Used Broach Reamer for sale (267)

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: 17065, Manufacturer: henning Model: U6/1000 Machine no.: 17065 Year of construction: 1979 Weight: 1.100 kg General / technical data: used mechanical vertical broaching machine Henning, in working condition Tractive force: 6,000kg (60KN) Clearing speeds: 3m/min and 6m/min Return speed: 6m/min maximum stroke: 1,000mm maximum tool length: 1,200mm table size / work surface: 600x460mm / 480 x340mm Table aperture: Ø 170mm with eccentric table insert with Ø 90mm bore for standard broaching mandrels (Rausch system) Kledpfx Ajup Uzfel Nsu Workpiece diameter: any Dimensions (h x w x d): 1,650mm x 1,200mm x 700mm (h= table height to floor without superstructure) Motor: 7.4 /10kw Power supply: 380 Volt / 50 HZ Accessories / special equipment: - Integrated coolant system - Return circuit with double actuation mode - Machine documentation - Automatic clamping jaw opener in the lower drawbridge position (tool removal) - Tool clamping with universal clamping jaws for flat shanks DIN 1416 BL 6 Remark: The machine is in original condition, the function has been tested. The machine is mechanically driven by a trapezoidal threaded spindle and a geared motor. In contrast to most mechanically driven broaching machines in which the trapezoidal spindle forms the drive and guide element, this machine has additional guide columns. The machine is therefore additionally column-guided and very stable. The double spindle drive is ideal for a continuously constant cutting speed, even with higher tensile forces. The machine is in our warehouse and can be inspected under power.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) Kledpfxsw Ighis Al Nou - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new - All sheet metal and enclosures are new - The following components have been overhauled and re-used: - Machine base - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) - Gear wheels - Electric motor (new brake, new bearings) The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul).

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Overhauled: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Kedpfow H Dgnjx Al Nslu Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) - Integrated coolant system with solenoid valve (controlled via swing system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly - New drive motor (SEW Germany) with brake - The machine has been freshly painted with 2-component structural paint General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Year of construction: 1962, condition: good (used), machine/vehicle number: 1886, Used vertical hydraulic internal broaching machine with 3 broaching points Tractive force: 10.000 kg clearing length: 1.200 mm Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380Volt 50 HZ / 8.0 KW Accessories / special equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and in the feeder. The machine has an integrated coolant system. Remarks: Klsdpfot Dwb Dox Al Neu The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse.

Condition: used, functionality: fully functional, Year of construction: 1966, overall weight: 7,000 kg, input voltage: 380 V, broaching length: 1,500 mm, number of broaching positions: 3, workpiece diameter (max.): 575 mm, total height: 5,100 mm, Manufacturer: Karl Klink Model: RSI 20x1500 Year of manufacture: 1966 Weight: approx. 6,700kg Machine No.: 2455 General / technical data: Used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 20,000 kg Broaching stroke: 1,500 mm Ksdpfx Aljwql Rvo Njlu Broaching stations: 3 units Distance between broaching stations: 2 x 145mm Mounting diameter of the draw heads: 3 x Ø 85mm Passage width between the columns: max. 580 mm Cutting speed: hydraulically steplessly adjustable from 1 m/min up to max. 7 m/min Return speed: hydraulically steplessly adjustable from 7 up to max. 25 m/min Machine space requirement: (w x d x h) approx. 1,500 x 2,100 x 4,600 (h max. 5100 with raised tool feeder) Power supply / Connected load: 380Volt 50 HZ / 14kw Accessories / special features: The machine is equipped with a workpiece table with 3 holes for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the drawbridge and in the feeder. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production, for optimal use, ideally a foundation (pit) is required or optionally a platform. Draw heads and ejector needles are available on request. The machine can be inspected under power at our warehouse. General information: We constantly have a large selection of approx. 80 used broaching machines with pulling forces from 3,000 kg to 63,000 kg in horizontal as well as vertical design in stock. A large part of the broaching machines in stock are ready for demonstration and can be inspected. If required, we can offer you used equipment such as draw heads, ejector needles, broaching tools and other specific accessories. We operate as a contract broaching company and can also assist you with technical questions based on 50 years of experience in broaching technology.

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 480 kg, input voltage: 400 V, input frequency: 50 Hz, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, reverse speed: 100 mm/s, workpiece diameter (max.): 800 mm, total height: 1,680 mm, Manufacturer: Wiemers AG Kodpfx Alow D E Twj Nolu Model: SR 30 /1000 Machine No.: WAG 3104 Year of manufacture: 2025 Weight: 480kg General / Technical Data: New vertical broaching machine by Wiemers SR 30 (100% compatible with Rausch RS 3) Tensile force: 30 kN (3,000kg) Broaching speeds: 3m/min & 6m/min Return speed: 6m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / Working area: 430mm x 320mm / 340mm x 220mm Table aperture: Ø 90mm for standard broaching arbors "System Rausch" Workpiece diameter: unlimited (removable coolant swivel system) Broaching capacity / keyway width: up to 20mm in steel (from 16mm broaching tool width only with stepped tool shank) Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height from floor without attachments) Motor: 2.5kW/3.0kW, 2-stage for 2 working speeds Power supply: 400 Volt / 50 Hz Equipment: - Gear motor drive with 2 working speeds - Reinforced draw bridge made from tool steel for higher tensile forces - Safety door with door interlock, safety interrogation and safety monitoring - Easily removable chip chute with tool extraction protection and parking facility - Externally adjustable tool length setting system (reproducible across machines) - Protective covers for stroke adjustment and electrical switching units - Oil-tight tray on the control cabinet - Electrical sensing of clamping jaws (tool extraction monitoring prevents unintentional retraction of the draw bridge – extra safety for operator and tool) - Integrated coolant system with electrically switched solenoid valve and drain tap - Coolant swivel system with automatic coolant switching via the swivel system - Extra reinforced chip basket and chip screen with magnetic insert - Stainless steel control panel with permanent labelling - 4 central lubrication points for trapezoidal spindle drive with manual grease gun - Electrical preparation for external control element (16-pin connector) - Provision for automatic clamping jaw opening during profile broaching with roller lever - Machine documentation with “CE” declaration of conformity Optional extras: - Automatic clamping jaw opener for easier tool extraction during profile broaching - Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600mm - External electrical operating unit for broaching and return stroke, as well as emergency stop functionality Note: The machine is 100% compatible with Rausch broaching machines of the same performance class in the RS 3, RS 4, and RS 6 series available on the market. All fixtures, tools or arbors can be used 100% interchangeably. General information: The double spindle drive ensures a smooth and centered pulling force as well as a constant broaching speed. The machine is primarily designed for the production of keyways up to 20mm. (From 16mm keyway tool width only with stepped tool shanks) The design of the machine allows for fast and easy setup for broaching with flat broaching tools for keyways. Thanks to the universally constructed drawbridge and machine table, broaching with both profile and flat broaching tools is possible. Profile broaching can be performed without the use of additional pull heads, by using simple centering bushings. Suitable broaching tools and arbors for the machine are available on request.

Condition: used, Year of construction: 1986, overall weight: 6,500 kg, power: 42 kW (57.10 HP), input voltage: 380 V, broaching length: 1,600 mm, number of broaching positions: 1, workpiece diameter (max.): 500 mm, Manufacturer: Varinelli Milano Italy Model: BV 25 x 1600 x 500 Year of manufacture: 1986 Weight: 6,500kg Mach. No.: 3269 General / technical data: Vertical hydraulic internal broaching machine with one broaching station Pulling force: 25,000 kg Broaching stroke: 1,600mm Broaching stations: 1 piece! Passage width between the cylinders: max. 540mm Cutting speed: hydraulically stepless adjustable from 1 m/min up to max. 8 m/min Return speed: hydraulically stepless adjustable up to max. 18 m/min Required space for the machine: see image of machine layout plan Power supply / connection value: 380 Volts 50 Hz / 42 kW Accessories / special equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is equipped with a spring-mechanical locking (DIN 1417) in the pulling bridge. The tool feeder system is hydraulically-mechanically locked. The machine has a coolant system with integrated chip conveyor for installation in a pit. Remarks: The machine is still in its original paint. It is designed for use in mass production for medium and large batches; for optimal use, a foundation (pit) is ideally required. Pulling heads and needle pushers are available on request. The machine can be inspected at our warehouse. General information We constantly have a large selection of about 80 used broaching machines with pulling forces from 3,000 kg to 63,000 kg in horizontal as well as vertical design in stock. A large part of the broaching machines in stock is ready for demonstration and inspection. If required, we can offer you used equipment such as pulling heads, needle pushers, broaching tools, and other specific accessories. We are also a contract broaching company and can assist you with technical questions from 50 years of experience in broaching technology. Kodpfswqmaxox Al Nelu

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, overall weight: 400 kg, input voltage: 400 V, broaching length: 1,000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of Manufacture: 1995 Weight: 400 kg Overhaul Due: 04/2025 by Wiemers AG General / Technical Data: Unused, fully overhauled mechanical vertical broaching machine Rausch RS 3, with CE marking Pulling force: 3,000 kg Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / workspace: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90 mm for standard keyway broaches "Rausch system" Workpiece diameter: unlimited (removable coolant swiveling system) Broaching capacity / slot width: up to 18 mm in steel (from 16 mm slot width only with stepped tool shank) Dimensions (H x W x D): 2,250 mm x 800 mm x 750 mm (H = including 3-sided safety enclosure) Motor: 2.5 kW / 3.0 kW Power supply: 400 Volt / 50 Hz Features: - Gear motor drive with 2 working speeds - Safety door with interlock system (emergency stop circuit) - Easily removable chip chute with tool rest - Externally adjustable tool length setting system (Rausch system) - Protective covers for stroke adjustment and electrical switch gear - Electrical sensing of clamping jaws (tool removal check prevents unintentional return of the pull bridge, adding extra safety for operator and tool) - Integrated coolant system - Coolant swiveling system (without electrical switching function) - Three-sided splash guard enclosure with wide front opening for working area - Extra reinforced chip basket and chip screen with magnet feature - Stainless steel operator panel with permanent labeling - 4 central lubrication points for leadscrew drive with manual grease gun - New machine documentation - CE marking by manufacturer (1995) Remarks: The machine is overhauled and the machine body has been fully refurbished. The following wear parts were replaced or renewed: - New trapezoidal screws and nuts made of cast wear-resistant bronze - All bearings and seals replaced - The entire coolant system incl. coolant/lubricant swiveling system is new - New two-speed SEW gear motor Kljdpfsw Huh Njx Al Nju - New electrical system (Siemens) - New safety door replacing the old light barrier - New clamping jaws - All sheet metal parts such as covers, chip chute, basket, screen, and spindle guard are new - Stainless steel operator panel with permanent labeling - Machine has been newly painted with 2-component structural lacquer This machine carries the manufacturer’s CE marking. General Information: The twin-spindle drive ensures quiet, centrally aligned pull and constant broaching speed. The machine is primarily designed to cut keyways up to 18 mm wide (from 16 mm tool width only with stepped tool shanks). The design allows for quick and easy setup for broaching with flat broaches for keyway slots. Thanks to the universally designed pull bridge and machine table, broaching with both profile and flat broaches is possible without requiring additional pull heads.

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set Kljdpfxocbyzuo Al Neu -Quantity: 10x reamers -Diameter: 5x Ø 35.5 mm H7 -Diameter: 5x Ø 45 mm H7 -Recording: MK -Price/Sale: only complete set -Weight: 24 kg

Condition: good (used), Machine Reamers, Reamer, Reaming Tool, Passknife Cutting Set -Machine reamer: Reamer with holder -Diameter: Ø 59 mm Kodehnffhspfx Al Njlu -Holder: DIN 219 MK5 -Total dimensions: Ø 59 x 442 mm -Weight: 5.6kg

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set -Recordings: MK1/MK2/MK3 -partially with reversible inserts -various sizes as seen in photos Kljdpfx Aljb A Razo Nsu -Sale: only complete set -Weight: 40 kg

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set -Various sizes: Ø 13-33 mm -various: recordings Kljdpjb A Rbvofx Al Nou -Sale: only complete set -Weight: 7.2 kg

Condition: good (used), Machine reamers, reamer, reaming tool, fitting knife cutting set Ksdpjucahvjfx Al Njlu -Machine reamer: Shell reamer with holder -Diameter: Ø 26 mm -Shaft diameter: Ø 16 mm -Total dimensions: Ø 25 x 120 mm -Weight: 0.3 kg

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set -Mounted reamers: Machine reamers, 20 pieces Kedpeiay E Djfx Al Nelu -Hole: Ø 16/22 mm -Diameter: 31.5 to 54.5 mm, see photo parts list -Transport dimensions: 230/210/H80 mm Total weight: 9.4 kg

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set -Mounted reamers: Machine reamers, 25 pieces -Hole: Ø 16/19/20/22 mm -Diameter: 28.5 to 53 mm, see photo parts list -Overall dimensions: 240/230/H100 mm -Total weight: 9.8 kg Kljdjiay Haopfx Al Nju

Condition: good (used), Machine Reamers, Reamer, Reaming Tool, Passknife Cutting Set Kledsiay Hhepfx Al Nsu -Reamers: machine reamers 36 pieces -Mount: Ø 16/22 mm -Diameter: 31.75 to 55 mm, see photo parts list -Transport dimension.: 240/230/H80 mm -Total weight: 18.5 kg

Condition: good (used), Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder Kledpfx Aljucag So Nju -Manufacturer: Kämpf, Mounting bracket type: MK5, 5 pieces -Type: A40 TGL 30-1226 2 pieces -Type: Ø 33 mm 3 pieces -Price/Fee: complete -Transport dimensions: 460/300/H63 mm -Weight: 23.5 kg

Condition: good (used), Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Manufacturer: Kämpf, Mounting bracket type: MK4, 6 pieces -Type: A27 TGL 30-1226 1 piece Kodpfxjucahcj Al Njlu -Type: A22 TGL 30-1226 1 piece -Type: A19 TGL 30-1226 4 pieces -Price/Fee: complete -Transport dimensions: 400/240/H46 mm -Total weight: 10.2 kg

Condition: good (used), Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Milling tool holders: 8 pieces MK4 tool holder Klsdpfx Aof Sgwrol Neu -Sizes: see pictures -Price: complete -Box dimensions: 630/330/H60 mm -Weight: 20.5 kg

Condition: good (used), Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder Kedpfx Aef Sgxael Njlu -Manufacturer: Kämpf, Mounting bracket A19 TGL 30-1226 -Recording: MK4 -Price: per piece -Number: 24 pcs. -Dimensions: Ø 34 x 350 mm -Weight: 1.6 kg/pc.

Condition: good (used), Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Manufacturer: Kämpf, Mounting bracket A27 TGL 30-1226 -Recording: MK4 -Price: per piece -Quantity: 19 pieces -Dimensions: Ø 46 x 390 mm -Weight: 2.2 kg/piece Klsdef Sgw Iopfx Al Nou

Condition: good (used), Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Manufacturer: Kämpf, Mounting bracket A22 TGL 30-1226 -Recording: MK4 -Price: per piece -Quantity: 21 pieces -Dimensions: Ø 40 x 370 mm -Weight: 1.8 kg/piece Klodpjf Sgwyjfx Al Nou

Condition: good (used), Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Manufacturer: Kämpf, Mounting bracket A16 TGL 30-1226 -Recording: MK3 Kodpfx Aof Sgw Sjl Nolu -Price: per piece -Quantity: 11 pieces -Dimensions: Ø 28 x 310 mm -Weight: 0.9 kg/piece

Condition: good (used), Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Manufacturer: Kämpf, Mounting bracket A13 TGL 30-1226 -Recording: MK3 -Price: per piece Kljdpfx Asf Sgwvjl Nju -Quantity: 14 pieces -Dimensions: Ø 24 x 295 mm -Weight: 0.8 kg/piece

Condition: good (used), functionality: fully functional, Year of construction: 1992, Vertical broaching machine with numerous holders Ksdpoy Nka Tefx Al Nolu