Used Chain Transporters for sale (18,665)

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Ndedez En Axopfx Aazsb Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Year of construction: 2024, condition: refurbished (used), functionality: fully functional, FERAG UTR-JV-KO chain for transporting printed products in the mailroom UTR-RV, UTR-JV, MSD clamps, LAT clamps, etc. also available... Njdpfx Aaetk S Dyozsdb

Condition: good (used), Long link roller chains, transport chain, roller chain, drive chain -Chain length: 10 m Ndsdpfxsd Tih Re Aazsb -Pitch: 200 mm -Intermediate dimension: 48 mm -Dimensions 1200/1000/100 mm -Weight: 176.5 kg

Condition: good (used), Long link roller chains, transport chain, roller chain, drive chain Njdpfx Aasd Tih Tozsdb -Chain length: 9600 mm -Pitch: 200 mm -Intermediate dimension: 48 mm -Dimensions: 1140/920/100 mm -Weight: 166.5 kg

Condition: good (used), Long link roller chains, transport chain, roller chain, drive chain -Chain length: 10.4 m -Pitch: 200 mm -Intermediate dimension: 48 mm -Price: per piece -Number: 2 pieces -Dimensions: 1140/960/100 mm Ndodpfxjd Tih Ne Aazeb -Weight: 180 kg/piece

Condition: used, Long link roller chains, transport chain, roller chain, drive chain Ndjdpfx Aajc Ibyqjzsb -per chain length: m -Pitch: 160 mm -1x chain: 5.1 m available -Weight 60 kg -1x chain: 3.5 m available -Weight 45 kg -2x chain: 9.92 m available -Weight: 81.5 kg/pc. -Price: 55 Eur/m -Weight: 9.5 kg/m

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approximately 60,000 packs (approximately 40 operating hours) processed during the trial run! For sale is an absolutely like-new, high-end thermoforming packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was purchased in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in the cleanroom, dust-free • Operating hours: Only approximately 60,000 individual packs (equivalent to approximately 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approximately 700 cm x 140 cm x 230 cm (including discharge conveyor) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: no compressor included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides a highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format layout: 4 lanes side by side / 1 row (pp. 13-14) • Actual cavity inner dimensions per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimensions (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (mold plate type 5, directly water-cooled) (pp. 14-15) • Infeed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (included!) • Integrated printer: MULTIVAC MR293 HP/TT in-line direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers, and expiration dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge conveyor: High-quality Intralox discharge conveyor (800 mm) with a blue Intralox chain and its own frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection bars installed on the tool side for packaging under modified atmosphere are available. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic wiring diagrams in German included in the scope of delivery (pp. 19-20). 💰 Price € 39,900,- net, excluding VAT. • Shipping costs: Available upon request, throughout Europe • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT, ex wareh Ndjdpfx Ajzwgxrsazjb

Condition: excellent (used), Year of construction: 2023, Hebrock F 4, excellent condition, year of manufacture 2023, used. For complete processing of your panels. For those who don’t want to compromise. With the F 4, we offer you a model that allows you to produce fully processed edges with a machine length of only 4 meters. The F 4 is not only space-saving but also offers an excellent price-performance ratio. Max. edge thickness 3 mm Min./max. workpiece thickness 8 – 50 mm Min. workpiece length approx. 160 mm Feed rate approx. 7 m/min. Ready for operation in approx. 3.5 min. Max. power consumption approx. 7.4 kW Ndjdpfx Aaez Eubnozjb Electrical connection 400 V – 3-phase – 50 Hz Work table height approx. 900 mm Machine dimensions approx. 4050 x 1300 x 1400 mm (L x W x H) Weight approx. 820 kg Dust extraction port Ø 1 x 140 mm PLC control with 10″ touchscreen Top-mounted quick-heating glue tank (maintenance-free) Support plate for edge material Automatic central lubrication (miter saw, corner router) Optical display for workpiece sequence Outrigger (extendable to the front) Quick-change unit incl. glue change device for PUR processing Surface scraper with dual sensing Pneumatic roller trimming (scissor-cut design, Hebrock system) Double-roller pressure (ball-bearing mounted) Transport chain with permanently screwed special chain plates Edge router Routing unit Miter saw Corner router Change motor for corner router Chassis Nesting for routing station and radius scraper Pneumatic 3-point adjustment Accessories: F4(08/4 quick-change unit for corner router F4/08/5 change motor for corner router F4/09 radius scraper (incl. pneumatic lift) F4/09/4 multi-radius scraper (R1/R2) F4 chassis F4 nesting for routing station and radius scraper F4/30 pneumatic 3-point adjustment Location: In stock, 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge and electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: P300 PROFI Crane System Year of manufacture: 2020 Machine type: Two-rail portal crane / workshop crane Description For sale is a used VETTER PROFI crane system, type P300, in a robust two-rail portal design with crane bridge, manual trolley, and electric chain hoist. The system was designed for industrial workshop operation and is ideally suited for assembly, production, mechanical engineering, maintenance, logistics, and material handling. The design complies with the crane classification HC2 / S2 according to EN 15011 and has a load capacity of 1,600 kg. Documentation, test book, and conformity documents are available. Technical data of the crane system Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Load capacity: 1,600 kg Crane classification: HC2 / S2 according to EN 15011 Operating mode: Workshop crane Control: Floor control Mounting: Composite anchor system Span: 5,100 mm Support spacing L: 5,590 mm Support spacing B: 5,100 mm Overall dimensions of the system: approx. 6,040 x 5,800 mm Beam length: 6,170 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of portal beam: 4,567 mm Overall height: 4,905 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Steel structure group: 18/36/30 Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW Drive group: FEM 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Operating voltage: 400 V 3 PH / 50 Hz Control voltage: 24 V Manual trolley / travelling carriage Type: SiCO-HF 2000 A Design: Manual trolley Beam width: 66 - 220 mm Load capacity: 2,000 kg Self-weight: 17 kg Equipment - Two-rail portal crane system - Crane bridge - Electric chain hoist SIXX8AF - Manual trolley SiCO-HF 2000 A - Load hook - Floor control - Mains connection switch - Steel supports and beam structure - Composite anchor system - Documentation available - Test book available - EC declaration of conformity available Transport data Longest component: approx. 6.2 m Heaviest individual component: approx. 300 kg Total weight of the system, based on experience, approx. 2,000 - 3,500 kg Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Logistics Material handling Condition Used, functional, dismantled from ongoing operation. Optical condition according to pictures. Test book and technical documentation available. Ndedpfx Aaezgtzljzeb Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF 2000 A Support and beam structure Floor control Mains connection switch Test book EC declaration of conformity Documentation Accessories according to pictures (Changes and errors in the technical data are subject to change.) Subject to prior sale.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of Manufacture: 2020 Machine Type: Two-rail gantry crane / crane system Load Capacity: 1,600 kg For sale is a used VETTER P300 PROFI crane system with crane bridge, manual trolley, and electric chain hoist. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, and general lifting and transport tasks in the industrial sector. Technical Data Span of Crane Bridge: 5,890 mm Support Distance L: 5,570 mm Support Distance B: 5,890 mm Length of Runway Girder: 6,150 mm Length of Cross Girder: 6,260 mm Overall Dimensions of System: approx. 6,590 x 6,590 mm Bottom Edge of Crane Bridge: 4,085 mm Bottom Edge of Portal Girder: 4,507 mm Overall Height: 4,905 mm Ceiling Height according to Drawing: 5,185 mm Operating Voltage: 400 V / 50 Hz Control Voltage: 24 V Classification: HC2 / S2 according to EN 15011 Steel Construction Group: 18/36/30 Electric Chain Hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of Manufacture: 2020 Load Capacity: 1,600 kg Lifting Speed: 4.0 / 1.0 m/min Power: 1.50 / 0.37 kW FEM: 2m / M5 Protection Class: IP55 Duty Cycle: 40 % Number of Load Chains: 2 Weight with 5 m Lift: 65 kg Manual Trolley Type: SiCO-HF 2000 A Load Capacity: 2,000 kg Girder Width: 66 - 220 mm Weight: 17 kg Equipment Crane Bridge Electric Chain Hoist SIXX8AF Manual Trolley SiCO-HF 2000 A Load Hook Floor Control Main Disconnect Switch Cable Festoon / Power Supply Steel Support and Girder Structure Inspection Book Available EC Declaration of Conformity Available Assembly and Operating Instructions Available Transport Data Longest Component: approx. 6.3 m Heaviest Single Component: approx. 300 kg Total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition according to pictures System was installed and in operation Inspection book and documentation available Scope of Delivery VETTER P300 PROFI Crane System Crane Bridge Electric Chain Hoist SIXX8AF 1.6 t Manual Trolley SiCO-HF 2000 A Nedpfx Aaszgvx Tezedb Support and Girder Structure Control / Operating Elements Main Disconnect Switch Documentation / Inspection Book EC Declaration of Conformity Assembly and Operating Instructions Accessories as Shown in Pictures The machines, tools, and other items visible in the pictures that are not explicitly described are not included in the scope of delivery. Shipping or freight transport possible. Subject to changes, errors and prior sale.

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: 1572, functionality: fully functional, operating hours: 5,500 h, power: 55 kW (74.78 HP), cutting height (max.): 1,000 mm, cutting width (max.): 1,200 mm, control type: PLC-controlled, overall weight: 20,000 kg, Complete Mebor wood sawing line Included: - HTZ 1200 Plus, maximum sawing length 9m, Optifast 10 control system - multi-blade VR 900 with 3 movable heads - MLD Logdeck log loader Njdpfx Aajz Eadbszodb - 2x RCM 800 with left/right sorting - 2x CCP transport chains All in good condition, available for inspection in working order.

Condition: repair required (used), Year of construction: 2009, functionality: limited functionality, machine/vehicle number: 305484, saw blade diameter: 450 mm, cutting height (max.): 160 mm, feed length X-axis: 2,000 mm, cutting range round steel at 45°: 150 mm, cutting range round steel at 90°: 150 mm, type of input current: three-phase, cutting range square steel at 45°: 140 mm, cutting range square steel at 90°: 140 mm, CNC cold saw from the renowned brand Kaltenbach, model KKS 401 NA 2000. There is a lot of information to provide, so I have posted several pictures with basic details to give you an overview of the saw's capabilities. It is a rare model with a feeder (single piece) of 0-2000mm, as well as repeat cutting of 2000-9999mm. Automatic zeroing before cutting. CNC saw head with automatic rotation of +/-60 degrees, 2 types of lubrication, emulsion, and direct spray. Option to direct the cut piece to an ejector for small pieces, as well as a chain ejector with a function for lowering longer and heavier pieces. I haven't included this in the pictures as it is not installed, but the saw also comes with a set of protective guards with safety barriers and a large number of spare parts. The complete documentation is original and is linked to the machine's serial number, making installation easy and straightforward. Nodpfjyk Inpjx Aazsdb Problem explanation: the saw is connected to the electrical power supply, and each individual function (and there are many) is fully operational. The problem arises during automatic operation; the most likely cause is the program parameters themselves (it uses the Windows platform). I haven't been able to find a suitable programmer who can learn on my machine. Possible solution: I contacted the saw manufacturer, and they directed me to their authorized service provider, so I have their contact information, which I can provide to the future buyer. The estimated cost of repair in Serbia is between 3000-5000 EUR. If you are closer to Germany or the Czech Republic, this cost will be significantly lower. So, there are two price categories: if you buy the machine in its current condition, the price is as advertised. If I resolve the problem, the price will be considerably higher. The advertised price includes professional dismantling and loading onto a truck (a rather important, and not inexpensive, item). Transportation is at the buyer's expense. I hope I have clarified the current condition of the machine. Due to a change in business activities, the saw is surplus to production. Happy shopping!

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 0-250-43-0070, functionality: fully functional, operating hours: 2,731 h, power: 10 kW (13.60 HP), input voltage: 300 V, input current: 32 A, year of last overhaul: 2026, Equipment: documentation/manual, 3-AXIS (X-Y-Z) CNC MACHINING CENTER Movable table (workpiece), movable machining head Vertical table (workpiece) Cec Ard Uoyywcvspnjrd Control system: POWERCONTROL + POWERTOUCH Software: woodWOP Safety cabin for the machining head No. 1 locking system for workpiece clamps in the working area Workpiece drive with transport chain Minimum workpiece dimensions (X-Y-Z) mm 200 x 70 x 12 Maximum workpiece dimensions (X-Y-Z) mm 3050 x 850 x 60 Total connected power (kW): approx. 11.5 WORKING GROUPS: No. 1 drilling unit (Power (kW) 2.3) with vertical spindles: - No. 13 independent vertical drilling spindles (V13 High Speed) - No. 6 independent horizontal drilling spindles (4 in X + 2 in Y) No. 1 grooving saw unit (for operations in the X-axis) diameter (mm) 100 No. 1 vertical main spindle (milling unit) HKS63 (Power kW 5) Ndedpjzi Ul Refx Aazob Automatic tool changing system - magazine positions (No. 4 tool positions)

Condition: good (used), Year of construction: 1985, Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Steel, electric chain hoist with chassis -Chain hoist: Type T 302 L, load capacity 500 kg Njdszt Rvajpfx Aazsdb -Main stroke: 4 m/min -Fine stroke: 1 m/min -Hook path: 5 m -Crane chassis: Maximum beam width 135 mm Dimensions: see photo and technical drawing -Transport dimensions: 600/550/H420 mm -Weight: 49 kg

Condition: used, Year of construction: 2015, operating hours: 9,014 h, * Radio * On-board computer * Rear view camera * Driver comfort seat * Seat heating Ndsdpfx Aev H Ht Eeazeb * Air intake at the top * Exhaust behind the driver's cab * Central lubrication ----Structure: ROPS driver's cab fully glazed, touch screen monitor with color display. Liebherr 4-cylinder diesel engine D934A7, 7,014 cc, 129 KW/175 HP, Liebherr compact planetary gear with 2 speed levels (level 1-3.7 km/h, level 2-6.1 km/h). Adjustable boom, hydraulic quick-change system, 5 additional hydraulic connections. Transport dimensions read approx: 10,500x3000x3060mm (LxWxH), chain width approx. 750 mm, track width: 2,250 mm----Last service carried out in 02/24 at 8,022 hours Sale only to traders. ONLY THE NET PRICE IS TO BE PAID FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT + ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see imprint).

Condition: used, Year of construction: 2015, operating hours: 9,014 h, * Radio * On-board computer * Rear view camera * Driver comfort seat * Seat heating * Air intake at the top * Exhaust behind the driver's cab Ndedpfsv H Htlox Aazsb * Central lubrication ----Structure: ROPS driver's cab fully glazed, touch screen monitor with color display. Liebherr 4-cylinder diesel engine D934A7, 7,014 cc, 129 KW/175 HP, Liebherr compact planetary gear with 2 speed levels (level 1-3.7 km/h, level 2-6.1 km/h). Adjustable boom, hydraulic quick-change system, 5 additional hydraulic connections. Transport dimensions read approx: 10,500x3000x3060mm (LxWxH), chain width approx. 750 mm, track width: 2,250 mm----Last service carried out in 02/24 at 8,022 hours Sale only to traders. ONLY THE NET PRICE IS TO BE PAID FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT + ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see imprint).

Year of construction: 1972, condition: used, Electric chain hoist, crane, hall crane, assembly crane, hand trolley, rolling trolley, crane trolley, trolley trolley, crane trolley, crane trolley, trolley -Manufacturer: Steel, Elektus electric chain hoist with chassis and 380 V socket on the load hook -Electrical accessories: connecting cable/main switch/fuse box Neden R Tmkopfx Aazsdb -Chain hoist: Type R12 capacity 1250 kg -Main lift: 8 m/min -Fine stroke: 1 m/min -Chain length: 4.5m -Crane chassis: Girder width max. 175 mm -Dimensions: see photo techn. drawing -Transport dimension: 1200/720/H580 mm -Weight: 159 kg

Condition: excellent (used), DEMAG Chain Hoist Model PK 5 Load Capacity 1000 kg Lifting Height 4 meters Lifting Speed 7.5 meters/min. Overall Length 700 mm 380 Volt 1.4 kW Year of Manufacture 1967 Ndjdpey I Ulkefx Aazsb Condition is very good, only occasionally used. Can be tested on site. Transport Dimensions: Length 700 mm Width 400 mm Height 320 mm Weight 60 kg

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: 8107000021B, spindle bore: 32 mm, spindle speed (max.): 8,500 rpm, overall weight: 4,300 kg, controller model: FANUC 32i MB, bar length: 3,200 mm, DMG MORI GILDEMEISTER SPRINT 32/5 – Short/Long Turning Automaton Well-maintained machine, low operating hours, including IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016, as well as a conversion kit to a long turning automaton (Swisstype kit) for short and long turning on a single machine. Delivery terms: Free on truck Availability: Immediate - subject to agreement NOTE: The machine must be picked up on a fixed date in mid/late October 2026; we will provide the exact date in advance! Technical data: Control: FANUC 32i MB Operating hours recorded: 25,263 Spindle hours recorded: 22,772 MAIN SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z1: 100 mm Max. speed: 8,500 RPM Drive power S1: 5.5 kW TAILSTOCK SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z2: 200 mm Max. speed: 8,500 RPM Drive power S1: 2.2 kW AXIS DATA X1: Travel: 70 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² AXIS DATA Y1: Travel: 405 mm Max. speed: 30 m/min Max. acceleration: 5 m/s² AXIS DATA X2: Travel: 300 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² TOOL HOLDER DATA – SLIDE 1: Tool holder diameter: 25 mm Number of fixed tools for external machining: 6 Tool holder size: 16 × 16 mm Number of driven tools: 4 Collet type: ESX20 Nodpez A Tbusfx Aazedb TOOL HOLDER DATA – SLIDE 2: Number of fixed tools for internal machining: 4 Tool holder diameter: 25 mm Scope of delivery: IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016 Chip conveyor Available manuals Accessories as shown in the pictures Dimensions & Weight Footprint (L x W x H): approx. 7500 x 1600 x 2500 mm Weight: approx. 4300 kg Attention: Disc damaged! If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ► Upon request, we can offer transport to your destination. ► The goods are sold without any warranty. ► Technical data is subject to change.

Condition: good (used), functionality: fully functional, Year of construction: 2023, total height: 3,500 mm, total length: 12,250 mm, total width: 6,500 mm, load capacity: 100 kg, Used Yale single-girder crane system including a 100 kg hoist. The system is suitable for light to medium-duty internal lifting and transport applications in workshops, production environments, and warehouses. Technical specifications: Manufacturer: Yale Year of manufacture: 2023 Equipped with power conductors. Available span lengths: 12,250 mm (2x) Ndedpfx Aaoyyq Ilszeb Transverse girders / trolley beams: Length: 6,500 mm Quantity: 2 pieces (each span length has 1 trolley beam and chain hoist) As shown in the pictures / dismantled from service including photos. For more information, photos, or a price quote, please feel free to contact us. Price per piece, starting from €2,500.00. 2 x Yale.

Condition: good (used), Year of construction: 1992, Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Abus, electric chain hoist with driven chassis -Chain hoist: Abus type GM3- Load capacity 1000 kg -Main stroke: 5 m/min -Fine stroke: 1.3 m/min -Chain length: 3.5 m -Electric chassis: Abus S11148 34/153 rpm -Beam width: max. 310 mm Dimensions: see photo and technical drawing -Electrical accessories: Connection cable (see photos) -Transport dimensions: 450/780/H400 mm -Weight: 56 kg Ndedpfsy N Anpjx Aazsb

Condition: used, Year of construction: 2002, functionality: fully functional, We are offering this operational Hundegger K2-5 62.5 mm cutting machine, manufactured in 2002, for sale. The machine was reassembled at the new location by Hundegger in 2021. The safety features have been updated to the latest standards (€17,000) and the machine has been serviced. From 2021 to early 2022, the machine was completely rebuilt by Hundegger and approved for operation. The company declared insolvency in 2025 and the property was sold. Consequently, the K2, including the HEA 200 support beam and chip extraction system (pusher system), was completely dismantled in operational condition and removed from the site by Hundegger. Invoices for the K2 (2002), safety features, saw blade, milling heads, support blocks (2025), etc., can be provided upon request. The K2 was fully functional, preserved, and dismantled at the Hundegger site and is now in storage. Transport requires 2 semi-trailer trucks, approximately 28.5 tons. Loading can be arranged for approximately €4,000. Ndedpfxozrazcj Aazob Manufacturer: Hundegger Model: K2-5 625 Year of Manufacture: 2002 Condition: Operational Category ID: 156 Type ID: 2209 Machine Type: Cutting Machine - Undercarriage pivoting miter saw - Universal milling unit, 5-axis (UF5) - Roller cutter - Finger cutter - Dovetail cutter - Combination support for vertically operating tools - 1x Vertical finger milling machine, 5.5 kW - 2x Drilling unit, 2.2 kW Drilling unit, swiveling 30° (3.0 kW) - drilling direction horizontal - Combination support for horizontally operating tools - 1x Drilling unit, 2.2 kW - drilling direction horizontal - 1x Drilling unit, swiveling 30° (3.0 kW) - 1x Grooving unit, 7.5 kW Space available for an additional main unit. Control system: KI 2 – KI 3 Additionally, a cabinet with consumables such as lubricants, grease, and rollers is included. A new roller cutter, dovetail cutter, grooving chain, and replacement cutting inserts for the tools are available, as documented by an invoice for €3,800. All necessary documentation from Hundegger for the installation and operation of the machine is available.

Year of construction: 2021, condition: used, Conveyor belt, belt conveyor, transport belt, belt conveyor, chain conveyor, pallet conveyor, pallet conveyor for horizontal cartoner, packaging machine -Handover: in its current condition as inspected -Control/Drive/Cover: missing -Manufacturer: nomatech, Horizontal Cartoning Machine -Type: BOX 60H -Submission/Price: complete -Dimensions: 3100/1500/H1640 mm -Weight: 608 kg Ndedpfxox Nh Rve Aazjb

Year of construction: 1976, condition: used, Electric chain hoist, crane, indoor crane, assembly crane, push trolley, push trolley, crane trolley, trolley running gear, crane running gear, crane running gear, trolley -Manufacturer: Stahl, electric chain hoist with chassis and 380 V socket on the load hook Ndodpfen R Tm Dex Aazeb -Electrical accessories: connecting cable/main switch/fuse box -Chain hoist: Type R12 capacity 1250 kg -Main lift: 8 m/min -Fine stroke: 1 m/min -Chain length: 3.65 m -Crane chassis: beam width 165 mm, max. 215 mm -Dimensions: see photo techn. drawing -Transport dimension: 960/700/H630 mm -Weight: 155 kg

Year of construction: 2018, condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. The system was last used with AlSi10Mg aluminum powder. The 3D printer has already been dismantled by the manufacturer. Dismantling and functional reports are available, confirming the machine was operational prior to dismantling. Njdpfx Aozpvdzsazedb All axes have been professionally secured for transport. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture: 08/2018 Laser operating time Laser 1 "Beam on" time: 5,165 hrs Laser 2 "Beam on" time: 5,096 hrs Laser 3 "Beam on" time: 5,023 hrs Trumpf TruPrint 5000 including Powder Bed Monitoring and Melt Pool Monitoring options Filter system Accessories: 2x Build cylinders 3x Dosing cylinders 1x Overflow container (used) 1x Overflow container (NEW) Manuals 4x Heat exchangers (NEW) 2x Easy Filters (NEW) 3x NTRON SIL02 Oxygen Analyzer + Sensor (NEW) 1x Oxygen sensor (NEW) ...and much more, such as seals, etc. An Armanni CAR.Elev. pallet truck for changing containers is also in stock and can be offered as an optional extra. Get high-quality 3D components faster The TruPrint 5000—a high-productivity, semi-automated 3D printing system—prepares you for industrial serial production. With features such as optional 500°C preheating and a full-field multilaser configuration utilizing three 500-watt TRUMPF fiber lasers, you are ideally equipped for highly demanding industrial applications. The machine manufactures high-quality components from various metallic materials quickly and reliably, meeting the rigorous quality standards of tool and mold making—including via 3D printing onto preform blanks—as well as those of the aerospace and medical technology sectors. Optionally, the entire process chain—sieving, printing, cooling, and depowdering—can take place in a protective gas atmosphere. Combined with TRUMPF’s external part and powder management systems and monitoring solutions, it is ideally suited for industrial additive serial production. Thanks to the preform option, the TruPrint 5000 supports hybrid component production. In this process, the additive component structures are built directly onto a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduced if preheating >200 °C) Processable materials[1] Weldable metals in powder form, e.g., stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build rate[2] cm³/h 5 – 180 Layer thickness[3] μm 30 – 150 Max. laser power at workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 – 500 Min. measurable oxygen content ppm Up to