Used Weld Line for sale (15,014)

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes Gkodpfxez En Axs Al Ssc End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. Gksdpfx Alez Rnu Tj Ssc _____ Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: excellent (used), Year of construction: 2016, operating hours: 9,001,700 h, functionality: fully functional, machine/vehicle number: N/A, PACE MEAT BONING LINE FOR BUTCHERY OPERATION. DOUBLE SIDED PACE BUTCHERY CONVEYOR LINE EXTENDING TO A TRIMMING AND PACKING LINE APPROX LENGTH 28m. SPACE FOR 16 BUTCHERS 8 PER SIDE WITH CENTRAL BONE REMOVAL CONVEYOR . SPACE FOR BANDSAW AND DERINDER MACHINES WITHIN THE PROCESS. VARIABLE SPEED CONVEYOR TO DICTATE PACE SPEED OF LINE . Gkjdpjy Uk A Sofx Al Sjc

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Profile height range for welding: 30-185 mm Godex E Rd Djpfx Al Sjkc Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Condition: used, Stainless steel welding line MOD.70/120, made OLIMPIA 80 Gsdpovtn H Tsfx Al Sokc with tricathode welder & Seam bead roller & Orbital polishing Specifications: - Diameter : 35 – 120 mm - Thickness : 0.7 – 3.5 mm - Length : 3 – 6 m Tube diameter: 35 – 120 mm Thickness: 0,7 – 3,5 mm Tube length: 3 – 6 m

Condition: used, Year of construction: 2010, functionality: fully functional, Complete KMW welding + deburring line with a turning table. 1 KMW brand 4-head welder for PVC window profiles, with an additional output conveyor. 1 Automatic deburring machine with a transfer table and automatic turning function, KMW brand. Programming is done directly on the machine via software that allows for visualization of the profiles and the overlapping of machining operations. In good working condition. Manufacturer's documentation is provided, including electrical diagrams, pneumatic diagrams, and the user manual. Gsdpfx Alsy U T Iqj Sokc

Condition: excellent (used), Year of construction: 2013, operating hours: 150,494 h, functionality: fully functional, GRAF welding and cleaning line, year 2013. Working direction from left to right. SL4U four-head welding machine, max. dimensions 2800 x 3200 mm, min.400 mm, flash 0.2 mm. WP CNC 2 TR cleaning machine. Cooling station. Knives for cleaning flat, grooved and smooth surfaces. It has only performed 150,494 cycles - very good technical condition. Gkodpfx Aeyyxvwol Ssc

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working range: 1,000 mm, For sale is a completely refurbished Schlatter radiator welding line consisting of: - Back-up ring unit (EBV) - 2-row multi-spot welding machine (hydraulic) - 2-row convector welding machine (pneumatic) - Longitudinal seam welding machine (NFR) - Cross-seam welding machine (NQD) - Cutting shear (TS10) - Corner cutting machine (ESV) - Transverse edge closing device (QRSV) - Transport & turning device (TVW) Gkjdpfx Aov Edlvsl Ssc - Nipple & spacer welding system (NIAH) - Test basin (water) Control system: Siemens S7 TIA Please note that the radiator welding line is only available in a fully refurbished condition.

Condition: used, Automatic lattice girder welding line TE 30 S made by EUROLLS Model : TE 30 S Maximum stacking height : 500 mm Wire diameter - Upper current (ds -smooth or barbed) : From 4 to 12 mm - Lower current (di- smooth or barbed) : From 4 to 12 mm - Diagonal wire (dg- smooth or barbed) : From 3 to 8 mm Diagonal pitch (P) : 200 mm Beam pitch : 400 mm Maximum speed with hot and cold drawn wire : Max 30 m/min Maximum spool weight in feed : 3000 kg Machine type: TE 30 S Maximum stacking height: 500 mm Wire diameter Upper current (ds -smooth or barbed): From 4 to 12 mm Gkodjvtqacopfx Al Sjc Wire diameter Lower current (di- smooth or barbed): From 4 to 12 mm Wire diameter Diagonal wire (dg- smooth or barbed): From 3 to 8 mm Diagonal pitch (P): 200 mm Beam pitch: 400 mm Maximum speed with hot and cold drawn wire: Max 30 m/min Maximum spool weight in feed: 3000 kg

Condition: used, Stainless steel welding line MOD.50/60, made OLIMPIA 80 with TIG welder & Seam bead roller & Orbital polishing Gedpfx Asymautjl Sekc Specifications: - Diameter : 18 – 63.5 mm - Thickness : 0.5 – 3 mm - Length : 3 – 6 m - Speed : Up to 3 m/min Diameter: 18 – 63.5 mm Length: 3 – 6 m Speed: Up to 3 m/min

Condition: used, Year of construction: 2007, machine/vehicle number: 506 8026 / 479 6312 / 7028, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 2,500 mm, workpiece height (max.): 160 mm, number of axes: 4, actuation type: electric, overall weight: 3,000 kg, Equipment: documentation/manual, For sale: a complete, functional, and production-used welding and cleaning line from Rotox, manufactured in 10/2007. The line was used at EUROCOLOR for the production of PVC windows and doors (Schüco and Rehau profiles). Working direction: right to left (the right beam, from the welding machine's side, is a fixed beam). The line includes: ● Rotox SMK 506 4K four-head welding machine ● Rotox EPA 479 automatic corner cleaning machine (four-axis, CNC) with WT 427 rotating station ● FIMTEC cooling station Photos and documents are available at this link: 1. Rotox SMK 506 4K four-head welding machine ● Year of manufacture: 10/2007, machine number: 506 8026 ● Fixed side of the machine: right (working direction from right to left) ● Profile arrangement on the table: outer side of the window facing down ● Weld bead allowance: 6 mm ● Flash control: 0.2–2.0 mm, automatically adjustable knives from above and below (used at approximately 0.2 mm) ● Maximum welding dimension: 2500 x 2500 mm (in practice, frames were welded up to approximately 2650 x 2650 mm) ● Minimum welding dimension: 320 x 420 mm, with automatic transport ● Frame welding: min. 350 x 500 mm – max. 2500 x 2400 mm ● Welding of U and T profiles and door frames (C-type welding) ● Heated knives for controlling the weld bead ● Quick replacement of Teflon film ● Machine safety fencing ● Data acquisition system from the welding machine ● Operating counter: approximately 385,000 welding cycles ● Manufacturer's specifications: maximum connection power 10 kW, voltage 400 V, current 20 A, 50 Hz, air pressure 6–7 bar, air consumption approximately 150 NL/weld, profile height 45–160 mm, maximum profile width 140 mm, weight approximately 3000 kg. Material processed: PVC profiles 2. Rotox EPA 479 automatic corner cleaning machine + WT 427 rotating station ● Year of manufacture: 10/2007, cleaning machine number: 479 6312 ● WT 427 rotating station connected to EPA 479: machine number 7028, dimensions 5700 x 2500 mm, transport direction to the right ● Fixed side of the machine: right ● Profile arrangement on the table: outer side of the window facing down Gjdpfx Aozp Nz Tel Sokc ● Maximum dimensions of processed frames: 2500 x 2500 mm ● Unit for drilling holes for Siegenia and roto hinge hardware – unit with a six-spindle head, pneumatic drive ● Hole drilling for hinge: 4 x Ø3 mm, 2 x Ø6 mm (according to technical drawing) ● Equipment: 2x unit for cutting the visible surface, 2x second unit for cutting the visible surface, 2x CNC unit for cleaning under the seal (pneumatic drive), unit for cutting the inner surface vertically (sash bar), unit for cutting the angled surface up to 23° with an additional bevel/arc (chisel cleaning), unit for cutting the inner surface horizontally, tools for internal processing, 170 mm contouring blade (right), grooving knives S=3.0 mm/G=0.5 mm (2 pcs.), knives for flat trimming without a groove (2 pcs.), extension cable for the control panel ● Operating counter: approximately 9,863,552 cleaned corners ● Note: Precise minimum dimensions of profiles and welds that can be cleaned in manual/automatic mode – to be confirmed directly with Rotox Polska 3. FIMTEC cooling station ● Year of manufacture: approximately 2021–2022 ● Purchased from GRAF Machines are functional, disassembled – not currently in operation – prepared for transport. Contact: EUROCOLOR Sp. z o.o. ul. Toszecka 47, 44-120 Pyskowice Machines are functional and ready for inspection and demonstration before purchase. Disassembly

Condition: excellent (used), Year of construction: 2012, section dimension max. 150 x 50 mm pipe Ø 50 – 150 mm wall thickness 1,5 - 5,5 mm reference material (tensile strength) 600 N/mm² coil Ø max. 2.100 mm coil weight max. 10 t finish pipe length max. 9.000 mm round pipe Ø according to list rectangular pipe according to list speed 100 m/min working direction left → right The line consists of: 1. entry part: double carousel decoiler coil opener/pinch roll unit/leveller crop shear strip tail end welding machine strip guide strip twister/pinch roll unit/strip accumulator entry strip accumulator edge trimming Gkedpfx Aeuc Sw Ajl Sjc exit twister 2. forming part: No. of horizontal stands: 4 No. of vertical stands: 3 3. welding part (HF) 4. calibrating part 5. separation 6. edge bevelling 7. blowing out 8. bundling 9. hydraulics 10. electrics

Condition: good (used), CORIMPEX BEAM WELDING MACHINE TYPE BWM TC 2000-1000 3-15 machine. WEB : Height 200 -:- 2000mm (flanges included). Thickness 5 -:- 25mm FLANGE : Width 150 -1000mm Thickness 8-40mm Max. post-deforming thickness = 35 mm on 1000 mm flange width MAX. BEAM WEIGHT : 1000 Kg / metre MIN. BEAM LENGTH : 3000 mm MAX. BEAM LENGTH : 15.000 mm. HYDRAULIC CYLINDER : 1800 mm. TACK-WELDING : Not needed. POWERED ROLLS IN THE : speed = 12 m/min. ENTRY/EXIT CONVEYORS PISTON WORKING : 6/9 Tons. Gsdpfx Alszc Rl Us Sekc TRAVEL SPEED RANGE : 0,2 -:- 2,1 m/min WELDING PROCESS : submerged Arc Tandem.

Condition: used, Year of construction: 2010, "URBAN" welding and cleaning line, consisting of Urban welding machine type AKS 6610/4-30/45 with Urban corner cleat machine type SV 530/B and Urban transport unit type TBA 30/48-HQ. Gkjdpfsy Iy Rxsx Al Ssc

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Storti Nailing Line GSI/150-AL2 – pallet line Gkodpjzgayusfx Al Ssc The Storti GSI/150-AL2 pallet nailing line is designed for efficient pallet production. This robust industrial machine is suitable for automated pallet assembly, offering reliable performance and increased production capacity. Holtec Variocut VC-SHKA-HPI – cut-to-length saw / optimization line This industrial machine is designed for precise and efficient wood cutting. It is suitable for woodworking operations requiring reliable performance, high output, and accurate material cutting.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, year of last overhaul: 2024, Four Corner Head Welding and CNC Corner Cleaning Line STURTZ SE - HSM 30/26 Compact. The whole line works properly and well. The equipment was operational up to its uninstallation. Gkjdov Uzr Eopfx Al Sec

Year of construction: 2018, condition: excellent (used), The following systems can be processed: Profile Kömmerling, 76AD, 76MD, 76Unity, 88MD # High-temperature welding # Quick-change system for welding strips Quick-change system for shims Diagonal or parallel joining process Resilient intermediate plates for tolerance compensation Heated boundary plates Welding bead limitation on support and clamping plates 2 mm (optionally 0.2 mm possible) Heated welding bead limitation Individually programmable welding parameters Safety device according to CE Horizontal discharge device Control technology High-performance JetControl control ensures high user-friendliness Intuitively operable information management system with diagnosis and reporting tool Digital visualization of maintenance intervals Display of the profile strips to be inserted, indication for profile and shim changes Individually programmable welding parameters Operating system Windows High-quality PC with 19" TFT monitor USB ports DVD drive # Keyboard and mouse # Data management via database Technical data: Overall depth min.: 45 mm Overall depth max.: 120 mm Profile width min.: 25 mm Profile width max.: 130 mm Working area: 3,000 x 2,300 mm Element size min.: 320 x 320 mm Element size max.: 2,600 mm in the direction of travel Gksdpfx Alsz Ep Ezo Sjc Element size max.: 3,000 mm width Element weight max.: 80 kg Electrical connection: 230 / 400 volts, 3 phases, 50 Hz Compressed air connection: 7 bar # Air consumption: 50 l/min

Condition: new, PVC Line – YILMAZ TK 503 Single-Head Welding Machine + YILMAZ CA 601 Corner Cleaning Machine – Year 2023 The line consists of two professional machines designed for welding PVC profiles and subsequently cleaning the welded corners: YILMAZ TK 503 single-head welding machine YILMAZ CA 601 corner cleaning machine Together, these two machines make it possible to complete the PVC profile welding cycle and subsequently remove welding beads and processing residues from the welded corners. 1. YILMAZ TK 503 - Single-Head Welding Machine for PVC Single-head welding machine designed to join PVC profiles at continuously adjustable angles ranging from 30° to 180°. The machine allows the operator to select the welding bead thickness between the standard 2.0 mm configuration and the reduced 0.2 mm configuration. The melting and welding times, pressure and temperature can be adjusted according to the profile specifications. Main features Continuously adjustable welding angle from 30° to 180° Standard 2.0 mm or reduced 0.2 mm welding bead Maximum profile height: 165 mm Automatic start and completion of the welding cycle Adjustable temperature from 0 to 300°C Separate profile clamping by foot pedal Quick mould-change system Support arms for long profiles Quick replacement of the Teflon coating Mobile machine frame Included accessories Profile support arms on both sides Electric foot pedal Technical specifications Installed power: 1.5 kW Power supply: 230 V AC, single-phase Frequency: 50/60 Hz Air consumption: 20 l/min Operating pressure: 6–8 bar Dimensions: 600 × 1,915 × 1,400 mm Net weight: 113 kg Gross weight: 128 kg 2. YILMAZ CA 601 - Corner Cleaning Machine for PVC Corner cleaning machine designed for finishing PVC profiles welded at 90°. The machine cleans the upper and lower surfaces and the external corners, accurately removing welding beads and residues generated during the welding process. The hydropneumatic system, PLC control and vertical and horizontal clamps ensure stability and precision throughout the working cycle. Main features Cleaning of PVC profiles welded at 90° Cleaning of upper and lower surfaces and external corners PLC control system Hydropneumatic operation Gkodpfx Aloz D Dhzo Sec Maximum profile dimensions: 130 × 180 mm Minimum profile dimensions: 30 × 30 mm Pneumatic blade-change system Profile clamping by vertical and horizontal clamps Profile centring system Adjustable cleaning tools for laminated and non-laminated profiles Single or multiple cleaning cycles Automatic cycle start and stop Included accessories Compressed-air gun Support table Two milling cutters for cleaning white profiles Technical specifications Installed power: 1.2 kW Power supply: 400 V AC, three-phase Frequency: 50/60 Hz Maximum cutter diameter: 215 mm Bore diameter: 32 mm Air consumption: 36 l/min Operating pressure: 6–8 bar Dimensions: 1,375 × 2,405 × 1,255 mm Net weight: 176 kg Gross weight: 210 kg

Year of construction: 2011, condition: ready for operation (used), System includes (1) Industrial Robot KUKA KR 150-2 2000 (2) Spot Welding System SPATZ (3) Camera Inspection OMRON (4) Light Barrier SICK, operational hours counter: 2602h. Gksdpfx Alogqkpmo Soc

Condition: used, Used Pfaudler BE5000 vertical glass lined reactor. Approximately 5,000 litre capacity. Internal rated 6.6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 6.6 bar/full vacuum design pressure at -29 to 200 deg. Unit has welded dished top and bottom heads. Includes top entry 4-blade CBR Turbine type agitator driven by a 10.5 kw 415 volt 292-1460 rpm 3/50 motor. Unit is mounted on lugs. Specifications: Capacity: 5,000 L Internal Pressure: 6.6 bar Gksdpfx Aeykn Rdel Sec Internal Temperature: 200°C Jacket Pressure: 6.6 bar Jacket Temperature: 200°C Legs/Lugs: Lugs

Year of construction: 2019, condition: like new (used), functionality: fully functional, For sale: SCHTEC WM740 four-head automatic welding machine, rarely used and in like-new condition, including WM620 corner cleaning automaton, cooling station, and automatic turning arm. If purchased together with the SMC350 machining center and Pressta two-head automatic screwing unit, which are also listed in your advertisements, the package price is EUR 180,000. For further information, please feel free to contact me. Godpfx Asyzimcjl Sskc

Condition: excellent (used), ELUMATEC DG 342 FE / E 555-1 – AUTOMATIC DOUBLE-HEAD MITRE SAW Gedpfewrpwijx Al Sokc

Year of construction: 1978, condition: excellent (used), Technical details : -Manufacturer- DRAWEBA - Model - DDANS 17 l Gkodjlf Iqnspfx Al Sjc - Year - 1978 - Wire Diameter - 1,4 -1,6 mm - Mesh opening size - 10x10 mm min. - Mesh width - 1600 mm

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6415 1 x Comcount Packaging Systems bowl feeder and 1 x GIC Gainsborough VFFS bagger with 1 x outfeed conveyor. Model of Comcount bowl feeder - BFWT. Manufacturer - Comcount Ltd. Date of manufacture – 2019. Weighing range - 150g-500g. GIC Gainsborough Engineering model - VFB2000. Manufacturer - Gainsborough Engineering Ltd Date of manufacture – 2008. Sealing bars - 290mm horizontal & 320mm vertical. Reel width - 620mm. Current film - 280mm. Gkjdey Hlw Iepfx Al Sjc Forming tube - 80mm diameter. Outfeed conveyor - IC350. Belt width - 295mm. Outfeed height - 910mm high. Overall footprint - 4.3m long x 3.45m wide x 3.1m high. Condition – Very good. Only been used 5-6 times in 2.5 years.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Year: 2007 - technically efficient, ready to work – after full service - SV 530 cleaning machine - AKS 1610 welding machine - TBA-F 26/25 cooling station - WT 530 turning station - Welding dimensions: 2300 x 3500 mm Gksdoxgqvtspfx Al Soc - Flash limit: 0.2 – 2 mm - Seal formers