Used Business Card Cutting for sale (20,103)

Year of construction: 1996, condition: ready for operation (used), A horizontal miter saw Kaltenbach is available. Saw blade dimensions X/Y/Z: 3830mm/27mm/0.9mm, saw blade speed: 100m/min, working height: 700mm, max. cutting range round material: 305mm, max. cutting range square material: 360mm/305mm. Machine dimensions X/Y/Z: approx. 2300mm/1450mm/1650mm, weight: approx. 800kg. An inspection on site is possible. Chjdpfx Absx Dcaxs Djb

Year of construction: 2014, condition: ready for operation (used), A complete Soitaab waterjet cutting system, which until the year 2023 was only a demonstration machine, is available. 1) Main system Soitaab Thesis 2040, year of manufacture: 2014, cutting dimensions X/Y/Z: 4000mm/2000mm/200mm, control system: Soitaab 905unoS, control system year of manufacture: 2023, overall system dimensions X/Y/Z: approx. 5400mm/3300mm/2100mm. 2) High pressure pump KMT Neo 50, year of manufacture: 2022, max. operating pressure: 4100bar, last service: 09/2025. 3) Abrasive unit KMT Feedline V, year of manufacture: 2015. Including a storage container Müller, container capacity: 1000kg. Documentation available. An on site inspection is possible. Cjdox Ih D Hjpfx Ab Djhb

Year of construction: 2008, condition: ready for operation (used), Working dimensions X/Y: 2000mm/1500mm, max. clearance height: 70mm, max. material width: 1690mm, speed: 2m/min, acceleration: 18m/s², resolution: 0.001mm, accuracy: +/-0.05mm, repeatability: +/-0.05mm, laser source: Rofin ScX series 300W, laser class: 1, laser power: 300W. The laser source is defective. Including shuttle table, cooling unit, hydraulic unit and register mark recognition camera. Documentation available. An on-site inspection is possible. Chedpfjyi E Eisx Ab Dob

Year of construction: 1987, condition: ready for operation (used), Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible. Codsrgahxepfx Ab Djhb

Condition: ready for operation (used), Year of construction: 2008, Laser type: CO2, laser power: 2.2kW, working range X/Y/Z: 1500mm/3000mm/100mm, max. material thickness: aluminum: 8mm, mild steel: 10mm, stainless steel: 6mm, max. workpiece weight: 890kg. Positioning speed X/Y: 100m/min, simultaneous positioning speed: 140m/min, total energy consumption: 37kW, max. sheet weight: 70kg/m². Dimensions X/Y/Z: 6000mm/6400mm/2150mm, weight: approx. 13500kg. Cjdpsttv T Sofx Ab Djhb

Condition: ready for operation (used), Year of construction: 2005, operating hours: 32,000 h, Offered is a 3-axis CNC tube flame cutting system. Tube diameter: 60mm-500mm, square profiles X/Y: 420mm/420mm, tube length max.: 4500mm, wall thickness max.: 1mm-20mm, cutting speed max.: 24000mm/min, positioning accuracy: approx. 0.5mm, clamping force of the chuck: 30000N, torque max.: 13000Nm, cutting system: Hypertherm Powermax 1650, controller: Burny 10 LCD Plus, machine dimensions X/Y/Z: approx. 4000mm/2000mm/1800mm. The controller has a defect and is currently without function. Viewing possible by appointment. Cedpfsy Ax T Uex Ab Dehb

Year of construction: 1998, condition: ready for operation (used), A CNC glass cutting system Lisec in need of repair is available. Glass thickness range: 3mm-12mm, min. glass dimensions X/Y: 1600mm/1600mm, max. glass dimensions X/Y: 6000mm/3210mm, max. cutting speed: 120m/min, max. transport speed: 40m/min, cutting accuracy: +/-0.15mm, max. table load: 35kg/m², max. payload: 600kg, weight: approx. 6400kg. The X-axis of the machine has a fault. The system can cut diagonally and circularly and automatically grind the glass edges. Documentation available. An on-site inspection is possible. Cedpfjy Eg A Nsx Ab Dohb

Year of construction: 1998, condition: ready for operation (used), Travel X/Y/Z: 2520mm/1550mm/300mm, max. sheet dimensions X/Y: 5040mm/1550mm, max. material thickness mild steel/stainless steel/aluminum: 12mm/6mm/3mm, max. workpiece weight: 330kg, positioning speed: 80m/min/80m/min/60mm/min, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 5650mm/3650mm/2100mm, weight: approx. 6600kg, operating hours: 29499h. Including Fanuc Laser-Model C1500. Documentation available. On-site inspection is possible. Chsdpev Ip R Ajfx Ab Dsb

Year of construction: 1999, condition: ready for operation (used), Working range X/Y: 1200mm/1600mm. Travel Z: 250mm. Max. table load: 80kg/m². Rapid traverse: 500mm/s. Machine dimensions X/Y/Z: approx. 2500mm/2000mm/1700mm. The machine is partially defective. On-site inspection is possible. Chedpfxswty Eaj Ab Dsb

Condition: used, machine/vehicle number: 11629, Rotor diameter: 450 mm Rotor width: 800 mm 5 x 5 blade rotor (offset) 2 rows of stator blades Cedpfsyr Tlvjx Ab Dshb Inlet cross-section approx. 600 x 800 mm Drive motor 55 kW With soundproof box, mobile

Condition: used, machine/vehicle number: 9993, 9-blade rotor 3 rows of stator blades Rotor diameter 400 mm Chedpoyr Tk Eefx Ab Deb Working width 500 mm Inlet cross-section for window profile bars approx. 200 x 460 mm Drive motor 30.0 kW

Condition: used, Rotor diameter: 700 mm Chedsyr Twxjpfx Ab Djb Rotor width: 1250 mm Rotor blades: 5 rows Stator blades: 2 rows Inlet cross-section approx. 700 x 1250 mm Drive motor: 75 kW

Condition: used, machine/vehicle number: 13276, Rotor diameter: 450 mm Rotor width: 300 mm Csdpfx Aboyr Twfj Djhb Rotor blades: 9 Stator blades: 2 Inlet cross-section approx. 370 x 170 mm Drive motor: 45 kW

Condition: used, machine/vehicle number: 14039, Rotor diameter: 260 mm Rotor width: 410 mm Rotor knives: 3 Chjdpfxoyr Tzke Ab Deb Stator knives: 2 Infeed opening approx.: 410×600 mm Drive motor: approx. 11 kW

Condition: used, machine/vehicle number: 13260, Rotor diameter: 600 mm Rotor width: 1000 mm Rotor knives: 5 Stator knives: 2 rows Infeed opening approx. 720 x 980 mm Drive motor: 75 kW Wet mill Chodpfxoyr Txco Ab Dob

Condition: used, machine/vehicle number: 13206, Rotor diameter: 300 mm Rotor width: 400 mm Rotor blades: 3 Stator blades: 2 Inlet cross-section approx. 300 x 400 mm Cjdpfx Ajyr Tv Ijb Djhb Drive motor: 15 kW

Condition: used, machine/vehicle number: 12464, Rotor diameter: 420 mm Rotor width: 650 mm Chedpfx Absyr Tn Rs Dob 5-knife rotor 2 rows of stator knives Feed opening approximately 420 x 650 mm Drive motor: 37 kW

Condition: used, machine/vehicle number: 12598, Rotor diameter: 600 mm Rotor width: 1450 mm 7-knife rotor Cedoyr Tpzopfx Ab Dehb 3 rows of stator knives Infeed opening approx. 780 x 1490 mm Drive motor: 132 kW

Condition: used, machine/vehicle number: 12625, Rotor diameter: 800 mm Rotor width: 1500 mm 6-knife rotor 4 rows of stator knives Cjdpfx Aboyr Tqfo Dshb Infeed cross-section approx. 820 x 1500 mm Drive motor: 160 kW

Condition: used, machine/vehicle number: 12948, Rotor diameter: 300 mm Csdpfx Aeyr Tr Asb Dshb Rotor width: 600 mm Rotor blades: 3 Stator knife: 4 Inlet cross-section approx. 300 x 600 mm Drive motor: 30 kW

Condition: used, machine/vehicle number: 12949, Rotor diameter: 400 mm Rotor width: 600 mm Rotor blades: 3 Stator blades: 2 Chjdpfxjyr Trve Ab Deb Inlet cross-section approx. 400 x 600 mm Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 3349, 2-blade double rotor Chjdpfxsyr Thws Ab Dsb 3 rows of stator blades Rotor diameter: 150 mm Working width: 200 mm Inlet cross-section: approx. 350 x 210 mm

Condition: used, machine/vehicle number: 10875, 3-blade rotor 2 rows of stator blades Rotor diameter: 280 mm Chjdjhqt Hpspfx Ab Dob Rotor width: 600 mm Inlet cross-section: approx. 280 x 600 mm Weight: approx. 800 kg

Condition: used, machine/vehicle number: 11481, Rotor diameter: 300 mm Rotor width: 600 mm 3-blade rotor 4 rows of stator blades Chedpfxjyr Tkxo Ab Dsb Inlet cross-section approx. 250 x 600 mm Drive motor 37 kW

Condition: used, machine/vehicle number: 8802, Infeed cross-section approx. 650×1000 mm Chodpsyr Tiuefx Ab Djb 3-knife rotor (knives arranged offset) 2 stator knife rows Rotor diameter 500 mm Rotor width 1000 mm