Used Circular Resaw for sale (1,500)

Condition: new, Year of construction: 2026, Aluminum circular saw UK 300 M, manual The UK 300 M is a manual table saw with simple, safe operation. Double miter cuts up to 45° right and left are possible with this machine. The miter adjustment is done here by turning the stop jaw. The UK 300 M has a compact design with clear operation. The saw cut Hnsdpeidqahjfx Abtsk is done manually from below into the material to be processed. The material is stretched manually. Fixed protection from the cutting area. equipment Compact, closed design with clear operation Manual clamping device Fixed protection from the cutting area Saw blade ø 300 mm Manual cutting feed Miter adjustment left 45º / 90º / right-45º degrees integrated manual length stop ideal for mobile use ideal for profile cuts workflow 1) Setting the cutting angle 2) Loading the material 3) manual clamping of the material 4) Press the start button to start the saw blade 5) the saw cut must be carried out manually with a hand lever 6) after the end of the cut, the machine is switched off! without base (optionally available) ! It is always possible for you to inspect the desired machine in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The UK-350-P is a manual table saw with simple, safe operation! Double miter cuts up to 45° right and left are possible with this machine. The miter adjustment is done here by turning the stop jaw. The UK-350-P has a compact design with clear operation. The saw cut is made manually from below into the material to be processed. The material is clamped pneumatically. Fixed protection from the cutting area. Hnedpfxegcbuws Abtsk

Condition: new, Year of construction: 2026, Aluminum circular saw UK 300 P, manual The UK 300 P is a manual table saw (pneumatic clamping) with simple safer Service! Double miter cuts up to 45° right and left are possible with this machine. The miter adjustment is done here by turning the stop jaw. The UK 300P has a compact design with clear operation. The saw cut is done manually by down into the material to be processed. The material is clamped using two pneumatic clamping cylinders. Furthermore, this model is equipped with a minimum lubrication system and a fixed guard in front of the cutting area. equipment Compact, closed design with clear operation two pneumatic clamping cylinders Fixed protection from the cutting area Saw blade ø 300 mm Hodpeidqbbjfx Abtjnk Manual cutting feed Mist spray device for air-oil cooling workflow 1) Setting the cutting angle 2) Loading the material 3) Pneumatic clamping of the material 4) Press the start button to start the saw blade 5) the saw cut must be carried out manually with a hand lever 6) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, saw blade diameter: 520 mm, CNC-controlled double-head mitre circular saw with electronic saw head tilting Hedpfx Aboy Afvijtenk A high-performance circular saw designed for precise and efficient cutting of profiles made from aluminium, non-ferrous metals, and various plastics. The machine can be used for individual cuts—sawing the profile simultaneously with two saw heads—or in automatic mode, where the double-head saw operates as a single-head saw automation system. Electronic mitre adjustment of the saw heads. Mitre angles are infinitely programmable between 20° and 135°. Saw blade drive power: 2 x 2.2 kW Saw blade diameter: Ø 520 mm Maximum cut length with both saw heads operating simultaneously: 4,000 mm or 5,000 mm Maximum / minimum cut length in automatic mode: unlimited (the profile is pushed and pulled) Roller conveyor travel length: 2,300 mm Maximum space requirement: approx. 7.2/8.2 m (saw unit fully to the right) x 1.25 m x H 1.6 m Weight: approx. 1,500 kg / 1,700 kg - CNC control with a touchscreen and color graphics on a mobile operator’s panel - Import and export of CSV / LTE files (for loading cutting lists from external design software) - Graphical profile display Optionally equipped with a label printer.

Condition: ready for operation (used), Mep Cobra 350 Metal Circular Saw / Cold Saw Saw Blade Diameter: 350mm Max. Cutting Capacity: 180mm x 70mm Swiveling Head: 45° left and right Roller Conveyor Extraction Unit Minimum Quantity Lubrication Speeds: 1700/3400 rpm You are welcome to arrange an inspection. We are happy to organize affordable shipping for you! You will receive a proper invoice. Hnedpfoyx Az Isx Abtsk For international customers, a net invoice can be issued. The requirement is a valid VAT ID number. Subject to prior sale. Please visit our shop and check out our other offers. The mentioned company names and trademarks are the property of their respective owners and are used only for identification and description of the products. Technical data and errors in the article description may occur and are subject to change.

Condition: new, Circular saw blade diameter 300 mm Bore 40 mm thickness 3 mm Number of teeth 180 Pitch circle driver bore 63 mm diameter driving hole 11mm Hsdpfx Asmxi T Ajbtenk HSS unused ,from magazine liquidation bearing number 28418

Condition: new, Circular saw blade HSS diameter 225 mm Hnjdpsmxi T Uofx Abtek Number of teeth 180 pitch 4 mm width 2 mm Bore 32 mm (28419) unused, from magazine liquidation

Condition: used, Year of construction: 2009, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 128 mm, saw blade diameter: 400 mm, saw blade bore: 30 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 3,000 rpm, overall weight: 1,050 kg, sliding table length: 3,200 mm, The used Socomec panel saw Galax 320EL is a powerful panel saw. It impresses with its robust construction and versatile application capabilities for cutting solid wood and panel materials. Machine equipment Panel saw with sliding table Rip fence Hnjdpfeyyl Akjx Abtjk Crosscut fence with angle adjustment Scoring unit Sturdy cast iron table construction Extraction port Further technical data Speed: 3000/4000/5000 rpm

Condition: new, Year of construction: 2023, Capacity Ø 15 - 100 mm sawing motor 11 kW saw speed 30-130 U / min hydraulic motor 2,2 kW Saw Feeding Servo 1,5 KW Siemens Material Feeding Motor 1,5 KW Siemens saw-blade dia. Ø360 x T2.6 x 2.25 x 40 mm cutting range min. 3000 mm cutting range max. 7000 mm control Siemens hydraulic Rexroth Valve Hnodpfeyk Ihvsx Abtsk coolant Pulverisiertes Schneidöl required space 2900 x 7400 m weight of the machine ca. 4900 kg GERD WOLFF GLS-160 High-performance circular saw From 10 to 250 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3615 102 087, saw blade diameter: 350 mm, New Price Hnsdpfx Absvwm Ecotsk KASTO radial U10 good as new A lot of new saw blade, (see pictures)

Condition: used, Year of construction: 2003, saw blade diameter 510 mm cutting diameter 150 mm capacity 90 degrees: flat 450 x 150 mm capacity 90 degrees: square 150 mm turning speeds 29 / 58 m/min. total power requirement 4,2 kW Hedpfx Ajyrhursbtjnk weight 1,55 t range L-W-H 1,8 x 1,7 x 1,7 mm Long-cut cold circular saw, semi-automatic - with miter adjustment left 50°, right 60° - digital cutting angle display - hydraulically adjustable feed speed - hydraulic workpiece clamping - 4 spare saw blades

Condition: used, Year of construction: 2009, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling Hodpfsyrhu Sjx Abtenk • Cutting pressure regulator

Condition: excellent (used), Sawblade tiltable 45 ° Length of the rolling table 3.200 mm cutting width 1.250 mm Motor output 5,5 kW Saw blade diameter 350 mm Scoring unit 0,75 kW Altendorf type F45 Elmo sliding table saw for precise rip, cross and mitre cuts in solid wood, panel materials and coated materials. The machine enables precise and repeatable cuts thanks to the smooth-running sliding carriage, motorized adjustment (Elmo), scoring unit and stable cast construction. Ideal for joineries, furniture construction and interior fittings. Hnedpfx Ajyq Ab Dobtjk

Condition: used, Sawblade tiltable 45 ° Motor output 11 kW Hnedpfjypwaxsx Abtok Cutting height ca. 280 mm Saw blade diameter 780 mm Large mobile timber circular saw A.Reckers type ATS for various sawing tasks in workshops or on construction sites.

Condition: good (used), For sale is a used Holzprofi FPSF-2000 M combination circular saw and spindle moulder with a cutting width of 1000 mm. The machine is in good condition and has been serviced and inspected by our professional staff. (Fully operational) Technical specifications: - Circular saw tiltable 90-45° - Fixed spindle moulder - Sliding table 2500 mm - Cutting width 1000 mm - Outrigger table with crosscut fence - Short mitre fence - Spindle moulder fence 240 mm - 3 spindle speeds: 3000/5000/8000 rpm - Dual motors, each 4 HP The machine is located in A-8561 Söding and can be inspected during our business hours. Subject to prior sale! Hnedpfx Abeyx Ar Tetsk Related terms: saw, circular saw, spindle moulder, combined machine, combination machine, milling machine Reference: R-Y00P2

Condition: used, Year of construction: 1992, saw blade diameter 1250 mm cutting diameter 380 mm cutting range 480x320 mm motor speeds: 3000 U/min feed speeds 1000 mm/min main drive motor 112 kW cutting speed 10-265 m/min total power requirement 125 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Hjdpfjyqu Rdex Abtsnk We look forward to your visit. Your Markus Hirsch Team

Condition: new, functionality: fully functional, Year of construction: 2020, We are selling a new exhibition machine from the manufacturer Sahinler. Motorized circular shear with hydraulic clamping Technical data: - max. diameter: 1200 mm - smallest diameter: 220 mm - max. sheet thickness (ST 42): 3.5 mm - max. sheet thickness (Inox): 3.0 mm - Speed: 6.1 m/min - Motor power: 2.2 kW - Weight: 750 kg - Dimensions (LxWxH): 2000x600x1400 mm - Projection in the sheet metal holding stand: 750 mm - Projection in the shears: 250 mm Hnodpfx Ajva Acvobtjk - Knives made of special steel K 2379 - Hydraulic internal cutting system - motorized centering system - central lubrication

Year of construction: 2009, condition: used, Year : 2009 Type: Vibrating sieve Material : stainless steel Engine reference: Elettromeccanica Tarcisio Pugni PVF-F 200 Motor power: 1.1 kW / 1500 rpm Nominal sieve diameter: 900 mm Hnodpfx Abeykb U Nstsk Système de décolmatage : billes Machine dimensions: 110 x 130 x 120 cm Plan for replacement of the grid: this item may be subject to a separate quotation.  

Condition: used, functionality: fully functional, saw blade diameter: 400 mm, Brand: Kaltenbach Type: KKS 400M Max. saw blade diameter: Ø400 mm Hnodpfx Abov Eu Rpjtok Used Kaltenbach circular saw in working condition.

Condition: good (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 450 mm, total length: 1,300 mm, total width: 1,300 mm, total height: 1,500 mm, cutting range round steel at 90°: 100 mm, overall weight: 500 kg, length stop: 2,000 mm, power: 4 kW (5.44 HP), Circular saw for Aluminium, capacity Ø 3 - 100 mm, blade Ø 450 mm, mitre LH + RH 22° - 90° - 22°, motor 4 kw, speed 2800 rpm; options: vertikal clamping, air/oil mist lubrication, digitale mitre device, pression regulation device, rollers left side 3 meter with vertical rollers, measuring rollers right side brand AMAT 2 meter with back pulling device; dimension 130 x 130 x 150 cm, weight ca. 500 kgs Hnodpfxoyxfxie Abtjk

Condition: used, Year of construction: 2023, Used machine Year of manufacture 2023 Hnjdpew Nacvjfx Abtjk Technical data: Sliding table length 3200 mm Cut length sliding table 3200 mm Cutting height at 90° max. 155 mm at 46° max. 105 mm Cutting width at rip fence 1250 mm Length stop on cross slide extendable up to 3500 mm Saw blade diameter max. 450 mm Saw blade diameter (retractable under table) ø 400 mm Table size cast iron table top 1200 x 655 mm Table extension plus 750 x 655 mm Table widening 1430 x 940 mm Table height / working height +/- 20 mm 900 mm Motor power 5.5 kW / 7.5 HP Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Voltage 400 V / 50 Hz Space requirement 7000 x 3500 mm Weight approx. 1150 kg Options: Motor 7.5 kW Tele-Digit length stop With central digital wireless display 0.1 mm in the low-power system for both stop flaps up to 3000 mm instead of the standard length stop Double-sided miter stop DSG A For angle cuts 0° – 90° on the aluminum double sliding table, length and angle measurement adjustable via scale; for cross cutting up to 1375 mm with length compensation for preferred angles 5°, 10°, 15°, 22.5°, 30°, 45°, 60°, 67.5°, incl. splitter wood, wall holder and an additional factor scale for easy calculation of incorrect miters for different workpiece widths Swivel device for the cross slide Quick ergonomic pushing into the park position 2 clamping clamps for sliding table Current list price: 46254.- Availability: short-term Storage location: Flörsheim

Condition: used, Welding turntable – Welding positioner with enclosure Circular welding device Load capacity approx. 50 kg Chuck diameter 300 mm Chuck rotational speed 1.0–15 rpm Power supply 230 Volts, 50 Hz - Spiral scroll chuck with internally stepped jaws - Infinitely variable speed adjustment via potentiometer - Drive via geared motor, rotation direction left - Start via electrical switch - Welding current transmission via slip ring contact - Extraction connection Ø 160 mm - Internal lighting Door opening W x H 715 x 1060 mm Hnedsdzp U Ispfx Abtek Internal dimensions W x D x H 780 x 780 x 1100 mm Required space W x D x H 900 x 900 x 2300 mm Weight 190 kg

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Year of construction approx. 1980 Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Sawing range for 90° square 95 x 95 mm Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds Hedpfx Absquzd Rstenk - Infinitely variable mitre quick adjustment up to 45° - Material vice with quick-release eccentric lever - Coolant device with electric coolant pump - material stop 350 mm - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) Hnsdpjdzp T Defx Abtsk - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: used, NC Multi-Blade - Double-Blade Saw for Light Metal MIKSITZ Year of manufacture: 1991 Circular saw, aluminium circular saw, table circular saw, mitre saw Hnsdpfsdzp Snjx Abtok For cross-cutting and notching aluminium profiles Saw blade travel: 500 mm Max. cutting height: 100 mm Saw blade speed: approx. 5000 rpm Installed saw blade diameter: 300 mm Max. saw blade diameter: 400 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz Table size: 1100 x 1100 mm Table opening: 300 x 1100 mm Working height: approx. 1100 mm Tool holder: SK40 - Several saw blades can be mounted on a single work shaft with double-sided bearing - A long SK40 arbor serves as the work shaft - Belt drive between the drive motor and saw shaft - Table height adjustable via hand crank (to set cutting depth) - Fixtures and stops can be mounted on the table - Saw blade movement via ball screw spindle with servomotor - Single-axis NC control for the cutting movement, LENORD + BAUER type GEL 7541.0000 - Separate control cabinet Space requirement (L x W x H): 1800 x 1600 x 1700 mm Weight: approx. 1100 kg