Used cNC lathes 200-249mm turning diameter for sale (112)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 6,615 h, functionality: fully functional, machine/vehicle number: R2EV3403, turning length: 310 mm, turning diameter: 220 mm, spindle speed (max.): 6,300 rpm, turning diameter over bed slide: 430 mm, bar passage: 45 mm, TECHNICAL DETAILS Work Area Swing over bed: 430 mm Max. turning diameter: 220 mm Max. turning length: 310 mm Max. bar capacity: 45 mm Distance between centers: 687 mm Carriage Travel X-axis travel: 160 mm Z-axis travel: 310 mm Main Spindle Spindle nose to DIN: 55026 KK5 Front spindle bearing diameter: 80 mm Hollow clamping cylinder max. through bore: 45 mm Max. chuck size: 160 mm Speed range (infinitely variable): 0–6,300 rpm Max. torque: 78 Nm C Axis (Rotary Axis) Resolution: 0.001° Tjdpfx Adexvrv Tslof Spindle indexing (disc brake, for driven tools): 0.01° Feed Drives Feed force X: 4 N Feed force Z: 6 N Rapid traverse speed X: 20 m/min Rapid traverse speed Z: 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Positioning spread P₉ as per VDI 3441 in X/Z: 3 / 3 µm Tool System Tool holders to DIN: 69880 VDI30 Tool cross section for square shank tools: 20 x 20 mm Shank diameter for boring bars: Ø32 mm Number of tool stations / powered (option): 12 / 6 Turret indexing time: 0.14 s MACHINE DETAILS Total power requirement: 17 kW Dimensions & Weight Footprint: 2.25 x 1.63 x 1.94 m Machine weight: 3.3 t Operating hours: 6,615 h EQUIPMENT - Integrated holding brake for driven tools - Disc turret with direction logic - AC motors on X and Z axes

Condition: used, AJAX AJAT360X1000 CNC Lathe, Swing Over Bed 320mm, Distance between Centres 750 - 1000mm, Swing Over Cross Slide 150mm, Spindle Nose A2 - 5, Spindle Bore 55mm, Spindle Speed 150 - 2000rpm, Chuck Size 200mm, Tailstock Barrel Diameter 32mm, Tailstock Barrel Travel 100mm, Tailstock Morse Taper MT3, Motor Power 3 - 7kw, Machine Work Hours - 100 hours Tsdpfxoxzf Ige Adlof Location: These lots are located in Newcastle upon Tyne, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2011, 400mm swing over bed, 216mm Swing over the Cross-slide, 760mm between centres, 54mm spindle bore, 2500rpm spindle, 5.75kW Spindle Motor, Tedpeucdt Asfx Adlef Prototrak SLX Control, 3 jaw chuck, auto toolpost, Tailstock, Coolant

Condition: used, Year of construction: 2000, machine/vehicle number: 202000, Hegenscheidt MFD 7893 CNC Deep Rolling Machine Tedpfexxylusx Adlof max length 920mm, max radius of counter weight (deending on dtroke and bearing width) 195 - 270mm, max 8 main + 6 pin bearings, min/max main bearing dia 33 - 88mm, min/max pin bearing dia 30 - 84mm, max bearing width 18,5mm, max stroke 140mm, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 35kVA, weight 13to

Condition: excellent (used), Year of construction: 2005, operating hours: 1,963 h, functionality: fully functional, machine/vehicle number: 69724, type of input current: three-phase, Please message us with any questions we are aware there is limited information provided. Tsdpjxvp E Ejfx Adlof

Condition: new, The LabTurn 2028 CNC, part of the CNC Slant Bed Lathes category and 2-axis CNC Lathes group, is designed for both CNC training and the efficient production of small workpieces. This compact and mobile lathe combines the functionality of larger production machines with a robust cast-iron inclined bed design, ensuring excellent stability for precise machining. The machine features an 8-station tool turret with four tools each for inside and outside turning and a max spindle speed of 3000 rpm, enabling versatility in various applications. Additionally, the Siemens 808D Advance controller provides an intuitive interface for beginners. The LabTurn includes a 100 mm 3-jaw chuck, hydraulic tailstock, and a well-structured design with an enclosed workspace for safety. Enhance your machining capabilities with the LabTurn and experience the potential for high precision and performance. Request a quote today to explore this superior CNC Slant Bed Lathe. Tsdpfeuy Iclox Adljf

Condition: excellent (used), Year of construction: 2015, AJAX AJEV 180 x 750 CNC Turning Centre with Duplamatic style Turret, Tailstock, Fanuc Oi Mate - TD control. New 2015. Weight 1200 Kgs Tjdpfjw A Sh Eex Adlef

Condition: used, Year of construction: 2023, AJAX AJPR350 CNC Milling Machine Table Size 600mm x 163mm, X Axis Travel 350mm, Y Axis Travel 160mm, Z Axis Travel 400mm, Rapid Traverse 5m/min, Main Motor Power 3kw, Tool Changer 12 Tools, Max Table Load 50kg, Machine Weight 900kg, CNC Control Siemens 808D, Motor Type AC Servo, Spindle Taper BT30, Spindle Speed 18,000rpm, Machine Working Hours – 200 hours. S/No. 41840 (2023) Tsdpfx Ajxzfvwedlsf Location: These lots are located in Newcastle upon Tyne, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2011, 450mm swing, 210mm max diameter, FANUC 0i Control, 51mm bar capacity, 12 station turret, 11/7.5kW Spindle Motor, Tjdpfxsxuhwqe Adljf 4,500 rpm, collet chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Manufacturer: EMCO Model: Emcoturn 45E Year of manufacture: 2018 Few operating hours Control: Siemens 828D Todpfxjw Rrvwe Adlof Number of tools: 12 driven units Max. speed: 0-6000 rpm

Condition: used, Year of construction: 2001, turning diameter 210 mm travel: . x-axis 215 mm z-axis 508 mm Number of tools in turret 10 Tedpsxwzhuefx Adljf In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, SCHAUBLIN 125 CCN is a CNC turning lathe of high precision, engineered for reliable machining with superior accuracy and repeatability. Working capacities: centre height 125 mm, distance between centres 500 mm, swing over cross-slide 115 mm, swing over bed 270 mm, spindle hole 28 mm; Z travel 400 mm, X travel 180 mm; spindle stroke 160 mm, spindle diameter 45 mm. Main specs: stepless spindle 0–5000 rpm, spindle power 7.5/5.5 kW, torque 58/42 Nm, Morse taper 3, feeds up to 5000 mm/min, rapid traverse 7.5 m/min; air 5–6 bar; 3x400 V 50 Hz; total power 15 kVA; weight ~1415 kg; dimensions 1700×1300×1700 mm. Accessories: 3-jaw chuck, soft/hard jaws, steady, set of collets, lamp, tailstock, coolant system, tool cabinet, steel holders, rinsing gun. Achieves tight tolerances; suitable for automotive, watchmaking, machine tools, aerospace, medical. Tedsxx Uzwjpfx Adlof

Condition: excellent (used), Year of construction: 1996, operating hours: 46,282 h, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, total height: 2,600 mm, total length: 11,000 mm, total width: 2,000 mm, overall weight: 6,000 kg, controller manufacturer: TRAUB, controller model: TX 8F, counter spindle speed (max.): 4,000 rpm, number of slots in tool magazine: 10, - Includes two 10-position tool turrets with driven tool stations - Includes HAINBUCH chuck system - Includes sub-spindle, bar feeder (manufacturer: STAMAG) - Includes chip conveyor TECHNICAL DATA: - Operating voltage: 400 V - Frequency: 50 Hz - Control voltage: 230 V - Rated current: 85 A - Connection: 54 kW - Connected load: 39 kW - Noise emission value at operator position: 71 dB(A) Ambient conditions: - Temperature: 5 – 40°C - Air humidity: max. 70% - Workpiece removal via sub-spindle - Max. sub-spindle speed: 4000 min-1 - Max. workpiece diameter: 56 mm - Programming: EIA and ISO code Input and output resolution: - X/Z: 0.001 mm - C axis: 0.001° - Rapid traverse: max. 15 m/min - Fine interpolation cycle: 0.34 ms - Largest thread pitch: 999.999 mm - Largest radius: 99,999.999 mm - Feed override: 0…200% - Rapid traverse override: 0…100% - Speed override: 50…120% - Speed input: 5 digits - Cutting speed input: 4 digits - Tool input: 4 digits - Program number: 8 digits - Subprogram number: 8 digits - Block number: 4 digits - M-functions: 3 digits - B-functions: 6 digits - Memory capacity: 32,000 characters - Tool correction pairs: 40 NUMERICALLY CONTROLLED TURNING AND POSITIONING UNIT (C AXIS): Main spindle: - Max. speed: 80 min-1 - Torque at 100% duty cycle: 100 Nm - Accuracy: +/- 3 min Sub-spindle: - Max. speed: 80 min-1 - Torque at 100% duty cycle: 30 Nm - Accuracy: +/- 3 min Tedpjwpa Rusfx Adljf TOOL CARRIER 1 & 2: - Driven tools per tool carrier: 10 (14) - Max. speed: 4000 (8000) - Power at 100% duty cycle: 1.5 kW - Power at 15% duty cycle: 4 kW - Torque at 15% duty cycle: 12.4 (4) Nm - Tool holder/tool carrier quantity: 10 (14) - Cylindrical shank as per DIN 69880: Ø 30 x 55 (25 x 48) mm - Chisel cross-section: 20 x 20 (16 x 16) mm - Chip-to-chip time (per VDI 2852): 1.2 s - Switching time one station: 0.6 s - Over 5 stations: 1.5 s SUB-SPINDLE (NUMERICALLY CONTROLLED IN Z DIRECTION): - Max. speed: 4000 min-1 - Max. clamping diameter: 65 mm - Three-phase motor steplessly programmable: 11 kW - Torque: 210 Nm - Feed force at 100% duty cycle: 6000 N - Feed travel: 520 mm - Ball screw operation: Ø 32 x 10 mm HYDRAULICS: - System pressure: 60 bar - Tank capacity: 150 l COOLANT LUBRICATION: - Per tool carrier: 1-stage centrifugal pump - Pump pressure: 5/12 bar - Tank capacity: - without chip conveyor: 300 l - with chip conveyor: 280 l NOTICE: Due to sporadic work, the operating hours may still change slightly.

Condition: used, Year of construction: 2000, turning diameter 230 mm turning length 630 mm Tsdpfoww Nf Rsx Adljf control FANUC Series OT 12-Fach

Condition: good (used), Year of construction: 2020, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, 3 jaw power chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor Todsxy Rt Sspfx Adljf

Condition: excellent (used), CNC cycle lathe Haas TL1 (Machine from training) Year of manufacture: 2010 Spindle hours approx. 500 Swing diameter over bed: 508 mm Swing diameter over cross slide: 279 mm Turning length: 762 mm Wedge bar chuck ROTA-S 200 (Prepared for hydraulic chuck with foot pedal) Tsdpfxoxwtqbo Adlsf Travel paths: X: 203 mm Z: 762 mm Rapid traverse X/Z: 11.4 m/min Drive power: 7.5 kW Torque: 146 Nm Spindle bore: 58 mm The machine comes from training and was only rarely used. Therefore, the low spindle hours. Very good condition and immediately ready for use.

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz Tjdpfx Aewz Rifsdlsf - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: used, Year of construction: 2011, turning diameter 200 mm control DMG weight of the machine ca. 5200 kg Tsdpfx Adoxuv Scjlef

Condition: used, Year of construction: 2013, turning length: 1,020 mm, turning diameter: 340 mm, spindle bore: 65 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 25 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,074 mm, total height: 2,487 mm, total length: 4,371 mm, total width: 2,536 mm, overall weight: 7,500 kg, CNC Control OSP P300L-R Turning diameter 340 mm Turning Length 1020 mm Spindle bore diameter 65 mm Spindle Speed 25 - 3.000 R/min Spindle motor 15/11 kW Movement X-axis 235 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1074 mm Tedpoxnmz Usfx Adljf Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Spindle speed driven tools 45 - 4500 R/min Number of driven tools 12 x Tool Taper VDI Bar feeder LNS Alpha SL 65S If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 11 [kW] - Spindle speeds : 50- 6.000 [rpm] - Max. bar diameter : 60 [mm] - Max. turning diameter : 430 [mm] - Max. diameter on bench : 580 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Z stroke : 390 [mm] - X stroke : 260 [mm] - Tool type : V12 POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 38 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.200 x 1.734 [mm] - Machine height : 1.839 [mm] - Machine weight : 3.400 [kg] MACHINE HOURS - Number of hours under power : 23.682 [h] - Number of working hours : 11.795 [h] - Number of spindle hours : 7.225 [h] EQUIPMENT - CNC : OKUMA OSP-P200 LA - Interface : Ethernet / RS232 / USB - Interactive programming : Advanced One Touch IGF-L V302A - 3 colors status lamp - Coolant tank Tedpfxoxz Hrgs Adlef - Chips conveyor : Droite MAYFRAN - Tool probe : manuel - Parts catcher - Bar loader : FMB 5-55 /3200 - Electric transformer - Collet chuck : Nann KSF 40/6 -6000 t/min - Collet chuck : TYPE 173E/48F Ø de barre max 42 mm

Condition: excellent (used), Year of construction: 2017, operating hours: 5,500 h, functionality: fully functional, turning diameter: 220 mm, spindle speed (max.): 6,300 rpm, torque: 78 Nm, overall weight: 4,000 kg, bar passage: 45 mm, bar diameter (max.): 45 mm, The CNC lathe is being sold including bar feeder and several tools. It is still in operation and can be inspected under power. The scope of delivery includes a 3-jaw chuck up to D160 mm and a collet chuck up to D45 mm for bar feeder operations. Bar capacity: 45 mm C-axis Max. turning diameter: 220 mm (a 160 mm chuck is included) Centre distance: 670 mm Max. spindle speed: 6,300 rpm Max. torque: 78 Nm Max. drive power: 13 kW 12 tool positions 6 driven tools Weight: 4,000 kg Dimensions (LxWxH) incl. bar feeder and chain conveyor: approx. 5,800 x 1,760 x 1,960 mm Tsdjxu Dg Iepfx Adlsf Tailstock BMF chain conveyor Bar feeder The machine was used almost exclusively for machining plastic parts and has therefore seen very little wear. All information provided without guarantee.

Condition: used, Year of construction: 2015, turning diameter 210 mm turning length 1000 mm control Fanuc 31i max. turning speeds 5.000 min/-1 drive capacity - main spindle 15 kW max. torque 476 Nm bar passage 65 mm x-axis 250 mm z-axis 1050 mm x2-axis 150 mm z2-axis 1030 mm spindle hours ca. 700 h accessories: Lünette, Späneförderer In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Tsdpfxoxq R Evj Adlef Technical details: - approx. 500 spindle hours Accessories: - Steady rest - Chip conveyor Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: excellent (used), Year of construction: 2004, MAZAK QUICK TURN NEXUS 200MS-Y Max. machining diameter: 380 mm Max. machining length: 511 mm Tsdpfx Adow Du S Aolef Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control Mazatrol 640T Nexus - KITAGAWA three-jaw chuck BB-208 for main spindle, diameter 210 mm - KITAGAWA three-jaw chuck B-206 for 2nd spindle, diameter 169 mm - Tool Eye - C-axis - Y-axis - Interface for bar feeder - Automatic parts catcher - Reinforced coolant pump - Chip conveyor - 8 fixed tool holders - 2 driven tool holders

Condition: used, Year of construction: 2007, turning diameter 246 mm turning length 445 mm control Fanuc 32 weight of the machine ca. 4250 kg Tsdpfx Adexuv R Sjljf

Condition: used, Year of construction: 2002, - Siemens 840D Sinumerik control system - Driven tools - 12 tool positions - Drag frame magazine 20 places - chip conveyor - Coolant system - Year of construction 2002 Technical data: - Rotation Ø: 235 mm - Z-axis (vertical): 250 mm - X-axis (horizontal): 450 mm + 370 mm - Workpiece height: 100 mm - Ø in front bearing: 90 mm Tjdpjrbltpjfx Adlef - Spindle head with short taper DIN 55026: A5 - Hollow shaft motor with oil circulation cooling: integrated in the headstock - Nominal power 100% ED: 29.3 kW - Nominal torque 100% ED: 200 Nm - Nominal speed: 1400 rpm - Maximum speed: 6500 rpm - Z-axis travel speed: max. 30 m/min - Traversing speed X-axis: max. 60 m/min Tool changer: - Number of switching positions: 16 - Permissible tangential torque (turret locked): 1300 Nm - Permissible mass moment of inertia of tool disk, tool holders and tools: 2.5 kgm² - Permissible unbalance (load torque) due to equipping with tool holders and tools: 32 Nm - Hydraulic operating pressure: 50 bar ± 10% - Weight of the turret: approx. 50 kg Dimensions - Dimensions WxHxD: 4400 x 2800 x 2600 mm - Machine weight: approx. 7000 kg