Used Butt Weld for sale (5,663)

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch Dsdpfx Aoxrb Tgsg Teup - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: used, functionality: fully functional, input voltage: 380 V, electrical fuse: 16 A, nominal power at 50% duty cycle: 4 kVA, continuous power (apparent): 6 kVA, We offer this used IDEAL BAS 20 butt / flash welding machine, year of construction unknown, for sale. Type: BAS 20 Serial number: 18292 Nominal power at 50% ED: 4 kVA Connection power: 6 kVA Idle voltage: 2.8-4 V Maximum upsetting force: 0.25 Mp Welding thickness (steel): 3-50 mm Primary voltage: 380 V Frequency: 50-60 Hz Fuse rating: 16 A Number of steps: 5 Available April 2026 If you have any questions or need more information, feel free to send us a message or give us a call. Dodpjx Saxdofx Ag Toup

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Dedpoyqr Sxofx Ag Toup

Year of construction: 2011, condition: ready for operation (used), Eine Strecker Widerstandsstumpfschweißmaschine mit integrierter hydraulischer Presseinheit ist verfügbar. Nennleistung bei 50%: 120kVA, Nennstrom: 300A, Betriebsdruck: 350bar, max. Spannkraft: 69kN, max: 44kN, Hydraulikaggregat: K-VDS-700, Schneidleistung: 32mm, Kolbenpresskraft: 44t, schwenkbar: möglich. Maschinenabmessungen X/Y/Z: ca. 1800mm/1100mm/1600mm, Gewicht: ca. 2300kg, Steuerung: VIPA S7. Dokumentation vorhanden. Besichtigung vor Ort ist möglich. Djdpjwfg Edefx Ag Toup

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, working range: 40 mm, Flash butt welding machine IDEAL BAS 040 – very good working condition For sale is a butt welding machine IDEAL, model BAS 040, suitable for carpentry shops, sawmills, woodworking plants, or for the custom production of bandsaw blades. Dodpfx Ajynttxeg Tsup Technical data: Welding of wood bandsaw blades: 6 mm – 40 mm Welding of metal bandsaw blades: 13 mm – 27 mm Year of manufacture: 2008 Rugged and reliable construction, typical for the IDEAL brand Consistently perfect weld seams Very good working condition The machine is fully functional, has been regularly maintained, and is ready for immediate use. No additional investment required. For further information, photos, or to arrange a demonstration, please contact me.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: T02172, Manufacturer: THERMATOOL Model: HF WELDER CFI 350 kW VF Year: 2014 Condition: Used Stock Number: T02172 Output power: 350 kW Welding frequency: 150 - 250 KHz Input Voltage: 400 VAC / 50 Hz Dsdpfx Agjyid T Ns Toup Total installed power: 525 kVA

Condition: used, Year of construction: 1988, functionality: fully functional, Ideal BAS 120. Flash Butt welding Machine for Band Saw Blades. Year of manufacture: 1988. Hydraulic clamping. Dsdpfxsu Shgbs Ag Toup Annealing pyrometer. Blade positioning device. Blade width up to 120 mm. Painted used machine in working condition. Delivery from stock. Voltage: 440 V (USA grid). Transformer for 400V attached (EU grid).

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 238910, type of input current: three-phase, input voltage: 400 V, Flash butt welding machine iDEAL type BAS 050-11. It is an optimal, long-term solution for your production, which has been successfully implemented Dodex Uw Saepfx Ag Toup several times by customers in Europe and worldwide. INCLUDED: - Flash butt welding machine iDEAL type BAS 050-11 - iDEAL Shear AHE 080 - iDEAL grinding machine SMH 060 - box with grinding wheels in attached picture

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, The innovative flash butt welding machine for bandsaw and bimetal blades is developed entirely by our engineering department. It guarantees perfect welds and precise repeatability of the process. User friendly touch screen display from Schneider Electric that allows you to operate the machine effortlessly. The welding process is fully automatic, with the capability to adjust the electric current in 6 stages. The machine also allows for stepless regulation of electric current during annealing and pyrometric control throughout the welding process. The FBM10 is extremely easy to set up and cost-effective to maintain. Power supply voltage 400V Rated transformer capacity at 50% duty cycle 5kVA Frequency of electrical current 50HZ Clamping of the band saw blade Manual or Hydraulic clamping /Optional FBM 10.02/ Annealing Manual or Automatic, with pyrometric control /Optional/ Menu language Bg / En / Possibility for welding: - band saw blades for wood mm 6÷60 - Bi-metal band saw blades mm 6÷54 - stainless steel band saw blades mm 6÷40 - band saw blades without teeth mm 6÷50 Weight: 197kg Dedexhf Dzjpfx Ag Tjup Dimensions: (length х width х height) mm 910 х 640 х 530

Condition: new, Year of construction: 2025, Butt Welding Machine Technical Specifications: Model: KAB10 CE certified Operated: Foot Power at 50% ED 10kVA, Continuous power 7.1kVA Welding Capacity: Up to 8mm + 8mm mild steel wire Primary winding: Copper wire Secondary winding: Copper bar Core: Silicon steel EI core Mains Connection: 400V/50Hz Power Input Cable: 3m Protection Class: IP21 Dujdpfjtwfv Dex Ag Top Space Requirement (W/L/H): 625mm x 600mm x 1035mm Weight: 90Kg Warranty: 1 years (+10 years spare parts support)

Condition: new, Year of construction: 2025, Butt Welding Machine Type KMB5 CE certified Operated: Hand Power at 50% ED 5kVA, Continuous power 3.5kVA Welding Capacity: Up to 5mm + 5mm steel wire Primary winding: Copper wire Secondary winding: Copper bar Core: Silicon steel EI core Duodpfjq Rga Sox Ag Top Mains Connection: 220V/50Hz Power Input Cable: 3m Protection Class: IP21 Space Requirement (W/L/H): 300mm x 370mm x 275mm Weight: 38Kg Warranty: 1 years (+10 years spare parts support)

Condition: excellent (used), Year of construction: 2018, Mobile loading ramps, Butt, BKV 614 6 t – used – : Dodpfxoxvh Hho Ag Teup Ex-site price: €12,500 (net) Manufacturer: Butt Model: BKV 614 Year of manufacture: 2018 Load capacity: 6,000 kg Driveway with grating With safety railings Condition: very good Available: from approx. January 2026, possibly earlier Location: Euskirchen

Condition: excellent (used), Year of construction: 2023, 2 x mobile loading ramps, Butt, BKV 1013, 10 t, front axle ramp for straight-line loading – used - : Price ex location: €14,950 (net), including loading! Manufacturer: Butt Model: BKV 1013 Year of manufacture: 2023 Load capacity: 10,000 kg Driveway with grating Total length: approx. 12,500 mm Total width: approx. 2,300 mm Track width: approx. 1,960 mm Lip width: 2,000 mm Lip length: 600 mm Length of the straight upper section: 3,200 mm Ramp height at crossover, height adjustable: 1,200–1,650 mm With guardrail Condition: very good Available: immediately Dujdpfx Ageyhxkte Tsp Location: 58710 Menden

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Dedpspy Uzyofx Ag Tsup Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Year of construction: 1989, condition: good (used), mobile loading ramp, loading ramps, loading ramp, transportable loading ramp -Load capacity: 9,000 kg -Drive-on width: 1940 mm -Overload flap: 1940 x 800 mm -Heavy-duty wheels: with solid rubber -Height: adjustable 1070 - 1750 mm Dedpfx Agjxw Huto Tjup -Dimensions: 11850/2380/H1220 mm -Own weight: 4000 kg

Condition: used, Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod Duodpfx Aochp Awjg Tjp -Net weight: 7 kg -Number: 2x packages available -Price: per package -Weight: 7.6kg/package

Condition: used, Year of construction: 2018, Butt plate for loading bridge Bj 2018 Width 2.25 cm Dusdpfxsxbtbne Ag Tsp Length 7.50cm Hydraulically adjustable on battery and equipped with spoon fork Immediately available If you are interested in our loading bridge, we can arrange transport for you.

Year of construction: 2023, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H34008-HW, Welding System for Frame Welding of Tinplate Cans with Comprehensive Peripheral Equipment! The new price of the machine was CHF 800,000! The system comprises the following components: - Can Man X7-300 WeldCenter (Serial no.: H34008-HW) - Sheet Transfer and Storage System PowerFEED (Serial no.: H31723) & PowerSTORE (Serial no.: H31503) - Induction Oven PowerCURE (Serial no.: H33620-HS) - Goudsmit Magnetics Palletising Magnet TPLC12804 - BASCO Leak Tester PRE 1024 GLX - Hyfra SIGMA 28-S Chiller Further configuration details can be found in the attached document. Can Man X7-300 WeldCenter Dsdoymxlqjpfx Ag Tsup TECHNICAL DETAILS (according to manufacturer) - Production output: 100 – 600 pcs/min - Strip speed: 10 – 100 m/min - Sheet thickness: 0.10 mm – 0.28 mm Can body dimensions: - Min. can body dimensions: Ø 52 x 50 (height) mm - Max. can body dimensions: Ø 153 x 320 (height) mm Goudsmit Magnetics Palletising Magnet TPLC12804 TECHNICAL DETAILS - Product diameter: 65 mm – 230 mm - Product weight: max. 5 kg - Pallet size: 1,200 x 800 mm MACHINE DETAILS - Magnet dimensions: 1,226 x 826 mm Pneumatics: - Working pressure: 6 – 8 bar - Air consumption: 8 L/stroke Ambient temperature: -20°C to 40°C Robot interface: Available Vacuum system: Integrated EQUIPMENT - Interface for robotic arm - Integrated vacuum system for handling sheets between can layers - Perforation pattern for robotic arm - Magnet plate (2x) - Vacuum connection (1x) - Pneumatic tubing (3x) - Sensor connection box Hyfra SIGMA 28-S Chiller MACHINE DETAILS Dimensions & Weight: - Dimensions (L x W x H): 715 x 715 x 1,554 mm - Weight: 210 kg EQUIPMENT - Tank volume: 120L - Scroll compressor - Stainless steel frame construction - Automatic water make-up - Bypass valve - Water level indicator - Pressure gauge in water supply - Dry-running protection pump - Ball valve for tank drainage - Fault indication with digital display - High-efficiency condenser - Metal filter cells

Condition: not inspected (used), Year of construction: 1991, functionality: unexamined, machine/vehicle number: 14098/91, short-circuit current: 1,200 A, overall weight: 3,000 kg, total width: 2,400 mm, total height: 2,700 mm, total length: 2,500 mm, No reserve price – guaranteed sale to the highest bidder! Bidding requires timely collection between 08/04/26 and 16/04/26! MACHINE DETAILS Electrical Data Electrode force: 26,550 N Operating voltage: 380 V Connected load: 474 kVA Djdsyk Up Tspfx Ag Tjup Rated power: 3 x 50 kVA Rated current: 228 A Secondary voltage: 3.5 - 6.3 V Rated secondary current: 17,400 A Short-circuit current: 1,200 A Secondary short-circuit current: 92,000 A Mains frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,400 x 2,700 mm Weight: 3,000 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Kemper Fume filter table type fume extraction unit Duodpfeyrfhvsx Ag Top

Condition: ready for operation (used), self aligning set of welding rotators one driven unit one non-driven unit max load capacity: 300 ton max rolling capacity: 450 ton Dodpfsx Enhyox Ag Tjup speed range: 60 1200 mm/min min diameter of workpiece: 1000 mm max diameter of workpiece: 7800 mm spare wheels included Max weight on both supports: 450 ton Number of wheels: 24 wheels Dia x width wheels: dia 580 x 140 mm Coating material on wheels: steel

Condition: ready for operation (used), empty load weight: 160,000 kg, total length: 12,000 mm, total width: 7,000 mm, total height: 10,000 mm, laadvermogen: 300 ton tafeldiameter: 9500 mm Duodpfxexpkh Ij Ag Top variabel draaien en variabel kantelen 180°

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, machine/vehicle number: 897, total height: 700 mm, total width: 400 mm, total length: 900 mm, overall weight: 150 kg, No minimum price – guaranteed sale to the highest bidder! Djdpfxjyr H H Ts Ag Tsup Placing a bid obligates the buyer to collect the item on time between 04.05.26 and 07.05.26. MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 900 x 400 x 700 mm Weight: 150 kg Note: The gas cylinder shown in the photos is not included in the scope of delivery. For welding technical data, see the nameplate photo. External reference: 39

Condition: used, Year of construction: 2026, The price does not include accessories. - Year: 2026 - Documentation available: No - CE certificate present: No - Model: Hardened metal - Table length [mm]: 3000 - Table width [mm]: 1500 Dsdpfjynz Dfsx Ag Toup - Table top thickness [mm]: 15 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2026, The price does not include accessories. - Year: 2026 - Documentation available: No - CE certificate present: No - Model: Hardened metal - Table length [mm]: 2400 - Table width [mm]: 1200 - Table top thickness [mm]: 15 Financial information VAT: The price shown is exclusive of VAT Dujdpfx Aoynzy Hsg Top VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum