Used Circular Saw Mill for sale (14,842)

Condition: excellent (used), Bargain in excellent condition: panel saw and spindle moulder with tooling Ljdpfsy Ni Ayjx Ahzorl

Condition: excellent (used), Panel Saw-Spindle Moulder KNAPP KFS Profi T -used- Sliding table saw with format sliding carriage, with outrigger table, tilt-adjustable circular saw, mitre and angle fence, tilt-adjustable spindle moulder, moulder spindle with reversible rotation (clockwise/counterclockwise), fine-adjustable moulder fence ----- Technical Data ----- Cutting length (sliding table): 2,000 mm Cutting height: 103 mm Cutting width: 700 mm Max. saw blade Ø: 315 mm Saw blade tilt range: 45° Spindle moulder diameter: 30 mm Spindle tilt range: 45° Spindle speeds: 2,850 / 4,000 / 7,800 rpm Saw extraction port: 120 + 40 mm Spindle extraction port: 120 mm Dimensions (LxWxH): 2,010 x 1,230 x 83 mm Weight: 590 kg Quality info: - All settings checked Lsdpfjyyzqdex Ahzerl - Adjusted according to manufacturer specifications - Complete basic inspection - Thorough basic cleaning - Electrical system checked - Immediately ready for operation

Condition: good (used), Year of construction: 1990, functionality: fully functional, Paoloni TT20-I Circular Saw Milling Machine S/N 00005/90 Year of construction 1990 Manufacturer Paoloni Macchine S.p.A. Italy Lodpfx Aetq Ivlohzorl Saw blade diameter max 350 mm Aluminum carriage with V-guide carriage length 2.100 mm rip fence 125mm Support table up to 340cm Saw blade tiltable 45 degrees scoring unit 125mm, 1 HP Cutting height max 110mm Motor 5.5 HP Speeds: 3000/4500 / 6000 Table milling machine Spindle diameter 30mm for tenon cutters Spindle stroke 180mm max table opening 340mm motor 5,5 HP 5 different speeds (adjustable with belt pulley) 2500-8500 RPM weight 1300 kg

Condition: used, Year of construction: 2008, KALTENBACH KKS 400 E HYDRAULIC METAL CIRCULAR SAW MAKE KALTENBACH, MADE IN GERMANY MODEL KKS 400 E YEAR 2008 SAW BLADE DIAMETER Up to 400.0 mm CUTTING CAPACITY AT 90 DEGREES ROUND: 130.0 mm SQUARE: 120.0 mm FLAT: 305.0 x 40.0 mm or 240.0 x 85.0 mm CUTTING CAPACITY AT 45 DEGREES ROUND: 130.0 mm FLAT: 245.0 x 30.0 mm or 180.0 x 70.0 mm MILTER ADJUSTABLE LEFT - RIGHT 0 – 90 DEGREES INFINITELY VARIABLE SAW BLADE FEED RATE 0 – 10 m/min SAW BLADE CUTTING SPEED 13 / 26 m/min Ljdsy D I Nnepfx Ahzorl SAW DRIVE 400 V / 1,7 / 2.6 kW HYDRAULIC DRIVE 400 V / 0.75 kW PLUS 2 SETS OF LOADING RACK

Condition: new, saw blade diameter 400 mm Number of revolutions 3000 r.p.m hole of sawblade 32 mm sawblade width 4 mm Control NC total power requirement 1,5-2 kW weight of the machine ca. 162 kg Lredpfx Aoy S Dwwohzjl required space 740 x 780 x 1350 mm The Gerd Wolff AC 400 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Standard Accessories -BLocation points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air pistol Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Cutting plane directly on the saw blade Large-sized saw unit made of cast iron, double-mounted on the cast iron table – guarantees stability, precision, smooth operation, and long service life; 6-year HOLZKRAFT warranty on wear of the swivel segments Precision-guided format sliding table made of aluminum, anodized as standard 10-year HOLZKRAFT warranty on wear of the sliding table guide rails Parallel fence as standard with round bar guide and fine adjustment Large work table made of milled cast iron Smooth operation and precise cuts Standard table extension and table lengthening enable easy work with larger workpieces Extendable aluminum telescope fence with angle adjustment and two professional folding fences Made in Italy Motor 4.0 kW - 400 V Ledewb Eh Njpfx Ahzorl Saw blade tilt 90 - 45° Format sliding table length 1600 mm Table length 1020 mm Table width 325 mm Cutting width with parallel fence 700 mm Max. cutting height 90° = 100 mm Max. cutting height 45° = 79 mm Saw blade diameter 315 mm Saw blade speed 315 mm Max. crosscut width to the left of the saw blade 1660 mm Scoring saw blade diameter 80 mm Scoring saw blade speed 7600 mm Weight: approx. 276 kg Note! The parallel fence and table extension on the right are not visible in the pictures. Availability: short-term Location: Flörsheim

Condition: excellent (used), AGT Combination table saw and miter saw - Cutting width: 380mm Lredpfxoy Tmgkj Ahzsl - Cutting height: 85/40mm - Weight: approx. 50kg - Tilting and swiveling

Condition: excellent (used), Year of construction: 2000, Sawblade tiltable +/- 45 ° Length of the rolling table 2800 mm cutting width 1440 mm Motor output 7,5 kW Cutting height 150 mm Lrjdpfx Ahsxcg Hgozel Saw blade diameter 450 mm weight of the machine ca. 1200 kg range L-W-H 3,2 x 3,4 x 1,7 mm

Condition: good (used), Year of construction: 1979, machine/vehicle number: 3297, functionality: fully functional, CIRCULAR SAWING MACHINE WITH MULTI-STAGE GEARBOX TYPE: 1631 Lredpfx Aey S Sxcohzjl MACHINE NO.: 3297 YEAR OF MANUFACTURE: 1979 Technical Data: Table size: 675 x 500 mm Minimum distance from saw mandrel to top edge of table: 60 mm Height adjustment: 50 mm Maximum saw blade diameter: 300 mm Minimum saw blade diameter: 160 mm Saw blade arbor holes: 32 mm and 40 mm Maximum table travel: 200 mm Maximum cutting height: 87 mm Maximum cutting width to the side of the saw blade: 300 mm Standard motor power: 1.5 hp Height from top edge to table: 885 mm Space requirement: 700 x 900 mm Weight: approx. 197 kg Condition: good, functional

Condition: used, Year of construction: 1996, workpiece length 55- 170 mm work piece width max. 28 mm workpiece height max. 27,5 mm milling motor 2 cut-off saw 1 Special machine APK automatic sawing and milling machine for cutting wooden blocks to length and then milling them. Special design for the production of cutlery tray inserts (see pictures) or similar workpieces. Work sequence: Lredpfxoy Ty Hqj Ahzol 1. feeding the material from the magazine 2. cutting (sawing) to the desired length 3. milling of the cut workpieces 4. ejection of the finished part.

Condition: used, Year of construction: 1998, saw blade diameter 450 mm cutting diameter 150 mm capacity 90 degrees: flat 330 x 40 mm capacity 45 degrees: round 140 mm Lredpsv Hth Aofx Ahzsl capacity 45 degrees: flat 250 x 40 mm cutting speed 10 - 70 m/min saw head feed 0 - 1000 mm/min sawing motor 1,7 / 2,6 kW weight of the machine ca. 1,1 t Accessories: used sawblade 450 mmø, material feeder M 45 NC für autom. run, ingoing roller track 7000 mm, outgoing roller track 4000 mm

Condition: used, Year of construction: 1991, saw blade diameter 400 mm cutting diameter 130 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 220 x 80 mm feed length 600 mm feed length: multiple 1800 mm cutting speed 10/13/15/20/26/30 m/min mitre joint cuts -/+ degrees 60 total power requirement 5,5 kW weight of the machine ca. 1,8 t dimensions of machine L x W x H 2,45 x 1,20 x 2,00 m - mitre cutting +/- 60 ° with DRO - Ljdpfev Hhrvox Ahzerl Accessories: new sawblade 400 mmø, coolant

Condition: used, Year of construction: 1983, saw blade diameter 400 mm cutting diameter 130 mm stroke 150 mm cutting range - square - 120 x 120 mm cutting range - flat - 300 x 40 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm capacity 45 degrees: flat 245 x 40 mm mitter cutting - all-position 90 ° cutting speed 13 / 25 m/min control minipos 807 Lrsdpfotqqrzjx Ahzol total power requirement 4,3 kW weight of the machine ca. 850 kg dimensions of machine L x W x H 1,20 x 1,20 x 1,82 m Accessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolant

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. Lodpfxoy Dtpmj Ahzjrl MG 3 Chip Extraction Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016.

Condition: like new (used), Year of construction: 2019, operating hours: 1,750 h, functionality: fully functional, MEP Tiger 372 CNC LR 4.0 automatic metal circular saw (2019) Manufacturer: Mep Model: Tiger 372 CNC LR 4.0 automatic metal circular saw Year of manufacture: 2019 Condition: used, very good, inspected and cleaned Operating hours: 1750h Cutting range ROUND 0° 120 mm Cutting range ROUND 45° left 115 mm Cutting range ROUND 60° left 115 mm Cutting range ROUND 45° right 115 mm Cutting range SQUARE 0° 110 mm Cutting range SQUARE 45° left 100 mm Cutting range SQUARE 60° left 90 mm Cutting range SQUARE 45° right 100 mm Cutting range FLAT 0° 180 x 100 mm Cutting range FLAT 45° left 120 x 100 mm Cutting range FLAT 60° left 90 x 90 mm Ledpfxsy S Ezwj Ahzorl Cutting range FLAT 45° right 120 x 100 mm Continuously variable speed 15 to 150 rpm Motor 5.5 kW Saw blade 370 x 32 mm Coolant system Length 2500 mm Width 1840 mm Height 1890 mm Weight 1060 kg Scope of delivery: – Documentation – 2 m feed roller conveyor – Machine lighting – Chip conveyor – Coolant system

Condition: like new (used), Year of construction: 2018, operating hours: 2,150 h, functionality: fully functional, MEP TIGER 372 CNC LR 4.0 metal circular saw + CB4001 magazine High-performance automatic CNC metal circular saw with microprocessor control for cuts from 45°right to 60°left. Manufacturer: MEP Type: TIGER 372 CNC LR 4.0 Year of manufacture: 2018 Condition: very good, little used Switch-on hours: 2128h Cutting time: 1738h Machine with microprocessor control and two CNC-controlled axes, which allow up to 300 cutting programs, each with its own number of pieces and length, with the same material or material on the CB4001 loading magazine. Cutting range ROUND 0° 120 mm Cutting range ROUND 45° left 115 mm Cutting range ROUND 60° left 115 mm Cutting range ROUND 45° right 115 mm Cutting range SQUARE 0° 110 mm Cutting range FOUR-EDGE 45° left 100 mm Cutting range FOUR-EDGE 60° left 90 mm Cutting area FOUR-SQUARE 45° right 100 mm Cutting area FLAT 0° 180 x 100 mm Cutting area FLAT 45° left 120 x 100 mm Cutting area FLAT 60° left 90 x 90 mm Cutting range FLAT 45° right 120 x 100 mm Infinitely variable speed 15 to 150 rpm Lrjdpfxjy S Ezqo Ahzel Motor 5.5 kW Saw blade 370 x 32 mm Coolant system Length 2500 mm width 1840 mm height 1890 mm Weight:1060 kg Scope of delivery: - Original documentation - 4x saw blades

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Behringer Eisele VMS 400 A metal circular saw for processing almost all steel qualities. Integrated coolant unit and micro-spraying system, selectable in the control system as required Hydraulic saw feed and quick clamping vice with clamping pressure reduction NC control with graphic display and keypad 3 selectable operating modes (manual mode, series and single cuts) Convenient stroke adjustment of the saw unit via clamping lever Can be combined with infeed and outfeed roller conveyors Manufacturer: Behringer Eisele Type: VMS 400 A metal circular saw Year: 2013 Condition: used, very good Flat 90 ° [mm] 200 x 120 Flat 45 ° [mm] 140 x 120 Flat 30 ° [mm] 100 x 100 Square 90 ° [mm] 120 Lrjdpfxoy S Eygs Ahzol Square 45 ° [mm] 120 Square 30 ° [mm] 100 Round 90 ° [mm] 140 Round 45 ° [mm] 140 Round 30 ° [mm] 110 Feed length 800 mm Drive power 2.0 / 2.6 kW Speeds 8 / 16 / 32 / 64 min-1 Saw blade diameter 400 mm Saw blade feed hydraulic Material feed ball screw Hydraulic clamping device Minimum quantity lubrication Chip clearing brush Length 3,100 mm Width 1,500 mm Height 2,000 mm Weight 1,350 kg Material support height 920 mm Scope of delivery: Documentation 4x saw blades 1x feed roller conveyor 2m

Condition: used, Year of construction: 2004, 1 piece oscillating saw, SCHEPPACH WS600WOX Blade diameter min. 550/max. 600mm, bore diameter 30mm Color: as shown in the pictures, consistent with the images and inspection Year of manufacture: 2004 Condition: used Ledpfey Tkfdjx Ahzjrl

Condition: used, Year of construction: 2007, 1 unit of MACO KS425A under-table circular saw with roller conveyor, length approx. 4m, self-dismantled Color: as shown in the pictures, according to the images and inspection Year of manufacture: 2007 Lsdpfxjy Tkbre Ahzerl Condition: used

Condition: used, Year of construction: 2002, Sawblade tiltable 46 ° Length of the rolling table ~ 3.200 mm Ljdsy Spv Eepfx Ahzorl cutting width ~ 1.100 mm Cutting height max. 170 mm Saw blade diameter max 500 mm Motor output 5,5 kW Scoring unit 0,75 kW Martin T 73 Classic sliding table saw for precise cutting of solid wood, panel materials and coated materials with swivel saw blade and scorer. The machine enables precise rip, cross and mitre cuts and is designed for daily use in professional woodworking. Includes a comprehensive range of saw blades.

Condition: used, cutting width 250 mm Lrsdpfsyr Slbjx Ahzel Table dimensions 500 x 650 mm Saw blade diameter max. ca. 300 mm Frommia KS 381 table saw for precise longitudinal and cross cuts in solid wood and wood-based materials. The robust construction, angle stop, and swivel table enable reliable work in crafts and workshops. Ideal for carpentry shops and general woodworking and furniture construction.

Condition: used, Sawblade tiltable 45 ° Motor output 11 kW Cutting height ca. 280 mm Saw blade diameter 780 mm Large mobile timber circular saw A.Reckers type ATS for various sawing tasks in workshops or on construction sites. Ljdpfx Aheypwaxszsrl

Condition: good (used), cutting width 300 mm Cutting height 85 mm Motor output 1,5 kW saw-blade dia. 300 mm connected load frequency 380 V Lodpfxeyiu Sfs Ahzsrl

Condition: excellent (used), length ca. 3.200 mm width ca. 1.400 mm height ca, 1.600 mm Motors 2 table - swivable Ja The stable Bäuerle KFL combined woodworking machine combines a sliding table saw, slot drilling machine, and table router with feed in one machine and comes with a wide range of accessories. Roller table: yes Ljdpfsxwbpfox Ahzorl

Condition: used, engine 3 KW cutting width tba mm roller table nein ja/nein Lrjdpjwzbcvofx Ahzol Three-function combined table saw, slot drilling, and milling machine Kirchner Leipzig. Without milling arbor.