Used Cartridge Filter for sale (7,620)

Condition: good (used), Clean air extraction Godpfx Anerb D Njleuc Used machine, good condition Pictures to follow Mobile Jet 160, Connection 160, Fan 2.2 kW Air flow rate 1850 m³/h / 400 V

Condition: good (used), Year of construction: 2012, functionality: fully functional, volume flow: 18,000 m³/h, filter area: 120 m², Filter hose length 2000 mm Gjdpfx Aswhlkwjnlsuc Mechanical/pneumatic shaking Base assembly with agitator and screw discharge Gear motor 2.2 kW Connection for briquette press with air recirculation

Year of construction: 1996, condition: used, functionality: fully functional, machine/vehicle number: NF-1706/2896, A Novotecnic candle filter system utilizing the precoating principle is available for the treatment and purification of grinding oil. Operating fluid: grinding oil, flow rate: 50 l/min, tank capacity: approx. 800 l, control: Siemens PLC. Documentation available. On-site inspection possible. The filter system was used in our facility to filter carbide from the coolant oil during tool grinding. Since the system is equipped with a drying unit, the carbide powder could be marketed effectively. Guedpey Sw Rqsfx Anloc

Condition: used, Year of construction: 1994, Absackstand filter used Year of manufacture: 1994 with weather protection enclosure with return air ducting with S 250 fan 4590 m³/h Motor 4 kW Availability: short notice Stock location: Villingen-Schwenningen Gusdpfxsy Nuhho Anlec If dismantled and collected by the buyer from the site, the system can be made available for 500 € + VAT.

Condition: used, Year of construction: 2016, operating hours: 16,859 h, type of input current: three-phase, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS AirTower Filter Ventilation Tower, 5,000 m³/h. Industrial filter ventilation for welding halls — designed for a variety of technological processes in production plants, primarily for metalworking. Top-mounted air intake and draft-free air discharge at floor level — directly to workstations. Layered filter ventilation principle; the unit does not require ductwork installation. Cartridge filter elements — self-cleaning via compressed air pulses during operation. Filter cleaning by differential pressure — no compressed air loss. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air without causing drafts, at a velocity below 1.2 m/s, precisely where workers breathe. Covers a broad 270-degree area. The tower operates on the layered ventilation principle, recommended by trade associations and considered the most effective form of air circulation. Guedpfeyq Nl Njx Anloc Year of manufacture: 2016 Operating hours: 16,859 h Specifications: - 3.9 kW EC fan - Capacity: 5,000 m³/h - Filter surface area: 80 m² - Filter cartridges: 4 pcs - Additional high-efficiency final filter (F9 filtration class) provides increased air cleaning performance and additional protection for the fan in case of main filter failure. - 100 l dust collection drawer - Very quiet operation: 75 dB(A) - Filtration efficiency: > 99.6% - Stock No.: 1109

Condition: used, Year of construction: 2003, Overview This PALL Microflow filtration system is designed for the crossflow filtration of beer, enabling continuous and fully automated clarification processes. The system is configured as a tandem installation with a capacity of up to 50 hl/h, suitable for medium to high-capacity brewery operations. It operates with membrane filtration modules, allowing gentle product handling and stable filtration performance. The unit includes pumps, integrated CIP system, and Siemens-based automation, ensuring a high degree of process control and hygiene. Technical Specs  Capacity: approx. 50 hl/h (tandem system, 24h operation) Filtration type: Crossflow (microfiltration) Number of modules: 48 Operating temperature range: 0°C to 70°C Equipment: Pumps, integrated CIP system, complete piping, control system Control system: Siemens S7 with Siemens OP07 HMI Automation level: Fully automatic Equipment  Filtration modules (48 units) Product pumps Integrated CIP system Complete piping system Gujdpfx Anoy Etcpelec

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SN-22-1409, For sale is a high-quality extraction system from the brand Absaugwerk, year of manufacture 2023, specifically designed for the collection and filtration of welding fume (e.g. aluminum dust). The system meets the latest technical standards and includes: Equipment: • Extraction table with downward extraction • Integrated wet separator in line with the latest safety standards • Suitable for professional welding applications • ATEX-compliant (Zone 2, Ex II 3G) • Power: 4.0 kW / 400 V / 50 Hz • Condition: almost as new, fully functional Collection by buyer. Assistance with dismantling/transport can be arranged if required. If you are interested or have any questions, please feel free to send me a message. On-site inspection by appointment is possible. More metalworking machines available, such as bench drill presses, press brakes, column drill presses, eccentric presses, heavy-duty racking, welding tables, MIG/MAG welding units, compressors, etc. – please check my other listings. Domestic price net plus VAT or Net export price Pick-up only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. More photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Nous parlons Francais / Мы говорим по русски Godox Da Tispfx Anlsuc We speak English / Noi vorbim româneste Viber / WhatsApp / Skype For an additional fee, we handle all customs and registration formalities. We transfer vehicles to the port for an extra charge.

Condition: good (used), Fan filter, fan array, air cooler, control cabinet fan, filter fan, server blower, server fan -Manufacturer: Arctic, Server cabinet fan with housing -Type: F8 915 -Voltage: 12 V -Number: 4 fans included Gsdpfx Anjy Ecdislouc -Price: per piece -Dimensions: 500/280/H90 mm -Weight: 1.7 kg/pc.

Condition: good (used), Fan filter, fan array, air cooler, control cabinet fan, filter fan, server blower, server fan Gedjy Eccxspfx Anlsuc -Manufacturer: NMB, Control cabinet fan server fan with housing -Type: BG0903-B044-000 -Voltage: 12 V -Number: 8 fans available -Price: per piece -Dimensions: 500/280/H90 mm -Weight: 1.9 kg/pc.

Condition: excellent (used), 2-component gun, multi-function gun, cartridge gun, cartridge press, double cartridge dispensing gun, 2K mixing gun -Manufacturer: Plunger, Dual Cartridge Dispensing Gun Mixpac Strap Kit -Quantity: 1x cartridge gun available -Price: per piece -Dimensions: 300/210/H85 mm -Weight: 1.2 kg Gsdpfxju Aigke Anlouc

Year of construction: 2021, condition: ready for operation (used), An automatic Lorenz filter test station for the automatic testing of filter media, half masks, canister filters, and medical face masks is available. Standards: EN143/EN149/EN14683/ISO16900-3 and more, module components: flow meter/photometer upstream and downstream of the test specimen/aerosol generator/suction and extraction unit, aerosols: paraffin oil/Emery oil/DOP/DEHS, volume flow range: 8L-300L/min, min. separation efficiency measuring range: 0.0001%, min. breathing resistance measuring range: 5Pa-1000Pa, max. filter air velocity: 10.2cm/s, max. test area: 237.8cm³. The device has been used little and would not need to be serviced. Documentation available. An on-site inspection is possible. The image is an example. Gusdpey Tx Slefx Anlsc

Condition: as good as new (ex-display), Clean Air Filter Type: Power Unit 250 P FU Offer type: Demonstration machine Gsdpfx Anjhfmpxeljuc Technical data: Motor power: 7.5 kW / 3-phase / 400 V / 50 Hz Inlet diameter: 250 mm Rated air flow: 3,534 m3/h Max. air flow: 4,900 m3/h Negative pressure at rated flow: 3,184 Pa Filter surface area: 22.4 m2 Compressed air cleaning including integrated pre-separator including integrated automatic extinguishing system including inverter for speed control including integrated acoustic enclosure (-4 dB(A)) Chip collection volume: 2 x 250 L Sound pressure level: 71 dB(A) incl. dust lock Dimensions (L x W x H): 3,000 x 1,058 x 2,361 mm Weight: 850 kg

Condition: used, Year of construction: 2017, functionality: fully functional, operating hours: 21,809 h, type of input current: three-phase, suction capacity: 20,000 m³/h, filter area: 222 m², total height: 3,700 mm, total length: 1,800 mm, total width: 2,100 mm, overall weight: 1,600 kg, Novus AirTower FT0120018 EC filter ventilation tower – 20,000 m3/h Industrial filter ventilation for welding halls – numerous technological processes in production facilities, mainly involving metalworking. Very low energy consumption due to the use of innovative fans. Instead of a standard fan, an EC fan is used, providing SIGNIFICANT savings by minimizing electricity consumption. The EC fan with a built-in frequency converter also allows for control of the fan speed / energy consumption / device performance within a working range of 60%, 80%, and 100%. Air is drawn in from the top and discharged downwards without creating drafts – directly to the work areas. Layered filter ventilation principle; the device does not require the installation of pipelines. Patron-type filter cartridges – self-cleaning using compressed air pulses during operation. Filter cleaning using pressure difference – no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from the top, filtered, and then released at floor level as clean, breathable air without generating drafts, at a speed below 1.2 m/s. Precisely where employees breathe it in. And this is within a wide range of 270 degrees. At the same time, the Airtower operates according to the layered ventilation principle, recommended by trade unions and considered the best type of air circulation. Year of manufacture: 2017 Total operating hours: 21,809 Gujdpoxxalnefx Anljc Parameters: - 4 EC fans with a power of 3.9 kW each - Airflow 20,000 m3/h - Filtration area 222 m2 - 6 patron-type filter cartridges - Fine final filter - Fireproof package - EC Blue ENERGY PACKAGE - Hall dust sensor – dust sensor with signaling (LEDs) that transmits dust level information to the Airtower for device power regulation. Energy savings depending on the amount of dust present in the hall at any given time. Very quiet operation Stock number: 1066

Condition: used, functionality: fully functional, Year of construction: 2008, Used filter system Manufacturer: Dantherm Year of manufacture: 2008 Guodszav Euepfx Anljc Type: FS 720/5.50/770 Volume flow: 72,000 m³/h Temperature: 120 °C Installed total area: 1047 m² Effective area: 990 m² Total connected power of all drives: 10 kW Exhaust system complete with duct system Chimney 3 x screw conveyors

Condition: good (used), Year of construction: 2015, Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, mobile welding fume extraction filter devices, welding fume extractors -Manufacturer: Kemper, filter unit for mobile welding fume extraction -Type: 63100 -Drive: 1.6 kW -Volume flow rate: 340 m³/h -Extraction arm: not included -Machine dimensions: 300/300/H690 mm Guodpjx Hvqfefx Anlec -Weight: 23.5 kg

Condition: excellent (used), functionality: fully functional, volume flow: 320 m³/h, operating pressure: 370 bar, power: 4.6 kW (6.25 HP), input voltage: 380 V, input current: 9 A, rotational speed (max.): 2,910 rpm, protection type (IP code): IP55, Vacuum pump – 2 units VACOM Type: VC 340-720 Power: 4.6 kW With central filters and Motan control system – 2 units Gjdpfx Aneyxwp Holjuc PRICE REDUCTION FROM 5000 TO 4500 EUR FOR BOTH SETS!!!

Year of construction: 2011, condition: good (used), Offer 24370 Sludge filtration system in a sea container + conveyor belt Technical data: Gedet Srkpepfx Anleuc - Sludge filter press JUNGHANS with cylinder unit - Flocculation system - Pumps - Separate conveyor belt for sludge removal, length 8.0 m - Control cabinet with electrical equipment - Water collection tray made of aluminum on the entire container floor - Lighting - Sea container with 4 doors - Space requirement for the container: approx. W 6.0 x H 2.4 x D 2.4 m - Weight: approx. 5000 kg - Space requirement for the conveyor belt: approx. W 8.0 x H 0.8 x D 1.0 m - Weight: approx. 1000 kg

Condition: ready for operation (used), Belt Filter, Pressure Filter, Emulsion Filter, Sludge Filter, Lubricant Filter, Emulsion Filter, Used Machine Manufacturer: Faudi Dimensions: 2460 x 1660 x 1270 mm Belt size: 2200 x 1270 mm Active filtering surface: 1400 x 1200 mm Capacity : 1200 l/m The Klappbandfilter is used for cleaning contaminated cooling and lubricating fluids in the metalworking field, as well as for processing various sludge waste during rough machining, especially aluminum, or for handling abrasive grinding sludge. When the cooling and lubricating fluids and grinding sludge are cleaned, they can be reused in the process for longer periods, significantly contributing to environmental protection. Additional benefits include heat dissipation at the machining site and optimization of the workpieces' surface quality. The Klappbandfilter is versatile and can also be used independently. Its modular design allows it to be optimally adapted to various conditions. The FAUDI design allows for the buildup and removal of filter cakes up to 15 cm thick. With the extra-high filter cake, the separation performance of the filter is further increased. Filter areas of 1, 1.5, and 2.5 m² per filter are possible. Gusdpfxev D Hmaj Anlsc Filter fineness: Up to 10 µm Medium/Fluids: Oils and machining emulsions Filter auxiliaries: Optionally with or without filter auxiliaries

Condition: used, Year of construction: 2001, type of input current: three-phase, filter area: 20.4 m², suction capacity: 3,200 m³/h, overall weight: 350 kg, Oil mist extractor for CNC machines, filter separator by Donaldson Torit. The device is designed for the filtration of oil mist (both emulsions and pure oil), vapors, and fumes originating from various metalworking processes. Filtration efficiency reaches 99.97%. Model: DMC-D1 2.2 kW three-phase fan Inlet diameter: 250 mm Capacity: 3200 m³/h Filtration area – 20.4 m² Year of manufacture – 2001 Guodpfxsymk Udj Anlsc Dimensions: Height – 2.90 m Width – 0.93 m x 0.75 m Weight – 350 kg Stock number – 1111

Condition: new, functionality: fully functional, Details: Manufacturer: KAESER Item: Oil Separator / Oil Separator Cartridge Gujdpfxoy E Rxnj Anlsc Part number: 6.2013.0 Size: Ø 275 x 462 mm Condition: New, in original packaging (OVP) Quantity: 2 units available Application: For KAESER screw compressors Maintenance / Service / Spare part Advantages: Original KAESER spare part Immediately available Ideal for stockpiling or maintenance

Condition: excellent (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Filter holder: Gauze holder for extraction, mobile Guedjyznk Hspfx Anloc -Carrier frame: made of stainless steel -Extraction area: Internal dimensions 1900/440/H1060 mm -Dimensions: 2130/530/H1830 mm -Weight: 74 kg

Year of construction: 1983, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1470, KIESELGUHR FILTER SCHENK TYPE ZHF S50 Type: ZHF S 50 Year of construction: 1983 Material: Stainless steel (V4A) 1.4541 Boiler: Capacity: 3100 liters Permissible operating pressure: 6 bar Permissible operating temperature: 20°C Boiler room: 28 segment clamp screws Dimensions: Volume 3100 L Guodpfotqf A Eex Anljc Length 4900 mm Width 2400 mm Total height 4100 mm Last use: Food (brewery) Technical documentation: Yes

Year of construction: 1977, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1124, KIESELGUHR FILTER SCHENK TYPE ZHF S50 Type: ZHF S 70 Year of manufacture: 1977 Material: Stainless steel (V4A) 1.4541 Boiler: Capacity: 4300 liters Permissible operating pressure: 6 bar Permissible operating temperature: 20°C Guedpfx Aetqf A Rsnljc Boiler room: 28 segment clamp screws 78 strainers Dimensions: Volume 4300 L Length 4200 mm width 2200 mm Total height 4800 mm Last use: Food (brewery) Technical documentation: Yes

Condition: used, with rear wall, lighting, power supply, compressed air supply, hanging system rail, workpiece clamping with height-adjustable support used, make unknown table size 2400 mm x 800 mm external extraction Guedpfx Asvwginenloc power sockets 220 V 5 pieces compressed air couplings 3 pieces running rail with hanger 4 workpiece clamping 2 pieces workpiece supports vertical connection diameter 160 mm space requirement approx. 2400 mm x 1000 mm x 2200 mm storage location 97447 Gerolzhofen, free loading, unpacked handed over in the current condition, as inspected, without guarantee and warranty

Year of construction: 2003, condition: excellent (used), EMC Mains filter Make Hitachi for frequency inverter Gujdpfx Ajgrhimonloc Filter for FFFB - SJ300- 750/900 HF,L 300,100 HF further data,see picture 3 x 220 Ampere length 1000 mm width 300 mm height 190 mm