Used Chain Belt for sale (11,435)

Condition: used, Year of construction: 2021, - Grinding width: 1100 mm - Grinding height: 3 - 170 mm - Grinding length: 1900 mm Isdpfx Anszuzcmj Neif Wide-belt sanding machine Manufacturer: Felder Type: FW 1102 P Year of manufacture: 2021 Technical data - Contact roller unit - Fine sanding with segmented, electro-pneumatic sanding shoe, 25 mm segment width - Touchscreen color display 7" - Digital grit adjustment - Vacuum table incl. blower in the machine frame - Stepless feed speed 2.5 - 18 m/min, controllable from the touchscreen - Grinding width: 1100 mm - Grinding height: 3 - 170 mm - Grinding length: 1900 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Used Pfaudler Balfour approximately 4.64 m2 stainless steel wiped film evaporator. Evaporator body approximately 700mm diameter X 2100mm straight side. Internal 1460 litre capacity rated full vacuum/1 bar design pressure at 0-160 °C. Jacket 250 litre capacity rated full vacuum/6 bar (5 bar with full vacuum) design pressure at 0-160 °C. Rotor belt driven by 5.5 kw 415 volt 3/50 1440 rpm motor via Flender model ZF80A gearbox rated 10.29/1 reduction ratio. Iedpfx Anjyh Na Ee Njif

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 07110-10-6542, functionality: fully functional, operating hours: 200 h, power: 3.25 kW (4.42 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 6,800 mm, grinding height: 240 mm, height adjustment type: electric, grinding belt speed: 1,900 mm/s, actuation type: electric, total length: 3,700 mm, total width: 1,450 mm, overall weight: 300 kg, Equipment: CE marking, documentation/manual, WIDE BELT GRINDING MACHINE, Type LZG-KE Machine type: LZG-KE Year of manufacture: 2010 Machine number: 07110-10-6542 Motor power, grinding belt: 3.0 kW - Total connected load max.: 3.0 kW - Operating voltage: 400 V, three-phase - Operating current: 7.4 A - Type of protection for electrical system: IP 54 - Installation-side connection cross-section: 5 x 2.5 mm² - Installation-side short-circuit protection: 16 A Grinding belt dimensions: 6800 x 150 mm Iiedpozqa Iyofx An Njf Grinding shoe dimensions: 320 x 145 mm 420 x 145 mm Stand overhang: 680 mm Stand overhang height: 340 mm Size of support table: 2500 x 800 mm Permissible weight load on support table: 100 kg Minimum workpiece length when grinding with a grinding shoe: 350 mm Grinding speed: approx. 19 m/s Table height adjustment range: 240 mm Dimensions: see drawing no. 13 Weight: 300 kp New, wide belt grinding machine for sale, only used occasionally. Ready for immediate collection or testing.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 16,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 4,000 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (max.): 5,000 rpm, CNC SIEMENS 840 D WORKING AREA Longitudinal travel X axis: mm 16.000 Cross travel Z axis: mm 1.600 Vertical travel Y axis: mm 4.000 Rapid traverse rate: m/min 30 Axis acceleration: m/s² 2 Maximum axis thrust: N 16.000 WORKING TABLES No. 2 floor plates: mm 7.792 x 3.190 Rototranslating table: mm 3.000 x 2.992 Cross travel of rototranslating table: mm 2.500 Iiedpfx Anezipmps Nof Maximum load capacity at table center: Ton 60 SPINDLE Tool taper: ISO 50 DIN 69871 Spindle speed: Rpm 5.000 Power S1: kW 37 Power S6: kW 56 Maximum torque S1: Nm 1.295 Maximum torque S6: Nm 1.963 Usable low range: Rpm 0 – 1.145 Usable high range: Rpm 1.145 – 5.000 KOSMO 3 UNIVERSAL MILLING HEAD Positioning accuracy: ± 0.002° Maximum torque on rear plane: Nm 15.600 Maximum torque on front plane: Nm 11.000 Lubrication and cooling: Forced oil circulation Weight: kg 450 EQUIPMENT • Rueckle rototranslating table, size 3,000 x 2,992 mm, cross travel 2,500 mm, maximum load capacity at table center 60 tons, equipped with double preloaded pinion system; • Vertical axis designated as Y and cross axis designated as Z; • Remote electronic handwheel; • Automatic universal bi-rotary milling head “KOSMO 3 5000”, 5,000 rpm, ISO 50, indexing 0.02° on the front plane, continuous C-axis (hydraulic clamping) and 1° Hirth coupling on the rear plane, oil recirculation lubrication system; • Horizontal extension, diameter 200 mm, length 600 mm, 4,000 rpm, ISO 50 taper, continuous C-axis (hydraulic clamping) and 1° Hirth coupling; • Continuous platform (C-axis) prepared for future installation of a 2-axis continuous milling head; • Automatic head changer for the above-mentioned heads (Kosmo head, horizontal extension and preparation for continuous head); • Head storage magazine for 2 heads (Kosmo head + horizontal extension); • Air conditioning unit for electrical cabinet; • Belt-type chip conveyor along X-axis complete with transverse conveyor, coolant tank and coolant pump; • High-pressure coolant system, 40 bar through spindle, complete with tank and paper filter system, DIN 69871 type B; • Chain-type tool magazine with 80 positions “MAC80”, ISO 50, with tool change capability in both horizontal and vertical spindle positions (maximum tool length 400 mm, maximum tool weight 20 kg); • Air blast through external spindle nozzle; • Renishaw NC4 laser tool presetting system; • Renishaw RMP60 workpiece probe; • Mobile operator cabin moving along vertical and horizontal axes; • Instruction manuals and CE Declaration of Conformity.

Condition: refurbished (used), power: 18.39 kW (25.00 HP), COSMEC, model SM 100 AUTOMATIC MULTI-RIP SAW Max. cutting height: 100 mm Feed chain width: 250 mm Max. saw blade diameter: 300 mm Saw blade bore: 70 mm + 2 keyways Main motor power: 25 HP (18 kW) Min. board length to be cut: 500 mm Adjustable feed speed Iisdpezf I Dljfx An Nof Machine in working condition, fully refurbished, with new plates on the feed belt.

Condition: used, Year of construction: 2025, Overview This roll-fed hot glue labelling machine was manufactured by ACMI (Italy). The Opera PRO 400 RF is designed for high-capacity beverage production lines, processing both cylindrical and shaped containers in glass or PET. It applies wrap-around OPP labels at very high speeds, ensuring excellent efficiency and reliability. The machine is equipped with modern features such as automatic label splicing, brushless motor-driven infeed screws, and remote assistance capability. It is currently available for sale. Technical data  - Capacity: Nominal 48,000 bph (max. mechanical speed: 58,000 bph) - Formats: Cylindrical and shaped containers, PET or glass, e.g. 500 ml PET round bottle (wrap-around OPP label) - Machine diameter: 1,320 mm - Pitch: 125.60 mm - Label type: Roll-fed OPP hot glue wrap-around labels (30–40 µm thickness, 30–175 mm height) - Platform rotation: Motorized belt (R version) - Main motor: Servomotor - Electrical connection: 400 V (+/-10%), 50 Hz, 3PH + N + PE - Conveyor height: 1,100 mm - Conveyor chain: Plastic flat-top 82.5 mm, thickness 4 mm - Low voltage controls: 24 V DC - Environmental conditions: 5–45 °C; altitude up to 1,000 m Iiodsxgik Aspfx An Nsf - Control cabinet: Stainless steel with integrated air conditioner - Standard lubrication: Centralized, manual - Additional features: Automatic label splicing, double reel support, quick-release platforms, detection device for fallen bottles, remote assistance

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 700 mm, table width: 6,000 mm, OPTIMIZING AND DEFECTING CROSS-CUTTING LINE CURSAL MOD. TRV 2000E 700 SX Line configuration: Iijdpfxsywdx So An Njf - Motorized roller conveyor 6000 x 760 mm - Chain feeder with singulator (buffer magazine) for boards from 4500 mm up to 6000 mm, capacity 6 boards - Optimizing and defecting cross-cutting saw Cursal mod. TRV 2000 E 700 SX - Roller feed system - Blade diameter 700 mm - Max feed speed 150 m/min - Cutting section 480 x 65 mm - Cutting section 530 x 30 mm - With chalk defect marking system - Year 2015 - Outfeed conveyor belt 5000 x 600 mm - Bilateral overhead ejector - N. 2 transfer conveyors for semi-finished parts (1 right + 1 left) - N. 2 accumulation roller conveyors (1 right + 1 left)

Condition: used, Year of construction: 2008, Format: 530 ?? 350 ?? 300 mm Speed: 1.500 Stapel/Stunde Power: NULL Net Weight: 4.500 kg Equipment: Feeder Conveyor: Solema Delta ST conveyor belt with index timer and accumulation feature Continuous Product Alignment: Active during transport Turning Station: Programmable product rotation: 90?? left/right and 180?? Pressure disc for product positioning during rotation Servo-motor driven with product gap creation function Pallet Elevator Platform: Roller surface platform Pallet Compatibility: Compatible with all standard pallet types Pallet Discharge: Motorized roller conveyor for stable discharge of complete pallets Automatic Pallet Magazine Capacity: Up to 6 pallets Flexibility: Handles various pallet types and dimensions Design: Compact footprint Automatic Interleaf / Sheet Feeder Programmable: Placement on empty pallets or between designated layers Requirement: Requires straight-cut, wrinkle-free interleaf sheets Reject / Emergency Ejection Station Stack Height Detection: Integrated photocells for monitoring stack height Quality Control: Detects and ejects non-compliant stacks to prevent counting errors and s Iisdpszpzw Tefx An Nef Control System User Interface: Windows-based touchscreen operation panel Job Memory: Recipe management to save and recall job settings Automated Changeover: Automatic format changeover via servo mot Pallet Discharge System Conveyor Type: Motorized chain conveyor (length corresponds to one pallet size) Discharge Height: Approx. 130 mm above pallet height

Condition: like new (used), Year of construction: 2022, functionality: fully functional, 1. Centering table CPRC-600, length 1.2 m - Length: 3 m - Two feed speeds (working and return) - Two centering arms - Pneumatic pressure 2. Multi-blade saw type RP-500-G, max. cutting height 160 mm - Saw shaft drive motor 55 kW, feed motor 2.2 kW (stepless speed adjustment - inverter) - Chip collection conveyor belt - Strong lateral pressure rollers for offcut removal - Automatic feed regulation - Automatic bearing lubrication - Maximum number of circular saw blades on shaft: 15 pcs (Ø 450 x 70) - Maximum thickness of cut material (cant): 160 mm - Minimum thickness of cut material: 50 mm - Minimum length of cut material: 1.2 m - Lower drive shafts: 6 pcs - Upper extraction: automatic pneumatic chip extraction, extraction socket Ø 250 mm - Lower chip extraction + belt + extraction diffuser Ø 200 mm, portable control panel - Machine length: 2100 (2600) mm - Machine width: 2080 mm - Machine height: 1800 mm - Machine weight: 2200 kg - Machine’s productivity: 6-10 m³/h - Machine does NOT include saw blades - Power consumption approx. 62 kW 3. Outfeed conveyor DPTOZ-100 for ripped boards - Length: 4 m - 2 cross chains 4. Cross chain conveyor for sorting and picking boards - Width: 1 m - Length: 2.5 m Ijdpsynkgiofx An Noif Very little used. Like new. TOP condition.

Condition: good (used), Year of construction: 2002, machine/vehicle number: 0204231, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, height adjustment type: electric, total length: 4,800 mm, total width: 1,500 mm, Kuhlmeyer ZBS 2 Grinding Machine / Belt Grinder – Year of Manufacture 2002 – Industrial Version For sale is a robust and powerful grinding machine, type Kuhlmeyer ZBS 2, built in 2002. This machine is manufactured in Germany and is specifically designed for industrial use in metalworking. Isdpfsyvrtzjx An Njif Technical Data: Manufacturer: Kuhlmeyer Maschinenbau GmbH Type: ZBS 2 Year of manufacture: 2002 Machine No.: 0204231 Connection voltage: 400 V Control voltage: 230 V Connected load: 6.5 kW Rated current: 16 A Frequency: 50 Hz Compressed air: 6 bar Weight: approx. 2,500 kg Description: The Kuhlmeyer ZBS 2 is a heavy-duty industrial belt grinder, ideal for grinding, deburring, and finishing metal components. Thanks to its sturdy construction and high own weight, the machine runs extremely smoothly and enables precise processing results, even on larger workpieces. Features & Equipment: - Massive, long-lasting construction - Suitable for continuous operation - Pneumatic components (6 bar required) - High grinding capacity with 6.5 kW drive - Made in Germany – proven industrial quality Condition: Used, fully functional. Age- and use-related signs of wear are present, but technically ready for operation. Areas of Application: - Metal fabrication - Stainless steel processing - Grinding and finishing work - Industrial and workshop use Other Information: Viewing by appointment possible. Loading can be assisted. All information without guarantee. Subject to prior sale.

Condition: excellent (used), Year of construction: 2005, For sale is a used HUNDEGGER SC1 machine for processing prefabricated house elements. Year of manufacture: 2005 Automatic feeding system with transport chains, for workpieces up to 10 m in length. Saw blade diameter: 650 mm Minimum workpiece length: 800 mm Waste conveyor belt Iijdpfozda E Tex An Njf Drilling unit with quick-change system, vertical Milling unit, vertical Turret milling unit for 4-axis machining Available from October 2026 In very good condition.

Condition: not inspected (used), 7m x 1000mm thermal oil fryer with top hold down belt. Has come from factory producing chicken burgers and nuggets for major fast food chain. 7m frying length, 1000mm belt width. Ijdpfoigruysx An Njif

Condition: new, Year of construction: 2023, functionality: fully functional, QATM Qcut 500 A Precision Cut-Off Machine Manufacturer: QATM / ATM Qness GmbH Type: Qcut 500 A Year of Manufacture: 03/2023 Machine Type: Automatic Metallographic Cut-Off Machine Condition: New / unused Cutting Disc Diameter: up to 508 mm (20") Drive Power: 15 kW S1 For sale is a new and unused QATM Qcut 500 A precision cut-off machine, manufactured in 2023, with extensive equipment, a belt filter system, and an extraction system. The machine is particularly suitable for the precise cutting and sectioning of samples in metallography, material and component testing, quality assurance, research and development, as well as for industrial laboratory and testing applications. Ijdpfxezt N Rve An Njif The machine is additionally equipped with the option "Laser alignment aid for easy positioning of the workpiece." Technical Data: Manufacturer: QATM / ATM Qness GmbH Type: Qcut 500 A Year of Manufacture: 03/2023 Country of Manufacture: Germany Power Supply: 400 V / 50 Hz Connected Load: 30.0 kVA Fuse Rating: 32 A Drive Power: 15 kW S1 Cutting Disc Diameter: up to 508 mm (20") Speed at Ø 508 mm: 1000 – 2400 rpm Cutting Disc Arbor: Ø 32 / 40 mm Max. Sample Size at Ø 508 mm: 190 mm Max. Sample Weight: approx. 400 kg incl. clamping device Travel X-axis: 420 mm Travel Y-axis: 280 mm Travel Z-axis: 200 mm Positioning Accuracy Z-axis: 0.1 mm Working Speed X-/Y-axis: 0.001 – 50 mm/s Rapid Traverse X-/Y-/Z-axis: 80.0 mm/s Compressed Air Connection: 6 bar (± 2 bar) Noise Emission: max. 62 dB(A) at idle Operating Hours according to Display: 5 h 47 min Software Version: V 4.30 Belt Filter System: Manufacturer: QATM / ATM Qness GmbH Type: Belt Filter Automatic 285 Year of Manufacture: 03/2023 Belt Filter Type: UR 1030 Belt Filter Year of Manufacture: 2022 Rated Voltage: 3 × 400 V / N / PE, 50 / 60 Hz Rated Current: 100 mA Rated Power: 83 VA Dimensions: Machine Dimensions: approx. 1300 × 1820 × 1250 mm (W × H × D) Table Size without Z-axis: 700 × 500 mm Table Size with Z-axis: 550 × 500 mm Table Plate: Stainless Steel T-Slot Width: 12 mm Machine Weight: approx. 1000 kg Equipment: Option: Laser alignment aid for easy positioning of the workpiece Touchscreen control panel X, Y, and Z-axis control Joystick operation Stainless steel work table with T-slots Enclosed work area with viewing window Coolant nozzles QATM Belt Filter Automatic 285 Belt Filter UR 1030 Filter mist extraction system Coolant / filter unit Tools and clamping accessories according to images Piping and connection accessories according to images Operating manuals and documentation according to images Further accessories according to images Transport Data: Machine Weight: approx. 1000 kg Shipping by freight forwarder possible. Condition: New / unused. Year of Manufacture 2023. The machine has not been used in production. Operating hours according to display: only 5 h 47 min. Very well-maintained optical condition according to images. Display and control are shown as functional. Nameplates are present. Scope of Delivery: 1 × QATM Qcut 500 A Cut-Off Machine 1 × QATM Belt Filter Automatic 285 / Belt Filter Unit Filter mist extraction system Laser alignment aid Tools and clamping accessories according to images Piping and connection accessories according to images Operating manuals and documentation according to images Further accessories according to images. Scope of delivery as shown or described. Subject to changes, errors and prior sale.

Condition: used, functionality: fully functional, SANDING MACHINE Line composition: - 2 motorized loading rollers Dimensions: 2100 x 3300 mm - Roller conveyor for loading on lifting table Dimensions: 2100 x 3300 mm - Hydraulic lifting table Capacity: 6000 kg Dimensions: 2100 x 3300 mm - Suction cup panel loader - Roller conveyor with drive rollers - Imeas 2100 Panel Sander - 2 offset sanding rollers - Sanding roller power: 90 kW + 90 kW - Drive roller power: 9 kW Ijdpfx Anewzlnpe Neif - Thickness adjustment unit power: 3 kW - Minimum sanding thickness: 3 mm - Maximum sanding thickness: 60 mm - Abrasive belt tensioning and centering unit - Outfeed roller conveyor Width: 2100 mm – Length: 4000 mm For inspected sanded panels - Extraction roller group - Lifting table for pack assembly Capacity: 6000 kg Dimensions: 2100 x 3300 mm - Pack outfeed chain conveyor Dimensions: 3000 x 6000 mm

Condition: excellent (used), Year of construction: 2008, operating hours: 50,236 h, functionality: fully functional, travel distance X-axis: 2,360 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 9,000 rpm, For sale is a 6-axis machining center from AXA, model VHC 2-2360-XTS / 50. The machine is in good condition and fully functional, has only been used for light machining such as aluminium. Of particular note: Each of the two NC tables allows clamping of workpieces up to Ø1,100 mm – see drawing. A fixed milling table can also be mounted. A high-speed spindle insert SK50 is available for this machine. Technical data: Year of manufacture: 2008 Controller: Heidenhain iTNC 530 Machine on: 50,236 hours Spindle hours: 16,319 X-axis: 2,360 mm Y-axis: 600 mm Z-axis: 800 mm Spindle taper: SK 50 Spindle power: 56 kW Torque: 355 Nm Tool changer: 52 positions on 2 chains NC rotary tables (2 pieces) Type: SKH-NC 7/T Table plate: Ø 630 mm Max. load: 750 kg Clamping: Hydraulic Dimensions: 5,650 mm x 3,700 mm x 3,200 mm Isdpfjyi Er Aex An Noif Weight: approx. 22,000 kg Equipment: IC coolant system with 50 bar high-pressure pump, belt filter, Heidenhain RCN 729 measuring system, 3D probe Renishaw OMP 60, electronic handwheel, 2x Visiport (inspection windows), chip conveyor. Tool holders are not included in the offer, but can be supplied at additional cost. Transport and loading can be organized throughout Europe on request for an additional fee. Prices are subject to VAT. Inspection possible by appointment. Please contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery purchase and sales – BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine? For further information or to contact us, please visit our website.

Condition: good (used), Year of construction: 1989, functionality: fully functional, For sale is an OTT Alpha wide belt sanding machine in a robust industrial design. This machine is ideally suited for calibrating and fine sanding solid wood, veneer, MDF, chipboard, and other wood-based materials. The proven OTT technology impresses with its stable construction and reliable sanding results. Manufacturer: OTT Iedpfxjzrnlvj An Neif Type: Alpha 110 Wide belt sanding machine Calibrating and fine sanding machine Robust industrial design Dimensions in mm: 1860W x 1970D x 2100H 1100mm working width Max. workpiece thickness 1600, min. 3mm Sanding belt 2150 x 1120mm 4 + 8 m/min feed rate 11 kW motor 10 liters/min Weight: 2500kg Feed belt with rubber pad Sanding unit with wide belt Pneumatic belt tensioning Pneumatic sanding shoe control Control panel with clear machine control Ammeter for load monitoring Pressure gauges for pneumatics Emergency stop switch Large maintenance doors for easy service access Integrated dust extraction connections Solid machine construction for low-vibration operation Ideally suited for: Carpentry shops Joinery shops Furniture manufacturing Interior finishing Door and window manufacturing Series and single-piece production Condition The machine is in used condition with age-related signs of wear. It comes from a carpentry shop and impresses with its robust industrial quality. Inspection and trial run are possible at any time by appointment. Transportation is possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, intermediate sales and changes reserved. All information without guarantee.

Condition: used, Year of construction: 2016, Industrial automatic edge banding machine SOLUTION XD KEY FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: A SINGLE "TOUCH" IS ALL IT TAKES TO OPERATE THE MACHINE STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand version for edge banding of roll material and strip edges with all conventional hot melt adhesives. The base frame consists of a stable steel welded frame with higher rigidity, which provides optimal support for the installation of the processing units. The upper pressure beam consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned according to the panel thickness. Height adjustment with display on the upper pressure beam and on the operator panel. Manual workpiece feeding system with a large-sized work area and increased support surface facilitates the feeding of large workpieces. Adjustable infeed fence for two positions with automatic selection for processing with or without a pre-milling unit. Upper working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal support for precise referencing to the panel. All high-frequency motors are operated via frequency inverters. Each unit is equipped with its own inverter for optimal flexibility and improved machine production times. Protective hood for all units positioned after the glue application unit. Polycarbonate windows ensure a good view of the units during processing. Interior lighting of the hood. Protective hood with sound-absorbing material for lower noise emissions during operation. Spacer on the infeed fence allows the machine to be fed with the correct spacing. The spacing is automatically adjusted to the selected feed rate. Dust extraction port arranged on the pivoting control panel, positioned in the infeed area, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal housing, attached to the machine frame and equipped with doors for easy access in case of maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide chain plates made of rubberized nylon, for optimal guidance and high load capacity. The chain slides on 2 guides made of hardened and ground steel, one round and one flat guide, to guarantee straight feed and to protect against lateral displacement. Automatic chain lubrication. The amount of lubricating oil is optimized by the control system depending on the panels being processed. External support roller track positioned along the entire length of the machine; consisting of an extendable opening system up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of the main functions of the machine. Includes: – Processing of programs in Just in Time mode – Possibility of management via bills of materials – Possibility of management by Iodpfx Anjxy Tm Is Nsif

Condition: used, Conveyor belt, belt conveyor, timing belt conveyor, small parts conveyor, flat belt conveyor, belt conveyor GEPPERT type GAL 25 Serial No. 1009078 Year of manufacture: 2010 Usable length: 700 mm Iisdpsx R Ehzefx An Nof Belt width: 60 mm Belt length: 1520 mm Frame profile height: 50 mm Return roller diameter: 50 / 26 mm Belt speed: 26 m/min Motor power: 0.09 kW Power supply: 400 Volt, 50 Hz - Driven by geared motor with chain - Height-adjustable stand from 660 to 1000 mm belt height - Conveyor belt inclination adjustable Overall dimensions (L x W x H): 750 x 400 x 660 mm Weight: 21 kg Very good condition

Year of construction: 2018, condition: used, - Robot axes: 6 - Reach: 4683 mm - Payload: 1700 kg Industrial robot with conveyor system and safety fence Manufacturer: Fanuc Type: M-2000iA/1700L Year of manufacture: 2018 Isdszuz Icjpfx An Njif Technical data - Robot axes: 6 - Reach: 4683 mm - Payload: 1700 kg Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: new, Year of construction: 2025, Engine 15 kW Splitting pressure 30 tons Automatic saw yes Maximum log diameter 500 mm Maximum log length 500 mm Feed hydraulic (length x width) 1800 x 390 mm Maximum lifting height when splitting 230 mm (hydraulic) Saw and feeder control hydraulic Joystick control Iisdpfx Asv Dvkzsn Njf Conveyor with winch 3.5 m length / 300 mm width Chain saw 24" Saw speed 10000 rpm Cylinder diameter 4.5 " Cycle time 6 seconds 6-arm splitting wedge Oil flow 50 l / min. Hydraulic oil capacity 40 L Ball hitch 50 mm Wheels 22x11-10 ATV Weight 1000 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.5 m long belt feeder that can transport processed wood directly to the trailer The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type of wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: new, working width: 125,000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Iiodpfx Aeyix Haon Nsf Seppi M. H7 125 Flail Mulcher / incl. floating linkage / NEW equipment / in stock & immediately available Price: €13,890.00 net / €16,529.10 gross - Working width: 125 cm - Overall width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg - Mulches grass and light brush up to 7 cm Ø - Suitable for excavators from 5 to 15 tons - Universal interface for mounting various adaptor plates - S420: double-walled housing made of high-strength S420 steel - WEARPLATE: housing with replaceable wear plates - LOW PROFILE: low profile design - Indirect V-belt drive with 4 belts - Drive prepared for hydraulic motor depending on the carrier’s oil flow - 4D ROLLER: reinforced support roller, 152 mm Ø, with double-taper roller bearings, height-adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front guard with chains - Rear guard made of rubber - Color: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pieces, part number 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement, 29-58 cm³, and overpressure valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 100 - 300 - Required hydraulic oil flow in l/min (min-max): 55 – 150 OPT 099 Floating linkage (parallelogram guidance) OPT 555 Pendulum adaptor Three hydraulic lines are required: supply, return, and leakage oil. Optional: MS08 adaptor plate incl. bolts and installation = €750.00 net Multiple other adaptor plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of different Seppi M. products in our warehouse, all ready for immediate delivery! Mr. Herden (phone) will be happy to assist you. Financing offers available upon request. We are an official distribution and service partner for Westtech. We are an official distribution and service partner for OilQuick. We are an official distribution and service partner for Holp. We are an official distribution and service partner for Magni telehandlers. We are an official distribution and service partner for DMS. We are an official distribution and service partner for Gierking GMT. We are an official distribution and service partner for Weber MT. We are an official distribution and service partner for Seppi M. We are an official distribution and service partner for JCB construction machinery. We are an official distribution and service partner for Mercedes-Benz. We are an official distribution and service partner for Iveco. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Subject to errors and prior sale! = Further information = Intended use: agriculture Please contact Marius Herden for more information.

Condition: used, Year of construction: 2006, Format: 0x0 Equipment: Infeed:Solema Delta ST conveyor belt with cycle memory and accumulation featureContinuous product alignment during transport Turning Station:Programmable product rotation: 90?? left/right and 180??Pressure disc for product positioning during rotationServo-motor controlled with product gap creation function Pallet Elevator:Roller-surface platformCompatible with all standard pallet typesMotorized roller conveyor for stable discharge of complete pallets Automatic Pallet Magazine:Capacity: 6 palletsFlexible pallet type and dimension handlingCompact design Automatic Interlayer Feeder:Programmable: placement on empty pallet or at defined layersStraight-cut, wrinkle-free interlayers required Reject Delivery:Integrated stack height control cellsNon-compliant stacks are detected and ejected to prevent counting errors and stack instabilityPrevents faulty stacking before palletizingManual ope Control System:Windows-based touchscreen operating interfaceProgram memory for saving and retrieving jobsAutomatic format changeover via servo motorsNew job data can be loaded while the machine is run Isdszpzw Hepfx An Njif Pallet Discharge System:Motorized chain conveyor (length corresponds to one pallet)Discharge height: approx. 130 mm above pallet height

Condition: used, functionality: not functional, total length: 5,150 mm, total width: 130 mm, total height: 1,800 mm, overall weight: 1,200 kg, Heudra auger pump with conveyor belt. This system can be used for the disposal of, for example, fruit waste. The substance is fed onto the conveyor belt, which then transports it to a hopper. From the hopper, the substance is pumped away by an auger pump. The machine is entirely made of stainless steel; the conveyor belt is made of plastic. Dimensions (w x l x h): 130 x 515 x 180 cm Dimensions of conveyor belt: 70 x 300 cm Dimensions of hopper: 80 x 60 x 90 cm deep The control panel for the motors is included, but the control system is missing. Iisdpfx Anjzuyzbo Njf

Condition: used, Year of construction: 2007, machine/vehicle number: MR006928, Robust and precise wide belt sander with a working width of 1,100 mm. In good condition and ready for immediate use. This Kündig Premium-2 is a robust and precise wide belt sander, equipped with two sanding units: a calibration roller for efficiently sanding solid wood and sheet material to size, and a sanding shoe for a fine, uniform finish. This sander is in good condition and ready for immediate use. Technical specifications: - Number of sanding units: 2 - Sanding unit 1 type: Calibration roller - Sanding unit 2 type: Sanding shoe - Maximum sanding width: 1100 mm - Maximum working height: 200 mm - Minimum working height: 3.5 mm - Feed rate: 3 - 15 /min - Sanding belt length: 2000 mm Iijdpfxjzh Hixe An Njf - Sanding belt width: 1120 mm - Serial number: 26453

Condition: used, Year of construction: 2008, operating hours: 4,300 h, overall weight: 16,000 kg, grinding belt speed: 14 mm/s, grinding belt length: 2,620 mm, grinding belt width: 2,000 mm, Calibrating and sanding machine, width: 2000 mm, equipped with: Ijdpezk S Ncofx An Noif 1 belt with steel roller for calibrating 1 belt with CSD pad for finishing sanding 1 belt with CSD pad for finishing sanding