Used Chamfer for sale (339)

Condition: used, Milling and bevelling unit make: IMA - for double sided edge banding machine (1 unit left side / 1 unit right side) Bljdpfx Asbxp Nuoczor

Condition: good (used), Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool, internal deburrer Blsdpfx Asd Sdl Ioczer -for diameters: 20 - 60 mm -Recording: MK 3 -Quantity: 1 piece internal chamfer cutter available -Price: per piece -Dimensions: Ø 70/208 mm -Weight: 1.7 kg/piece

Condition: used, 140 x 40 x 30 mm Bljdpfxelf Nbue Aczer

Condition: excellent (used), HSS saws chamfering machine EYAN Bledpfx Acshzcd Uozer

Condition: new, MFR is a stand-alone machine intended to produce pallets on a smaller scale. How does it work? The operator manually feeds the machine with boards and the boards are then automatically chamfered. The chamfered boards are thereafter collected in a magazine. Machine specification: Standard performance Operators: 1 Length: Chamfering unit 3,7 m, total 5,9 m with the chamfered board magazine (2,2 m) included Width: 1,2 m Blodowduvnspfx Aczor Height: 1,7 m Power: 5 kW, 3x400 V+N Pneumatic system: 7 bar compressed dried air: 100 L/min Should be filled and controlled: Container for lubricating oil Cyclone hose diameter: 100 mm Cyclone fan capacity: 1000 m³/h Machine capacity: 12 boards/min (max length 1600 mm) Standard equipment: 1 separate electric motor 3 kw 2800 r/m 2 cutters 4000 r/m

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 43100, total height: 9,650 mm, Mechanical engineering from Innovative and reliable Machines for weld seam preparation and sheet metal processing Quicker high-speed beveling machine using the roller shear method for beveling technology. These QUICKER machines work according to the roller shear method. In this process, a long chip is from the sheet edge by means of a slowly rotating cutting wheel. This enables This achieves speeds of up to 3.1 m/min (up to 5 times faster than conventional methods). The efficiency is also increased by the low wear of the tool cone. This process is one of the most efficient ways of preparing weld seams. The cost savings of up to 75 % compared to conventional methods. Fast, compact, handy and with infinitely variable angle adjustment from 15° to 55°, this machine is one of the most popular chamfering machines. one of the most popular chamfering machines. The practical scissor lift truck can be adjusted over a wide range for adjustable over a wide range. This allows the machine to easily move past the fixed sheet metal panel. move past the fixed sheet. Of course, the Quicker II can also be operated with a crane. This machine is rotated by 180° for processing bottom chamfers. The holes on the on the upper side match those in the machine feet. Many customers have ordered two of these machines ordered two of this machine. One for the top bevel and one for the bottom bevel. Spare parts can be obtained quickly and tools, such as cutting wheels for steel and stainless steel, are available from stock. ROLLER SHEARING MACHINE GECAM QUICKER GECAM QUICKER - BEVELING MACHINE, STRONG AND HANDY, INFINITELY VARIABLE ANGLE ADJUSTMENT - Precise adjustment of the bevel angle and the bevel dimension - Stepless angle adjustment 15°-50 - Tools available for all materials - Clear view of the cutting process - For the upper bevel and convertible for the bottom bevel - Stable sheet metal guide for safe chamfering - Chamfering of sheets and tubes - 5 x faster than conventional processes - Highly economical - Low tool wear - Low maintenance - Optional: Lifting carriage for QUICKER with infinitely variable height adjustment (working height approx. 860 mm - 1,200 mm) Europe Technical data: Quicker Bevel capacity at 400 N/mm²: 10 x 10 corresponding to 14 mm bevel at 45° Bledpfxeqvm Uro Aczsr at 600 N/mm²: 8 x 8 corresponding to 11 mm bevel at 45° Max. Sheet thickness (mm) 6 - 30 (40) Bevel angle (°) 15 - 50, infinitely variable Cutting speed (m/min) approx. 3.1 Dimensions (mm) 530 x 650 x 400 Weight (kg) 78 Motor power 4 / 3 Advantages: V 2020/10

Condition: excellent (used), Year of construction: 1995, Chamfering unit, suitable for BIHLER GRM 50 or GRM 80 wire diameter range: 2,5 - 5,5 mm Bjdpfx Aoi Tza Usczolr

Condition: excellent (used), PLASTIC PIPE CUTTER ROCUT 110 Bljdevb Ik Iepfx Aczjr BY ROTHENBERGER 55035 ROTHENBERGER pipe cutter 50-110mm Manufacturer code 55035 TECHNICAL DATA pipe diameters - 50, 75, 110mm pipe chamfer angle - 15° . PRODUCT DESCRIPTION Tool designed for cutting and chamfering thin- and thick-walled PVC, PE, PE-X and PVDF pipes, as well as attenuated sewer pipes. Simultaneous chamfering around the entire circumference of the pipe through a steel cutting mandrel with an automatic kicker. Centric and secure clamping on the pipe taking into account the dimensional tolerance thanks to infinitely adjustable jaw pressure with spring compensation.

Condition: used, Year of construction: 2000, pointing milling machine für Stangen carbide turnover plates 4 Stück working area Rund, Profil+vierkant mm working range 80 (100) an 25 mm milling drive 380/420V, 18,5 KW, 50 Hz kW revolutions per minute Fräsantrieb: 1465 U/min . clamping devices hydraulic pneumatic hydraulisch infeed device hydraulisch ca. 5 lfdm x 300 mm hydraulic power unit Rexroth tank 250 l coolant tank mit Spänekasten l switchgear cabinet mit Klimaanlage control SIEMENS S 7-300 +++++ Please note: Bedog Akgtopfx Aczslr The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Technical details: voltage: 380 V total power requirement: 4,0 kW machine weight approx.: 1270 kg dimensions L x W x H: 1,4 x 1,0 x 1,9 m Bedpfxsu Ngfdo Aczslr EDGE CHAMFERING MILLING MACHINE Application: Beveling of circular blanks and flat material -smallest straight edge = 3mm -max. breaking strength of the material = 70 kp/mm (690 N/mm²) -max. feed rate: at 10mm bevel width = 3,1 m/min. at 15mm bevel width = 2,9 m/min. at 20mm bevel width = 2,7 m/min. at 25mm bevel width = 1,5 m/min. with degree adjustment (bevel angle) 25° - 55°. scale for setting the straight edge downholder manual with handwheel cutting wheel size Ø 200mm; teeth fine / medium / rough Support block size: D:220 x W:620 x H:350mm; driving wheel approx. Ø 350 x 100mm; display via linear scale *

Condition: new, Semi-automatic chamfering machine Development and production in England - Automatic chuck with material sensor - automatic spindle start when the cutting head moves - max. speed 1,500 rpm - max. bar diameter 80 mm - bar support adjustable - max. chamfering/turning length 37 mm - precision three-jaw chuck - large chip collector for easy cleaning - easy to move with pallet truck - weight 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE - certified Bjdpscacn Eefx Aczjlr OPTION: - Oil cooling (mist) € 3.250,- - adjustable fence + universal chamfering tool € 1.870,-

Condition: ready for operation (used), Dowel Cutting and Chamfering Machine Manufacturer: Löser Type AA 200 Table-top machine for the production of wooden dowels, for the efficient cutting and chamfering of dowel rods/round bars. The Type AA 200 Dowel Cutting and Chamfering Machine is a low- to medium-performance machine. It can cut and chamfer round bars made of wood, plastic, laminated paper, and other materials. The dowel length is adjustable between 20 and 150 mm and is determined using a setting scale. The chamfer thickness can be adjusted as required. The machine is equipped with a magazine ring as standard. This allows the operator to operate several machines simultaneously or perform other tasks. The machine features a solid, torsion-free cast iron stand. Extremely easy operation, simple maintenance, and easily accessible lubrication points are further advantages of this machine. Technical specifications: For dowel diameters approx. 6-13 mm Minimum cutting length: 15 mm Bedpfowmpvhsx Aczslr Largest cutting length: 150 mm Output: approx. 2,000 pieces per hour Weight: 53 kg (tabletop machine) Including adapters for dowel diameters 8-9 mm, 10-11 mm, and 12-13 mm. The pinion and chain have been replaced.

Condition: excellent (used), HSS saws chamfering machine Peruzzi model SAUT 550, fully reconditioned and newly painted, like new Bsdpfx Acohzcctjzslr

Condition: excellent (used), Year of construction: 1985, wire rod diameter range: 3,0 - 10,0 mm wire rod length: 100 - 1.000 mm output: 60 - 120 rods per minute Bsdpfxew Euz Tj Aczjlr *complete with tools for wire diam. 3,5 - 4,0 - 5,0 - 6,0 - 8,0 mm*

Condition: used, Bar pointing/chamfering machine PAREX Bedsxdnwpepfx Aczelr

Year of construction: 1991, condition: used, max. wheel diameter 400 mm max. number of teeth 150 max. module 5 total power requirement 16 kW Bsdpfst Hwyljx Aczjlr weight of the machine ca. 10 t Workpiece Ø, min./max. 30 - 400 mm Number of teeth 6 - 150 Module range, max. 5 Tool holder shaft Ø SK 30 / 20 Tool speeds 4,000 rpm Spindle drive max. infinitely variable 1.8 kW Feeds, longitudinal and cross 0.001 - 12 m/min Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm Workspindle slide 400 mm Tool speed, max. 3,000 rpm Tool holder SK 30 Total electrical load, approx. 16 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. * 2 workspindle units, left and right, which can be set at any angle. * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide. * L and O Axes for milling spindle. C Axis for workspindle rotation. * Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control. * Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air. * Coolant equipment with chip conveyor. * Noise protection cabin. * Central lubrication. * Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc. The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available on stock.

Condition: reconditioned (used), Year of construction: 1985, In 2020, the machine was extensively overhauled for €7000. Proof available. Working processes: - 60° chamfering - longitudinal turning up to maximum 40 mm - Center drilling Work process fully automatic: - Clamping, chuck closed - rapid traverse forward - Work feed - Dwell time for cutting out - Rapid traverse back - Unclamp, chuck open Technical data: Bodjiamn Sjpfx Aczelr max. workpiece diameter round 80 mm max. workpiece diameter hex-SW 70 mm min. workpiece diameter round and hex 10 mm min. Workpiece length 450 mm Speed range stepless Stage I/Stage II = 51-306/102-612 Electrical equipment 220/380 V, 50 Hz Motor power main motor kW 1,3/1,8 Motor power coolant motor kW 0,07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 560x500x580 mm Bjdsvz Hf Depfx Aczjlr Weight 80 kg Total power requirement 0,75 kw

Year of construction: 1991, condition: used, max. wheel diameter 0 mm max. number of teeth 0 max. module min. module Blodpst Hwv Hefx Aczor total power requirement kW weight of the machine ca. t dimensions of the machine ca. m CNC controlled milling machine for synchronous rings

Condition: new, Semi-automatic chamfering machine Development and production in England - Automatic chuck with material sensor - automatic spindle start when the cutting head moves - bar diameter 26-105 mm a 2nd cutting head is required for smaller diameters - adjustable bar support - max. chamfering/turning length 45 mm - Overturning & chamfering tool - precision three-jaw chuck Bjdpfxogkah Te Aczolr - large chip collector for easy cleaning - easy to move with pallet truck - Weight approx. 500 kg Dimensions L/W/H 800x500x1250 mm 1 year guarantee CE - certified OPTION: - adjustable fence + universal chamfering tool € 1.870,-

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1000x900x1400 mm Weight 680 kg Total power requirement 12 kw Bsdpfx Aovz E Uqeczelr

Year of construction: 1975, condition: used, max. wheel diameter 280 mm max. number of teeth 100 max. module 6 min. module 1 total power requirement 6 kW weight of the machine ca. 2500 kg Blodpfxjt Hw Dks Aczor dimensions of the machine ca. m

Condition: new, Automatic chamfering and starting machine Development and production in England - CNC Mitsubishi control M70 - automatic start of the cycle Bsdpecb E Hnofx Aczelr - automatic switch-off for repeatable chamfering lengths - color touch screen control panel - max. spindle speed 3,000 rpm - bar diameter 8-80 mm - hydraulic 3-jaw chuck - cutting head suitable for all material sizes - quick-change ISO cutting inserts - max. chamfering/ turning length 37 mm - 4 kW motor - high-precision Mitsubishi servo drive - Ball screw drive with high thrust capacity - Large machine door - Internal, powerful LED work light - Spoke collection container with external spoke basket - Lifting points for pallet truck - Weight 500 kg - Dimensions L/W/H 1000x600x1200 mm CE - certified OPTIONS - Oiling (oil mist): € 2.890,- - Universal chamfering head: € 1.040,- - 8kW motor for hard materials: € 4.150,-

Condition: new, Manual chamfering machine Development and production in England - Variable adjustment of spindle speed - max. bar diameter 26-105 mm a 2nd cutting head is required for smaller diameters - Adjustable bar support - max. chamfering/turning length 45 mm - Overturning & chamfering tool - precision three-jaw chuck - large chip collection container for easy cleaning - easy to move with pallet truck - Weight approx. 500 kg Dimensions L/W/H 800x500x1250 mm 1 year guarantee CE - certified Blsdpfx Acsgi Rnwszer OPTION: - adjustable fence + universal chamfering tool € 1.870,-

Condition: new, Manual chamfering machine Development and production in England - Variable adjustment of spindle speed - Max. bar diameter 80 mm Bsdpfx Acobwfh Uezjlr - Adjustable bar support - max. chamfering/turning length 37 mm - Precision three-jaw chuck - Large chip collection container for easy cleaning - easy to move with pallet truck - weight 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE - certified OPTION: - adjustable fence + universal chamfering tool € 1.870,-