Used Cardboard Dishes for sale (1,176)

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Hodpfx Aeu Tg I Dscrel Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Hedpfx Asu Thpnjcrsl Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2024, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: Hodpfxsu Th D Rs Acrel 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Hjdsw U Dt Nopfx Acrel Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Used Packo approximately 35L stainless steel vertical reactor. Unit measures approximately 380mm diameter x 520mm straight side. Unit has a welded dished bottom and bolted flat top. Internal rated -1/6 bar maximum allowable working pressure. External stainless steel jacket rated 6 bar maxiumum allowable working pressure. Unit has bottom entry Novaseptic GMP 50 hygenic magnetic coupled mixer driven by a 0.25kW motor. Unit includes a local control panel. Mounted on a mobile stainless steel trolley. Weight: Estimated: Kg250.0 Hjdpeyw S S Tofx Acrol Dimensions: 850mm X 1050mm

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. Hjdpfsy Ex Nnsx Acrjl all stainless steel suitable for thermal oil heated 12,7 kW frying length 3.000 mm belt width 600 mm top hold down belt adjustable speed mechanical lid oil circulation pump oil level control suitable fire protection sediment removal system filter lifting unit with mechanical hoists total length ± 5.650 mm total width ± 1.800 mm total height ± 3.450 mm

Condition: used, Used FIB Industriele Bedrijuen BV approximately 106 litre stainless steel vertical mixing vessel. Unit has bolted flanged top and welded dished bottom. Unit measures approximately 400mm diameter x 400mm straight side. Internal rated 3 bar/full vacuum design pressure at 135 deg.c. Unit includes bottom entry stainless steel disc type agitator driven by Jongia model LEM30 drive with 1.5kw motor and Siemens gearbox rated 2.05/1 ratio. Unit is mounted in a stainless frame. Hjdpfx Acoyh Ncaerjl Specifications: Capacity: 28 gal Diameter: 1.31' Height: 1.31' Type of stainless: unspecified Type Of Heads: bolted flanged top and welded dished bottom Vertical/Horizontal: vertical Legs/Lugs/Skirt: mounted in a stainless frame Dimensions: 400mm x 400mm

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel electrically heated Hsdpfoy Edniex Acrol 72 kW heating capacity 75 kW total connected power net frying length : ± 3.000 mm net belt width : ± 500 mm in- and outfeed belt teflon infeed belt adjustable speed sediment removal system filter suitable for fire protection mechanical hoists dimensions (l x w x h) : ± 6.300 x 1.700 x 3.100 mm

Condition: used, This Krause C64-50 Autofeed Die Cutter is a powerful machine designed for precise and efficient die cutting work. With a maximum format of 600 x 500 mm, it offers the flexibility to handle a wide range of materials. The machine is currently located in the Netherlands and is standing still, which represents an ideal opportunity for those looking for a high-quality die cutting machine. Format: 600 x 500 mm Equipment: Krause autofeed die cutter Hjdpfx Ajvfx Uljcrjl Max. Size: 60 x 50 cm (23 x 19 inch)

Condition: good (used), Year of construction: 2015, type of input current: AC, input voltage: 400 V, Equipment: documentation/manual, Cheops Tray shrink packer Made By CHEOPS spol. s r.o. TERMOPAK 400TP – upto 400 Trays per hour Ability to pack tray+ film, Film only or pad+film For use with pop-lock or pre made trays – existing cardboard supplier details can be provided, along with existing cutters. Lifters and frames for the following formats : 200ml bottles – 24 pack 250ml bottles – 24 pack Hjdpfx Acox Dantorol 330ml bottles – 12/24 pack 500ml 1914 style tall bottles – 12 pack 750ml bottles – 12 pack Lifting heads for: 500ml stumpy bottles – 8/12 pack In use till end of January 2026 We used on glass but with different heads could pack PET / Cans. Selling as increased production capacity.

Year of construction: 2012, condition: refurbished (used), functionality: fully functional, machine/vehicle number: E22MH12032292920, This combi steamer from Rational is a CombiMaster® Plus with 20 x 2/1 GN shelves, electric version, manufactured in 2012. This is the XXL model, offering capacity for 20x 2/1GN or 40x 1/1GN trays. The unit has been completely overhauled in our in-house workshop and is fully functional. The combi steamer will be available from calendar week 20. Please note these are sample photos; actual images will follow shortly. The RRP for this combi steamer is €27,110 (net). Service: We are happy to assist you in connecting with certified Rational customer service throughout Germany. Looking for a specific type of Rational unit? Contact us – we have access to a large stock of used and new equipment. We are happy to advise you on all types of Rational equipment, whether SCC, CM, CMP, VCC, iVario, iCombi Classic or Pro. This unit is the perfect choice if you are looking for a classic combi steamer that you wish to operate manually. Our used equipment service for you: 6-month warranty on all electrical components, limited to replacement of defective parts, excluding assembly/disassembly costs Hodpfx Acsy H Et Nerol High-quality branded equipment at fair prices Professional refurbishment, inspection & expert cleaning Tested & fully functional – or your money back Shipping or collection available Expert advice – before and after purchase Provision of user manuals, wiring diagrams & spare parts DGUV V3 electrical safety inspection The CombiMaster® Plus from RATIONAL is robust and impresses with features that enable the highest food quality. It supports the chef’s craft with precisely controlled cooking chamber climate, as well as exact settings for temperature, humidity, airflow, and cooking duration. Technical data: Dimensions (W x D x H): approx. 1084 x 996 x 1782 mm Electrical connection: 400 V / 67.3 kW / 50-60 Hz Weight: approx. 334 kg Serial number: E22MH12032292920 Year of manufacture: 2012 Condition: Used, overhauled, and fully functional Additional information: Applications: Steam mode: 30°C to 130°C Hot air mode: 30°C to 300°C Combination mode: 30°C to 300°C Finishing®: Bring pre-prepared and chilled dishes to serving temperature in optimal conditions Automatic grease extraction for clean chamber air Semi-automatic cleaning program 5 air speed settings: Whether delicate or robust, the CombiMaster® Plus delivers the right airspeed for every type of food Double-glazed, ventilated door (hinged for easy cleaning) LED cooking chamber lighting Core temperature measurement via probe Cool-down function High-performance fresh steam generator (automatic flushing and draining) Hand shower with automatic retract Dynamic air circulation Shipping: Delivery or collection by arrangement Worldwide shipping on request Delivery to islands or mountain stations by arrangement only

Year of construction: 2017, condition: used, This listing is for a Rational SCC 61 WE combi-steamer in electric version from the premium manufacturer Rational, year of manufacture 2017. The combi-steamer is a device from the latest SCC series, featuring triple glazing and LED lighting. The unit has been completely overhauled in our in-house workshop and is fully operational. The pictured stand is not included in the offer but can be purchased separately as an option. List price: €9,400 net. You will receive an invoice with VAT shown separately. Service: We are happy to assist you in arranging service by an authorized Rational technician. Are you looking for a specific Rational model? Contact us—we have access to a wide selection of both used and new appliances. We are happy to advise you on all types of units, whether SCC, CM, CMP, VCC, iVario, or iCombi Classic and Pro. Our used equipment service for you: • 6-month warranty on all electrical parts, limited to replacement of faulty parts (excluding labor costs) • Quality branded equipment at fair prices • Professional refurbishment, inspection & expert cleaning • Tested & fully functional – or your money back • Flexible shipping or self-collection options • Competent advice before and after your purchase • Provision of operating manuals, wiring diagrams & spare parts • Inspection according to DGUV V3 requirements This combi-steamer accommodates up to 5 trays of 400 x 600 mm. In automatic mode, the unit independently identifies the optimal cooking path for 7 applications (meat, fish, poultry, side dishes, egg dishes, bakery products, and finishing), as well as product size, loading amount, and product-specific requirements. Technical specifications: • W x D x H: approx. 847 x 776 x 782 mm • Minimum door dimensions for delivery (W x H): 845 x 850 mm • Electrical connection: 400 V / 11 kW / 50/60 Hz • Capacity: 6 x 1/1GN • Weight: approx. 110 kg • Serial number: E61SI17082610110 • Year of manufacture: 2017 Condition: used, overhauled, fully functional Further features: • 3 operating modes in combi-steam mode: steam (30°C to 130 °C), convection (30°C to 300°C), and combination (30°C to 300°C) • Care Control – automatic cleaning • Core temperature probe • Hand shower with automatic retract • 8.5-inch color display and touchscreen • 5 programmable fan speeds • Integrated maintenance-free grease separation system • Automatic pre-selection of starting time • 7 cleaning levels for unattended cleaning – including overnight • Steam injection adjustable in 3 levels (30°C to 260°C) • 5 programmable proofing stages • USB interface • Seamless, pan-shaped hygienic cooking chamber with rounded corners • Halogen cooking chamber lighting Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only upon agreement Hodpfxsyxmmhs Acrol Subject to change and errors. Do you have questions, need advice, or would like to view the item on site? You can reach us by phone during our business hours: Monday–Friday 09:00 – 13:00 and 14:00 – 17:00. Sale subject exclusively to our general terms and conditions (AGB).

Condition: new, functionality: fully functional, Carton Erector Advanced 400 Fully Automatic Net Price: €24,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L145–400 mm (up to 650 mm on request) 2. Product width: W80–350 mm (up to 500 mm on request) 3. Product height: H150–350 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 48 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2450 x 1380 mm 10. Air consumption depends on packing speed Carton Erector Advanced 500 Fully Automatic Net Price: €27,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L275–500 mm (up to 650 mm on request) 2. Product width: W140–400 mm (up to 500 mm on request) 3. Product height: H140–400 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 58 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2850 x 2000 x 1400 mm 10. Air consumption depends on packing speed Carton Erector Advanced 650 Fully Automatic Net Price: €29,900 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Hodoya Dh Dopfx Acrol Technical Specifications: 1. Product length: L285–650 mm 2. Product width: W280–500 mm 3. Product height: H150–500 mm 4. Packing speed: 5–25 cartons/min 5. Maximum tape width: max 75 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.35 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2920 x 2100 x 1500 mm 10. Air consumption depends on packing speed

Year of construction: 2011, condition: used, functionality: fully functional, This listing features a Rational CMP 101 combi-steamer from the premium manufacturer Rational, in electric configuration. The unit has undergone a comprehensive inspection in our in-house workshop and is fully operational. The device is offered with a 6-month warranty covering all electrical components. Please note: The base stand shown in the pictures is not included in the scope of delivery but can be purchased as an optional extra. The images provided are actual photos of the unit. Hedex Tfgvepfx Acrel RRP: €9,380 net. You will receive an invoice with itemized VAT. Service: We are happy to assist you in arranging a certified Rational customer service partner. Looking for a specific Rational model? Contact us—our extensive range includes both new and used equipment. We are happy to advise you on any model. This unit is the ideal choice if you are looking for a classic combi-steamer with manual controls. Our used equipment service includes: • 6-month warranty on all electrical components, limited to replacement of defective parts, excluding labor for fitting and removal • High-quality branded equipment at fair prices • Professional refurbishment / inspection & expert cleaning • Inspected & fully functional – or your money back • Flexible shipping or collection options • Competent advice – before and after purchase • Provision of operating manuals, wiring diagrams & spare parts • Electrical safety inspection according to DGUV V3 Technical data: • Dimensions (W x D x H): approx. 847 x 776 x 1042 mm • Minimum door opening for delivery (W x H): 845 x 1050 mm • Power connection: 400 V / Power: 18.6 kW / 50-60 Hz • Capacity: 10 x 1/1 GN • Weight: approx. 132 kg • Serial number: E11MH11122284737 • Year of manufacture: 2011 Condition: Used, major inspection performed, fully functional Additional features: Operating modes: • Steam mode: 30°C to 130°C • Hot air mode: 30°C to 300°C • Combination mode: 30°C to 300°C • Finishing®: Bring prepped and chilled dishes to serving temperature under optimal conditions • Automatic grease separation for cleaner cooking chamber air • Manual cleaning program • 5 air speeds: The CombiMaster® Plus offers the ideal airflow for any type of dish—gentle or robust • Double-glazed, ventilated doors (swing-out for easier cleaning) • LED cooking chamber lighting • Core temperature monitoring via probe • Cool-down function • High-performance fresh steam generator (automatic rinsing and draining) • Retractable hand shower • Dynamic air circulation Subject to change and errors. If you have questions, need advice, or wish to arrange a viewing, please contact us during business hours: Monday to Friday 09:00–13:00 and 14:00–17:00. Sale is subject exclusively to our general terms and conditions (GTC).

Year of construction: 2017, condition: used, functionality: fully functional, This is a Rational CMP 101 combi-steamer from the premium manufacturer Rational, electric version. The unit has undergone a fresh inspection in our in-house workshop and is fully functional. The base frame shown in the pictures is not included in this offer but can be purchased as an optional extra. The RRP is €10,390.00 net. You will receive an invoice with VAT shown separately. Service: We are happy to assist you in finding a certified Rational customer service provider anywhere in Germany. Looking for a specific Rational device type? Contact us—we have access to an extensive range of used and new equipment. We provide expert advice on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. This unit is the optimal choice if you are looking for a classic combi-steamer that you want to operate manually. Our used equipment service for you: - 6-month warranty on electrical parts, limited to replacement of defective parts (excluding removal and installation costs) - High-quality brand-name devices at fair prices - Professional refurbishment / inspection & expert cleaning - Tested & fully functional—or your money back - Flexible shipping or self-collection options - Competent advice—before and after purchase - Provision of manuals, wiring diagrams, and spare parts - DGUV V3 electrical safety inspection The CombiMaster® Plus from RATIONAL is robust and excels with its functions that ensure top food quality. It supports the chef’s individual craftsmanship by providing precisely controlled cooking chamber climate, as well as precise settings for temperature, humidity, airflow, and cooking time. Technical data: Dimensions (W x D x H): approx. 847 x 776 x 1042 mm Minimum door opening for transport W x H: 845 x 1050 mm Electrical connection: 400 V / Power: 18.6 kW / 50–60 Hz Capacity: 10 x 1/1 GN Weight: approx. 132 kg Serial number: E11MH17032576517 Year of construction: 2017 Condition: used, inspected, fully functional Further details: - Steam mode: from 30°C to 130°C - Hot air mode: from 30°C to 300°C - Combi mode: from 30°C to 300°C - Finishing®: brings pre-prepared and cooled dishes to serving temperature at the optimal climate - Automatic fat separation for clean cooking chamber air - Manual cleaning program - 5 air speeds: whether delicate or robust—CombiMaster® Plus has the right airflow for every dish - Double-glazed, ventilated door (swiveling for easy cleaning) - LED cooking chamber lighting - Core temperature sensor - Cool-down function - High-performance fresh steam generator (automatic rinsing and draining) - Hand shower with automatic retract - Dynamic air circulation Hsdsyvf Abjpfx Acrel Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to modifications and errors. Do you have questions, need advice, or would like to view the item on site? You can reach us by phone during our business hours: Monday–Friday, 09:00–13:00 and 14:00–17:00. Sales are made exclusively according to our general terms and conditions (GTC).

Year of construction: 2017, condition: used, This Rational combi-steamer is a CombiMaster® Plus with 8 x 1/1 GN slots in electric version, allowing you to load each rack position with deep GN containers. (The unit can also be retrofitted for use with a 10-level support rack.) This combi-steamer was mainly used for reheating packaged foods and is therefore in excellent used condition. The unit was manufactured in 2017. The device has been inspected in our in-house workshop and is fully functional. The stand shown in the photos is not included in the offer but can be purchased as an option. You will receive an invoice with VAT stated separately. Our used equipment service for you: - 6 months warranty on electrical parts, limited to replacement of defective parts (does not include installation/removal costs) Hjdpfx Aoyf Db Iocrel - High-quality branded equipment at fair prices - Professional overhaul/inspection & expert cleaning - Tested and fully functional – or your money back - Flexible shipping or self-collection available - Competent advice before and after purchase - Provision of operating manuals, wiring diagrams, & spare parts - Safety inspection according to DGUV V3 with certification label The CombiMaster® Plus by RATIONAL is robust and impresses with features that ensure top food quality. It supports the chef’s individual craftsmanship through precisely controlled cooking chamber climate, as well as accurate adjustment of temperature, humidity, air flow, and cooking duration. Technical specifications: Dimensions (W x D x H): approx. 847 x 776 x 1042 mm Minimum doorway clearance for transport (W x H): 845 x 1050 mm Capacity: 8 x 1/1 GN Electrical connection: Voltage: 400V / Power: 18.6 kW / Frequency: 50-60 Hz Weight: approx. 143 kg Serial number: E11MI17112631674 Year of manufacture: 2017 Condition: used, inspected, fully functional Further details: Possible operating modes: - Steam mode: 30°C to 130°C - Hot air mode: 30°C to 300°C - Combination mode: 30°C to 300°C - Finishing®: bringing pre-prepared and chilled dishes to serving temperature in an optimal climate - Automatic grease separation for clean cooking chamber air - Manual cleaning program (see photos) - 5 fan speeds: whether for delicate or robust dishes, the CombiMaster® Plus has the right air speed for every product - Rear-ventilated double glazing (swiveling for easier cleaning) - LED chamber lighting - Core temperature probe - Cool-down function - High-performance fresh steam generator (automatic rinsing and draining) - Hand shower with automatic retraction - Dynamic air circulation Shipping: - Delivery or self-collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by special arrangement Subject to change and errors excepted. Do you have questions, need advice or would like to view something on site? You can reach us by phone during our business hours: Monday to Friday, 09:00 - 13:00 and 14:00 - 17:00. Sale subject exclusively to our general terms and conditions (AGB).

Year of construction: 2018, condition: used, functionality: fully functional, This Rational combi-steamer is a CombiMaster® Plus with 5 x 1/1 gastronorm slots, electric version, allowing you to equip each slot with deeper GN containers. (It can also be converted to a 6-slot rack setup.) This combi-steamer was mainly used for reheating pre-packaged food, so it remains in very well-maintained used condition. The unit is from 2018. It has been inspected and serviced in our in-house workshop and is fully functional. The stand shown in the images is not included in the offer but can be purchased separately. A VAT-invoice will be provided. Service: We are happy to assist you in finding a certified Rational customer service provider throughout Germany. This unit is the optimal choice if you are looking for a classic combi-steamer that you can operate manually. Our used equipment service for you: - 6 months warranty on electrical parts, limited to the replacement of defective parts (excludes labor costs) - Quality branded equipment at fair prices - Professional refurbishment/inspection and thorough cleaning - Tested & fully functional – or your money back - Flexible options for shipping or self-collection - Expert advice before and after purchase - Provision of user manuals, installation diagrams, and spare parts - Safety test according to DGUV V3 The CombiMaster® by RATIONAL is robust and impresses with its features, enabling the highest food quality. It supports the chef’s craftsmanship by precise control of the cooking chamber climate as well as accurate adjustment of temperature, humidity, airflow, and cooking time. Technical Data: - Dimensions (W x D x H): approx. 847 x 776 x 782 mm - Minimum doorway size for transport (W x H): 845 x 850 mm - Power supply: 400 V / 11.0 kW / 50-60 Hz - Capacity: 5 x 1/1 GN - Weight: approx. 103 kg - Serial No.: E61MI18072680070 - Year of manufacture: 2018 Hsdpfx Aeyw Ifiocrel Condition: used, inspected, fully functional Further details: Applications: - Steam mode: 30°C to 130°C - Hot air mode: 30°C to 300°C - Combination mode: 30°C to 300°C - Finishing®: bring pre-prepared and cooled dishes to serving temperature in optimal climate - Automatic grease separation for clean chamber air - Manual cleaning program - 5 air speeds: whether delicate or robust, the CombiMaster® Plus has the right air speed for any product - Vented double glazing (pivoting for easy cleaning) - Core temperature probe - Cool-down function - Manual self-cleaning - High-performance fresh steam generator (automatic rinsing and draining) - Hand shower with automatic retraction - Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping available on request Shipping to islands or mountain stations by arrangement only Modifications and errors excepted Do you have questions, need advice, or want to view the equipment on site? You can reach us by phone during our business hours: Monday to Friday, 9:00 – 13:00 and 14:00 – 17:00. Sale is exclusively subject to our general terms and conditions (GTC).

Year of construction: 2017, condition: used, functionality: fully functional, This listing is for an SCC 61 WE combi-steamer in electric version by the premium manufacturer Rational, year of construction 2017. The combi-steamer is a device from the latest SCC series featuring triple glazing and LED lighting. The unit has been inspected in our in-house workshop and is fully operational. The stand shown in the photos is not included in the offer but can be purchased optionally. The RRP is €9,400 net. You will receive an invoice with VAT shown separately. Service: We are happy to assist you in arranging a certified Rational customer service provider. Looking for a specific Rational device model? Contact us—we have access to a wide range of used and new equipment. We are happy to advise you on all model types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic or Pro. Our used equipment service for you: - 6 months warranty on all electrical parts, limited to replacement of defective components, excluding labor costs for removal and installation - High-quality branded equipment at fair prices - Professional refurbishment/inspection & expert cleaning - Inspected & fully functional – or your money back - Flexible options for shipping or self-collection - Competent advice—before and after purchase - Provision of user manuals, wiring diagrams & spare parts - DGUV V3 inspection This combi-steamer accommodates 5x 400x600 mm baking trays. In automatic mode, the device independently detects the ideal cooking path, the size of the load, quantity loaded, and product-specific requirements for 7 applications (meat, fish, poultry, sides, egg dishes, baked goods, and finishing). Technical data: W x D x H: approx. 847 x 776 x 782 mm Minimum door opening for transport W x H: 845 x 850 mm Electrical connection: V: 400 / kW: 11 / Hz: 50/60 Capacity: 6 x 1/1 GN Weight: approx. 110 kg Serial number: E61SI17082609969 Year: 2017 Condition: used, inspected, fully functional Further details: - Three operating modes in combi-steam mode: Steam (30°C to 130°C), Hot air (30°C to 300°C), Combination (30°C to 300°C) - Care Control – self-cleaning - Core temperature probe - Hand shower with automatic retract - 8.5-inch color display and touchscreen - 5 programmable fan speeds - Integrated, maintenance-free fat separator - Automatic start time preselection - 7 cleaning stages for unattended cleaning—even overnight - Humidification adjustable in 3 levels from 30°C to 260°C - 5 programmable proofing stages - USB interface - Seamless, tray-shaped hygienic cooking chamber with rounded corners - Halogen cooking chamber lighting Shipping: Hodpfxeyxmxds Acrel Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain locations only by arrangement Subject to change and errors. If you have questions, need advice, or would like to view an item on site, you can reach us by phone during our business hours: Monday–Friday 09:00–13:00 and 14:00–17:00. Sale is exclusively under our general terms and conditions (GTC).

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 58900538, input voltage: 380 V, total width: 1,200 mm, total height: 2,300 mm, overall weight: 470 kg, total length: 850 mm, filling opening width: 830 mm, bale width: 830 mm, bale length: 600 mm, bale height: 650 mm, opening width: 830 mm, transport height: 2,300 mm, Machine fully functional, but the press plate is deformed and needs to be straightened (see photo). The machine is sold together with strapping bands for bundling the bales and a sack truck for transporting the bales. Pick-up only, no delivery and no warranty. Hsdjy Hlg Nepfx Acrel

Condition: good (used), Year of construction: 2008, ErgoTronic Consol with Colortronic: consolle for the remote adjustment of ink fountains and registers QualiTronic Color Control DensiTronic Professional: Quality Control with Spectrometer Logotronic with CIPLink X Lithec Litho Flash: ink Control Device Watercooled Press Non Stop Feeder & Delivery CX Version: Board Equipment (60-600gr/m2) Cardboard Device: 1,2mm Thin Thickness Printing Package 40-80g/m2 Antistatic Device on Feeder (Eltex) SIS sensoric infeed system Hedpfx Acoy Hl Awjrjl ACS Air-Cleaning-System FAPC: Full Automatic Plate Change Antistatic Device on Delivery (Eltex) Automatic Washing Devices Weko AP 262: Powder Sprayer Coating Unit: Chambered Ductor System Harris & Bruno Extended Delivery 2400mm (ALV2) IR-/TL-Dryer VariDry & ALV2 Double Sheet Control - electronic Chromed Impression Cylinder Baldwin Cooling Varidamp Dampening System Impression Account: 295 Mio

Condition: refurbished (used), functionality: fully functional, The Boxlift 6430-6 depot system is for sale with a new control unit from Siemens, a SIMATIC HMI. Here are just a few key data: Hodewqpwmjpfx Acrel L: 1600 mm W: 850 mm H: 2100 mm - Base frame made from aluminum profiles with 6 inserts for cardboard boxes or poly boxes - Floor plates made of stainless steel - Parts transfer slides - Festo pneumatic system installed

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-1A, The VOGEL MH-FJ-1A carton sealing machine has a side drive belt system and an additional drive belt in the upper section of the machine. The advantage lies in the stability - high cartons cannot tip to the side. Carton formats: Length 150 - ∞ mm Width: 120 - 480 mm Height: 120 - 480 mm Technical data: Length 1,090 mm Width 1,050 mm Weight 200 kg Operating voltage 220 V CE marking Hodpoy Drplefx Acrol Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-1AW, The VOGEL MH-FJ-1AW carton sealing machine has a side drive belt system. Including leading and trailing table. Carton formats: Length 150 - ∞ mm Width: 100 - 480 mm Hsdpfx Acjy Drnzsrol Height: 120 - 480 mm Technical data: Length 1,090 mm Width 890 mm Weight 180 kg Operating voltage 220 V CE marking Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-3A, The VOGEL MH-FJ-3A carton sealing machine is equipped with a lid sealing mechanism, i.e. the cartons can be fed in an open state. The short and long lid parts of the carton are closed first, only then is the carton glued. Carton formats: Hodpfx Acsy Drnuorjl Length 150 - 600 mm Width: 115 - 490 mm Height: 110 - 510 mm Technical data: Length 1,800 mm Width 880 mm Weight 300 kg Operating voltage 220 V Air 5 kg/cm2 CE marking IMPORTANT: An air pressure supply is required to operate the machine, which is not included in the scope of delivery. Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-1AWS, The VOGEL MH-FJ-1AWS carton sealing machine has a side drive belt system. The machine is specially designed for cartons in smaller formats. Carton formats: Length 160 - ∞ mm Width: 90 - 320 mm Height: 60 - 280 mm Technical data: Length 1,090 mm Width 890 mm Weight 85 kg Hjdpfx Acoy Drnnersl Operating voltage 220 V CE marking Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.