Used Bubble Wrap for sale (862)

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Dujdpfx Aou Tg I Dsg Rer Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: ready for operation (used), Ref: MM6380 Sovereign twin head labelling machine with conveyor system, manufactured in 2020. The machine is currently in working order and in use. Fitted with a Markem-Imaje SmartDate X45 thermal transfer printer for date and batch coding. Details Twin head labeller (wrap application) Integrated conveyor with adjustable guides Omron touchscreen control Label size currently used: approx. 100mm (W) x 375mm (H) Set up for tray labelling (C-wrap) Specification Manufacturer: Sovereign Labelling Machines Ltd Year: 2020 Serial Number: 001070 Voltage: 230V AC Current: 16A Frequency: 50Hz Power: 3.68 kW Condition Machine is fully operational and can be seen running. Duodpfjywb T Tox Ag Rjr Notes Currently configured for C-wrap trays. Any change to other formats (e.g. D-wrap) may require adjustment or additional parts. Located in Northern Ireland

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 05/2027, working width: 320 mm, conveyor belt width: 320 mm, type of input current: three-phase, total width: 590 mm, total length: 680 mm, total height: 1,220 mm, Croissant Rolling Machine Erka WMA 30 Rolling band width: 320 mm For all stick products such as Kornspitz and pretzel sticks, Dedjw Tubuopfx Ag Rjur robust and simple technology Mobile croissant rolling machine Connection: 400V, 16A-CEE plug Dimensions: 590 x 680 x 1220-1300 mm (W x L x H) Used machine, overhauled with warranty and spare parts service Quality from a specialist workshop! Benefit from over 35 years of experience! Options: Maintenance contract Feeding device E-box for increased safety Service package Delivery service Training & commissioning We have many more croissant rolling machines in stock!

Year of construction: 2020, condition: used, Fully Automatic Wrapping Machine. Year 2020. Suitable for shrink-wrapping doors, frames, architrave etc Ring Diameter 1100mm Conveyor height 870 - 900mm Conveyor width 750mm Infeed conveyor length 1300mm Intermediate conveyor length 1800mm Outfeed conveyor 1300mm Conveyor load capacity 120 kg / m Max Crown rotation velocity 80 Total Weight 710kg Installed Power 3.00kw Dusdpfeymnclsx Ag Rsr Power Supply 400v, 50 hz 3 Phase and Neutral Working Pressure 5 - 7 Bar

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Replay 55 EVO The Minipack Replay 55 EVO is a manual shrink film packaging machine with hood, designed for medium production volumes. – Throughput up to 300 units per hour – Usable sealing bar dimensions: 540 × 390 mm – Max. product dimensions: 500 × 380 × 200 mm – Max. film roll dimensions: Ø 250 × 600 mm – Working table height: 925 mm Dodpjx Tr N Dsfx Ag Rjur – Machine dimensions (closed): 1,260 × 810 × 1,165 mm – Machine dimensions (open): 1,260 × 810 × 1,310 mm – Machine weight (net/gross): 105 / 126 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, MINIPACK MEDIA The Minipack MEDIA is a compact, semi-automatic packaging machine featuring L-shaped sealing and an integrated shrink tunnel. Its monoblock design makes the machine particularly space-saving. – Teflon-coated sealing bars for reduced smoke emission – Production capacity up to 750 pieces per hour – Sealing bar dimensions: 540 × 400 mm – Max. film roll width: 600 mm – Max. film roll diameter: 350 mm – Tunnel entry dimensions: 440 × 240 mm – Working table height: 875 mm – Machine dimensions (closed): 2,780 × 730 × 1,400 mm – Machine weight: 286 kg (net) Dusdsx Ttbhspfx Ag Rjr – Motorized waste rewinder as standard

Condition: like new (used), Year of construction: 2019, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 22000 - 10000, input voltage: 240 V, The machine was purchased in 2019 and has never been used. Only FAT/SAT commissioning has been carried out (no production). Various format parts are available and will, of course, be included in the sale. The machine can be inspected at any time by appointment. Additional photos are available upon request. Serious offers are always welcome. Transport can be arranged by mutual agreement. If you have any questions or comments, please feel free to contact us. Djdpfoyx Sk Eex Ag Rjur

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 3704, Volt: 220 // Hz: 50 WITH PEDAL Dusdpfxjyyv R Sj Ag Ror

Condition: refurbished (used), Herma semi automatic wrap labeller, Allen Hotfoil Encoder, with spares and manual, all mounted on stainless table, 1Ph Duodsib Dcrepfx Ag Rjr

Condition: like new (used), Ilapak stainless flow wrapping and shrink tunnel line Carrera 2000 PC Duodsd I Ncgepfx Ag Ror stainless flow wrapper, dual jaw operation, jaw width 180mm, dual film reel holder with automatic film reel splicing, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, this Ilapak has been running on Printed Film and has ability for PEC, the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas, also comes with Ilapak Indy fast feeder and Ling stainless shrink heat tunnel

Condition: ready for operation (used), Year of construction: 2002, A film wrapping machine Heine Ilsemann is available. Materials: polypropylene/cellophane/PVC/coated paper, output: 200cycles/min, connected load: 8kW, machine dimensions X/Y/Z: approx. 3500mm/1100mm/2000mm, weight: approx. 2200kg. An on-site inspection is possible. Duodpfsyyplpox Ag Ror

Condition: good (used), total length: 5,000 mm, film width: 550 mm, product height (max.): 150 mm, product width (max.): 400 mm, product length (min.): 80 mm, Equipment: documentation/manual, Shrink Film Packaging Line Manufacturer: Hugo Beck Model: Flexo 500 S Horizontal film packaging machine with side sealing for tubular film, comprising film wrapping machine and downstream shrink tunnel. The intermittent motion tubular bag machine Flexo 500 impresses with its outstanding versatility and flexibility. Whether for frozen pizzas, biscuit boxes, fruit and vegetables, books, skis, laminate flooring, or various household products, this machine equips you to handle any application quickly and efficiently, ideal for daily changing production orders. - Film Wrapper Hugo Beck Flexo 500 S, Year of manufacture: 2003 Workpiece dimensions: Width: approx. 55 - 400 mm Djdpfxjyw H Rks Ag Rsur Height: approx. 2 - 150 mm Length: from min. approx. 80 mm, theoretically unlimited Consumables/Film: Center-folded (half-tube) film, PE, PP Roll diameter: 350 mm Film width: 550 mm Feed rate: approx. 20 m/min Rated voltage: 400/230 V, 50 Hz, 3 phase Rated current: 5 A Connected load: 3 kW Machine dimensions: approx. 2500 x 1500 mm (LxW) Weight: approx. 650 kg - Shrink Tunnel Hugo Beck Type HV 601, Year of manufacture: 2002 Working width: approx. 600 mm Pass-through height: approx. 300 mm Feed rate continuously adjustable Chain rod transport, silicone-coated transport rods Temperature control via electronic thermostat, separately adjustable top and bottom heat Heating capacity: approx. 4 - 12 kW Rated voltage: 230/400 V, 50 Hz, 3 phase Rated current: 19 A Connected load: approx. 12 kW Machine dimensions: approx. 2500 x 1100 mm (LxW) Weight: approx. 400 kg

Year of construction: 2005, condition: used, Built in: 2005 Capacity: up to 35 pallets/h Film width: 500 mm Diameter: max 260 mm Core diameter: max 76 mm Duedpfx Aec Icd Ueg Rjr Film thickness: 17-30 mµ Equipment • infeed belts • delivery belts

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 04/2027, working width: 800 mm, conveyor belt width: 800 mm, type of input current: three-phase, Compact pretzel long rolling machine with croissant rolling attachment Universum Kasper model: LWT 3/80 Premium EB II W 20 Suitable for all stick products like Kornspitz and pretzel sticks, etc. Universal combination rolling machine For all doughs for rolling and elongating Maximum long-roll width: 800 mm Robust engineering Djdpjwpzl Hsfx Ag Rsur Dough insertion from 40 to 300 grams Stainless steel construction With EB2 feeding unit Suitable for bread roll production lines DGUV V3 safety tested – exclusively by us Connection: 400V, 16A-CEE plug Used machine, refurbished and SAB-tested With warranty and spare parts service Visit our large bakery machine showroom!

Condition: like new (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, input voltage: 400 V, DGUV certified until: 04/2027, working width: 550 mm, conveyor belt width: 650 mm, type of input current: three-phase, total width: 840 mm, total length: 1,300 mm, total height: 1,250 mm, input frequency: 50 Hz, Croissant Rolling Machine Gio 4 CF with long roller with infeed belt Weight range approx.: 50–2000 g depending on TA for the production of sticks, loaves, and croissants Maximum rolling width: 550 mm Long roller adjustable up to 650 mm width Stainless steel design, mobile Dimensions approx.: 840 x 1300 x 1250 mm (W x D x H) Duodpfxjw Tub Io Ag Ror Used machine with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Delivery Maintenance contract Service package Instruction & commissioning More long rollers in stock!

Year of construction: 2009, condition: good (used), Built in: 2009/2005 Size: min 100 x 120 mm max 300 x 430 mm Thickness: max 40 mm Film thickness 20-100 mµ Mechanical speed: 25,000 Ex./h Equipment: • 10 stations rollstream ROS • 1 VSE-ROS-ES-RE-300-KWE twin multi disc unwind station AWS • 4 MTD-AWS-OWK • built in 2005 JET Feeder • 8 JEF-450-FVM-SA190 • built in 2005 foil wrapping machine CMC 2800 • with two feeders • built in 2009 twin stacker CMC Djdoc Icm Repfx Ag Reur

Year of construction: 2000, condition: used, 3 feeders 1 folding station adressing unit Sitma 950 foil wrapping machine infeed to the stacker with reject unit stacker Dusdpfx Agjdiykno Rsr belt delivery

Condition: good (used), Built in 1996 Djdpfx Ajd Tnh Isg Rsur

Condition: ready for operation (used), Rebuilt 2016 Duedpfedykhpsx Ag Rer Size (mm):: 200 x 420

Year of construction: 2004, condition: ready for operation (used), Built in: 2004 Format range width: 200-420 mm Length: 200-420 mm Height: 30-400 mm Dedod N S Adspfx Ag Rsur Speed: bundles/min 25 Pakete/min Width of film: max 550 mm Film thickness: 12-80 mµ Diameter of film reel: max 350 mm

Year of construction: 2000, condition: good (used), Built in 2000 Film wrapping machine max speed: 20 bundles/min max products width: 200-420 mm max products length: 200-420 mm Dsdpfxjg Du A He Ag Reur max products height: 50-400 mm Operation: from left or right Electrical: 400 VAC, 3 Ph, N+PE, 50 Hz, 2,5 kW Dimensions (L x W x H): appr. 1100 x 950 x 2100 mm Weight: ~550 kg Packaging material: PE flat film, reel width 500 mm, thickness 12-80 µm, film reel diameter max 350 mm"

Condition: good (used), Height: max 1,800 mm Pallet format: max 1,000 x 1,200 mm Speed: max 30 pallets/h Electrical system: 380 VAC Electrical system: 50 Hz Electrics: 3 PH Clamping force: max 5,500 N Equipment - Strapping machine: XP-112 MV - Sealing head CFH-1 - Stretch wrapper: GL-215 Dujdpjqqkx Nofx Ag Rjr - Control system: S7

Year of construction: 1999, condition: ready for operation (used), Built in: 1999 Size: max 500 x 500 mm min 200 x 120 mm Packet height: max 500 mm min 50 mm Width of film: max 600 mm Diameter of film reel: max 300 mm Film thickness: 12 - 100 mµ Duodpfx Aed N D Ncog Rsr Speed: max 1560 c/h Power requirements: 4,5 kW (220/380V, 50Hz) Width: 1000 mm Depth: 1230 mm Height: 2065 mm Weight: 500 kg (approx.) Equipment: • shrink tunnel 6217 • transport belt 6214 and shuttle worth 6264

Year of construction: 2001, condition: good (used), Build in :2001 (Cyklop XZE-311-22), 2001 (Cyklop GL 2000) Description/configuration: Complete line for automatic pallet strapping (double or cross), automatic stretch-wrapping of pallets. Includes fully automated pallet conveying. Complete line with multiple infeed positions, configured as follows: > infeed conveyor with fenders (bump protection), motorized, l~1500 mm, REF 25643.02 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.02 > chain transfer conveyor, motorized, l~3700 mm, REF 25463.03 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.04 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.05 > roller conveyor, with fenders (bump protection),motorized, l~1500 mm, REF 25643.06 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.07 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.08 > chain transfer conveyor, motorized, l~3000 mm, REF 25463.09 > chain transfer conveyor, motorized, l~3000 mm, REF 25463.10 > roller conveyor (buffer), motorized, l~1800 mm, REF 25643.11 > pallet strapper Cyklop XZE, REF 25643.30 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.12 > roller conveyor underneath wrapper, motorized, with pallet lifting device, l~2100 mm, REF 25643.13 > pallet film wrapper GL 2000 ring style, REF 25463.40 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.14 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.15 > 90° turntable conveyor, motorized, l~1800 mm, REF 25643.16 > roller conveyor (buffer), motorized, l~1500 mm, REF 25643.17 > pick-up position for strapped & wrapped pallets, with fenders (bump protection), motorized, l~1500 mm, REF 25643.17 max speed in pallets/h: 50 pallets/h Roller conveyor, Chain conveyor (transfer conveyors) Pallet width of up to 800 mm Pallet length of up to 1200 mm max height full pallet (max passage height): ~2000 mm max weight full pallet: 1500 kg Over all length equipment: ~16000 mm Over all width equipment: ~9000 mm Over all height equipment: ~4200 mm Voltage: 400 V, 3 Ph, 50 Hz Air requirement: 6 bar Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1 hrs), Berlin (~2 hrs) Dsdpfx Agehtmp Tj Reur

Year of construction: 2004, condition: good (used), Build in 2004 Description/configuration: Complete line for automatic pallet strapping, automatic stretch-wrapping of pallets. Includes fully automated pallet conveying. Line with ""straight""-configuration, built with chain conveyors and configured as follows: > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.01 > pallet strapper Cyklop XZE-3111, REF 25778.30 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.02 > Straight chain conveyor underneath wrapper, motorized, travel is long side leading, l~2600 mm, REF 25778.03 Duodpehrmlkjfx Ag Rsr > ring style pallet film wrapper Cyklop GL 2000, REF 25778.40 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.04 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.04" Layout available max speed in pallets/h: 50 pallets/h Chain conveyor Pallet width of up to 800 mm Pallet length of up to 1200 mm max height full pallet (max passage height): ~1700 mm Height of pallet conveying (min=300mm): ~400 mm max weight full pallet: ~1500 kg Over all length equipment: ~8000 mm Over all width equipment: ~6000 mm Over all height equipment: ~3500 mm Input Power: ~15 kw (whole line) Voltage: 400 V, 3 Ph, 50 Hz Air requirement: 6 bar Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1,5 hrs), Leipzig (~2hrs), Berlin (~2,5 hrs) Condition: cleaned & in working conditions Machine available: upon request