unit, ensuring precision and reliability. If you are looking to get high-quality machining capabilities, consider the HERMLE C600V vertical machining centre we have for sale. Contact us for further details. - Control On: 48,840 hours- Machine On: 48,303 hours- Program Run: 19,244 hours- Drive On: 42,175 hours- Axes in Motion: 19,519 hours- Tool Magazine 1-10: 58 hours- Tool Magazine 11-20: 622 hours- Tool Magazine 21-30: 40,269 hours- Current Axis Coordinates: X = -236.820, Y = +421.759, Z = +186.835- Enclosure Style: Fully enclosed with dual front sliding doors and red ergonomic handles- Electrical Supply Connection: Overhead industrial power sockets (METEENCE units visible: 2x blue 230V outlets, 3x red 400V CEE industrial outlets)- Tool Changer System: Chain/pocket style automatic tool changer visible via top rear access panel- what is not included: clamping device, probe- the machine is equipped with the necessary mount for a Heidenhain probe- a software update was performed on the Hermle machine just this year Technical Specification Lrjdpfxoy T Htks Afwer Taper Size SK 40 Through-spindle Coolant No

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231232, Hermle C600 U, year of manufacture 2004 Spindle new, with commissioning report Control system: - Heidenhain iTNC 530 - Control system operating hours: 68026 - Machine operating hours: 81237 - Spindle operating hours: 12429 Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool magazine positions Equipment: - Rigid clamping table - NC rotary table, 4th axis (iTNC) - Coolant system - Chip conveyor: none - Electronic handwheel (iTNC) - Tool breakage monitoring - Chip flushing nozzle - Foot switch for clamping/unclamping - Hydraulic unit for clamping/unclamping Travel paths: - X-axis (longitudinal): 600 mm Ledpfx Afozp Ihfswsrr - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm - Maximum table load: 250 kg Axes: - Axis rapid traverse: 35 m/min - Acceleration: 5 m/s² - Measuring system X/Y/Z: 0.1 µm Dimensions & Weight: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: excellent (used), Year of construction: 2015, operating hours: 22,387 h, Manufacturer: Hermle | Type: C 400 U | Serial number: 23589 | Year of manufacture: 2015 | Operating hours: approx. 8939 | Control system: Heidenhain TNC 530; Travel ranges (X/Y/Z): 850 / 700 / 500 mm; Swivel/rotating table: Ø 630 mm, integrated, C- and B-axis. Tool magazine: 38 positions; Spindle speed: up to 18,000 rpm; Drive power: approx. 20 kW; Machine weight: approx. 8,000 kg; Cooling system: Knoll 850 K-1 with high-pressure unit; Coolant system; Central filter with return conveyor and heat exchanger; NC swivel rotary table; The operating hours refer to spindle operation. | Dimensions: approx. 4000 mm x 3400 mm x 2700 mm (W x H x L) | Approx. 10,500 kg | The specified dimensions are approximate values. All other information is provided without guarantee. | Grey | Steel Category: Machines and technical equipment Lrodpozq Dkxefx Afwer

Condition: good (used), Year of construction: 1983, functionality: fully functional, Universal Production and Tool Milling Machine Type: UWF 700 PH Machine No.: 5670 Serial No.: 034650 Year of manufacture:1983 Control system: Positioning and path control incl. display HEIDENHAIN TNC 135 3-axis manual input control TECHNICAL DATA Working area X-axis (longitudinal) manual/automatic: 410/390 mm Y-axis (transverse) manual/automatic: 310/290 mm Z-axis (vertical) manual/automatic: 400/380 mm Quill travel vertical: 63 mm Clamping surface, vertical: 830 x 224 mm Number of T-slots: 4 Angular table clamping surface: 700 x 285 mm 6 T-slots: 12 H8/45 mm Workpiece weight: 200 kg Distance table – spindle nose (vertical): 0 – 515 mm Distance table – spindle center (horizontal): 30 – 565 mm Drive power (at 1500 rpm): 2.2 kW Speed range: 45 – 2000 rpm Number of speeds: 12 Speed progression (geometric steps): 1.4 Tool holder (DIN 2079): ISO 40 Feed range (all axes): 2 – 1500 mm/min Ljdpfox Ry Atjx Afwerr Rapid traverse (all axes): 1.5 m/min Operating voltage: 380 V/50 Hz Machine dimensions: 1.2 x 1.6 x 1.7 m Space required: 2.1 x 2.1 m Machine weight: 1100 kg EQUIPMENT / ACCESSORIES  Hand operation and CNC program control  Vertical and horizontal machining  Swiveling vertical milling head  Adjustable-angle vertical milling head  Various tool holders  Manual quill feed (vertical)  Angular table 700 x 285 mm  Coolant system  Coolant and chip tray  Electrically secured chip guard in work area  Mounting elements  Machine lamp  Documentation Condition: Control system overhauled, workshop tested

Year of construction: 1989, condition: ready for operation (used), X-axis travel: 700 mm, Y-axis travel: 550 mm, Z-axis travel: 500 mm, spindle speed: 25 to 4200 rpm, three speed ranges, feed rate: 1 to 5000 mm/min, rapid traverse in X, Y and Z: 10 m/min, vertical quill travel: 95 mm, clamping table dimensions: 1000 x 500 mm, spindle motor power: 12 kW, connected load: 18 kW, control system: Heidenhain TNC 355, length: 4260 mm, width: 4400 mm, height: 2300 mm, weight: 3.5 t, operating hours: 31,248 h. The machine is equipped with an SK40 tool spindle in accordance with DIN 2079, a swivelling spindle head, a spindle head that can be swung away for machining with the horizontal spindle, an outboard support for horizontal machining, direct measuring systems, a coolant system with a 100 litre reservoir, approximately 38 tool holders, most of which are fitted with tools, a table with tool holders, a workbench with cabinet, various hand tools, various clamping devices, a three-jaw chuck with clamping ring and documentation. The screen has burn-in marks but is still readable. An on-site inspection is possible. Lrsdezrn Ikspfx Afwer