Used Filtration System for sale (801)

Condition: used, AR Filtration ARNO-2VF-YA & PRF-K23 Filtration Units. Country of Origin: Italy Tedpfexnl Awsx Aacod Location: This lot is located in Bornago, Italy.

Condition: good (used), Year of construction: 1999, The filtration system is used to filter oil (rapeseed, sunflower, soybean oilseeds and others). The system is made to work automatically, it has a command unit that manages the pneumatic valves, and with the help of sensors it controls and manages the work. The system includes a control unit, a piping system with fittings and valves, and a SS filter body. Automatization is completely new and never used! Tedpfx Aaotxc Hpocsd

Condition: used, functionality: fully functional, Total flow of clarified water through PF 1 – 5 or PF 6 – 9 is 400 m³/h. Filter diameter: 3,000 mm Filter media - type PR 1 – 1.6 - Grain size: 1 – 1.6 mm - Bed height: 1,100 mm Operation: Maximum filter capacity: 100 m³/h Filtration rate: 14.3 m/h Backwashing: Backwash water flow: 70 m³/h Upflow velocity: 10 m/h Backwash air flow: 385 Nm³/h The PF units are divided into two sections: PF1-5 (old installation) and PF6-9 (new installation). Only one section operates at a time according to operational requirements. The overall workload is approximately balanced, so each section runs about 4,400 hours annually. The sand filters are regularly backwashed after each operational cycle (80 hours) or when the pressure loss reaches ΔP 25 kPa. The system is fully operational. PF Reconstruction: PF1-5: 10.11.2015 – complete replacement of sand, nozzles, and shell surface maintenance PF6-9: 13.7.2018 – complete replacement of sand, nozzles, and shell surface maintenance. Tedpjxcnauofx Aaced

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, filter area: 65 m², volume flow: 6,574 m³/h, Complete unit: cyclone on feet + fan + rotary valve + piping + electrical cabinet. Tsdpovdtxcofx Aacod Treated air flow: 6,574 m3/H Filter surface: 65 m2 Filter media: Antistatic polyester 550 g/m2 + oleo/Hydro OWR treatment New equipment, never assembled, new price 35 K€.

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Year of construction: 2014 Tsdpfsr A El Esx Aacod Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. "Loose adhesion on the lower part of the dished end" (pictures to follow)

Condition: used, Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: DSF-1020 SS, TIMEX Filtration System: TIMEX DSF 1020 SS Drum Stripper Filter Filter Model: TIMEX DSF 1020 SS Drum Stripper Filter Filter Type: Frame Type Flange Standard: EN 1092-1 (DIN2576) PN10 Application: N/A Service Fluid: N/A Todpjrf U Ensfx Aacsd Capacity: 30 m3 /h Quantity: 1 Unit Inlet TSS N/A Filtration Degree: 2000 µ Filtration Area: 6 m² Drum Diameter / Length: Ø1000 mm / L: 2000 mm Inlet & Outlet Connections: DN150, PN6 Flanged Drain Connection: DN50, PN6 Flanged Working Pressure Min/Max: by Gravity Max. Operation Temp: 55oC Operation Temp: N/A Gearbox Motor Power: 1.1 kW* Required Voltage: 400 V AC / 50 Hz / 3Phz Filter Body / Pipe / Flange Material: SS316L Stainless Steel Filter Screen Material: SS316L Stainless Steel Cleaning Mechanism: Compressed Air + Water Accessories * Control Board (Std.)

Condition: good (used), Year of construction: 2016, Rosenmund pressure filter, 7 m², 316SS, extensive overhaul 2016, including segmented AGP outlet valve, screen segments, variable speed drive, hydraulic power pack, dry gas mechanical seal, mixer: RPM: 16–1460. P=15 kW. Year of construction 2016. Alloy: 316SS. Tjdpfxev Rn S Dj Aacjd

Condition: used, Year of construction: 2009, Overview  This complete compressed air installation was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The setup includes two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD air dryer, and one Donaldson UFA-AC0016 oil separator. Designed to deliver reliable and energy-efficient air supply at up to 8.5 bar, this system is ideal for continuous production environments. The installation has been regularly maintained, with full maintenance completed in August 2025, and is in good working condition. The entire system is still installed and connected, and immediately available for inspection and sale. Technical data  Years of Manufacture: 2009 – 2013 Application: Industrial compressed air system Total Capacity: 2 × 24.1 m³/min Maximum Pressure: 8.5 bar Power Supply: 274.8 kW Scope of Delivery  Compressor | Atlas Copco | GA132 VSD | 2013 Compressor | Atlas Copco | GA132 VSD | 2012 Air dryer | Atlas Copco | FD160 VSD | 2012 Oil separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009 Todpfoxrc Acsx Aaced

Condition: good (used), Year of construction: 1999, PCI -NF MEMBRANE FILTRATION PLANT Item: M-2199-PCI-NF Plant This plant is membrane filtration plant used for remove water and / or very low molecular weight substances from liquid dairy products. The low molecular weight substances that are typically removed with NF membranes are monovalent ions such as K ions and Na ions. With APV Rannie-High Press Pump Good condition, Not used last two years!. Year of Production: 1999. Dimension: L 4.000 MM Tjdjhqhw Ispfx Aacsd W 1200 mm H 1900 mm Press: Medium pressure 20 bar Retentat flow: 1200 l/h

Year of construction: 2020, condition: used, This listing is for a Pall UF/DF Tangential Flow Filtration System. The unit is in excellent working condition and is ready for immediate release. The Pall UF/DF System is a state-of-the-art tangential flow filtration (TFF) skid designed for ultrafiltration and diafiltration (UF/DF) processes in biopharmaceutical manufacturing. This advanced stainless steel unit enables efficient concentration and buffer exchange of biologics such as monoclonal antibodies, recombinant proteins, enzymes, and gene therapy vectors. Engineered by Pall Biotech and manufactured in Germany, this system ensures process reliability, hygiene, and scalability, meeting the rigorous demands of regulated production environments. Ideal for downstream processing in pilot or GMP production, this system features a user-friendly HMI interface, robust control panel, and a fully integrated filtration circuit compatible with single-use or reusable membranes. Key Features GMP-Ready Design – Engineered to support pharmaceutical-grade UF/DF processes. Tedpfxoxl D Awj Aacsd Integrated Touchscreen HMI – For real-time control and monitoring of process parameters. Compact Stainless Steel Skid – Easy to manoeuvre and install in classified cleanroom environments. Automated Operation – Equipped with an intelligent PLC for pressure, flow, and temperature control. Multi-Function System – Supports both ultrafiltration and diafiltration processes. High Purity Tubing & Fittings – Configured with sanitary connections and single-use flexibility. Validated Safety Features – Includes emergency stop button, regulated pressure alarms, and lockable panels. Technical Specifications Parameter Details Manufacturer Pall Biotech (Germany) Year of Manufacture 2020 System Type UF/DF Skid (Ultrafiltration/Diafiltration) Max Allowable Pressure 4 bar (58 psi) Max Operating Temperature 80°C Min Operating Temperature 5°C Control System Touchscreen HMI with integrated PLC Construction 316L Stainless Steel Wheels Lockable castors for mobility CE Marking Yes (Compliant with EU standards) Serial Number Applications Biopharmaceutical Manufacturing – Concentration and buffer exchange for drug substances. Monoclonal Antibody Purification – Clarification and polishing prior to formulation. Gene Therapy & Vaccines – Processing of viral vectors, plasmid DNA, and mRNA. Enzyme and Protein Products – Downstream UF/DF concentration steps. Cell Culture Harvesting – Clarification of lysates and spent media. Formulation – Final buffer exchange before sterile filtration and fill/finish. Benefits Scalable Solution – Suitable for pilot-scale and full production batches. Reliable Filtration – Maintains membrane integrity and product quality. Process Efficiency – Fast changeover with user-friendly operation. High Product Recovery – Designed to minimize hold-up volume and product loss. Validated Platform – Developed by Pall, a global leader in bioprocessing technology.

Condition: used, functionality: unexamined, machine/vehicle number: V250 (Bofa) | WLA250 (Weidinger), input voltage: 230 V, Used solder fume extraction units from Bofa & Weidinger Model: V250 (Bofa) | WLA250 (Weidinger) Voltage: 230V (50Hz) | 1.1A Tedpfx Aexp H Ttsacod Including power cable.

Condition: good (used), Year of construction: 2014, machine/vehicle number: 412, space requirement width: 1,500 mm, space requirement length: 3,300 mm, space requirement height: 2,500 mm, Ultrafiltration system with accessories for the treatment of soil washing wastewater Year of construction 2014, fully functional until dismantling Documentation, operating instructions, E-plans are available. 7 packages; Filtration tank single 1520mm diameter Filtration system with control 330cm x 150cm x 220cm 5 extra Euro pallets with accessories Tjdpfx Aeqzx Dbeacsd

Condition: good (used), Alloy: 316 SS Tjdov Rpbmopfx Aacod

Condition: used, -Dimensions (LxWxH): 1207x819x1162 mm -Automatic filtration -Tank volume: 15 L per tank -Number of baskets: 6 -Power: 42 kW -Voltage: 380 V -Weight: 255 kg -On castors High-Output Electric Fryer, 15L per Tank Performance & Versatility The Henny Penny high-output electric fryer is an ideal choice for foodservice professionals who require high frying capacity and outstanding cooking precision. Designed to meet varying volume demands, the electric fryer is available in multiple sizes to integrate seamlessly into your kitchen layout. Advanced Features Dimensions (L x W x H): 1207x819x1162 mm Power Supply: 380/220V / 3 PH Number of Baskets: 6 Power: 42 kW -Cook the same quantity of product with 40% less oil compared to previous generation fryers. -Automatic oil refill sensors continually monitor oil levels and add fresh oil as needed. -Automatic filtration -One-touch filtration activation -Individual tank filtration as required Tjdpfsxpfzcox Aacjd -Hot oil filtered and ready to drain in under 4 minutes -Wave rinse system for crumb removal -Computerized controls with highly customizable functions -Durable stainless steel tanks -Hinged elements for quick, easy tank cleaning -Full or split tank configuration

Condition: used, Year of construction: 2019, functionality: fully functional, overall weight: 5,000 kg, total length: 50,000 mm, total width: 250,000 mm, input frequency: 50 Hz, Complete Fuel Polishing & Storage System – 130,000 L Capacity Available for immediate decommissioning from a data centre: a fully equipped fuel storage and polishing system designed for reliable diesel generator operation. Main Components: Fuel Transfer Pumps (x4) Independently controlled via front-panel PLC Tjdpfjw Hdg Ujx Aacjd Operational indicators and flow meters (L/h) Filtration Units (Filtertechnik) High-efficiency diesel filtration skids Integrated monitoring and alarm panels (differential pressure, overload, emergency stop) Electrical Control Panels Manual/automatic operation modes System status and fault indicators (low flow, bypass, pre-alarm) Emergency stop functionality Underground Diesel Storage Tanks (x4) Total capacity 130,000 litres Connected via reinforced piping and fuel supply lines Fuel Pipework & Monitoring High-grade piping with safety valves and pressure sensors (Barksdale, Pyropress) Designed for safe and precise operation External Housing – Fuel Pump Room Weather-resistant metal cabin with safety signage (“Highly Flammable”) Internal insulation for added protection This system is ideal for data centres, industrial facilities, or any large-scale diesel generator installations, offering high reliability, complete monitoring, and easy relocation.

Condition: used, This listing is for a Millipore Pro Flux M30 Tangential Flow Filtration (TFF) System. The unit is in full working condition and is ready for immediate release. The Millipore Pro Flux M30 is a high-performance tangential flow filtration (TFF) system designed for demanding applications in the biotechnology, pharmaceutical, and molecular diagnostics sectors. Optimized for crossflow filtration, the M30 provides reliable separation, concentration, and clarification of biomolecules and cell suspensions in both R&D and process-scale environments. With its robust stainless steel construction, precise transmembrane pressure (TMP) control, and compatibility with a wide range of membrane chemistries, the M30 delivers consistent performance across various filtration tasks—from protein concentration and virus clarification to cell culture harvest and synthetic biology sample prep. Key Features Stainless Steel Construction – Durable, sanitary design for aseptic operation and long-term reliability. Optimized TMP Control – Ensures maximum membrane efficiency and longevity through precise pressure regulation. Broad Membrane Compatibility – Supports a variety of membrane types and molecular weight cut-offs for flexible application use. Process Versatility – Suitable for concentration, diafiltration, and clarification steps in upstream and downstream workflows. Compact & Scalable – Ideal for laboratory-scale operations with scalability to pilot and production environments. User-Friendly Interface – Intuitive controls and gauges for straightforward operation and monitoring. Technical Specifications Model: Pro Flux M30 Flow Configuration: Tangential Flow / Crossflow Material of Construction: 316L Stainless Steel Pump Type: Peristaltic or Diaphragm (depending on setup) Pressure Control: Manual and/or automated transmembrane pressure regulation Operating Pressure Range: Typically up to 4 bar (60 psi) Filter Compatibility: Millipore Pellicon, Ultracel, Durapore, and other cassettes Tubing & Fittings: Sanitary-grade with tri-clamp or Luer lock connections Footprint: Compact benchtop design Manufacturer: Millipore (now part of Merck Millipore) Applications Biopharmaceutical Processing – Protein concentration, buffer exchange, and virus removal. Cell Culture Harvesting – Clarification of cell suspensions post-fermentation or bioreactor. Synthetic Biology – Preparation of cell-free extracts, nucleic acid concentration, and purification. Gene Editing & Molecular Cloning – Sample concentration and buffer exchange before downstream analysis. Todpfx Aasxl Dx Socsd Diagnostics Manufacturing – Filtration of assay components and reagent prep for diagnostic kits. Fluorescence & Imaging Sample Prep – Ensures clean, debris-free samples for accurate analysis. Benefits Reliable Performance – Delivers consistent and reproducible results for critical bioprocess steps. Process Flexibility – Adaptable to a wide range of biomolecule sizes and sample types. Aseptic Operation – Designed for cleanroom and GMP environments. Low Hold-Up Volume – Minimizes product loss during filtration. Trusted Brand – Developed by Millipore, a global leader in membrane filtration technologies.

Condition: used, Year of construction: 2017, functionality: fully functional, Mefiag Satilum filtration system Long Life Unit with control Tedpfx Aajxlqw Uecsd 3 units Model: MPF 4500-PP-SY-POL3K-MP10-AUTOFLOW-BYP-B20H

Condition: good (used), Year of construction: 1994, functionality: fully functional, space requirement height: 2,440 mm, overall weight: 1,480 kg, pressure: 2 bar, total width: 1,300 mm, total length: 1,850 mm, total height: 1,650 mm, filter area: 0.75 m², operating temperature: 200 °C, 0.75 m3 enameled steel 760 liter capacity Filter chute Suction chute Nutsche Pressure filter Estrella AG Year of construction: 1994 Diameter: 1000 mm Filter surface: 0.75 m2 Permissible operating pressure: -1/+2 bar Permissible operating temperature: -10/+200 °C Tedpfx Asu U Afujacsd Supporting structure: upright on feet with substructure Opening: hydraulic opening aid Enamel quality: color blue Enamel 2000 Estrella Total volume: 760 liters Total height open: 2440 mm Height closed: 1590 mm L x W 2000 x 1300 mm

Condition: ready for operation (used), Year of construction: 2008, Three cooling lubricant systems with Hyfra cooling units are available. On-site viewing is possible. Tedpfexmkb Ajx Aacjd

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Tjdpew Ivqmefx Aacjd Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 50/15, type of input current: three-phase, total width: 2,100 mm, total length: 1,940 mm, total height: 2,340 mm, workpiece weight (max.): 1,430 kg, Filtration and cooling system for cutting oil (neat oil) with viscosity Tedpfxoxgduvj Aacod

Condition: used, This listing is for the Millipore MpodPilot Enerpac Pilotscale filtration system Tedpoxhgaqsfx Aacod The unit is in full working condition and is ready for immediate use The Millipore MPODPILOT is a pilot-scale filtration system designed for laboratory and pilot plant applications. It is commonly used in processes such as microfiltration and ultrafiltration, particularly in the pharmaceutical and biotechnology industries. The system typically includes a filter holder capable of accommodating pod filters up to 2.2 m² in size, and it is often paired with a hydraulic hand pump for operation

Year of construction: 2015, operating hours: 13,660 h, condition: used, filter area: 18 m², negative pressure: 2,000 Pa, suction capacity: 13,000 m³/h, Oil mist extraction unit for workshop halls – Plug & Play filtration tower designed for extraction of coolant and lubricant emissions in industrial halls. IVAT Ölnebel-T13K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapor extraction. Industrial hall filtration ventilation – suitable for numerous technological processes in manufacturing plants, particularly in metalworking operations. Very often, extraction systems with coolant recovery installed directly on machines are insufficiently effective or simply not present. Machine retooling, frequent opening of machine enclosures, or lack of enclosure at machining heads causes oil mist to escape from machine areas, exposing workspaces and personnel to harmful mist and vapors. Installing a filtration tower significantly improves air quality at workstations and should be considered an ideal filtration and ventilation supplement for halls where fully isolating oil mist using coolant recovery devices is either impossible or very difficult to achieve. Equipped with automatic air and temperature control for the workspace. An innovative PLC control system monitors data and detects threshold exceedances at the workplace, ceiling heat-up, and automatically regulates temperature and air quality. Performance: up to 13,000 m³/h Vacuum: 2000 Pa Filtration area: 18 m² Fan power: 7.5 kW Year of manufacture: 12/2015 Operating hours: 13,660 Tsdpfx Asxnlwzjaced Stock number: 1054

Condition: like new (used), Year of construction: 2020, operating hours: 9,000 h, machine/vehicle number: CL5058002, input voltage: 400 V, pressure: 150 bar, overall weight: 800 kg, tank capacity: 800 l, power: 6 kW (8.16 HP), input frequency: 50 Hz, Equipment: documentation/manual, Features of the high-pressure and filtration unit MULLER Combiloop CL5-800 150 bar/27l: - 800L capacity with level sensor - centrifugal pump for dirty fluid supply - HP Eco+ self-adaptive pump 150b/27L/min (5.5kW) Tjdpoxni E Nofx Aacjd - 8 controllable outlets including one for counter-spindle rinsing - 1 low-pressure pump with constant flow 100L/min 5 bar (1.2kW) - 1 low-pressure pump with constant flow 80L/min 3.5 bar (1.9kW) - automatic filtration 40µ with automatic monitoring and clogging detection - complete high and low pressure filtration - pressure monitoring for part program - neat oil (recommended machining viscosity 15-22 mm²/s – deep drilling 5-8 mm²/s) - includes: EURO COLD chiller unit model RCFO 95t - excellent condition (very little use)

Condition: used, This listing is for the Akta crossflow filtration system The unit is in full working condition and is ready for immediate use An ÄKTA Crossflow filtration system is a type of tangential flow filtration (TFF) system developed by Cytiva (formerly GE Healthcare). It's used primarily in bioprocessing and biotechnology applications to concentrate, diafilter, or clarify biological samples such as proteins, viruses, plasmids, and other biomolecule Core Functions: Concentration – Reducing the volume of a sample while retaining the target biomolecule. Diafiltration (Buffer Exchange) – Removing salts or changing the buffer environment by continuously adding a new buffer while removing permeate. Clarification – Removing particulates or cells from process fluids Key Components: Pump Modules: Typically peristaltic pumps that manage flow rates precisely. Filtration Cassettes: Hollow fiber or flat sheet membranes for ultrafiltration or microfiltration. Pressure Sensors: To monitor and control transmembrane pressure (TMP). Conductivity/pH/UV Detectors: For in-line monitoring of the filtrate and retentate. Automated Control Software (e.g., UNICORN software): Allows recipe-based control, data logging, and trend analysis. Benefits: Automation reduces operator error and variability. Scalable design for seamless transition from lab to production. Precise control of filtration parameters (flow rate, pressure, volume). CIP (Clean-In-Place) capabilities for easy maintenance and compliance with GMP. Tsdpfx Aaoxhf A Rocjd Common Applications: Protein concentration and buffer exchange Viral vector purification Plasmid DNA purification Cell harvest and clarification