Used Circular for sale (1,530)

Condition: new, The 40 MP is a single-head saw with top-down cutting action, featuring a saw blade diameter of ø 400 mm. Comparable to Emmegi, Elumatec, Pressta-Eisele, Mecal, Fom, etc. Pgedperfapasfx Afhog The saw table can be manually adjusted to an angle of +/- 45°. The saw head can be manually tilted from 0° to 45° outwards. The 40MP single-head saw is equipped with horizontal clamping cylinders for secure profile clamping, minimal spray lubrication, and mechanical protection of the sawing area. Please also see our used stock machines from Emmegi, Elumatec, Pressta Eisele, etc.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 5 h, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,270 mm, cutting width at rip fence: 1,270 mm, cutting height (max.): 200 mm, saw blade diameter: 550 mm, height adjustment type: electric, overall weight: 1,000 kg, rotational speed (min.): 2,500 rpm, rotational speed (max.): 5,000 rpm, type of input current: three-phase, input voltage: 400 V, power: 9 kW (12.24 HP), Equipment: scorer, Robust steel and grey cast iron construction • Standard with three speeds • Equipped as standard with NC control and 7-inch LCD display for setting all machine axes • Saw unit with permanently precise dual pivot segment guide, 6-year Holzkraft warranty on wear of pivot segments • Electrical positioning of cutting height and saw blade tilting • Scoring saw unit with separate scoring motor • Powerful industrial motors • Smooth-running and precise sliding table made of anodised aluminium with proven, permanently smooth ball contact system on hardened rails, 10-year warranty on wear of guide tracks • Large support surfaces thanks to standard table extension and width extension • Grey cast iron saw table • Folding parallel fence with fine adjustment and round bar guide • Crosscut fence, extendable to 3200 mm, with two flip stops and eccentric clamp Pgsdpfx Afswz Nzyohsg • Particularly large outrigger with material roller, extendable to 2400 mm • Side-swivelling saw blade pendulum guard with integrated extraction port • Optionally available: mitre fences extendable up to 1500 mm for mounting directly on the sliding table • Numerous equipment options for individual customisation

Condition: new, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height (max.): 140 mm, saw blade diameter: 400 mm, rotational speed (min.): 3,500 rpm, rotational speed (max.): 4,500 rpm, type of input current: three-phase, input voltage: 400 V, pivoting range: 45 °, Equipment: motor brake, scorer, Heavy-duty sliding table saw with scoring unit and motorized sawblade adjustment Technical Description Motorized sawblade tilt and height adjustment with digital display Belt-driven main sawblade with speeds of 3500/4500 rpm Heavy-duty weight ensures vibration-free operation Large outrigger table with material roller Parallel stop with round bar guide and digital position display Extendable aluminum longitudinal stop with two folding stops 7.5 kW main motor mounted on a robust cast iron frame Four-bearing sliding table made of anodized aluminum with high torsional rigidity Standard table extension and table extension made of heavy-duty sheet metal Large pendulum guard can be easily raised using a gas spring Quick and convenient sawblade changes thanks to the Rapid clamping system Multiple locking mechanisms on the sliding table Dimensions and Weights Length approx. 3386 mm Width/Depth approx. 3600 mm Height approx. 1310 mm Weight approx. 850 kg Extraction connection Extraction nozzle diameter 120 mm Extraction nozzle diameter of saw blade guard 80 mm Electrical data Power consumption 7.5 kW Connection voltage 400 V Mains frequency 50 Hz Noise emission Sound pressure level 96.5 dB(A) Circular saw unit Cutting width with parallel stop 1300 mm Max. cutting width to the left of the saw blade 3200 mm Saw blade inclination 90 – 45 ° Max. cutting height 90° 140 mm Max. cutting height 45° 100 mm Saw blade diameter 400 mm Saw blade speed 3500/4500 rpm Sliding carriage and table Sliding carriage length 3200 mm Sliding carriage width 416 mm Sliding carriage height 890 mm Table length 1008 mm Table width 554 mm Table height 885 mm Scoring unit Scoring saw blade diameter min. 120 mm Scoring saw blade diameter max. 125 mm Scoring saw blade speed 8000 rpm Pgedpfx Afjwa I Upehjg #### For many years, we have maintained a partnership-based sales concept with specialist dealers, which is why orders are processed through a recommended partner coordinated with you.#####

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 17456, cutting length (max.): 3,200 mm, cutting width (max.): 1,270 mm, cutting height (max.): 200 mm, saw blade diameter: 550 mm, overall weight: 1,000 kg, pivoting range: 45 °, power: 7 kW (9.52 HP), Equipment: motor brake, scorer, New machine built in 2021, serial number: Stable steel and gray cast iron construction With three speeds as standard With NC control with 7 inch LC display as standard for adjusting all axes of the machine Saw unit with permanently precise double swivel segment guide, 6-year Holzkraft guarantee on wear of the swivel segments Positioning of the cutting height and the saw blade swivel electrically Scoring unit with separate scoring motor Powerful industrial motors Smooth and precise format sliding carriage made of anodized aluminum with proven and permanently smooth ball contact system on hardened, 10-year guarantee on wear of the guideways Pgodovxvbpspfx Afhog Large support surfaces thanks to standard table extension and widening Gray cast iron saw table Fold-down parallel stop with fine adjustment and round bar guide Crosscut stop, extendable up to 3200 mm, with two folding stops and eccentric clamp Particularly large boom with material roll, extendable up to 2400 mm Saw blade pendulum guard that can be swung away to the side with integrated suction nozzle Optionally available: mitre stops that extend up to 1500 mm for attachment directly to the sliding carriage Numerous equipment options for individual adaptation

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height (max.): 115 mm, saw blade diameter: 350 mm, height adjustment type: mechanical, rotational speed (min.): 3,500 rpm, rotational speed (max.): 4,500 rpm, type of input current: three-phase, input voltage: 400 V, pivoting range: 45 °, power: 4.7 kW (6.39 HP), Equipment: scorer, With a pivoting 350 mm saw blade and scoring device. Psdpfewa Andjx Afhjgg With manual height and angle adjustment and a digital display on the parallel stop. 115 mm cutting height. Sample machine built in 2022.

Condition: new, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height (max.): 115 mm, saw blade diameter: 350 mm, height adjustment type: mechanical, rotational speed (min.): 4,500 rpm, rotational speed (max.): 4,500 rpm, power: 4.5 kW (6.12 HP), sliding table length: 3,200 mm, Equipment: motor brake, scorer, Sawblade tilt and height adjustment are manual. Heavy weight ensures vibration-free operation. Large outrigger table with material roller. Parallel stop with round bar guide. Extendable aluminum longitudinal stop with two folding stops. 7.5 kW main motor mounted on a robust cast iron frame. Four-bearing sliding table made of anodized aluminum with high torsional rigidity. Standard table extension and table extension made of heavy-duty sheet metal. Large pendulum guard can be easily raised using a gas spring. Quick and convenient sawblade changes thanks to the Rapid clamping system. Multiple locking mechanisms on the sliding table. Length approx. 3386 mm Width/Depth approx. 3600 mm Height approx. 1310 mm Weight approx. 800 kg Extraction connection. Extraction nozzle diameter: 120 mm Pgodpfx Aswa I Ezjfhog Extraction nozzle diameter of sawblade guard: 80 mm Electrical data. Power consumption: 4.5 kW Connection voltage 400 V Mains frequency 50 Hz Noise emission Sound pressure level 96.5 dB(A) Circular saw unit Cutting width with parallel stop 1300 mm Max. cutting width to the left of the sawblade 3200 mm Sawblade inclination 90 – 45° Max. cutting height 90° 115 mm Max. cutting height 45° 80 mm Sawblade diameter 350 mm Sawblade speed 4500 rpm Sliding carriage and table Sliding carriage length 3200 mm Sliding carriage width 416 mm Sliding carriage height 890 mm Table length 1008 mm Table width 554 mm Table height 885 mm Scoring unit Scoring sawblade diameter min. 120 mm Scoring sawblade diameter max. 125 mm Scoring sawblade speed 8000 rpm #### For many years, we have maintained a partnership-based sales concept with specialist dealers, which is why orders are processed through a recommended partner agreed upon with you.#####

Condition: good (used), Year of construction: 1998, Semi-automatic circular sawing machine Make KASTO Type:V350 U Year 1998 with mitre cut, roller conveyor and stop Saw blade dm.350mm Pgjdpfxjfym Ewo Afhog Pneumatic vice and saw feed Stepless. Machine little used in good condition.

Year of construction: 1980, condition: used, Circular saw with miter cut Make KALTENBACH Type:KKS 400 M Year.ca.1980 Hydr.feed infinitely variable. Saw blade: 400mm Psdpfx Ajixumvefhjgg

Condition: excellent (used), Year of construction: 2002, ALU-profile mitre saw Fabr.Dry Tech Podpfx Aotwn E Uefhsgg Type:355 MLS Year 2002. Saw blade dm.355 mm Cutting range round max.120 mm Square max 120 mm X 120 mm

Condition: excellent (used), Year of construction: 2002, operating hours: 1,870 h, Tilting panel saw T 73 by Martin, equipped with 3-axis scorer and 3m sliding table Sliding table length: 3000 mm Saw blade tilting range: 0 to 46 degrees Speeds: 2800, 4000, and 5500 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Saw blade diameter up to 500 mm Maximum cutting height: 170 mm Cutting width up to 1100 mm, adjustable from the front via handwheel and manually movable Tilting angle and height electrically adjustable Crosscut fence with 2-point stop up to approx. 3350 mm Parallelogram cross table with digital angle display and roller Folding rip fence Extraction ports: 120 + 100 mm Sliding table can be locked in any position Handle Edging shoe 1 set of plastic saw blades with matching 3-axis scorer, freshly sharpened 3 riving knives 3-axis scorer unit, fully electrically adjustable while the machine is running 2 blade guards Miter fence for acute angles Tool compartment Emergency stop switch Operating manual CE marking The machine shows minor signs of use on the anodized sliding table. Small cuts on the sliding table have been repaired. Original paintwork, only touched up in a few places. Excellent condition as seen in the original photos. Dimensions approx. 3300 x 3750 x 1600 mm (LxWxH). Weight approx. 1950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller." Pgodpsxtvcxsfx Afheg

Condition: used, Year of construction: 2019, functionality: unexamined, Auction: Plant closure Roschmann, Gersthofen (Augsburg) Pgsdox N Nigspfx Afhjg Bid now – Sale to the highest bidder. Lot 2910010: Lot consisting of 1 used single mitre saw with conveyor belt in good condition. Shows minor signs of use and is suitable for precision cutting operations with pneumatic clamping and automatic feed assistance. Mitre saw: Elumatec TS161/21, year of manufacture 2019. Motor power: 1100 W, 4100 rpm. Feed system: Ruchser RU-LAP3 conveyor unit, 1.5 kW, 50 kg/m load capacity. Electrification: 400 V (saw), 230 V (RU), 50/60 Hz, 3.0 A + 4.5 A. Pneumatics: 7 bar air pressure, pneumatic clamping. Accessories: Integrated control panel, conveyor frame, length stop.

Condition: like new (used), Year of construction: 2023, For sale is a demonstration unit Hammer K3 Winner Comfort panel saw with a cutting length of 2000 mm. The machine is in mint condition. Technical data: - Sliding table: 2000 mm - Outrigger table: 1100 mm - Mitre fence: 1300 mm - Angle indexer Podpfx Asvxrurjfhegg - Saw blade tiltable 90-45° - Max. cutting height: 104 mm with blade diameter 315 mm - Cutting width: 800 mm - 5.5 HP (4 kW) motor, 400 Volt - Year of manufacture: 2023 The panel saw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, Hammer, panel saw, sliding table saw Reference: R-A0117

Condition: used, Year of construction: 1995, saw blade diameter 450 mm cutting diameter 130 mm cutting width 240 mm Cutting height 130 mm speed for saw blade 15 / 35 U/min Pgjdpsx I Sfuefx Afhsg weight of the machine ca. 0,85 kg dimensions of the machine ca. 1,2 x 1,2 x 1,85 m Cold circular saw with - Mitering device 45°/60° - Coolant system - 2 saw blades

Condition: used, Kölle Formatic Panel Saw - Year of manufacture: 1997 - 5.5 kW motor - 400 Volt - Weight: 1050 kg - Overhead control panel - 4 speeds - Electric lifting, lowering & tilting - Digital display for fence - Cutting width 1 m right of the blade - Brake motor Podpex Ha Rvofx Afhegg - 2800 mm - Cutting height 145 mm without scorer

Condition: excellent (used), Year of construction: 2010, Sliding table length: 3700 mm Cutting width at rip fence: 850 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: manual Saw blade diameter: 400 mm Speeds: 4000 / 4800 / 6000 rpm Motor power: 7.5 kW, 400 V, 50 Hz Extraction connections: 80 and 120 mm INCLUDED: Laser cutting line indicator MITREX double mitre fence Machine dimensions approx. L x W x H = 3850 x 1650 x 1850 mm Weight approx. 1200 kg Note on used machines: • Errors in technical details and prior sale reserved. • Prices listed are ex-works prices – loading free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no claim to warranty. Buyers are welcome to inspect the machines at our site. Pedexzfqbspfx Afhegg • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Condition: excellent (used), Saw blade Ø: 370 mm Cutting capacity at 90° round: 120 mm Pgedpfxsx Ek A Ts Afheg square: 100 mm rectangular: 180 x 100 mm at 45° round: 120 mm square: 100 mm at 60° round: 110 mm square: 90 mm 2 saw blade speeds: 15/70 rpm Drive motor: 400 V, 1.8/2.2 kW Required space: 1000 x 1000 x 1800 mm Weight: 390 kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, Length of sliding table: 3,000 mm Cutting width at rip fence: 1,000 mm Cutting height with blade diameter 450 mm: 75 - 150 mm Cutting height with blade diameter 350 mm: max. 100 mm (each at 90-degree blade position) Double carriage on steel round guides, no Pertinax Reinforced main saw motor: 7.5 kW Maximum saw blade diameter: 450 mm Height adjustment of the saw unit via dimension input on the control panel Motorized tilt adjustment of the saw unit via dimension input on the control panel Supplied with newly installed 350 mm saw blade 2-axis scoring saw unit, can be set in the control system to desired height and alignment relative to the main saw blade Scoring unit automatically lowers below table level when not in use Adjustment of the scorer can be done while the machine is running Podpox Dax Ejfx Afhjgg RAPIDO scoring saw blade – simplifies scoring width adjustment, set up in max. 3 minutes Adjustment range: 2.8 – 3.8 mm Additional accessories: - Mitre fence extendable to 3,200 mm, with 2 foldable stops - LASER cutting line indicator, e.g. for trimming cuts on solid wood planks

Year of construction: 2018, operating hours: 1,720 h, condition: good (used), fuel type: gasoline, Ferris IS 2100Z Zero-Turn Ride-On Mower / Park Mower / Rotary Mower 130CM 2018 Petrol Ongoing stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. has a variable inventory of machines, trucks, trailers and attachments. All our deliveries are at trade prices in AS-IS condition without warranties. (see our general terms and conditions) For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance as we are not constantly present. Pjdpfx Asx Hirisfhogg Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 1997, Semi automatic Aluminium circular saw, blade Ø 350 mm, capacity Ø ca. 125 mm, motor 3,7 / 4,5 kw 2-speed 1420/2880 rpm, vertical clamp, stops 30°, 45°, 60° 90° double side, blade; dimension 100x115x155 cm, weight ca. 600 kgs Pgjdpfx Ajtqfvyofhjg

Condition: good (used), Year of construction: 1987, functionality: fully functional, saw blade diameter: 375 mm, cutting range round steel at 90°: 135 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 680 kg, Semi automatic circular saw, blade Ø 375 mm, capacity Ø ca. 135 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, hydraulic vertical clamp, 1 horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device, measuring device 2 meters; dimension 85x110x180 cm, weight ca. 680 kgs Pgodpsx Dl Dmsfx Afheg

Condition: good (used), Year of construction: 1991, functionality: fully functional, saw blade diameter: 400 mm, cutting range round steel at 90°: 145 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 700 kg, Semi automatic circular saw, blade Ø 400 mm new, capacity Ø ca. 145 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, vertical clamp, horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device; dimension 85x110x180 cm, weight ca. 700 kgs Pjdpfxjwp Ipxj Afhjgg

Condition: excellent (used), Year of construction: 1977, Panel saw Scoring unit Year of manufacture: 1977 1250 mm to the right of the blade Pedpjwc Svpefx Afhogg 2800 mm cutting length 5.5 kW Dimensions approx. 2800 x 1200 x 950 mm Weight approx. 900 kg Not tiltable

Condition: good (used), Year of construction: 1991, cutting width (max.): 1,050 mm, cutting height (max.): 135 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, overall weight: 930 kg, power: 5.5 kW (7.48 HP), Equipment: scorer, MAKA SC 3200 Sizing saw with scoring unit Manufacturer MAKA/Griggio Technical data: Pedep H Tgbepfx Afhjgg Trimming carriage 3200mm cutting length 3300mm Cutting width right from saw blade 1050mm saw blade max. 400mm cutting height 135mm Saw blade can be tilted 0-45°. cutting height at 45° = 90mm (400'er saw blade) motor 5,5 KW/400 Volt 3 speeds 3/4/6000 rpm motor scorer 0,75KW Scorer Ø 125mm suction connection 120mm wide and narrow protection hood dimensions 3250x3100x830mm Weight 922 KG

Condition: new, Circular saw blade diameter 300 mm Bore 40 mm thickness 3 mm Number of teeth 180 Pitch circle driver bore 63 mm diameter driving hole 11mm HSS Pgjdpfx Aomxi T Ajfhjg unused ,from magazine liquidation bearing number 28418

Condition: new, Circular saw blade Pjdpfx Aemxi T Ujfhsgg HSS diameter 225 mm Number of teeth 180 pitch 4 mm width 2 mm Bore 32 mm (28419) unused, from magazine liquidation