Cold Circular Sawing - Automatic

BERG & SCHMID VKS 370 VA MPS

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,470 kg, fuel type: diesel, tank capacity: 230 l, color: beige, power: 27.21 kW (37.00 HP), output current: 47 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 17 kW (23.11 HP), nominal power (apparent): 22 kVA, continuous power: 20 kW (27.19 HP), continuous power (apparent): 20 kVA, total length: 2,800 mm, total width: 1,063 mm, total height: 1,703 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, AVS Diesel Generator DW 20 CU 15 AK14A PRP Power: 16 kW / 20 kVA ESP Power: 17.6 kW / 22 kVA Engine: Cummins 4B3.9G11 Emission Stage: - Speed: 1,500 rpm Mechanical speed governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford PI114D Voltage: 400/231 V Control panel: InteliLite AMF Type: canopy set; weather-protected, sound-insulated • Emergency stop switch • Radiator with mechanical fan • Base frame design with integrated fuel tank (230 L) and forklift pockets • Voltage and frequency regulation according to ISO 8528-5 • Unit intended for stationary use only Please note that these units are not approved for mobile use in accordance with the applicable EU regulation. The units are sold as B-grade goods. B-grade means that the units may show cosmetic imperfections such as surface rust or rust on the enclosure. These defects do not affect the function or performance of the units in any way. By accepting this offer, you explicitly acknowledge the described properties of the units and their stated condition. Kdodpfxswu D Une Abvsi

Year of construction: 2024, condition: new, machine/vehicle number: H3000-H5000TM, Universal testing machine H3000TM-H5000TM according to DIN EN ISO 7500 The universal testing machine of the H3000TM-H5000TM series is a single-spindle machine, a robust construction made of aluminum and V2a with ball screws, ball bushing guides and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor controlled and has a membrane keypad. The 2-line LCD display shows the force and travel. The testing machine can be used as standalone or with a PC via USB interface. The displacement is measured by means of an encoder 0.01 mm visible resolution on LCD (internal 0.0001mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally it is possible to add a second channel for a second load cell or a displacement transducer. The universal testing machine is manufactured with two different travels, 500mm or 1200mm (without load cell and testing tool). Further scope of delivery: One load cell up to nominal load, 220 Volt cable, USB cable, description, CE declaration of conformity. For more information, please refer to the attached description. Load cell 3000N-5000N Measuring range: 5-5000N tension and compression, with nom. 2mV/V output signal, overload protection: +/- 1000%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate Long travel extensometer HE 900mm measuring travel, measuring arms motorized, including electronics Accuracy class class 1 from 1mm travel according to DIN EN ISO 9513 Measuring principle optical incremental Measuring path 900 mm , minus measuring length Display error 6 µm or 2 Resolution 1 µm Actuating force 10 cN Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps Lo adjustment is manual Measuring arm opening and closing is motorized specimen diameter 0-30 mm specimen thickness 0-30 mm sample width 0-100 mm Weight approx. 32kg Scope of delivery strain gauge complete with electronics Kodpfoiq Hxksx Abvsdi Cutting edges round: 1 set each carbide / rubber wear parts measuring blades optional rectangular cutting edges ATTENTION: When using optional cutting edges a readjustment of the lo a readjustment of the lo stop is necessary.

Condition: used, Year of construction: 1969, max. wheel diameter 160,175 mm gear width 355 mm max. module 4,5 spindle bore 75 mm centre distance 410 mm min. number of teeth 2, 3 cutter diameter max. 115 mm cutter length max. 105 mm axis distance between cutter and workpiece - max. 138 mm axis distance between cutter and workpiece - min. 30 mm milling head -swivable 120 ° milling spindle speeds 70 - 400 U/min axial-feeds 0,25 - 4,0 mm/U radial feeds 0,09 - 1,5 mm/U total power requirement ca. 9,5 kW Kdjdpfxsvzhf Sj Abvji weight of the machine ca. 3,5 t dimensions of the machine ca. 1730x1400x1440 mm Equipment/accessories: - Interchangeable wheels - Milling arbors - Clamping devices - Documentation

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Kjdpfxovr Eh Ej Abvsdi DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1988, tail stock ja ja Kdedpfx Abou Su I Eevoi condition nicht geprüft weight of the machine ca. 3,8 t

Condition: good (used), Year of construction: 2012, arm reach: 2,696 mm, controller model: KR C4, KUKA Robots Model: KR 90 R2700 pro Technical data Maximum reach: 2696 mm Rated payload: 90 kg Rated supplementary load, rotating column / link arm / arm: 0 kg / 0 kg / 50 kg Rated total load: 140 kg Pose repeatability (ISO 9283): -/+ 0,06mm Number of axes: 6 Mounting position: Floor Footprint: 830 mm x 830 mm Weight: approx. 1058 kg Axis data Motion range A1: -/+ 185 ° A2: -140 / -5 ° A3: -120 / 155 ° A4: -/+ 350 ° A5: -/+ 125 ° A6: -/+ 350 ° Speed with rated payload Kedjtpwxlopfx Abvjdi A1: 136 ° / s A2: 130 °/ s A3: 120 ° / s A4: 292 ° / s A5: 258 ° / s A6: 284 ° / s Operating conditions Ambient temperature during operation: 10 °C bis 55 °C (283 K bis 328 K) Controller: KR C4

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° control FANUC Ksdpfeqvd Iqjx Abvodi Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: refurbished (used), Dear customers currently we offer a disc sanding machine of the brand Zimmermann. Here are some technical datas: Kdjdjh Dbmyjpfx Abvsi Disc diameter: 600mm Table length: 755mm Table width: 285 mm Table tilling up and down: 30/45° Protractor: 60/60° Power: 3,5 kW Speed: 1.500 rpm Dimensions: L 90 cm x B 65 cm x H 130 cm Weight: 290 kg with protractor We are looking forward to your questions and inquiries.

Condition: used, Year of construction: 2003, Control BWO tip circle diameter max. 700 mm root circle diameter min. 50 mm height of profile max. 35 mm number of spindle speeds 0 - 5400 min-1 Kdsdpfsxt Ur Sox Abvei table load capacity max. 500 kg Overall size 370x220x300 cm Total weight, approx. 15000 kg Number of working hours 94082 h Equipment: BWO control system All axes CNC controlled Oil mist extraction Coolant cleaning system with cooling unit Dittel balancing unit Accessories: Grinding wheels Ø400mm incl. Grinding wheel flanges 1 diamond dressing roller, manufacturer Dr. Kaiser, Ø160mm Counterholder tip Control cabinet: Width 70 cm x length 280 cm x height 220 cm Machine: Width 220 cm x length 370 cm x height 300 cm Coolant system: Width 170 cm x length 240 cm x height 250 cm

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm Kdjdpfx Abod Iipmsvoi total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens