Used Carpentry Circular Saw for sale (6,023)

Condition: good (used), Year of construction: 1997, Semi automatic Aluminium circular saw, blade Ø 350 mm, capacity Ø ca. 125 mm, motor 3,7 / 4,5 kw 2-speed 1420/2880 rpm, vertical clamp, stops 30°, 45°, 60° 90° double side, blade; dimension 100x115x155 cm, weight ca. 600 kgs Kedpfx Aotqfvyjhzswt

Condition: good (used), Year of construction: 1987, functionality: fully functional, saw blade diameter: 375 mm, cutting range round steel at 90°: 135 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 680 kg, Semi automatic circular saw, blade Ø 375 mm, capacity Ø ca. 135 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, hydraulic vertical clamp, 1 horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device, measuring device 2 meters; dimension 85x110x180 cm, weight ca. 680 kgs Kwjdpfx Aox Dl Dmshzet

Condition: good (used), Year of construction: 1991, functionality: fully functional, saw blade diameter: 400 mm, cutting range round steel at 90°: 145 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 700 kg, Semi automatic circular saw, blade Ø 400 mm new, capacity Ø ca. 145 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, vertical clamp, horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device; dimension 85x110x180 cm, weight ca. 700 kgs Kwodpfx Ahewp Ipxezot

Condition: excellent (used), Saw blade Ø: 370 mm Cutting capacity at 90° round: 120 mm square: 100 mm rectangular: 180 x 100 mm at 45° round: 120 mm square: 100 mm at 60° round: 110 mm square: 90 mm Kedpfjx Ek A Tjx Ahzewt 2 saw blade speeds: 15/70 rpm Drive motor: 400 V, 1.8/2.2 kW Required space: 1000 x 1000 x 1800 mm Weight: 390 kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, Length of sliding table: 3,000 mm Cutting width at rip fence: 1,000 mm Cutting height with blade diameter 450 mm: 75 - 150 mm Cutting height with blade diameter 350 mm: max. 100 mm (each at 90-degree blade position) Double carriage on steel round guides, no Pertinax Reinforced main saw motor: 7.5 kW Maximum saw blade diameter: 450 mm Height adjustment of the saw unit via dimension input on the control panel Motorized tilt adjustment of the saw unit via dimension input on the control panel Supplied with newly installed 350 mm saw blade Kwjdpfxox Dax Ee Ahzst 2-axis scoring saw unit, can be set in the control system to desired height and alignment relative to the main saw blade Scoring unit automatically lowers below table level when not in use Adjustment of the scorer can be done while the machine is running RAPIDO scoring saw blade – simplifies scoring width adjustment, set up in max. 3 minutes Adjustment range: 2.8 – 3.8 mm Additional accessories: - Mitre fence extendable to 3,200 mm, with 2 foldable stops - LASER cutting line indicator, e.g. for trimming cuts on solid wood planks

Condition: good (used), Year of construction: 1991, cutting width (max.): 1,050 mm, cutting height (max.): 135 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, overall weight: 930 kg, power: 5.5 kW (7.48 HP), Equipment: scorer, MAKA SC 3200 Sizing saw with scoring unit Manufacturer MAKA/Griggio Technical data: Trimming carriage 3200mm cutting length 3300mm Cutting width right from saw blade 1050mm saw blade max. 400mm cutting height 135mm Saw blade can be tilted 0-45°. cutting height at 45° = 90mm (400'er saw blade) motor 5,5 KW/400 Volt 3 speeds 3/4/6000 rpm motor scorer 0,75KW Scorer Ø 125mm suction connection 120mm wide and narrow protection hood dimensions 3250x3100x830mm Ksdpfsp H Tgbjx Ahzowt Weight 922 KG

Condition: excellent (used), 5.5 kW motor Scoring unit Kedpfx Ajw U Th Aohzswt Table length: 200 cm Ground clearance: 133 cm

Condition: excellent (used), Year of construction: 1977, Panel saw Scoring unit Year of manufacture: 1977 1250 mm to the right of the blade 2800 mm cutting length 5.5 kW Dimensions approx. 2800 x 1200 x 950 mm Weight approx. 900 kg Kwedpfxswc Svps Ahzjt Not tiltable

Condition: excellent (used), Year of construction: 2016, Format 4 Kappa 550 Positioning control e-motion – TFT screen Year of manufacture: 2016 320 cm sliding table 5.5 kW motor with brake Scoring unit control Max cutting height: 200 mm Saw blade: 250 - 550 mm Speeds: 3000 / 4000 / 5000 rpm Scoring blade rotation speed: 9000 rpm Motorized rip fence Saw blade tilting up to 45 degrees, single-sided Electric height adjustment Operator panel at eye level Crosscut fence with digital display Kwsdex Rugtopfx Ahzjt Movable support rail with digital angle display Crosscut fence with length compensation Extraction connection: 120 mm and 100 mm Extension arm with swing-away function Cutting width: 1348 mm Crosscut fence up to 3200 mm Control station on sliding table Dimensions (without extension arm): 3400 x 2200 mm Weight: 1300 kg

Condition: good (used), Year of construction: 2021, functionality: fully functional, Used grinding line for circular saw blades Model: 2 × PRESTIGE (HSS/CERMET grinding machines) + 1 × LOAD-5 (5-station automatic loader) Condition: Used, in good technical and visual condition Kedpfxjxx Ix Aj Ahzjwt Saw blades: Ø250–630 mm

Condition: new, Circular saw blade diameter 300 mm Bore 40 mm Kjdpfxjmxi T Ae Ahzowt thickness 3 mm Number of teeth 180 Pitch circle driver bore 63 mm diameter driving hole 11mm HSS unused ,from magazine liquidation bearing number 28418

Condition: new, Circular saw blade HSS diameter 225 mm Number of teeth 180 pitch 4 mm Kwsdemxi T Uspfx Ahzjt width 2 mm Bore 32 mm (28419) unused, from magazine liquidation

Condition: ready for operation (used), Year of construction: 2019, overall weight: 1,500 kg, total height: 1,250 mm, working width: 930 mm, product length (max.): 2,200 mm, General Data Machine weight 1500 kg Measurements height 1250 mm Kwedpfx Ahex D E T Ujzet Dimensions Machine Length 2200 mm Technical Specification Working Width 930 mm Feed Speed 12 m/min This WINTER MBS 930 was manufactured in 2019. It features a motor power of 22.0 KW and a spindle diameter of 74 mm. The saw blade diameter is 205 mm, and it operates at a speed of 2600 rpm. Feed speed ranges from 0 to 12 m/min. Ideal for precise wood cutting. Contact us for more information. Application Types Sawing (Wood)

Year of construction: 2019, condition: ready for operation (used), General Data Machine weight 1150 kg This Behringer PSU 450H was manufactured in 2019. It features a robust gear and worm gearbox driven by a 3-phase, 4.0/4.8 HP motor, ensuring durability and efficient operation. The user-friendly control panel includes handwheel controls for material stop and clamping pressure. Its hydraulic system is powered by a 2.4 HP motor with a 6.6-gallon pump. Additional features include a coolant system and a weight of 1150 kg. Contact us for more information about this machine. Kedpjx D Iqpefx Ahzewt Application Types Sawing

Condition: used, Diameter: 370 - 380 mm width: 3-5 mm drilling: 60 mm bolt circle: 100 mm * like new or sharpened, * 8 pieces, * suitable for Holzma OPT HPP 350 or similar. Kwodpfx Aslf I D Eohzjt

Condition: used, 1200064 Cutting machine for grinding small circular saw blades. saw blade ø: max. approx. 300 mm Kwedpfx Ajulfftjhzet Saw blade ø: max. approx. 300 mm

Condition: used, Multi-blade circular saw Waco Lamell 90 for sawing, trimming, ripping or grooving boards with new feed chain. Cutting height max. approx.: 100 mm chain width: 300 mm Kwsdpfx Ahew Ng T Uozjt Clamping length approx.: 300 mm clamping length approx.: 300 mm Chain: New Function: Lowered chain in the cutting area function: Lowered chain in the cutting area engine: 45 kW

Condition: good (used), Year of construction: 1996, functionality: fully functional, cutting height (max.): 75 mm, cutting width (max.): 1,200 mm, saw blade diameter: 400 mm, Slitting and cross-cutting saw well maintained in good condition Year of production 1996 GOMAD Poland from the new we are the only owner on the equipment of the unit with the undercutting slab and an additional guide for cutting at an angle, up-and-down blade and tilting at an angle up to 45 degrees DTR documentation. Technical data Undercutter on a separate motor 0.75 kw Tilting at an angle 0 45 ' Side carriage Upper shield on the arm Polish manufacturer Gomad Massive stable strong construction Extension and extension tables Cutting width on the right side 120 cm Main saw motor 6 kW, 2880 rpm Kodpfx Aheu Axf Njzowt RPM of undercutting saw 8500 rpm Swing of the saw 0-45° max. bore diameter of main saw f 30 mm max. blade diameter 400mm Undercut saw bore diameter f 22 mm

Condition: new, Year of construction: 2023, functionality: fully functional, cutting height (max.): 79 mm, saw blade diameter: 250 mm, cutting width at rip fence: 769 mm, total height: 7,900 mm, total length: 14,050 mm, total width: 15,500 mm, table width: 792 mm, table length: 508 mm, input voltage: 230 V, extraction connection diameter: 100 mm, overall weight: 120 kg, rotational speed (max.): 3,800 rpm, hole diameter of the disc: 30 mm, power: 1.45 kW (1.97 HP), The Fusion 1 model is an excellent solution for anyone looking for a compact but very accurate and high-quality saw to start with - Polished cast iron table. - Robust cast iron motor suspension. - Can be used with DADO circular saw blade set. - Two T-slot rails on both sides of the circular saw blade. - Quick and easy control and tilting of the cutting height. - Lever for quick exchange of circular blade. - Positionable main switch. - Quick attachment of the riving knife. - Additional rear table included in the price. - Sufficient power for longitudinal and cross cuts up to 79 mm in height. - Storage space for tools and rulers that are always to hand. - Type: Fusion 1 - Recommended area of application: Craftsman - Power (230 V): 1450 W - Recommended fuse switch: 13 A - Disc x clamping: 250 × 30 mm - Rotations: 3800 rotations/min. Kodetuurtopfx Ahzswt - Tilting of the disk: 0-45° - Max. Max. cutting height at 45°: 50 mm - Max. Cutting height at 90°: 79 mm - Max. Cutting width: 769 mm - Extraction: 100 mm - Cast iron table size: 508 mm × 792 mm - Overall table size: 1118 mm × 792 mm - T-slot rail dimensions: W × H 24.3 mm (19 mm), × 4.2 (10.7) - Dimensions: 1550 mm × 1405 mm × 1100 mm - Weight: 110 kg - Packaging size: - Cardboard box on its own pallet 1330 mm × 700 mm × 790 mm - Weight incl. packaging: 120 kg Scope of delivery - elongated ruler - Angled ruler - Gripper for small parts - Upper suction hood - Rear table extension - Carbide circular saw blade for universal use (diameter 250/30 mm, Z40 - Hose for suction The machine is delivered partially disassembled in a transport box. The set-up time is estimated at approx. 1 hour.

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Kwedpjuiy Nysfx Ahzst Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Condition: refurbished (used), Year of construction: 2024, Overhaul year: 2024 Saw blade max. carbide 500/550 mm Drive power saw motor: 6 KW Saw motor speed in 6 stages: 2400- 3200 min-1 Saw blade cutting speed (500-550 mm): 3800 - 5500 m/min Saw blade feed steplessly adjustable 0-40 mm/s Saw height control infinitely adjustable fully electronic Working area square 90° max.: 160 x 160 mm Working area flat 90° max.: 380 x 60 mm Working area round: 90° max.:165 mm Feed length: 10-9999 mm Feed speed AC servo max. 400 mm/s Compressed air connection on site 6 bar Weight(saw)approx.:2850 kg Dimensions LxWxH(saw)approx.:2900mm x 1725mm x 2200mm Footprint LxW 2900mm x 1725mm The machine is in mint condition, both technically and visually, after a completed retrofit. Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The positioning system ensures simple and very profitable operation of the machine. Thanks to the powerful motor, short cycle times can be achieved even when sawing thick-walled profiles or solid materials. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of the ball screw - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive (optional) - New electrical components - New pneumatic lines - Maintenance or replacement of all hydraulic cylinders and valve terminals - Overhaul of the extraction system - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the soundproof cabin The machine also has - Soundproof cabin - Zero point adjustment (manual) Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Chain magazine for 4/6m materials - Splitting extension (for a high-quality cut surface without return marks) Kedpsuiy Rqsfx Ahzswt - Horizontal clamping saw line - Cut stop in material feed unit - Reinforced motor 11 KW - Roller conveyors - Delivery and installation on your premises - Training of your employees

Condition: as good as new (ex-display), Year of construction: 2024, Automatische langssnijzaag Raimann FlexiRip “Jrionline” Zaag lengte : 6200 mm Maximale zaaghoogte afhankelijk van de diameter van het zaagblad, variërend van 85 tot 210 mm. Kwodpfx Asu Sg Anjhzot Alleen gebruikt als demo, praktisch als nieuw, met slechts 34 draaiuren.

Condition: new, Year of construction: 2005, Carriage length: 1500 mm Cutting width at rip fence: 700 mm Cutting width at crosscut fence: 2200 mm Cutting depth: 100 mm Scoring unit: no Saw blade height adjustment: manual / hand crank Saw blade tilt adjustment: manual / hand crank Rip fence adjustment: manual Saw blade angle display: digital Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 315 mm Kwedpfoxrbh Rsx Ahzot Speeds: 1 Motor power: 4 kW Motor brake: yes - automatic Extraction connection: 80 mm and 120 mm Machine length: 3000 mm Machine width: 1700 mm Weight: 900 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Double edger and trim circular saw with electronic control, consisting of: RET alignment and infeed table. Chain bed in front of the machine with liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Passage width 1000 mm. Cutting height 125 mm. Feed speed frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment hydraulically, electronic positioning control with the following setting options: Continuously variable, cm indexing, and switchable to 2 cm indexing. Cutting width between flanges 24 - 440 mm. 10 adjustable fixed dimensions, direct input in mm. Constant dimension allowance, shrinkage allowance (percentage). Ksdpfx Ahjwn D Izezjwt Splitter wedge pair: 1 x zero line, 1 x independently hydraulically adjustable with electronic positioning control. Splitter wedge opening 48 - 600 mm. Chain bed on the outfeed side. Motor 90 kW with power belt drive. Hydraulic unit. Chip separator ASV DK II with 2 separating lamellae. Electrical cabinet with power section and PLC control. Control panel. Lath clamping sleeve 403 mm clamping length. Adjustment and zero sleeve. Professionally dismantled and loaded onto truck, free of charge.

Condition: used, Jrion HFS-170/15-SA long-cut circular saw for precise longitudinal cuts in solid wood, panel materials and wood composites. cutting length: approx. 5,300 mm Kedpfx Aoxvcacjhzowt