Used Combination Machine for sale (66,770)

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Spindle taper BT30, Spindle Motor 3Hp, Prototrak TMX Control, 8 Station ATC, coolant, Low Volt light. Iiodpfxez St Hwj Am Doh

Condition: repair required (used), Year of construction: 2024, For sale is a used Hammer planer machine A3-31 with a planing/thicknessing width of 310 mm. The machine is in like-new condition and has been refurbished and inspected by our qualified personnel. (Fully functional) Iisdpfx Amjzuxwho Dsh Technical data: - Planing/thicknessing width 310 mm - Silent Power planing shaft - Planing table, dual folding - Planing fence, swiveling 90-45° - Thickness setting 4-225 mm - 4 HP (3 kW) motor, 400 volts - Machine no. 52.09.021.24 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planer, thicknesser, planing machine, surfacing, thicknessing Reference: R-AT18K

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC. Isdpfxez R Rbde Am Deih

Condition: good (used), Year of construction: 1999, For sale is a used Hammer C3-31 Trend 4-in-1 combination machine with a cutting length of 1250 mm. The machine has been inspected and refurbished by our service team. Technical data: - Cutting length 1250 mm - Cutting height 103 mm - 3 milling speeds - 3 system cutterhead shafts - Planing width 310 mm - Max. passage height 230 mm - 3 motors, each 3 kW / 4.1 hp - Year of manufacture 1999 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thicknesser, thicknessing machine, circular saw Iodpfjz Sthuex Am Djih Reference: R-J0001

Condition: excellent (used), Year of construction: 2023, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, Iisdpjz Srv Dofx Am Djh +/- 35mm Y axis, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: good (used), Year of construction: 1996, For sale is a used Felder BF6-41X 4-in-1 combination machine with a cutting length of 2800 mm. The machine has been inspected and refurbished by our service team. Iedoz Sylgepfx Am Dsih Technical specifications: - Cutting length 2800 mm - Cutting height 103 mm - Max. saw blade diameter 315 mm - 3 milling speeds - Planer width 410 mm - 4-knife cutterblock - 3 motors, each with 3 kW / 4.1 HP - Year of manufacture 1996 - Includes feeding device The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Combination machine, combined machine, planer, thicknesser, thicknessing machine, circular saw Reference: R-D0975

Condition: good (used), Year of construction: 1987, For sale is a used Felder BF5-41 4-in-1 combination machine with a cutting length of 1200 mm. The machine has been inspected and refurbished by our service team. Iodpfxjz Symkj Am Doih Technical data: - Cutting length 1200 mm - Cutting height 95 mm - Max. saw blade diameter 300 mm - 3 milling speeds - Planer width 410 mm - 4-knife cutterblock - 3 motors, each 3 kW / 4.1 hp - Year of manufacture 1987 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, multi-function machine, planer, thicknesser, circular saw Reference: R-E28JC

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Distance Between Centres:1750mm Control: Prototrak SLX Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs Isdpfxezrnkre Am Doih

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Iiodpfjxxb Rrex Am Deh Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Iodpfjx D Tbmsx Am Djih Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 1990, functionality: fully functional, planing width: 310 mm, cutting width at rip fence: 80 mm, Panel saw, milling machine, planer, mortising machine, combination woodworking machine, table saw, circular saw, joiner's saw, panel saw, table router, tilting spindle moulder Manufacturer: FELDER Model: BF6-31 Year of manufacture: 1990 Sliding carriage: 1.6 m Manual height adjustment for saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Support table Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the spindle Manual spindle tilt up to 45° to the rear Spindle diameter: 30 mm 3 speeds, adjustable by belt Spindle retractable below table and removable Motor power of milling unit: 3 kW Milling fence with fine adjustment Ijdsyzdnbopfx Am Doih Surface and thickness planer Planing width: 31 cm Maximum workpiece height: approx. 22 cm Central dust extraction hood for planing and thicknessing Tilting fence 2-knife Felder cutterblock system Motor power: 3 kW Mortiser Single-lever control Workpiece hold-down Chuck up to 16 mm

Condition: used, Year of construction: 2000, functionality: fully functional, cutting height (max.): 96 mm, saw blade diameter: 300 mm, planing width: 300 mm, input voltage: 400 V, power: 3 kW (4.08 HP), input frequency: 50 Hz, sliding table length: 2,250 mm, The used SAMCO CU 300K is a versatile combination woodworking machine designed for professional applications. It integrates multiple machining functions in a single unit and is ideal for workshops with limited space. Despite its year of manufacture, it offers robust construction and reliable performance for daily operations. Machine equipment Circular saw unit Surface planer Thickness planer Milling unit Further technical data Maximum thickness planing height: 230 mm Ijdpfsyyltiox Am Doih

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Format panel saw, milling machine, combination machine, table saw, circular saw, joiner’s circular saw, format saw, panel saw, table milling machine, tilting spindle milling machine FELDER Type: KF7 Year of manufacture: 1996 Format sliding table 300 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Parallel fence with fine adjustment up to approx. 125 cm Extension table with telescopic extension arm Isdpfx Amsz Eft Ie Deih Rip fence extendable up to approx. 320 cm, adjustable for miter cuts with degree scale system Parallelogram protective device with upper extraction hood Motor power saw motor 3 KW Tilting spindle milling machine Manual height adjustment of the tilting spindle Manual tilting of the milling spindle up to 45° backwards Milling spindle diameter 30 mm 3 speeds adjustable via belt Milling spindle can be lowered and removed under the table Motor power milling unit 3 KW Milling fence with fine adjustment Folding device for feed A prior inspection is highly recommended; simply leave your phone number in an email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options; please inquire. The offered item is offered with differential taxation. The stated selling price is the gross final price. An invoice with VAT breakdown will not be issued. You will receive an invoice in accordance with §25 UStG. Warranty basis: Due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: excellent (used), Year of construction: 2019, Combined jointer and thicknesser SCM minimax fs 41e Year of manufacture: 2019 Power of drive motor: 5 kW Ijdpfx Aezi Nhmom Doih Connection voltage: 400 V Mains frequency: 50 Hz Planer cutterhead type: TERSA – 4 cutterheads Speed: 5200 rpm Planing width, max.: 410 mm Feed rate: 6 / 12 m/min Dust extraction port: 2, diameter for thicknessing: 120 mm Jointer Infeed table, length: 1034 mm Chip removal, max.: 5 mm Dimensions and weights, length: approx. 2000 mm Width/depth: approx. 1110 mm Height: approx. 1115 mm Weight: approx. 430 kg TERSA cutterhead system enables particularly quiet operation. Helically toothed steel infeed roller for consistent and uniform material feed. Material feed with two speeds. Numerical display for thickness table height. The 2,000 mm long jointer tables facilitate easy jointing of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them resistant and permanently flat. Sturdy, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height. The high machine weight ensures the highest precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction.

Condition: like new (used), For sale is a used Hammer C3-31 combination machine with a cutting length of up to 865 mm. The machine was only used briefly for demonstration purposes in our workshop. Therefore, it can be described as being in new condition and comes with a full warranty. Technical specifications: - Jointer/planer width 310 mm - 3 cutterblocks (reversible cutter system) - Planing height 4-225 mm - Tilting circular saw 90-45° - Sliding table 1250 mm Iiodpfx Amezxdrlo Deh - Miter gauge - 3 motors, each with 4 hp The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thicknesser, circular saw Reference: R-D1618-37

Condition: used, Year of construction: 2021, machine/vehicle number: DW2110130101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 85 A, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 30 mm, number of axes: 4, number of slots in tool magazine: 10, total height: 2,400 mm, total length: 4,300 mm, total width: 2,250 mm, overall weight: 2,000 kg, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, We offer this used Apollo 4AX 2030 CNC Router, year of manufacture 2021. Manufacturer: Apollo Model: 4AX 2030 Year of manufacture: 2021 Iiodpjz Iz Imjfx Am Deh Condition: used Machine type: CNC Router If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2002, For sale is a used Holzprofi circular saw and milling machine with a cutting length of 2500 mm. The machine has been inspected and refurbished by our service team and is in good condition. Technical specifications: - Cutting length 2500 mm - Cutting width 1200 mm - Cutting height 90 mm - 3 milling speeds Iodpoz Apgiofx Am Deih - Height-adjustable + swiveling - Dust extraction port Ø 100/80 mm - 2 motors, each 4.4 kW / 6 HP - Year of manufacture 2002 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: circular saw, milling machine, combination machine Reference: R-J047R

Condition: good (used), Code: 0403 Brand: SICAR Model: BRAVA 350/3 - CE Standard 3-works combined machine (Surface planer /Thickness planer /Mortiser) for wood, joinery, furniture, joinery fittings, plastics and various – CE Standard Technical specifications: Working width 350 mm Work surface length 1600 mm Tilting of fenknives Knives dimensions 350 x 20 x 3 mm Thickness planer table dimensions 350 x 660 mm Iodszcfwxepfx Am Deih Max working height 220 mm Min working height 7 mm Feed speed 7 mt/min Router: Table dimensions 250 x 500 mm Longitudinal stroke 200 mm Transversal stroke 100 mm Vertical stroke 90 mm Chuck 16 mm Chuck rotation speed 5700 rpm Workpiece clamping presser Three-phase motor 2,2 Kw Overall dimensions mm 1700 x 950 x 1000 h Weight kg 340

Condition: used, Year of construction: 1997, operating hours: 500 h, functionality: fully functional, machine/vehicle number: Typ 250 R.B.S.EH, total width: 1,300 mm, total length: 3,200 mm, total height: 1,400 mm, trimming length: 2,960 mm, overall weight: 2,500 kg, table length: 25,002,920 mm, table width: 920 mm, table height: 900 mm, STEKO 250 master press, long belt grinder, veneer saw Iiodpfx Ajz Ecfhjm Dsh Cutting length 2970. Press 2500 x 1100, 920 for push-through operation Grinding table 2500 x 930 Includes existing grinding belts.

Condition: good (used), Code: 0486 Brand: SCM MINIMAX Model: CU 410 CLASSIC - CE Standard Universal professional high quality 6-works combined machine for joinery, production of furniture, custom furniture, panels, doors, window frames and various - CE Standard Technical data: Sturdy construction: the base consists of a single, fully welded steel monoblock Surface Planer: Max working width mm 410 Length of cast iron worktables mm 1800 Tiltable surface fence 90-45° Planer spindle rotation speed rpm 5200 Max removal at planer mm 4 Thickness planer: Thickness table size mm 605 x 410 Feed speed at thickness mt/min 7 Min/max working height on thicknesser mm 3/230 Circular saw: Squaring carriage length mm 2250 Squaring frame Blade inclination 90-45 degrees Max diameter of saw blade with installed scoring unit mm 315 Max saw blade projection mm 100 Scoring unit blade unit diameter mm 80 Cutting width at parallel fence mm 1050 Telescopic guide with 2 squaring stops Spindle moulder: Spindle diameter mm 30 Ijdpfx Amoz E Sgue Doih Max spindle length mm 100 Spindle rotation speed rpm 1400/3500/6000/8000 Max tool diameter mm 210 Mortiser: Cast iron mortiser with spindle diameter 16 mm Work surface dimensions 470 x 220 mm Workpiece clamping press N° 3 Three-phase motors Hp 5,5 Suction connections N° 3 ports diameter mm 120 Overall dimensions of assembled machine mm 2500 x 2800 x 1200 h Overall dimensions for transport mm 2500 x 1600 x 1200 h Weight kg 630

Condition: used, Year of construction: 1991, used Manufacturer: Casadei Type: FS 51 Year of manufacture: 1991 Iisdpjz Alb Aefx Am Djh Machine no.: H 5884 Motor: 4 kW Planing width: approx. 510 mm Planing height: approx. 230 mm Table length: approx. 2200 mm Surfacing tables: can be tilted – complete Table lips: slotted Table lips: low-noise Motorized automatic brake Number of knives: 4 Safety knife shaft Table guide rollers: 1 x Feed rate: 8 + 14 m/min Digital display for planing height Electric height adjustment Dust extraction connection: D 140 mm Space requirement: approx. 2200 mm x 1300 mm x 1000 mm Weight: approx. 900 kg Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee

Condition: excellent (used), Year of construction: 1999, operating hours: 650 h, functionality: fully functional, power: 4 kW (5.44 HP), Well-maintained, lightly used, powerful professional machine with 5 combined functions. Numerous accessories included. Isdjzn I Aaepfx Am Deih Features a circular saw and table router with sliding table, jointer and thickness planer, as well as a mortise drilling unit. 360 V The machine is available for sale immediately. It is located in a ground-level basement in 23858 Reinfeld. Transportation is the responsibility of the buyer.

Condition: good (used), Bernardo 320 multi-function machine: saw, planer, router – 5-in-1 Planer: width 32 cm, max height approx. 220 mm, 3 knives, 1 feed speed, Jointer: width 31 cm, table length approx. 140 cm, 3 knives, adjustable fence, Router: spindle diameter 30 mm, 2 speeds, 3500/7000 rpm, side carriage, adjustable fence, Saw: adjustable up-down and 0-45 degrees, side carriage, guide rail on the side carriage, Horizontal drilling machine: Table adjustable up-down, front-back, and left-right. The machine has 3 motors, each with 4 kW. Power supply: 380V. Used machine in good condition, ready for operation. Iedpfxsy Ti Tms Am Deih Robust multi-function machine. Weight: 760 kg.

Condition: ready for operation (used), functionality: fully functional, PANEL SAW Carriage length: 1600 mm Cutting height: 75 mm Scoring unit Tilting saw unit up to 45° Manual raising and lowering of the saw blade SPINDLE MOULDER Spindle diameter: 30 mm Isdpfxozz N Nno Am Dsih Spindle height: 90 mm Manual spindle raise and lower Speeds: 3500/6000/8000 rpm SURFACE & THICKNESS PLANER Working width: 300 mm Maximum thicknesser height: 200 mm 3-knife cutterhead Conventional knives HORIZONTAL DRILLING MACHINE 550 kg 220 V Year: 2016

Condition: excellent (used), Year of construction: 2019, For sale is a used Hammer B3Winner Comfort circular saw and router with a cutting length of 2000 mm. The machine is in very good condition and has been serviced and inspected by our specialist staff. (Fully functional) Technical specifications: - Circular saw and router tiltable 90-45° - Sliding table 2000 mm - Outrigger table with degree grid index - Miter stop 1300 mm - 4 routing speeds: 3000/6000/8000/10000 rpm - Cutting width 800 mm - 2 motors, each with 5.5 HP (4 kW) 400 volts Ijdpsv Sbpxefx Am Djih - Year of manufacture 2019 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: circular saw, milling machine, milling machine, combined machine, combination machine Reference: R-L0AHG