Used Carousel for sale (181)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, overall weight: 1,100 kg, REF: MM6469 Complete tube filling and sealing system, comprising of the following equipment: 1 x Axomatic rotary tube filler and sealer. Manufacturer - Axomatic Srl. Type - AXO 1000 MATIC. Date of manufacture – 2019. Speed - 60 to 90 tubes/minute. Fitted with loading hopper, tube selector, detector for missing tubes on the carousel, filler, seal with code in seal, crimper (at top for waste) and exit chute. Supplied with Eurocold glycol chiller, pump, pipework and 2 x pallets of tubes. This unit has had all air pipes replaced. Fsdpfx Aozp E Sbjanopp Previously used and set up for icing frosting tubes but the weight and tube size is variable (10g to 120g). Electrical requirements - 3 phase. Maximum air pressure - 8 Bar. Dimensions of AXO 1000 MATIC tube filling system - 2300mm long x 1400mm wide x 2350mm high. Weight of of AXO 1000 MATIC tube filling system - 1100 kg.

Year of construction: 2016, condition: used, IRS Performance Test Carousel (2016), Cycle Time 60 mins, 118 Stations, Wifi Test, Vahle KSL 5/200 Hs Power Rail Fpsdpfxsz I Scbj Aanop Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Year of construction: 2010, condition: good (used), Ref. -No.: 10322 Manufacturer: EKO PILL Type: PMPO 950 K Year of construction: 2010 Fpjdpfo Ahmulox Aanop Further information: The PMO 950K carousel jet washer is revolutionary maintenance-free washer, extremely compact and aesthetic structure, designed for oil contamination, machining emulsions and loose chips from washed objects. Despite its minimized dimensions, it works perfectly together with automated production lines for thorough washing, and optional rinsing and drying of moving parts on the internal conveyor. Short distance between station Loading and unloading facilities make it flexible. Washing, rinsing as well as drying operations take place in closed circuits, which significantly reduces costs - Gravity oil separator OGP - Fine filter EKO-PIL 20 µm - Vapor condenser with liquid regeneration - Drying heat recovery - Washing - Rinsing / Maintenance - Drying

Condition: used, Year of construction: 2013, Offered is a roll storage carousel with electric drive. Total load capacity: 6500kg, load capacity per carrier: 300kg, height/width: 5300mm/3000mm, control: up/down buttons, roll supports, side-mounted circulating chain. Inspection possible by arrangement. Fpodj Ai Tzyopfx Aansp

Condition: used, This MEGAMAT automated storage and retrieval system, type 140-300-34 (3-module), is being auctioned off in our online industrial auction / machine auction as part of the site closure of a well-known toy manufacturer – including overhead cranes, machine accessories, storage racks, and lockers – STEP 4. You can find this and many other items on our platform. Fjdpfx Aao Airp Renjpp

Condition: used, Year of construction: 2013, Offered is a roll storage carousel with electric drive. Total load capacity: 4500kg, load capacity per carrier: 250kg, height/width: 4900mm/3000mm, control: up/down buttons, roll supports, main switch, key switch. Inspection possible by arrangement. Fpedpfe Ai Tz Dsx Aansp

Condition: used, Year of construction: 2013, Offered is a roll storage carousel with electric drive. Total load capacity: 7500kg, load capacity per carrier: 350kg, height/width: 5450mm/3000mm, control: up/down buttons, roll supports, main switch, key switch. Inspection possible by arrangement. Fjdpfxo Ai Tzvo Aanjpp

Condition: excellent (used), Year of construction: 2024, x-travel 750 mm y-travel 600 mm z-travel 520 mm B-axis (table) - 10°/+95° Grad c-axis 360° Grad table surface area Ø 800 x 620 mm control Heidenhain TNC 620 spindle turning speed - stepless 20 - 15.000 U/min power capacity - milling spindle 20 / 14,5 kW max. torque on the milling spindle 121 / 84 Nm rapid traverse 30 m/min tool change unit 60 Werkzeuge tool taper SK40 table load 350 max. kg total power requirement 35 kVA weight of the machine ca. 11 t Fsdpfx Aae Ai Ucaonepp dimensions of the machine ca. 6,5 x 4,5x 3,0 m Five-sided machining center with ROBO2GO Milling robot in excellent condition. The ideal machine for minimally staffed shifts, right down to single-part production! (Can also be used as a stand-alone machine) The machine has only 2,850 spindle hours and is equipped as follows: * Heidenhain TNC 620 3D control with 19" screen * electronic handwheel * direct position measurement system (X, Y, Z) * Universal milling head with controlled B-axis * SK40 motor spindle, 15,000 rpm, 20 kW * Tool magazine (carousel), 60 positions * HEIDENHAIN TS 460 touch probe for workpiece measurement with optical signal transmission * Tool measurement in the work area: Blum Laser NT-Hybrid * BLUM laser probe for measuring tool length and diameter * Pneumatic control system for the clamping device, mounted on the machine table * SCHUNK KSP plus 160 pneumatic vise * Blowing air can be activated through the center of the spindle * Electronic handwheel * through the spindle coolant (40 bar) with paper-tape filter system * Chip conveyor _____ * Flexible workpiece loading and unloading system with a 6-axis industrial robot - Interchangeable workpiece magazine, including workpiece trays - Max. 42 parts up to 100 x 100 mm - Max. 9 parts up to 200 x 200 mm - Max. tray load: 700 kg - Max. robot payload: 25 kg * 2-jaw gripper for rectangular workpieces - Gripping range with jaw adjustment system: 20–195 mm - Min. workpiece height: 20 mm - Gripper stroke: 6 mm per jaw * Drawer storage: - For increased capacity and loading/unloading of workpieces during active production time Includes 15 touchscreen - Each drawer can be loaded with different jobs via the software - Number of drawers: 3 (+ 2 optional) - Max. workpiece height with 3 drawers: 250 mm - Max. workpiece height with 5 drawers: 100 mm - Max. load per drawer: 300 kg - Includes safety fence with light curtain - Inlay for up to 22 parts, up to 100 x 100 mm, for drawer storage The machine can be inspected under power!

Condition: good (used), Year of construction: 2006, functionality: limited functionality, 6-colour automatic screen printing machine, in good condition, little used. The machine has been dismantled due to lack of space. Fodoyv Uunepfx Aanopp

Condition: used, Year of construction: 2019, Base frame, carousel and swing arm of a Kuka KR 360 R2830 industrial robot with: - Axis 2 motor: Siemens 1FK7105-5AY81-1YY3-Z Fpedpox A D Rcjfx Aansp - Counterbalance GA16

Condition: used, Year of construction: 2008, Offered for sale is a carousel screen printing press with 12 pallet stations. Technical specifications: Printing pallets: 12, pallet dimensions X/Y: 430mm/700mm - 12 pieces, pallet dimensions X/Y: 320mm/700mm - 12 pieces, arm pallets for rotation X/Y: 150mm/810mm or 100mm/810mm - 12 pieces. Control system: Control panels with digital displays and control buttons. Equipped with pivoting printing arms, pallet supports and perimeter safety barrier. Inspection possible by arrangement. Fjdpsz N E U Uofx Aanjpp

Condition: like new (used), Year of construction: 2021, We now have a Vertical Carousel from 2021 available for sale. The machine is in very good condition and has been serviced annually by the manufacturer since installation. The Vertical Carousel has a total height of 6,435 mm, making it suitable for many different types of storage and operations. It has a carrier width of 3,050 mm and a depth of only 428 mm. With 30 carriers, the machine provides a total of 39.2 m² of effective storage space. One of the main advantages of this machine is its space-saving design. It only requires approximately 4.7 m² of floor space, making it an excellent solution for companies that want to increase their storage capacity without needing more floor space. The machine also has very low operating hours, indicating that it has been used very little. It has always been kept in a clean and well-maintained environment. Technical information: Model year: 2021 Fsdpfoz Aphajx Aanepp Model: MEG.RS.350.1.3050.4.381.30 Machine height: 6,435 mm Machine width: 3,675 mm Machine depth: 1,271 mm Number of carriers: 30 Maximum carrier height: 320 Carrier width: 3050 Carrier depth: 428 Electronics: 3/N/PE 400V, 16A

Condition: used, Year of construction: 2017, Used Dugard 1000 Y Plus Machining Centre in fitted with Heidenhain TNC 640 control, Through spindle coolant, 4th Axis unit wiring , Swarf conveyor and 30 station ATC. The machine is in the Bristol showroom ready for a powered Demonstration. X Axis Travel - 1000mm Y Axis Travel - 610mm Z Axis Travel - 610mm table size of 1200mm x 510mm Control Heidenhain TNC 640 30 Station Tool Carousel BT40 Big Plus Spindle 12,000 RPM Through spindle coolant 4th axis ready Swarf conveyor Control: Heidenhain TNC 640 Fpedpfx Aasw Nkctonep Spec: X1000 Y610 Z610 mm | 12000RPM | BT40 Accessories: Through spindle coolant, 4th Axis unit wiring , Swarf conveyor and 30 station ATC. Name of the machine: Dugard 1000 Y

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system 3 identical paternosters are available External dimensions: Height 6500 mm Width 3670 mm Depth 1560 mm 46 supports with a payload of 305 kg each In the clear usable dimensions: H = 210 mm W = 3050 mm D = 520 mm Chain pitch 254 mm Additionally available: 46 intermediate shelves for halving the usable height Total payload up to 14200 kg Storage table at 1000 mm above floor level with stainless steel worktop Color: GRAY / DARK GRAY, surface cleaned, signs of wear possible Drive motor power: 1 x 5.5 kW / 400 volts Fodsrw A Eispfx Aanopp Subject to errors and technical changes. Details may vary from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: ready for operation (used), A filling machine Ammann used in the dairy industry is available. Cup diameter: 95mm, cup height: 122mm. Including filling heads and various accessories. Documentation available. An on-site inspection is possible. Fedpfxoxuvpze Aanopp

Condition: excellent (used), Year of construction: 1987, Carousel lathe SCHIESS FRORIEP - DV DF DZ DKE Fedpfx Aajzc H Uxenjpp 1 x set off 4 jaws 410 x 330 x 200 mm MACH-ID 6693 Make: SCHIESS FRORIEP Type: DV DF DZ DKE Year: 1987 set off 4 heavy duty jaws for SCHIESS FRORIEP DV DF DZ DKE Jaw width 90 mm Jaw height 75 mm Hole to hole jump length ways 125 mm Hole to hole jump in width 250 mm Length:1200mm Width:800mm Height:400mm Weight:500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 00-291-556, Original KUKA smartPAD-2 industrial programming console (Ref. 00-291-556), compatible with KUKA KR C4 and KR C5 controller cabinets. Second-hand unit in excellent cosmetic condition and fully functional. Other components and spare parts, such as servomotors and gearboxes, are available upon request. Fpsdpfx Aao Ah Elcjnop KUKA 00-311-132 / 311132 AC Servomotor ME_180_190_30_L0 (Axis 1) – 3.8 kW KUKA 00-311-114 / 311114 AC Servomotor ME_260_190_30_L0 (Axis 2) – 5.5 kW KUKA 00-308-802 / Nabtesco RV-100N-65.34 Gearbox Reducer (Axis 5 / A5) KUKA QUANTEC Robot Base / Rotating Carousel Assembly with 00-310-641 Machine Mounting Kit Original KUKA smartPAD-2 industrial teach pendant (Part No. 00-291-556), compatible with KUKA KR C4 and KR C5 control cabinets. Pre-owned unit in excellent cosmetic condition and fully operational. Additional spare parts, such as servomotors and reducers, are also available upon request.

Condition: reconditioned (used), Haas VF-4 CNC Vertical Machining Centre (2015) Haas CNC control X-axis travel: 1,270 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Table size: 1,321 × 457 mm Maximum table load: 1,588 kg Standard spindle speed: 8,100 rpm Maximum spindle power: 22.4 kW / 30 hp Spindle taper: 40 taper Automatic tool changer: 20-station carousel Rapid traverse rates: 25.4 m/min Spindle nose to table: 102–737 mm Supplied With: Haas rotary 4th-axis unit with three-jaw chuck, Matching Haas tailstock, Swarf auger and discharge chute, Remote jog handwheel, Coolant system, External tool storage racks and assorted tooling. Fsdpfx Aaj Agn Dvonjpp For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79299 Machine Serial Number: 1124936 Cost: £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2012, Haas VF-2SSYT Year of manufacture: 2012 Spindle speed: 12,000 RPM CT40 taper Fpodpfx Aaez Ihc Rsnjp Tool Set Carousel (TSC) Workpiece Probe System (WPS) Renishaw probing system 4th axis, wired Video available!

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1000466, For sale is a professional direct injection molding machine from leading manufacturer DESMA, model S712. This machine is ideally suited for the efficient series production of footwear with directly molded soles (direct injection molding). Areas of application & uses: Ideal for TPU - 200T clamping force Footwear industry: Production of safety shoes, work shoes, hiking boots, as well as leisure and shaft boots. Materials: Processing of polyurethane (PU), TPU, or PU combinations for sole production. Process: Direct injection molding of the sole material onto the upper. Equipment & features: Type / design: DESMA S712 rotary table machine / carousel machine with multiple stations. Molding head: Precision mixing head for accurate material metering and clean mixing. Control: Ergonomic control panel for central control of temperature, injection volume, and cycle times. Hydraulics & pneumatics: Robust clamping units for even pressure and burr-free sole edges. Safety: Integrated safety guards and light curtains according to industrial standards. Technical data (standard configuration): Manufacturer: DESMA Schuhmaschinen GmbH Model: S712 2003 expansion to 8 stations Application: Direct injection molding / sole injection molding Fpodpfjz H Ibwjx Aanop Processable media: PU systems (polyol / isocyanate) Condition: Used, from current/former production

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 327.112, total height: 4,910 mm, total width: 3,270 mm, total length: 1,155 mm, load capacity per storage section: 127 kg, construction height: 4,910 mm, construction width: 3,270 mm, type of input current: three-phase, input voltage: 400 V, empty load weight: 2,972 kg, input frequency: 50 Hz, input current: 7 A, Hänel Rotomat 900 vertical carousel storage system, year 2010, in working order and currently in use. Removed only due to warehouse relocation. Ideal for high-density storage of small parts, jewellery, components, engineering stock, pharmaceuticals, archive items and order-picking applications. Manufacturer: Hänel Model: Rotomat 900 Year: 2010 Specification: 22 carriers Max load per carrier: 127 kg Max total load: 2,794 kg Carrier size: 2,838 mm wide x 416 mm deep Machine dimensions: 4,910 mm high x 3,270 mm wide x 1,155 mm deep Stainless work surface 400V 3-phase supply MP12N-S-TFT control system Ethernet / webserver / barcode interface Condition: Machine is powered and can be seen operating Clean, well-kept unit from a jewellery business environment Sold only because of warehouse move Sale terms: Viewing available by appointment Buyer responsible for disconnection, dismantling, loading and transport Fpodpfx Aaoyu Rrxsnop Further photos / video of operation available on request

Condition: used, Year of construction: 2000, KOSME Extra Fix 16T rotary labelling machine for labelling bottles or other oval containers. Manufacturer: KOSME Model: Extra FIX 16T 1056 |S3 E2 + SL Year of manufacture: 2000 Capacity: up to 9,000 bottles/h Carousel: 16 stations Equipped with three cold glue labelling heads (front, back, and neck) Original electrical documentation. Fodpfx Ajywchljanopp Technical condition: used machine, condition as shown in the photos.

Condition: good (used), operating hours: 20,080 h, functionality: fully functional, machine/vehicle number: Kf262 622 E35, overall weight: 720 kg, load capacity: 12 kg, arm reach: 2,665 mm, pivoting range: 300 °, Equipment: documentation/manual, Complete automated glazing and handling solution For sale is an automated robot glazing cell with a Kawasaki 6-axis glazing robot, a Yaskawa handling robot, a CeramDetect 3.0 workpiece recognition system, a base cleaning machine, and a feeding and transport system. System overview: - Complete automated robot glazing cell for ceramic sanitaryware - Automated material flow from the feed conveyor, via workpiece recognition and carousel, to the glazing, base processing, and transfer to the transport system - Designed for different sanitaryware models - Sold as a complete process solution with robotics, recognition, and handling Glazing robot: - Manufacturer: Kawasaki Robotics. Type: KF262, 6-axis industrial robot, used for automated glazing/coating of sanitaryware Handling/transfer robot: - Manufacturer: Yaskawa Europe GmbH - Series: Motoman ES165D - Robot type: YR-ES0165D-B00 - Controller: Yaskawa DX100 - Date according to nameplate: 03.10.2013 - Power supply: 3-phase, 400 / 415 / 440 V, 50 / 60 Hz - Average power: 5.0 kVA - Full load current: 14.4 A - CE marking present - Function: automated transfer between carousel, base cleaning station, and transport system Workpiece recognition – CeramDetect 3.0: - CeramDetect 3.0 for automatic workpiece and position recognition - CeramDetect laser module and camera - Recognition in the area of the transfer from the feed conveyor to the carousel - The existing CeramDetect software is offered together with the system Base cleaning machine: - Automated base cleaning machine as part of the robot cell - Transfer and removal are carried out by the Yaskawa handling robot Other system components: - Feed conveyor for workpiece feeding - Automated transfer device from the feed conveyor to the carousel - Carousel for positioning and transferring the workpieces - Transport system for receiving the finished workpieces - Protective and safety devices - Control and electrical components of the entire system Material flow: Fpjdpezz Ra Usfx Aanop 1. Feeding of the sanitaryware via a feed conveyor 2. Removal of the workpieces from the feed conveyor via an automatic transfer device 3. Transfer of the workpieces to the carousel 4. Workpiece recognition takes place at the transfer position using CeramDetect 5. Type and position of the workpiece are recorded for the automated glazing process 6. Transport of the workpiece on the carousel to the glazing position 7. Automatic glazing by the Kawasaki 6-axis glazing robot 8. Transfer of the workpieces by the Yaskawa handling robot to the base cleaning station 9. Transfer to the base cleaning station and subsequent removal 10. Placing the workpieces on a transport system Special advantages: - Automatic workpiece recognition and position determination - Flexible processing of different sanitaryware models - Combination of glazing robotics, automated handling, and base cleaning - Complete process cell instead of individual robot components Scope of supply and notes: - The sale includes the existing components of the described robot glazing cell - Technical documentation, circuit diagrams, robot programs, and existing software versions will be provided with the system, subject to availability - Dismantling, loading, and transport need to be coordinated Further technical details can be provided.

Year of construction: 2003, condition: good (used), Type: TLI 4500/4300 Device No.: 03501 Year of manufacture: 2003 Device height: approx. 4560 mm Device width: approx. 4280 mm Device depth: approx. 2330 mm Number of shelves: 5 Shelf width: approx. 3610 mm Shelf depth: approx. 710 mm Shelf height: approx. 1060 mm Load capacity per shelf: 200 kg Fjdpjhyhlnefx Aanepp Total load capacity: 1000 kg Color: beige

Condition: good (used), Year of construction: 1989, Max. turning Ø:1400mm Table Ø: 1200mm Control: CNC Altstohm Cyber 3000 Length: 2700mm Width: 2400mm Fodpfx Aaowvrtuonjpp Height: 3950mm Weight: 0kg