Used Capstan lathe for sale (4,775)

Listing

Request more images Request more images Already requested

6

București

(dealership location)

2,420 km

LATHE 630x4000

DEMOOR lathe

Price info Price info Already requested Call

Condition: used, 630x4000 Under power. C2m28f7g

Price info Price info Already requested more

Auction

5

Ends in

 d  Hrs  Min  Sec Auction ended

Vertical turning lathe

Gildemeister DMG CTV 250

€4,000

Condition: defective spare-parts repository (used), Year of construction: 2003, Functionality: not functional, TECHNICAL DETAILS Chuck diameter: 250 mm Face displacement stroke X: 800 mm Longitudinal stroke Z: 300 mm Rapid traverse speed X: 100 m/min Rapid traverse speed Z: 45 m/min Spindle head (flat flange): 170h5 mm Spindle diameter in front bearing: 120 mm Spindle bore: 79 mm Power of the three-phase mainlan drive: 22 kW Torque ED 100%: 210 Nm Speed range: 20 - 5000 rpm Speed range: 0-100 rpm Torque (holding torque brake): 240 Nm Accuracy of the point rest: < 0.02 degrees Number of tool stations: 12 Tool holder: according to DIN 69880 Pymmrt9t0 Cylindrical shank diameter: 40 mm Drive power (40% ED): 10.8 kW Torque: 28 Nm Speed: 6000 rpm Hydraulic capacity, complete: approx. 25 L Pressure: 80 bar Pressure for clamping device: 70 bar Cooling capacity: approx. 25 l Pump output: 1.7 kW Flow rate at 6 bar: 20 l/min Lubrication capacity: 1.8 l Rapid traverse speed Y: 10 m/min Feed force: 20000 N Hub: ±50 MACHINE DETAILS Net weight of the machine without chip conveyor: approx. 7500 kg Gross weight of the machine with truck transport: approx. 7800 kg Machine without chip conveyor L x W x H: approx. 2600 x 2200 x 2800 mm Total connected load: 50 kVA Voltage: 400 V Frequency: 50 Hz Fuse protection (slow-blow) according to VDE 0100: 80 A Permissible voltage fluctuation at 400 V: +/- 10% Machine acceptance: according to DIN 8605 Permissible ambient temperature: from +15 to +35°C Relative humidity: 75%. Installation altitude: 1000 m above sea level Fixed pick-up date of the machine on 27.12.23 or 09.12.23. Bidder is obliged to pick-up the machine on time.

more

Auction

7

Ends in

 d  Hrs  Min  Sec Auction ended

Vertical lathe

EMAG VSC 200

€5,000

Condition: good (used), Year of construction: 1997, Functionality: fully functional, Equipped with workpiece conveyor belt No minimum price - guaranteed knockdown to the highest bidder! Dmwcpt TECHNICAL DETAILS Turning diameter: 260 mm turning length: 200 mm Control: Siemens 840 C Spindle bore diameter: 50 mm Dimensions (L x W x H): 3,160 x 1,200 x 2,650 mm Machine weight: approx. 6,000 kg

more

Auction

16

Ends in

 d  Hrs  Min  Sec Auction ended

Two-spindle vertical lathe

EMAG VSC 200 DUO

€15,000

Condition: good (used), Year of construction: 1999, Functionality: fully functional, Right of first refusal for the highest bidder: in the event of a knockdown, a higher number of items can be arranged No minimum price - guaranteed knockdown to the highest bidder! Bhwq9gdmrw8 TECHNICAL DETAILS X-path: 725 mm Z-path: 200 mm Chuck diameter: 160/200 mm Rotation diameter: 725 mm Main spindle: 2 pieces Control: Siemens 840D Spindle flange (DIN 55026): 5 size Spindle bearing: 80 Ø - front Maximum speed: 6500 min-1 Spindle distance: 955 mm

more

Auction

14

Ends in

 d  Hrs  Min  Sec Auction ended

Vertical lathe

EMAG VSC 200

€9,000

Condition: good (used), Year of construction: 1999, Functionality: fully functional, Right of first refusal for the highest bidder: a higher number of units can be procured in the event of a knockdown No minimum price - guaranteed knockdown to the highest bidder! TECHNICAL DETAILS Turning diameter: 260 mm turning length: 200 mm Control: Siemens Spindle bore diameter: 50 mm Dimensions (L x W x H): 3,160 x 1,200 x 2,650 mm Machine weight: approx. 6,000 kg Bhwqxuwufmn

more

Auction

9

Ends in

 d  Hrs  Min  Sec Auction ended

11-axis sliding headstock automatic lathe

STAR Micronis ECAS 32 T

€25,000

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 0179 (033), Functionality: fully functional, 11-axis sliding headstock automatic lathe from STAR in very good condition and with bar loader and bar magazine -> ready for immediate use! The bar feeder fills the bars automatically to the bar magazine FMB turbo 3-36. Machine is delivered with tool holders and spare parts. TECHNICAL DETAILS Number of axes: 11 Axes: X 1-3, Y 1-3, Z 1-3, C1-2 Turning diameter over bed: 32 mm Spindle clearance: 32 mm Turning length: 125 mm Control: YASKAWA SIEMENS 840 DI V2 Spindle speed: 7000 rpm Workpiece length: max. 150 mm Clamping diameter: 32 mm Feed rate: 0 - 2000 mm/min Bar feeder: available Bar magazine: FMB turbo 3-36 MACHINE DETAILS Machine weight: approx. 5.7 t Space requirement: approx. 10.5 x 2 x 1.9 m Supply voltage: 200 V, 3 phases Yfshh3ps Frequency: 50 / 60 Hz Connected load: 8.0 kVA

more

Auction

3

Ends in

 d  Hrs  Min  Sec Auction ended

Lathe

Benzinger TNI B8

€15,000

Condition: repair required (used), Year of construction: 2000, Functionality: not functional, Error: Machine starts up, but the axis module of the Y-axis reports an error Special feature: the main spindle is a special spindle (71916 with short taper 5 holder and a special cylinder 4371 made by Röhm) Lvm7msblir TECHNICAL DETAILS Control: 2-channel Siemens 840 D, Turret 1: X1-, Z1- and Y1-axis Counter spindle: X2-, Z2- and Y1-axis Tool positions turret: 1x 12-fold pneumatic Tool positions counter spindle: 1x 12-fold pneumatic Holder: VDI25 with single-position drive Additional counter spindle tool positions: Spindle turret around the counter spindle with 7 VDI 16 positions Main spindle belt drive: Pneumatic hollow clamping cylinder D42 Counter spindle belt drive: pneumatic hollow clamping cylinder Unloading device: with unloading belt Coolant system: with heat exchanger Chip collection container: available

more

Auction

9

Ends in

 d  Hrs  Min  Sec Auction ended

Lathe with superfinishing device

DMG MORI CTX alpha 500

€28,000

Condition: excellent (used), Year of construction: 2017, Operating hours: 2,947 h, machine/vehicle number: 0040001262C, Functionality: fully functional, 2-axis universal lathe modified with SUPFINA mod. 202 superfinishing device without superfinishing belt and with intermediate interface in the X-axis TECHNICAL DETAILS Swing diameter over guide way protection:  500 mm Clamping chuck diameter:  170 (210) mm Transverse stroke (X axis):  190 mm Longitudinal stroke (Z axis):  525 mm Control:  SIEMENS SINUMERIK 840D solutionline operation with CELOS und ShopTurn 3G, Linux operating system. Rapid feed, X/Z axes:  30/30 m/min Y axis:  22.5 m/min Spindle nose size:  140 h5 mm Spindle diameter in front bearing:  100 mm  Spindle bore diameter: 73 mm AC main drive power (100 % - 40 % ED):  13 - 14 kW Bhwvef3cyds Torque (100% - 40% ED):  171.5 - 192 Nm Speed range:  20 - 6000 rpm MACHINE DETAILS Electrical connection:  5 conductor system, L1, L2, L3, N, PE Connected load:  total approx. 30 kVA Voltage:  400 V Frequency:  50 Hz Protection (slow-blow) acc. to VDE 0100: 63 A Permissible voltage fluctuation:  at 400 V: ±10 % Dimensions without chip conveyor L x W x H:  approx. 3330 x 2583 x 1829 mm Weight:  approx.. 4400 kg Fixed pick-up date of the machine on 27.12.23 or 09.01.24. Bidder is obliged to pick-up the machine on time.

more

Auction

7

Ends in

 d  Hrs  Min  Sec Auction ended

C-Y-axis lathe

DMG MORI CTX alpha 500

€60,000

Condition: excellent (used), Year of construction: 2008, Operating hours: 355 h, machine/vehicle number: 0045000018C, Functionality: fully functional, No minimum price - the highest bid is guaranteed to win! The machine is in a vocational school and has hardly been used - very few spindle hours! TECHNICAL DETAILS Turning length: 500 mm Y-axis stroke: ±40 mm (for cross slide) Speed: 6000 rpm C-axis: available Disk turret: Sauter 12-fold VDI 30 (driven) CNC control: Siemens 840D solutionline with ERGOline Programs: DMG MACHINEcheck, DMG AUTOshutdown and ShopTurn Drive power (100/40 % ED): 20/27 kW Drawtube inner diameter: 52 mm MACHINE DETAILS Connected load: 25 kVA Operating voltage: 400 V EQUIPMENT Tailstock Spindle brake Biizviz2wna Chip conveyor with coolant device Coolant spray gun Three-jaw power chuck with BBD 210/66 bore (made by SMW-Autoblock) Bar gripper, axial, complete, VDI 30 Workpiece pick-up device with automatic gripper arm, conveyor belt, protective flap

more

Auction

5

Ends in

 d  Hrs  Min  Sec Auction ended

Lathe

FAT Haco FTM165

€70,000

Condition: as good as new (ex-display), Year of construction: 2018, machine/vehicle number: 170803, Functionality: fully functional, Power - Precision - Performance This machine model is the most compact model from FAT Haco in the field of turning and milling centers. The machine has only been used a little and is therefore in mint condition! Including parts catcher for main and counter spindle and tool. TECHNICAL DETAILS Spindle distance: 1000 mm Turning diameter over bed: 550 mm Turning diameter: 350 Speed: 6000 rpm Control system: Siemens 840 D SL Y-axis: ± 35 mm Longitudinal travel: 210 mm Rapid traverse X/Z: 35 m/min Torque: 275 Nm Spindle nose according to DIN 55026: A2-6 Spindle taper: 1:20 Counter spindle speed: 6000 rpm Counter spindle rapid traverse: 30 m/min Counter spindle torque: 95 Nm Counter spindle nose: A2-6 Tool holder: VDI 40 Tool positions: 12 Tool holder diameter: 20 mm Index time: 0.2 s Speed: 4000 rpm Gpewoivph Quill taper: MT 4 Traversing method: automatic positioning Diameter of quill: 55 mm Tailstock stroke: 15 mm Thrust force: 4,400 N MACHINE DETAILS Dimensions: 1940 x 1860 x 3750 mm Weight: 6600 kg Power: 57 kW

more

Auction

6

Ends in

 d  Hrs  Min  Sec Auction ended

Vertical lathe

Titan Umaro SC 43 - F01

€105,000

Condition: refurbished (used), Year of construction: 2010, Functionality: fully functional, Machine is loaded free of charge - without additional costs! TECHNICAL DETAILS Table diameter: 4000 mm Face plate diameter: 4000 mm Turning diameter: approx. 4300 mm Rotation diameter: 4300 mm Cb9ts08 Control for program: Siemens Sinumerik 840D Vertical adjustment of supports right Z1: 705 mm Vertical adjustment of supports left Z2: 990 (+200) mm Workpiece height: max. 2580 mm Workpiece weight: 18.0 t Speed: 50 - 100 rpm Height above floor to top edge of table: 1090 mm Distance between side uprights inside up to a height of 500 mm: 4,300 mm Distance between side uprights inside from a height of 500 mm: 2,580 mm Height lower edge of support/table: max. 2,250 mm Distance left support Z 2 to table: max. 2,560 mm Distance right support Z 1 to table: max. 2,550 mm Distance left to right support Z2 to Z1: max. 4,830 mm Carrier lift adjustable in height on side stand: approx. 2000 mm MACHINE DETAILS Total power requirement: 150 kW Machine weight: approx. 88.0 t Machine dimensions: 6,000 x 8,000 x 6,400 mm Footprint: 8.0 x 10.0 x 6.8 m EQUIPMENT 4x clamping elements approx. 1200 mm (additional clamping jaws optionally available) Various supports for alignment (height) lying on pallet Chip conveyor (6.9 x 1.25 x 1.1 m)

more

Listing

Request more images Request more images Already requested

9

Burscough

203 km

CNC Lathe

Colchester Tornado 300

Price info Price info Already requested Call

Condition: good (used), Year of construction: 1997, Year 1997 F3fwow9 Under power for any inspection - We welcome any viewings 3 Phase Fanuc Series OT CNC Control Swarf Conveyor 530mm swing over bed 300mm swing over cross slide 800mm between centres 3000rpm spindle speeds 22kw motor VDI Tooling & jaws included

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

United Kingdom

0 km

cnc lathe

Muratec MT100

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2016, MURATEC MT100 WITH MURATEC FANUC CNC CONTROL (2016/03) INSTALLED 2018, GANTRY UNLOADING SYSTEM & LNS ALPHA SL65S BAR FEED Twin Spindle Collet Chucks (Spindle Nose JIS A2-5). Twin Turret Both With 'Y' Axis. Maximum Swing Ø190mm. Axis Travel Upper Turret 'X'=150mm, 'Z'=620mm, 'Y'=±30 mm. Lower Turret 'X'=150mm, 'Z'=620mm, 'Y'=±30 mm. Right Spindle Travel 'Z'=680mm. Axis Rapid Traverse 'X'=24m/min, 'Z'=40m/min, 'Y'=12m/min, 'Z's'=36m/min. 15 Station Turrets. Maximum Spindle Speed 6,000rpm (11kW Motor). Maximum Driven Tool 6,000rpm (2.2kW Motor). Maximum Bar Size Ø51 x 620mm. Power on 14,751h, Run Time 13,329h, Cutting 5,962h. S/No.15KX312450001018), Bar Feed S/No.29115001 (2018). Fljj9weyh

Price info Price info Already requested more

Auction

6

Ends in

 d  Hrs  Min  Sec Auction ended

Lathe

DMG MORI ecoTurn 450

€24,000

Condition: excellent (used), Year of construction: 2015, Operating hours: 13,115 h, machine/vehicle number: 0031000209A, Functionality: fully functional, TECHNICAL DETAILS Swivel range: max. 650 mm Movement via cross slide: 465 mm Turning diameter: max. 400 mm Transverse travel (X): 267.5 mm Longitudinal travel (Z): 600 mm Maximum speed: 4000 rpm Controls: SIMline with operation on SIEMENS 840D solution line Rapid traverse (X/Z): 30/30 m/min Spindle head (flat flange): 170 h5 mm Bar capacity: Ø 65 / 75 mm Spindle diameter in front bearing: 130 mm Drill chuck: 250/315 Drive power (40/100% ED): 17.5 / 12.5 kW Maximum torque (40/100% ED): 370 / 280 Nm Ljew3o0nvj According to ISO 230-2 in X/Z axes (indirect measuring system): 8/8 μm According to ISO 230-2 for C-axis: 20 μm Number of tool positions: 12 Driven tool stations: 12 Shank diameter: 40 mm Drive power (40% ED) at 2000 rpm: 4.2 kW Maximum torque (40% ED): 20 Nm Maximum speed: 4000 rpm MACHINE DETAILS Weight: 5800 kg Fixed pick-up date of the machine on 27.12.23 or 09.01.24. The bidder is obliged to pick up the machine on time.

more

Listing

Request more images Request more images Already requested

10

Wishaw

56 km

CNC Lathe

Harrison Alpha 2800 XS

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2012, Harrison Alpha 2800 XS CNC Lathe Model: 2800 XS Year: 2012 Control: FANUC Series Oi-TD Swing over Bed: 1000mm Swing over Cross Slide: 710mm Swing on Gap: 1300mm Distance Between Centres: 4000mm Spindle Bore: 155mm dia. Spindle Speeds: 9 – 1400 RPM Machine with: 800mm dia. 4 – jaw chuck Fixed Steadies Cxyd2z2qtv Boring Bar Attachment Quick Change Toolpost Selection of Toolholders PHOTOGRAPHS TAKEN ON SITE BEFORE CLEANING AND SERVICING

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

Albion Works, Savile St, Sheffield S4 7UD, UK

256 km

UK ONLY SALE - NEW CNC Lathe

Hyundai-Wia SE2200LY

Price info Price info Already requested Call

Condition: new, Year of construction: 2023, machine/vehicle number: G1705-0085, This machine is only available to customers in the United Kingdom & Republic of Ireland LONG BED CNC TURNING CENTRE WITH ROLLER LM GUIDEWAYS, HIGH SPEED SERVO TURRET, Y-AXIS, C-AXIS & DRIVEN TOOLS & 8″ STD CHUCK SIZE MACHINE CAPACITIES Swing Over the Bed - Ø 600 MM Swing Over the Carriage - Ø 600 MM Maximum Turning Diameter - Ø 300 MM Maximum Turning Length - 508 MM Bar Capacity - Ø 65 MM SPINDLE Chuck Size - Ø (8”) 203 MM Spindle Bore - Ø 75 MM Bijafev9gsy Spindle Speed (Rpm) - 4,500 RPM Motor (Max / Cont.) - 15.0 / 11.0 KW Torque (Max / Cont.) - 167 / 150.3 NM Spindle Type - BELT Spindle Nose - A2-6 FEED Travel X - 210 MM Travel Y - 110 (+55) MM Travel Z - 560 MM Rapid Speed (X) - 30 M / MIN Rapid Speed (Y) - 10 M / MIN Rapid Speed (Z) - 36 M / MIN Slide Type - ROLLER LM GUIDEWAYS TURRET Number of Tools - 12 Tool Size (OD) - Ø 20 MM² Tool Size (ID) - Ø 32 MM² Indexing Time - 0.15 SEC / STEP Y-Axis Type - WEDGE TYPE LIVE TOOL Milling Tool Speed - 6,000 RPM Motor (Max / Cont.) - 2.75 / 1.85 KW Torque (Max / Cont.) - 26.2 / 27.0 NM Collet Size - Ø 13 – ER 32 Type - BMT45 TAILSTOCK Type - Hydraulic NC Tailstock (Standard Live Centre) Taper - MT#4 Quill Diameter - Ø 56 MM Travel - 750 MM TANK CAPACITY Coolant Tank - 200 L Lubricating Tank - 0.7 L POWER SUPPLY Electric Power Supply - 18 KVA Thickness of Power Cable - OVER 16 MM² Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 2,960 X 1730 MM Height 1,920 MM Weight 4,200 KGS FANUC 0IT PLUS CNC

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

11

Thurmaston

338 km

cnc lathe, with L&Y axis

Doosan Lyna2100LYA

Price info Price info Already requested Call

Condition: like new (used), Year of construction: 2021, Operating hours: 465 h, Swing over bed 600mm, swing over carriage 400mm, bar capacity 51mm, machining diameter 300mm, machining length 510mm, 24 position turret, Fanuc series I control, Bilmyjnn3bh Spindle speed 6,000 rpm, milling speed 6,000rpm, Y axis +/ - 52.5mm, C axis 0.001 degrees, swarf conveyor, tool setter, parts catcher, fume extractor, tailstock.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Shenstone

322 km

Sliding Head Lathe

Citizen Cincom L32-1M8

€110,000

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: good (used), Year of construction: 2018, L32-VIII with Iemca Boss 338-37-HD Bar feed. Options include: 38mm Diameter Capacity Guide Brushless Swarf Conveyor High Pressure Coolant LFV Low frequency vibration. Be3yh0l Absolent Mist Extractor Fire Trace Extinguisher System. It has been serviced by Citizen since new.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

United Kingdom

0 km

cnc lathe

Dean Smith & Grace 30P X 120

Price info Price info Already requested Call

Condition: good (used), Year of construction: 2013, DEAN SMITH & GRACE 30P X 120, 15" HOLLOW SPINDLE MANUAL PLUS CNC OIL COUNTRY LATHE WITH HEIDENHAIN CONTROL Bihxq0v3goo Ø760mm 4 Jaw Chuck & Rear Spindle Chuck. Maximum Swing Over Bed Ø813mm. Maximum Swing Over Saddle Ø508mm. Distance Between Centres 3,005mm. Spindle Bore Ø375mm. 4 Speed Gear Box-Maximum Geared Speed Ranges 35, 177, 250, 355rpm. QTC. S/No. 42390 (2013).

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

13

Wijchen

(dealership location)

725 km

Metal lathe turning machine Colchester Mastiff

Colchester Mastiff 1800

Price info Price info Already requested Call

Condition: used, Lathe, Metal turning machine Model: Conventional Manufacturer: Colchester Type:&nbsp Mastiff 1800 Digital-readout:&nbsp Heidenhain Turning-diameter: 554mm Turning-diameter gapbed: 830mm&nbsp Center-distance: 2000mm Spindle-hole: 90mm Spindle-speed: 18-1800 rpm Spindle-motor: 11kW Including 3-jaw chuck, lynette, multifix and documentation Weight: 2850kg Dimensions: 3500x1500x1700mm C9ybgrm

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Wishaw

56 km

cnc lathe

DAEWOO Puma 250 LMB

Price info Price info Already requested Call

turning length: 1,330 mm, turning diameter: 570 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, travel distance Z-axis: 1,330 mm, main spindle motor power: 22 W, Condition: good (used), Year of construction: 1998, Model: Puma 250 LMB Year: 1998 Control: FANUC O-T Max. Turning Dia.: 570mm Lfjlanloyt Max turning length: 1330mm Spindle Bore: 90mm dia. Spindle Speeds: 3500 RPM Spindle Power: 22 KW Indexing Turret: 12 station Machine with: 12” dia. 3 – jaw chuck Driven tools Tool setter Photographs taken on site prior to cleaning and servicing

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

7

Albion Works, Savile St, Sheffield S4 7UD, UK

256 km

semi CNC lathe

Harrison Alpha 400

€5,000

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Year of construction: 2005, Harrison Alpha 400 CNC lathe good condition Yuovbg

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

8

Thurmaston

338 km

cnc lathe, with C & Y axis , milling ,

DOOSAN Puma 2100SY

Price info Price info Already requested Call

Condition: good (used), Year of construction: 2012, Maximum turning diameter 406mm, Maximum turning length 520mm, Dmu0kj bar capacity 65mm, Y axis -/+ 51mm, sub-spindle speed 4,500 rpm, milling speed 5,000rpm, 12 station turret, 18.5 kw main motor, C axis 0.001degrees, Fanuc I series control, parts catcher, tool setter, swarf conveyor, parts conveyor .

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

15

Deventer

720 km

CNC lathe

Doosan Lynx 2100 LMB

€69,500

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: like new (used), Year of construction: 2018, Doosan Lynx 2100 LMB BK 2018 Driven tools Tooling included B0bdons9 Machine has few working hours and is in very good condition (as new)

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

United Kingdom

0 km

center lathe

Colchester Storm 1300S

Price info Price info Already requested Call

Condition: good (used), Year of construction: 2010, COLCHESTER HARRISON STORM 1300S WITH FANUC SERIES OI-MC CONTROL (2010) Table Dimension 1,400 x 600mm (5 'T' Slots). Table Load 1,500kg . Axis Travels 'X'=1,300mm, 'Y'=600mm, 'Z'=710mm. Spindle Nose To Table 150-860mm. Spindle Nose to Collet 700mm. Ballscrew Diameter Ø40mm. Ballscrew Pitch 10mm. Maximum Spindle Speed 6,000rpm. Rapid Traverse 'X/Y'=15m/min. Rapid Traverse 'Z'=12m/min. Cutting Feed Rate 1-5,000mm/min. 20 Position ATC. S/No. M1S044 (2010). L0hujwyjfz

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

14

Wijchen

(dealership location)

725 km

Metal lathe turning machine TOS SUI 63,

TOS Trencin SUI 63, 630x3000mm

Price info Price info Already requested Call

Condition: used, Lathe, Metal turning machine Model: Conventional Manufacturer:&nbsp TOS Type:&nbsp SUI-63 Digital-readout:&nbsp GT DRO Turning-diameter: 630mm Centerdistance: 3000mm Spindle-hole: 72mm Spindle-speed: 11,2-1800 rpm Iaxyo9byy Motor-power: 4kW Incl. Lunette (2x) Incl. Three-jaw chuck +&nbsp Four-jaw chuck

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

15

Wishaw

56 km

cnc lathe

DOOSAN Puma 2600LY

Price info Price info Already requested Call

turning diameter over cross slide: 630 mm, turning length: 1,280 mm, turning diameter: 780 mm, Condition: excellent (used), Year of construction: 2021, Operating hours: 200 h, Model:2600 LY Control: Fanuc Oi TF Plus with Manual I Guide Year:2021 Swing Over Bed: 780mm Swing Over Saddle: 630mm Max Turning Dia: 376mm Max Turning Distance:1280mm On Time Hours: Under 300 Hours Machine With: Swarf Conveyor Swarf Bin 250mm Power Chuck Programmable Fixed Steady Tool Eye Parts Catcher Lcahcnwfp2 2 Radial Driven Tools 2 Axial Driven Tools Machine in as new condition

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

2

Albion Works, Savile St, Sheffield S4 7UD, UK

256 km

UK ONLY SALE - NEW CNC Lathe

Hyundai-Wia L300LMA

Price info Price info Already requested Call

Condition: new, Year of construction: 2019, machine/vehicle number: G3171-0100, This machine is only available to customers in the United Kingdom & Republic of Ireland HEAVY DUTY 3-AXIS SLANT BED, EXTRA LENGTH CNC TURNING CENTRE WITH C-AXIS & DRIVEN TOOLS, HARDENED & GROUND BOX GUIDEWAYS, BMT65 TURRET & 10" STANDARD CHUCK SIZE MACHINE CAPACITIES Swing Over the Bed - Ø 750 MM Swing Over the Carriage - Ø 480 MM Maximum Turning Diameter - Ø 410 MM Maximum Turning Length - 1,280 MM Bar Capacity - Ø 76 MM SPINDLE Chuck Size - Ø (10”) 254 MM Spindle Bore - Ø 95 MM Spindle Speed (Rpm) - 3,500 RPM Motor (Max / Cont.) - 22.0 / 18.5 KW Torque (Max / Cont.) - 493.2 / 414.7 NM Jieo9kb Spindle Type - BELT Spindle Nose - A2-8 C-Axis Indexing - 360° (0.001°) FEED Travel X - 290 MM Travel Z - 1,350 MM Rapid Speed (X) - 20 M / MIN Rapid Speed (Z) - 24 M / MIN Slide Type - HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools - 12 Tool Size (OD) - Ø 25 MM² Tool Size (ID) - Ø 50 MM² Indexing Time - 0.3 SEC / STEP LIVE TOOL Motor (Max / Cont.) - 5.5 / 3.7 KW Milling Tool Speed - 4,000 RPM Torque (Max / Cont.) - 35.0 / 23.5 NM Collet Size - Ø 20 – ER 32 Type - BMT65P TAILSTOCK Taper - MT 5 Quill Diameter - Ø 100 MM Quill Travel - 120 MM Travel - 750 MM TANK CAPACITY Coolant Tank - 270 L Lubricating Tank - 1.8 L POWER SUPPLY Electric Power Supply - 27 KVA Thickness of Power Cable - OVER 35 MM² Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 4,171 X 2,002 MM Height 1,997 MM Weight 7,700 KGS FANUC 0IT CNC

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Thurmaston

338 km

cnc lathe

HAAS ST-15Y

Price info Price info Already requested Call

Condition: like new (used), Year of construction: 2018, Maximum swing 419mm, Maximum cutting diameter 279mm , maximum machining length 406mm, bar capacity 64 mm, C9zaevy Y axis +/- 51mm, spindle speed 4000 rpm, 20 hp spindle motor, 12 station turret, coolant , parts catcher and swarf conveyor, 3 jaw chuck, toolsetter, Haas magazine barfeed

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

14

Deventer

720 km

CNC lathe

DOOSAN Puma 2100 SY

€79,900

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: excellent (used), Year of construction: 2014, Doosan Puma 2100 SY BJ 2014 Driven tools, subspindle and Y-axis Sbxkm7uhk Tooling included

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

8

Holton Heath

527 km

cnc lathe

Mazak SQT 250M

Price info Price info Already requested Call

turning length: 497 mm, turning diameter: 525 mm, spindle bore: 76 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 35 rpm, travel distance Z-axis: 575 mm, main spindle motor power: 18 W, rapid traverse X-axis: 190 mm/min, total height: 2,200 cm, total length: 3,100 cm, total width: 1,700 cm, overall weight: 5,050 kg, spindle nose: A2-6, Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, TAILSTOCK QUILL STROKE: 150 MM TAILSTOCK CENTER: MK 5 TAILSTOCK TRAVEL :400 MM - X/Z-AXIS: 0-5. 000 MM/MIN C-AXIS: 1 - 2. 000 /MIN MAX. SWING DIAMETER: 525 MM MAX. MACHINING DIAMETER: 300 MM - MAX. MACHINING LENGTH: 497 MM MAX. BAR MATERIAL DIAMETER: 64 MM SPINDLE MAX. TORQUE :350 NM: L33kopbqtf SPINDLE NOSE A2 -6" NUMBER OF TURRETS; 12 LIVE TOOL HOLDERS

Price info Price info Already requested more

Listing

Wijchen

(dealership location)

725 km

Metal lathe turning machine CNC Traub TND400x800mm

Traub TND400x800mm

Price info Price info Already requested Call

Condition: used, Year of construction: 1990, Operating hours: 29,000 h, Metal turning machine, lathe Model: CNC Manufacturer:&nbsp Traub Type:&nbsp TND400 Year: 1990 Controller:&nbsp TX 8F Max. Turning length: 800mm Turning diameter:&nbsp 400mm B3e3pfvwil Spindle-hole: 65mm Spindle-speed: 40-4000rpm Turret:&nbsp 12&nbsp Tools Incl.&nbsp Chipconveyor and documentation.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

12

Wishaw

56 km

cnc lathe

Harrison Alpha 1460

Price info Price info Already requested Call

turning diameter over cross slide: 270 mm, turning length: 1,500 mm, turning diameter: 460 mm, spindle bore: 78 mm, spindle speed (max.): 2,200 rpm, Condition: excellent (used), Year of construction: 2006, Model: Alpha 1460 XS Year: 2006 Control: FANUC Alpha X Series Swing over Bed: 460mm 0292zefs Swing in Gap: 730mm Swing over Cross Slide: 270mm Distance Between Centres: 1500mm Spindle Bore: 78mm dia. Spindle Speeds: 2200 RPM Machine With: 3 – jaw chuck Quick change toolpost

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

7

Albion Works, Savile St, Sheffield S4 7UD, UK

256 km

Flat bed 3 axis CNC lathe

Pinacho ST-310-105 x 2000

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 2017, USED PINACHO ST-310-105 x 2000 3 AXIS CNC LATHE YEAR OF MANUFACTURE 2017 – SERIAL NUMBER 170022-T MACHINE CONSTRUCTION & FEATURES • ONE PIECE CAST IRON BED CONSTRUCTION • HARDENED & GROUND SOLID SLIDEWAYS • 12 STATION AUTOMATIC DRIVEN TOOL TURRET • MANUAL TAILSTOCK • FANUC 0ITF CONTROL WITH MGI MACHINE CAPACITIES Centre Height 310 MM Swing Over The Bed Ø 620 MM Swing Over The Carriage Ø 540 MM Distance Between Centres 2,000 MM SPINDLE Spindle Bore Ø 105 MM Spindle Nose A2-8 Spindle Speeds Max. 2,500 RPM Bf8me38k Spindle Centre Taper (Bore 105 Mm) 5MT CARRIAGE Turret AUTO V12 VDI30 WITH LIVE TOOLS Number Of Turret Stations 8 [12] Driven Tools Speed 3,000 RPM Std. Tool Size (Tool Shank / Boring Bar) 25 / 40 MM Working Feedrate (X & Z) 0 TO 7,500 MM/MIN X-Axis Rapid Traverse 15 M / MIN Z-Axis Rapid Traverse 12 M / MIN X-Axis Ballscrew Diameter 20 MM Z-Axis Ballscrew Diameter 40 MM TAILSTOCK Tailstock Quill Diameter 95 MM Tailstock Spindle Taper 5MT Maximum Quill Travel 220 MM MOTOR Main Spindle Motor 15.0 KW Pump Motor 0.37 KW SIZE AND WEIGHT Length 3,920 MM Width 1,605 MM Height 2,014 MM Weight 3,010 KGS STANDARD MACHINE EQUIPMENT • Electronic Handwheel For X & Z Axes • Main Spindle Reduction Bush & Fixed Centre • Full Ce Spec Guarding Enclosure • Work Light • Coolant System • Tower Lamp • Automatic Slideway Lubrication • Casting Pedestals & Levelling Plates • Chip Collection Tray • Machine Handbooks & Instruction Manuals

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Thurmaston

338 km

cnc lathe, with milling

DAEWOO Puma 400MB

Price info Price info Already requested Call

Condition: good (used), Year of construction: 2005, 770mm Swing, 560mm max. machining diameter, 978mm maximum turning length, Imtmyapu 2000rpm spindle, 116mm bar capacity, 12 station turret, 0.001 degree C axis with Milling (7.5kW/3000rpm), 26kW spindle motor, FANUC 21i-T control, 3 Jaw Power Chuck, Tailstock, Tool Setter, Swarf Conveyor, Coolant

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

9

Schijndel

723 km

Lathe

Sunmaster FC-1860V

Price info Price info Already requested Call

Condition: new, Year of construction: 2023, 462 x 1500 mm, 80 mm clearance Constant variable cutting speed Fixed goggles Travelling goggles Cooling MT5 Center Standard machine tools Manual and spare parts list 3 claws 10" with soft jaws Multifix quick-change toolholder 2-axis digital display FAGOR Bffdw7mnzrg Spindle brake LED machine lamp

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

9

Niederlangen

753 km

lathe-conventional-electronic

WEILER Praktikant

Price info Price info Already requested Call

Condition: used, turning diameter over bed 300 mm turning diameter over slide rest 150 mm turning length 800 mm spindle bore 35 mm turning speed range 42 - 2000 U/min feeds 0,011 - 0,91 mm/U Fb99wy9 tailstock quill taper MT 3 total power requirement 2,2 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,7 x 0,8 x 2,0 m

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

14

Wijchen

(dealership location)

725 km

Metal lathe turning machine MONOFAP 260EA

Antonio Anselmi MONOFAP 260EA

Price info Price info Already requested Call

Condition: used, Lathe Metal lathe, Model: Conventional Qeadgzn Manufacturer:&nbsp Antonio Anselmi Type: MONOFAP 260EA Digital readout Turning-diameter: 520mm Center-distance: 1000mm Spindle-hole: 55mm Spindle-speed: 18-1400 rpm Incl. Multifix Weight: 1500kg Dimensions: 2500x1100x1700mm

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Babberich

740 km

Guidance and lathe

VDF Boehringer DUE 560

Price info Price info Already requested Call

turning diameter over cross slide: 315 mm, spindle bore: 62 mm, turning diameter: 570 mm, turning length: 2,000 mm, Condition: good (used), Year of construction: 1992, Manufacturer: VDF Boehringer Type: DUE 560 Year of construction: 1992 Digital readout HeidenHain in 3 Axis Feeds all direction 3 chuck Forkhardt Multifix tool system Specifications Metric US Standard Turning length 2000 mm Turning diameter bed Ø 570 mm Turning diameter slide 315 mm Spindle bore 62 mm Spindle power 15 kW Bed width 360 mm Quill stroke Bigtqblzt2u 200 mm Spindle holder 5 Mk spindle speed 2240 rpm Dimensions (estimate) length 3500 mm width 1800 mm height 1900 mm weight 4600 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Swansea

420 km

CNC Lathe

HAAS ST-10

US$34,000

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: excellent (used), Year of construction: 2018, Operating hours: 7,000 h, machine/vehicle number: 3109943, Haas 2018 ST10 CNC Lathe Overview Alignment & Maintenance: The lathe recently underwent a thorough alignment check to ensure the highest degree of precision. Additionally, it's been fitted with new belts for sustained peak performance. Bar Feed Compatibility: While the machine is set up to accommodate a bar feed system, it's essential to note that the bar feed itself isn't part of this offer. Spindle Capability: With a 6k spindle, it's adept at handling a diverse range of machining applications that demand both speed and precision. Coolant System: The integrated through turret coolant system is a noteworthy feature, ensuring efficient heat dissipation. This translates to prolonged tool life and consistently high-quality finishes. Cfgwuich Control System: Equipped with the ever-reliable Fanuc Control, it's recognized in the engineering community for stability and precision. Live Demonstration: We believe in firsthand experiences. Therefore, we welcome you to our facility in Swansea, Wales. Here, you can see the machine in operation, giving you a clear perspective of its capabilities and condition. Reason for Sale: It's worth noting that our decision to sell is strategic. We're looking to trade turning capacity in favor of increasing our milling capabilities. For engineering professionals valuing precision, reliability, and consistent output, the Haas 2018 ST10 Lathe stands out as a solid contender. We're open to conversations on how this machine can seamlessly integrate into your operational workflow.

Send inquiry Send inquiry Already requested more

Listing

Mönchengladbach

804 km

CNC-Vertical Turret Lathe - Single Col.

DÖRRIES VCE 200/140

Price info Price info Already requested Call

Condition: used, faceplate diameter:1400 mm swing diameter:2000 mm turning height:1500 mm main drive:80 kW faceplate speeds from - to:1 - 355 U/min Vwavni milling motor:37 kW milling head speed:7 - 3000 U/min milling spindle - taper:ISO 50 cross rail adjustment - vertical:500 mm ram head dimension:240 x 240 mm max. ram stroke:1250 mm weight of the machine ca.:50 to total power requirement:133 kVA dimensions of the machine ca.:11 x 5 x 6,4 m Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools - C-axis, live tooling - complete splash housing - coolant device, chip conveyor - diverse accessories

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

9

Schijndel

723 km

Conv. lathe.

Sunmaster CH-2690

Price info Price info Already requested Call

Condition: new, Year of construction: 2023, 660 x 2300 mm, 104 mm passage EVS Variable spindle speed Cooling 2 pieces MT5 Center Standard machine tools M9yev3ba Manual and spare parts list 3 claws 12" Sk type 2-axis digital display FAGOR Quick change chisel turret

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

7

Niederlangen

753 km

lathe-conventional-electronic

OPTIMUM OPTIturn TH4215D

Price info Price info Already requested Call

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle Ctp7ghza8m - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

11

Wijchen

(dealership location)

725 km

Metal lathe turning machine H. Ernault Somua

H. Ernault Somua Jupiter 830x2000mm

Price info Price info Already requested Call

Condition: used, Lathe Metal lathe Model: Conventional Manufacturer: H. Ernault Somua Type: Jupiter 830 Digital readout Turning diameter: 830mm Center distance: 2000mm Center height: 415mm Spindle hole: 82mm Spindle speed: 16-1600 rpm Motorpower: 20kW Incl. glasses, three-claw-chuck and four-claw-chuck Machine weight: 5000kg Gmlbvycc Machine dimensions: 4100x1900x1900mm

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

3

Hattingen

(dealership location)

831 km

Bar Automatic Lathe - Multi Spindle

INDEX MS 52 C

Price info Price info Already requested Call

Condition: used, Year of construction: 2013, spindle passage 52 mm Max. Turning length 180 mm control Siemens 840 D CNC multi-spindle automatic lathe | INDEX - MS52C equipped with a loading/unloading automation Equipment: - 6 main spindles, - 2 steering positions, - coolant device, - Chip conveyor: Knoll - 400 S-1, - Belt filter system: Knoll, - Industrial robots: Stäubli, Bil7b7wnryi - programming panel, - settling device, further equipment: - 6x2 cross slides with each X and Z axis, - 9x additional Y axis, - 1x additional X-axis (6.3), - Counter spindle on 6.1 Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MS 52 | MS-52 | MS52 | MS 52C | MS-52C | MS 52 C

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

Niederlangen

753 km

lathe-conventional-electronic

OPTIMUM OPTIturn TH 3309D

Price info Price info Already requested Call

Condition: new, turning diameter 330 mm turning length 830 mm swing diameter over bed slide 196 mm Swingdiameter in the bed bridge 170 centre height 165 mm centre distance 830 mm Turning length in the bed bridge 430 reus 16 (70-2000) U/min tail stock MK 3 quill stroke 110 mm diameter of quill 32 mm spindle taper DIN ISO 702-2 Nr. 4 spindle bore 38 mm spindle cone MK 5 feed längs 32 / 0,052 1,392 m/min feed plan 3,2 / 0,014 0,38 m/min total power requirement kW weight of the machine ca. 0,52 t dimensions of the machine ca. 1,7 x 0,75 x 1,6 m Fully equipped leading and tension spindle lathes. TH 3309D with digital position indicator DPA 21/3402040 Bushaq0ws - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 4 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Main spindle running in an oil bath - Gear wheels run smoothly, hardened and ground - Upper slide adjustment range ± 90 ° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Handwheels decoupled and tested according to EN 23125 - Safety handwheels with push-out function in the X and Z axes - Two-channel right-left switch tested according to EN 23125 - DC 24 volt electrical system with two-channel safety circuit according to EN 23125 - Lathe chuck protection tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - Lockable main switch - Clockwise / counterclockwise rotation on the bed slide switchable - Lead screw cover - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and handwheel with adjustable fine scale 0.02 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, inductively hardened and precision ground - Machine base with tool compartment on the right-hand side (left-hand side with 3 Bezels (no compartments) - Pull-out chip tray with guide rails - Emergency stop device with foot actuation - LED machine lamp integrated in the chip guard Digital position indicator DPA 21 - User-friendly membrane keyboard, splash-proof, closed and glare-free - glass rulers scope of delivery - Fixed steady rest passage Ø 6 - Ø 50 mm - Moving steady rest passage Ø 8 - Ø 30 mm - LED machine light - Reduction sleeve MK 5 / MK 3 - Two fixed centering points MK 3 - Quadruple steel holder 16 mm - Change gears set - machine base - Initial machine filling with quality oil - operating tool Including special accessories OPTIMUM three-jaw lathe chuck, centric clamping Ø 200 mm Camlock DIN ISO 702-2 No. 4/3442762

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

14

Wijchen

(dealership location)

725 km

Metal lathe turning machine EST Ticino 840x2000mm

EST Ticino 840x2000mm

Price info Price info Already requested Call

Condition: used, Year of construction: 1983, Lathe, Metal turning machine Model: Conventional Manufacturer:&nbsp EST Ticino Type: 420.2000 Turning-diameter: 840mm Turning-diameter&nbsp gapbed: 1650mm Spindle-hole: 132mm Centerdistrance: 2000mm Spindle-speed: 8-600 Adjustable/extendable gapbed! Incl. Mitutoyo digital readout Incl. Lunette Machine-dimensions: 4350x1800x1900mm Svbnp

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

4

Hattingen

(dealership location)

831 km

Bar Automatic Lathe - Multi Spindle

INDEX MS 52 C

Price info Price info Already requested Call

Condition: used, Year of construction: 2015, spindle passage 52 mm Max. Turning length 180 mm control Siemens 840 D CNC multi-spindle automatic lathe | INDEX - MS52C equipped with a integrated loading and removal robot Equipment: - Chip conveyor: Knoll 400S-1, - Fine chip conveyor: Knoll VRF500, - suction unit: Büchel, - pallet changing unit, - Coolant and lubricant preparation: Knoll, - separate robot control unit: CS8CIC (built in 2014), - loading and unloading handling, with 2-fold loading and unloading device, travel distance approx. 250mm, - raw part feeding, - Prefabricated part removal, each on an electric conveyor belt, Siemens control, with touch panel, integrated Kraft & Bauer FB704 CO2 extinguishing system further equipment: L8nhcl7jaf - 6x2 cross slides with each X and Z axis, - 9x additional Y axis, - 1x additional X-axis (6.3), - Counter spindle on 6.1 Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MS 52 | MS-52 | MS52 | MS 52C | MS-52C | MS 52 C

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

14

Wijchen

(dealership location)

725 km

Metal lathe turning machine Colchester 450x2000mm

Colchester Mascot 1600, 450x2000mm

Price info Price info Already requested Call

Condition: used, Lathe, Metal turning machine Model: Conventional Manufacturer:&nbsp Colchester Type: Mascot 1600 Turning-diameter: 450mm Turning-diameter&nbsp gapbed: 700mm Spindle-hole: 78mm Centerdistrance: 2000mm Spindle-speed: 20-1600 Be0vm7bs Incl. Sonydigital readout Machine-dimensions: 3500x1000x1700mm

Price info Price info Already requested more

Listing

Wijchen

(dealership location)

725 km

Carousel lathe, vertical metal turning lathe

TITAN UMARO SC-22-CC, 2200mm

Price info Price info Already requested Call

Condition: used, Year of construction: 2007, Vertical metal turning lathe Model:&nbsp Carousel lathe - Double Column Manufacturer:&nbsp TITAN UMARO Type:&nbsp SC-22-CC Year: 2007 Model: Conventional with digital readout Maximum turning diameter: 2200mm 4-claw: 2000mm Maximum turning height: 1500mm Maximum workpiece weight:&nbsp 12000kg Spindle-speed: 1,55-140&nbsp rpm Main-motor: 49,5kW Incl.&nbsp double&nbsp digital readout Incl. other tooling/peripherals Machine dismantled for transport. Machine-weight: 29500kg Ehjfxrn

Price info Price info Already requested more

Save search query