Used Cutting-Off Machine for sale (73,262)

Condition: used, functionality: fully functional, Year of construction: 2008, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. Fpjlhozy Ullecdw Isl For sale is a laser welding system manufactured by TRUMPF, model: TLC 1000P.

Condition: good (used), Cut-off and cut-to-length machine Storage number: 3117 Manufacturer: presumably HAAS Year of manufacture: 1982 Machine number: Type / Model: Duoschliff Cutting wheel speed: Grinding wheel speed: Cutting wheel diameter: 90 mm Grinding wheel diameter: 100 mm (cup wheel) Workpiece length: 300 mm Motor: 0.25 kW Accessories/Equipment: Condition: good Fpolhszmp Arjcdw Isl Weight: 50 kg Dimensions: 340 x 800 x 300 mm

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 5067, total width: 450 mm, total length: 500 mm, input voltage: 220 V, total height: 400 mm, cutting width (max.): 108 mm, number of blades: 2, table height: 600 mm, Equipment: CE marking, Hot & Cold Automatic Strip Cutting Machine Fpjlhcdszut Axsw Ijl It can cut elastic, webbing (up to ¼" thick), ribbons, belt loops, hook and loop fasteners, nylon cords, leather, safety belts, rubber, and vinyl. FEEDING SPEED – adjustable up to 13 inches per second. • CUTTING LENGTH – approximately 400 ft. • CUTTING WIDTH – 4 inches. • TOLERANCE – 0.05% of the total cut length. • QUANTITY – up to 99,999 pieces. • COUNTER – pre-set up to 99,999. • SAFETY – knife cover sensor – automatic stop when the roll ends. • AUTO – feed/reverse.

Condition: good (used), Polar Mohr 137 XT Autotrim Paper Cutting Guillotine The machine is fully functional and in very good condition. Reviewed and ready to use. This is the most respected guillotine brand, a flagship product. Technical specifications: Cutting width: 1370mm Stack height: 165mm Programmer with touchscreen display Autotrim – a split front table for removing trim Includes the original steel basket. Comb cutting adjustment from the machine’s control panel Air knife for blowing small debris off the knife Air table Photocells Chrome table surface Folszz Hhhehcdw Iepl Ball screw drive for the rear comb Servo-driven saddle control for very fast operation Optical cutting line Enlarged side tables Additional rear table guards Weight: 4500 kg 380V power supply Includes documentation, a tool kit, a safety knife change tool, a tapping block, a spare knife, and one machine knife.

Condition: excellent (used), Year of construction: 1975, Breaking device . bar material dia. 10 - 45 mm Fjlsit Ev Tohcdw Ispl bar material stranggepreßte NE-Stangen weight of the machine ca. 3 t Bending and breaking device simple and sturdy device to detect internal flaws in extruded non-ferrous metal rods +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2017, operating hours: 1,113 h, machine/vehicle number: G30XL320839, TECHNICAL DETAILS Zünd G3 XL-3200 Plotter Vacuum system: 1–9 kW Tool heads Universal tool head UM-ZS G3, working width: 60 mm Universal tool head UM-ZP G3, working width: 60 mm Operating hours: 1,113 h EQUIPMENT Zünd G3 XL-3200 Plotter, item no. 6343200 G3 vacuum system, CIC, item no. 6438104 ICC camera for S3/G3, item no. 6539101 UM-ZS G3 universal tool head, item no. 6531006 UM-ZP G3 universal tool head, item no. 6531007 Fpolezyktlohcdw Iel Universal cutting tool (UCT), item no. 6532001 EOT-250 oscillating tool, G3, item no. 6532018 V-CUT tool, G3, item no. 6532021 Creasing tool type 1 (CTT1), item no. 6532051 Creasing tool type 3 (CTT3), item no. 6532053 Zünd Cut Center software package, item no. 6731200 Zünd Cut Center camera option, item no. 6731250 Zünd Cut Center V-Cut option, item no. 6731240 PC and monitor for Zünd Shipping costs for the plotter

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 15,794 h, machine/vehicle number: A3231E0676, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 12001, laser hours: 5,111 h, laser power: 12,000 W, laser wavelength: 1,030 nm, sheet thickness steel (max.): 50 mm, sheet thickness stainless steel (max.): 50 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 16 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning speed: 280 m/min, workpiece weight (max.): 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 12 kW (2024) High-spec 2D fiber laser cutting machine, one owner from new, installed September 2024. 3000 x 1500 mm working area, Siemens Sinumerik 840D SL control. In daily production and under TRUMPF service contract from new. Key data Machine No.: A3231E0676 Year of manufacture: 09/2024 Laser source: TruDisk 12001 with smart beam control Laser power: 12,000 W Working area: 3000 x 1500 mm Max. sheet thickness (thick-sheet package fitted): mild steel 50 mm / stainless 50 mm / aluminium 40 mm / copper 16 mm / brass 12.7 mm Max. simultaneous speed: 280 m/min Machine weight (rating plate): 7,650 kg Supply: 400 V 3~ / 50 Hz, 74.0 kVA, 3 x 125 A Hours: 15,794 h operating / 5,111 h laser-on Gas mixing Onboard gas mixer fitted - hardware mixing system for two gases, with additional cutting gas connection and gas mix cutting data (N2/O2). No external mixer unit needed. Machine Box frame. Gantry drive with linear direct drives. Longitudinal conveyor belt. Transverse conveyor belt with tipping container (left). Process cooler for machine and laser (water/air). Work area illumination. Pilot laser. Spraying equipment. Automatic nozzle changer, cleaning and centring. Closed beam guidance via laser light cable (LLK). Machine status light. Integrated electrical cabinets. Transport and installation device supplied. Cutting unit Single cutting-head strategy. Protective glass with online condition checking. Dynamic Focus Control. Universal cutting unit with fully adaptive lens system. Control and software SINUMERIK control, 21.5" wide-screen multi-touch display. Integrated technology data. Production plan. Multi-sheet processing. Condition Guide. Cutting Guide. Quick post-production. Auto-shutdown. Programmable cutting gas / pressure selection. Microweld. Online Update Manager. Remote support interface. Functions and cutting packages AdjustLine, BrightLine fiber, ControlLine, DetectLine, Drop&Cut, FastLine, FlyLine, FocusLine, NitroLine, PierceLine, PlasmaLine, Smart nozzle automation, Smart Rerun. Integrated camera for process viewing. Fusion cut performance package, Highspeed cutting package, Highspeed Eco cutting package, cutting package for thick sheets, copper cutting package, brass cutting package. Pallet changer / automation Automatic pallet changer in longitudinal direction, max. workpiece weight 1,800 kg per pallet (2,200 kg across both). LiftMaster Compact interface prepared; loading automation not fitted. Safety and extraction CE marking, EC Machinery Directive. Light barriers. Enclosed protective housing with certified door viewing panels left and right. Electrical rolling roof. Multi-chamber compact dust extractor. Folozz Shyjhcdw Ispl Data transfer USB, RJ45 network interface, Central Link, remote support, TRUMPF monitoring software connection. Installation Installed on a mezzanine; steel structure not included. Condition and availability One owner from new, in daily subcontract production in Braintree, Essex. Under TRUMPF inclusive service contract from new - two services a year, parts included - and still covered. Full service history available. Can be viewed cutting under load on any working day by appointment; cut tests welcome. Offered ex works, decommissioned by TRUMPF-certified engineers and loaded onto your transport. Export packing available. Enquiries Order confirmation, service history, hours report, cut samples and video on request.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: C12302A210I-D, total length: 4,550 mm, total height: 2,500 mm, power of the servo motor: 35,000 W, overall weight: 6,000 kg, product height (max.): 2,500 mm, input voltage: 380 V, For sale: industrial automatic paper cutting machine YYS-I-1750, year 2023. Excellent condition, high-performance (51 kW), suitable for high-productivity paper roll processing. Includes an additional brand-new spare blade. The machine is located in Slovenia (Celje region). The buyer is responsible for dismantling and transport. Other cardboard manufacturing equipment are also available printing machine (Flexo Printer EMproject 89), fully automatic folder gluer machine for corrugated boxes by HEBEI SOOME built in 2019, fully automatic folder gluer with bottom-locking capability by HEBEI SOOME ( 2024) and semi-automatic folder gluer machine for corrugated boxes, manufactured by HEBEI SOOME (2021) are also available for sale. Fpjlozik Dpehcdw Iel

Condition: repair required (used), functionality: not functional, Year of construction: 2000, operating hours: 50,000 h, machine/vehicle number: L00620269, Replaced LASMAC LC-1212 x III laser machine, not working could be renovated or would be suitable for spare parts and dismantling for scrap. Fslhcdsw Dqt New Ispl

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 13,979 h, machine/vehicle number: A3231E0532, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 24001, laser hours: 4,541 h, laser power: 24,000 W, laser wavelength: 1,030 nm, sheet thickness steel (max.): 60 mm, sheet thickness stainless steel (max.): 60 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 16 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, workpiece weight (max.): 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 24 kW (2023) High-spec 2D fiber laser cutting machine, one owner from new. 3000 x 1500 mm working area. Siemens Sinumerik 840D SL control with 21.5" multi-touch display. In daily production and under TRUMPF maintenance contract from new. Key data Machine No.: A3231E0532 Year of manufacture: 09/2023 Laser source: TruDisk 24001 (external, separate energy supply) Laser power: 24,000 W Working area: 3000 x 1500 mm Max. sheet thickness (thick-sheet package fitted): mild steel 60 mm / stainless 60 mm / aluminium 40 mm / copper 16 mm / brass 12.7 mm Max. simultaneous speed: 280 m/min Machine weight: 7,650 kg Supply: 400 V 3~ / 50 Hz, 22.0 kVA, 3 x 63 A Hours: 13,979 h operating / 4,541 h laser-on Machine Box frame. Gantry drive with linear direct drives. Longitudinal conveyor belt. Transverse conveyor belt with tipping container (right). Process cooler for machine and laser (water/air). Work area illumination. Pilot laser. Spraying equipment. Automatic nozzle cleaning. Closed beam guidance via laser light cable (LLK). Machine status light. Integrated electrical cabinets. Mild steel slats, 67 mm spacing. Slag cart under pallet changer. Cleaning brush. Cutting unit Single cutting-head strategy. Protective glass with online condition checking. Dynamic Focus Control. Automatic nozzle centring. Universal cutting unit with fully adaptive lens system. Control and software SINUMERIK 840D SL. Integrated technology data. Production plan. Multi-sheet processing. Condition Guide. Cutting Guide. Quick post-production. Auto-shutdown. Programmable cutting gas / pressure selection. Microweld. Nanojoints. Oseon Go. Online Update Manager. Remote support interface. Functions and cutting packages AdjustLine, BrightLine fiber, ControlLine, DetectLine, Drop&Cut, FastLine, FlyLine, FocusLine, NitroLine, PierceLine, PlasmaLine, Smart nozzle automation. Integrated camera for process viewing. Fusion cut performance package, Highspeed cutting package, Highspeed Eco cutting package, cutting package for thick sheets, copper cutting package, brass cutting package, gas mix cutting package (N2/O2). Gas Witt gas mixer unit with hardware gas mixer for two gases, plus additional cutting gas connection. Pallet changer / automation Automatic heavy-duty pallet changer in longitudinal direction. LiftMaster Compact interface prepared; loading automation not fitted. Safety and extraction CE marking, EC Machinery Directive. Light barriers. Enclosed protective housing with certified door viewing panels left and right. Electrical rolling roof. Multi-chamber compact dust extractor. Data transfer USB interface. RJ45 network interface. Central Link. Remote support. Installation Currently installed on a mezzanine. Mezzanine steel structure not included in the sale. Fpslhozz Sd Uscdw Isl Condition and availability One owner from new, used in daily sheet metal subcontract production in Braintree, Essex. Under TRUMPF maintenance contract from new (two services per year) and still covered - full service history available. Can be viewed cutting under load on any working day by appointment; cut tests welcome. Offered ex works, decommissioned by TRUMPF-certified engineers and loaded onto your transport. Export packing available on request. Enquiries Full TRUMPF order confirmation, service history, hours report, cut samples and video of the machine running available on request.

Condition: used, functionality: fully functional, Workpiece diameter: 1 – 18 mm Cutting discs up to: 100 x 1 mm Fpolozmp I Ujhcdw Iel Bore: 20 mm

Condition: used, SECOND-HAND DOUBLE SIDED CUTTING OFF MACHINE FOR CHAIR ELEMENTS MOD. TECNOSYSTEM Fpslhcewr T I Sodw Iol

Condition: used, Year of construction: 2010, machine/vehicle number: VG6000 3224, Equipment: documentation/manual, Koike Versagraph 6000, including cutting tables. Excluding strips. The machine was fully functional until April 2022. Folhcdwezdz U Uj Iepl It has been disassembled and stored since 2022. Original new price: 450,000 euros.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: TZ-JRT-30B-2800, Automatic log-cutting machine for toilet paper and hand towel cutting Fully automatic operation with advanced PLC control, LCD touchscreen, and servo motor. The machine is designed to minimize manual intervention, reduce labour requirements, and improve operator safety. The main operating parameters are set directly via the touchscreen PLC. The machine can be integrated with a converting and rewinding line for more efficient production. Designed for long-term industrial operation. Major components are imported, with the remaining components sourced from quality Chinese manufacturers. Technical Specifications Cutting diameter: 130–250 mm, adjustable via PLC Cutting length:50–380 mm, adjustable via PLC Maximum log length: 2,750 mm, adjustable via PLC Log lengths: Adjustable via PLC Cutting speed: Manually adjusted according to log diameter, thickness and cutting length Maximum stable operation speed: Up to 20 cuts/min for logs below 210 mm diameter and cutting lengths of 50–220 mm For cutting lengths above 220 mm: Automatic speed adjustment to approximately 10 cuts/min Automatic blade sharpening Automatic log loading/pick-up table Log storage rack with automatic feeding Automatic waste/reject removal via mechanical pusher (if using the push hand) Electrical connection: 3 × 400 V, 40 A Compressed air: 0.6 MPa Machine dimensions: 3,500 × 2,500 × 2,000 mm Weight: Approximately 3,000 kg (2 parts, cutter and the mechanical pusher) Fjlhcezxnmysdw Ijpl Country of manufacture: China Machine Condition The machine has been in operation at the factory and has been running without any major issues. Installation year 2020, running conditions about 7hrs /one shift. The following maintenance/repairs have been carried out: * Upper drive bearings replaced (2025) * Lower drive bearings replaced (2026) * Drive belts replaced (2026) * Damaged motion-control wiring repaired/replaced (2026) * Every 3-month inspection * Every 6-month lubrication of moving parts The machine is currently dismantled and stored in a dry warehouse. It can be inspected in its dismantled condition. Spare Parts Included Band saw blades: 4,400 × 70 × 0.65 mm price €105/pc, 9 unused blades, 1 sharpened and ready-to-work condition blade, 1 sharpened and ready-to-work blade (width narrow, still can cut most of the articles) Diamond grinding wheels: €80/pc, 1 spare New dust collector/vacuum system: €1,100 - purchased new but never installed (2-way suction and 1-way blown-in, with collection bin, direct attachment to the cutter) Other Information * Made in China - technical support within 24 hrs, spare parts in about 2 weeks. * Automatic operation * PLC + LCD touchscreen control (screen has original protection film still attached) * Servo-driven system * Suitable for toilet paper and hand towel logs * Suitable for integration into a converting/rewinding production line * Machine dismantled for storage Export outside the Baltic States Inspection possible by prior arrangement. Videos: youtu.be/8-xRCmvARYM youtube.com/shorts/vU4EunMEQt4 youtube.com/shorts/wwuV2Gp30AY youtube.com/shorts/WZjjokJjgZY

Condition: excellent (used), Year of construction: 2015, Workpiece diameter: 1.0 – 25 mm Workpiece length with stop: up to 500 mm Smallest workpiece length: from 5 mm Longer lengths also possible without stop Cutting spindle approx. 5400/11120 rpm Grinding spindle 2160/4,450 rpm Cutting disc diameter 125 x 1.5 x 20 mm Grinding disc diameter 100 x 50 x 20 mm Dimensions and weight: Dimensions 800 x 450 mm x 1,100 mm Weight approx. 200 kg The precision length cutting machine was inspected and cleaned by me, defective components was renewed. Fpslhcdozrp Tbew Ijl The machine combines cutting and grinding in a single operation and is ideal for high-precision machining of small to medium-sized workpieces such as ejector pins, sleeves or punches. Ideally suited for: Tool and mould making Punching and forming technology Production of carbide and HSS tools Precision mechanics and manufacturing technology Combined cutting and grinding in one machine High precision with short cycle times Suitable for steel, HSS and carbide

Condition: ready for operation (used), Cutting disc diameter: 254 mm Cutting capacity: 65 mm diameter Cutting table: 345 x 155 mm Table travel: 160 mm Drive motor: 2800 rpm, 2.2 kW Fpjljzi Suijhcdw Ijl Power connection: 3 phases, 400 V Footprint: 790 x 700 x 460 mm Weight (approx.): 80 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, laser source model: HF, laser power: 80 W, table length: 1,000 mm, table width: 600 mm, workpiece height (max.): 230 mm, resolution (max.): 1,000 dpi, No minimum price – guaranteed sale to the highest bidder! Suitable for professional engraving and cutting of various materials such as wood, acrylic, glass, plastic, and metal! TECHNICAL DETAILS Laser power: 80 W Laser source: Synrad HF-CO₂ laser source Table size/working area: 1,000 x 600 mm Fpolhcdezx Dz Hew Isl Maximum workpiece height: 230 mm Maximum resolution: 1,000 dpi Maximum cutting speed: 3,200 mm/s MACHINE DETAILS Power supply: 230 V Dimensions & Weight Machine dimensions (L x W x H): 1,480 x 900 x 1,120 mm Machine weight: 300 kg EQUIPMENT Microsonic autofocus sensor for automatic distance detection and precise focusing LED interior lighting Rotary engraving device for cylindrical workpieces External extraction system Durable Synrad CO₂ laser source

Condition: used, Year of construction: 1995, SECOND-HAND END-CUT OFF BORING AND MILLING MACHINE BACCI MOD. TTF1 - CE RULES - Volt. 380/50 - S/N 333 Fslhcjmxfhmsdw Iepl - Year 1995

Condition: good (used), Baumann Perfecta 115 Paper Cutting Machine The machine is in perfect condition and ready for production. Year of manufacture: 2021. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Baumann Perfecta premium cutting machines are manufactured in Balingen, Germany. Distinguishing Features of the Baumann Perfecta Machine: – Interactive User Interface – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System – Positioning via Electronic Handwheel – Optimized Cutting Cycle – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Fjlhcozz Hhnsdw Ijpl Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: used, Year of construction: 2015, Swift Cut 3000 W/T Plasma Cutting Machine, 3000mm x 1500mm Cuttting Bed, Hypertherm Powermax 125 Power Source. S/No. 4500318 (2015). Country of Origin: United Kingdom Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Location: These lots are located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Fpelhcdjzn Uuisw Iol

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 018.0402, gear diameter: 300 mm, controller model: Optronic CNC D140, workpiece width (max.): 2,300 mm, workpiece height (max.): 500 mm, center height: 250 mm, No minimum price – guaranteed sale to the highest bidder! Fpjlozzba Sjhcdw Ijl TECHNICAL DETAILS Gear diameter: 300 mm Module range: 0.5–8 mm Pressure angle: 35° Max. workpiece width: 2,300 mm Max. workpiece height: 500 mm Max. workpiece weight: 100 kg Center height: 250 mm Table length: 2,300 mm Grinding spindle travel: 200 mm MACHINE DETAILS Control system: Optronic CNC D140 Dimensions & Weight Dimensions (L x W x H): 5,900 x 1,300 x 2,000 mm Net weight: 7,500 kg Shipping packages: 5 units

Condition: good (used), Year of construction: 2017, functionality: fully functional, • Baykal BPL-H 4012 • Supplied new in 2017 • Hypertherm XPR300 AutoGas • EDGE Connect CNC • Twin plasma heads • Arc hours: 2,016 and 3,120 Fpelhcdezp D S Tsw Iol • 4 m x 12 m bed

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Fpjlhezg D I Aecdw Iel NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Condition: like new (used), functionality: fully functional, Year of construction: 2012, laser source manufacturer: Rofin, laser power: 200 W, overall weight: 1,000 kg, total length: 2,300 mm, total width: 770 mm, total height: 1,800 mm, Equipment: CE marking, documentation/manual, StarCut Tube Precision CNC cutting for tubes and flat parts Precision cutting for tubes and flat materials From catheter shafts to stents, hypotubes, and more A highly stable cutting platform – the SL uses a mineral cast base – delivers contour cutting accuracy better than ±5 µm. The machine was manufactured in 2012 but never used in production. It was only checked to ensure that everything was functioning correctly. Weight (kg) 1000 Length (m) 2.3 Height (m) 1.8 Depth (m) 0.77 Other dimensions Pallet not included in the dimensions We can assist with delivery to any location. Fpjlhszt A H Rocdw Isl The machine is in very good technical condition. The machine can be inspected and tested in Poland at the following address: 33-350 Piwniczna Zdrój, Poland.

Condition: reconditioned (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 25/699, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, Equipment: emergency stop, A virtually as-new, original Meyer Burger TS23 cut-off machine with the special hydraulic "Zürbeli table" and the large 27-1/6" clamping system is being offered. Additionally, our current DS1 displacement measuring device with HMI is installed. Fslhcexy Ra Sedw Iepl The machine is in truly impeccable condition, fresh from the workshop, having received a complete inspection, maintenance, testing, and service. The machine is complete, with original documentation available. The photos are taken by us and are up to date. For further information or to arrange details, please contact us. The machine is available directly from our stock. Prior sale reserved at all times. TIP: We continuously stock further Meyer Burger machines and spare parts – please also visit our website! Feel free to contact us, we will be happy to advise you!