Used Circulation Thermostat for sale (1,221)

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: TET702P3-20 - 2200368826, cooling capacity: 136 kW (184.91 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,131 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 23.1 m³/h, pump pressure: 3.19 bar, total width: 1,250 mm, total length: 3,535 mm, total height: 2,151 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process Chiller / Air-cooled Chiller Unit Type: TAEevo Tech 702 P3-20 Manufacturer: MTA S.p.A. The TAEevo Tech 702 P3-20 is a compact air-cooled water chiller designed for outdoor installation (operating range: -20°C to +46°C). Includes crankcase heater, phase monitoring, electronic expansion valves, 678-litre buffer tank, integrated P3 circulation pump, and winter control down to -20°C. Cooling capacity: 136 kW Chilled water temperature (outlet/inlet, °C): 7 / 12 Flow rate (m³/h): 23.1 Available pump head (bar): 3.19 Ambient temperature (°C): 32 Refrigerant: R410A Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power input (kW): 70.48 Pedpfew H N Hmox Ah Aegu Max. current (A): 119.28 Starting current circuit (A): 235.01 Protection class: IP54 Dimensions: Length (mm): 3535, Width (mm): 1250, Height (mm): 2151 Weight (kg): 2131 Connection: Rp 3" Serial No.: 2200368826 Year of manufacture: 2021 Condition: Cosmetic 2, Technically OK (used) Price: on request in Euro (plus VAT, ex works Nettetal) – 3 months warranty Please note: Due to previous use, used machines may have cosmetic imperfections. (Technical changes and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2014, Power Unit 300 P - Right-hand version - Compact design - High suction performance - Integrated pre-separator - BG-certified - Expandable control system - 100% air recirculation - Universally applicable - Optimal filter cleaning (also during operation) Technical data: - Inlet nozzle: 300 mm Pgsdpfexrpk Tox Ah Aou - Rated motor power: 7.5 kW / 3 Ph - Voltage: 400 V / 50 Hz - Max. air flow: 6,000 m³/h - Nominal air flow*: 5,089 m³/h - Negative pressure: 2,280 Pa - Filter area: 30 m² - Chip collection volume: 3 x 250 L - Dimensions (L / W / H) in mm: 2,963 x 994 x 2,346 - Weight: 880 kg Slide valve control + automatic start 1 pc Machine detection for up to 8 processing machines via current transformer coils or volt-free contacts and automatic slide valve control for up to 8 electro-pneumatic or -motorized shut-off slide valves at 24 V; external terminal box for independent wall mounting. Silencer for Power Unit 300 P 1 pc Location: Supplier

Condition: used, This listing is for the LEEC C330 Classic Incubator The unit is in full working condition and is ready for immediate use Key Specifications Chamber Capacity: 330 litres External Dimensions: 1417 mm (H) × 684 mm (W) × 620 mm (D) Internal Dimensions: 1200 mm (H) × 550 mm (W) × 500 mm (D) Temperature Range: Ambient +5°C to +60°C Podsxhf Umspfx Ah Ajgu Temperature Control Accuracy: Typically ±0.1°C at 37°C Temperature Variation: Typically better than ±0.2°C at 37°C Temperature Recovery Time: Approximately 4 minutes Power Rating: 440 watts (maximum) Weight: 107 kg Shelves Included: 6 Construction: Fully sealed chamber with polished stainless steel and rounded corners for easy cleaning Air Circulation: Fan-assisted for even temperature distribution Safety Features: Over and under temperature alarms, independent overheat safety cut-out, and password-protected settings Controller: Digital microprocessor with Fuzzy Logic and Auto-Tune features Notable Features Energy Efficiency: Low wattage heating elements combined with high-performance thermal insulation ensure excellent temperature stability while minimizing energy consumption. User-Friendly Interface: The digital controller displays both target and actual temperatures in real-time on a two-color display, making it simple to monitor and adjust settings. Enhanced Safety: Programmable alarm thresholds and an independent safety cut-out provide added protection against over-temperature conditions. Maintenance-Friendly Design: The sealed chamber with rounded corners facilitates easy cleaning, and the rear access port allows for safe insertion of temperature monitoring probes.

Condition: used, Year of construction: 2010, Overview  This rotary cold-glue labelling machine was manufactured in 2010 by the Spanish company Auxiemba. The model BASIC 600-10-CF-I-DR is designed for applying paper or polypropylene labels onto cylindrical glass bottles using cold-glue technology. It is equipped with formats for 330 ml, 500 ml, and 750 ml bottles, making it suitable for wineries, breweries, and beverage producers. The machine is being sold due to the closure of a production line and is available in very good working condition. Technical data  Capacity: up to 10,000 bottles/hour Bottle formats: 330 ml, 500 ml, 750 ml Bottle height range: 50–360 mm Bottle diameter range: 40–160 mm Label length range: 30–140 mm Rotation direction: Clockwise Number of bottle plates: 10 Number of labelling stations: 1 Air consumption: 125 L/min Power consumption: 17.3 kVA, 400 V Working height: 1,100 ± 50 mm Construction: Stainless steel frame, enclosed safety housing Control system: Micro PLC with touch-screen for speed, production, and fault management Key features: Cold-glue labelling head with oil-bath lubricated mechanisms Central carousel with centering bases for precise bottle positioning Pneumatic heated pump for adhesive circulation and return system Automatic bottle synchronization with infeed screw to prevent breakages Micrometric glue adjustment to reduce film thickness and ensure clean labelling Bottle retainers for smooth handling and reduced congestion Gear-driven transmission with clutch and emergency stop system Compact, fully enclosed design for hygiene and safety   Psdpfjxl Di Djx Ah Ajgu

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: iHCY020 PT1+FSH - 2200391515, type of input current: three-phase, cooling capacity: 5.46 kW (7.42 HP), overall weight: 150 kg, input voltage: 400 V, volume flow: 0.971 m³/h, warranty duration: 12 months, type of cooling: water, input frequency: 50 Hz, heating capacity: 6.43 kW (8.74 HP), temperature: 7 °C, total height: 1,330 mm, input current: 12 A, total length: 1,420 mm, total width: 550 mm, ambient temperature (min.): -15 °C, ambient temperature (max.): 46 °C, Inverter Heat Pump / Air-Cooled Chiller, reversible, Type: iHCY 020 PT1+FSH Manufacturer: MTA S.p.A. The HCYGNUS TECH Inverter iHCY 020 PT1+FSH units are compact, reversible heat pumps (heating/cooling) designed for outdoor installation, suitable for ambient air intake temperatures down to -15 / -10°C. Includes crankcase heater, buffer tank, integrated P1 circulation pump, electric frost protection heater (for evaporator, storage tank, and pump), and inverter scroll compressors. Heating capacity: 6.43 kW Heating water outlet/inlet temperature: 45 / 40°C Flow rate: 1.13 m³/h Available pump pressure: 0.84 bar Ambient temperature: +7°C Cooling capacity: 5.46 kW Chilled water outlet/inlet temperature: 7 / 12°C Flow rate: 0.971 m³/h Available pump pressure: 0.893 bar Ambient temperature: 32°C Refrigerant: R 410A Electrical specifications: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Pgodewzx Amopfx Ah Asu Max. power consumption: 3.06 kW Max. current: 11.43 A Starting current per circuit: 0 A Protection rating: IPX4 Dimensions: Length: 1420 mm, Width: 550 mm, Height: 1330 mm Weight: 150 kg Connection: R 1" Serial no.: 2200391515 Year of manufacture: 2022 Condition: Excellent visual appearance, technically OK (warehouse machine, unused) Price: On request in euros (plus VAT, ex works Nettetal) – 12 months warranty (Subject to technical modifications and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, This listing is for the Memmert IPP260eco Peltier-Cooled Incubator The unit is in full working condition and is ready for immediate use Memmert IPP260ecoplus Laboratory and Industrial Peltier Cooled Incubator 256l The Memmert IPP260eco is a professional-grade, Peltier‑cooled forced‑circulation incubator designed for laboratory use across microbiology, food, cosmetics, pharmaceutical testing, and more. Core Features & Capabilities Temperature Control Range: Provides accurate, stable temperature regulation from 0 °C to +70 °C, with fine control and minimal fluctuation. Ideal for sensitive assays requiring tight temperature tolerances. Eco-Friendly Peltier Technology: Solid-state Peltier cooling/heating eliminates the need for refrigerants or compressors—making it quiet, low-vibration, energy-efficient, and low-maintenance. Precise Temperature Uniformity: Powerful internal fan with forced air circulation ensures even temperature distribution throughout the 256-liter chamber. Precision rated at ±0.1 °C. Touchscreen Control Interface: Equipped with an intuitive coluor touchscreen (TwinDISPLAY) offering full digital control over temperature, timing, programs, and alarms. Users can create multi-step programs, view logs, and operate in multiple languages. Delivered With Two Shelves: The unit comes standard with 2 grid-style stainless steel shelves (adjustable), supporting even airflow and stable sample placement. The chamber can support up to 9 shelves total (max load 200 kg). Reliability & Safety ControlCOCKPIT (TwinDISPLAY): Touchscreen display for easy control and monitoring Timer programmable up to 99 days SetpointWAIT function (holds program steps until desired temperature is reached) Safety Features: Electronic and mechanical temperature monitoring Automatic self-diagnostics and alarm systems AutoSAFETY feature that monitors and limits max temperature to prevent overheating Specifications at a Glance Feature Specification Internal Volume 256 litres Temp. Range 0 °C to +70 °C Uniformity ±0.1 °C Internal Dimensions (W×H×D) 640 × 800 × 500 mm External Dimensions (W×H×D) 824 × 1183 × 655 mm Shelves Included 2 grid-style shelves (expandable to 9 total) Interior Material Stainless steel Doors Inner glass door + insulated steel outer door Connectivity USB, Ethernet, AtmoCONTROL software compatible Power Supply 115 V or 230 V (approx. 600 W) Precision & Control: Ideal for critical applications that require stable temperatures. Energy Efficiency: Peltier technology offers sustainability and low operational costs. User-Friendly Interface: Touchscreen control makes programming and monitoring simple. Robust Construction: High-grade materials ensure hygiene, corrosion resistance, and durability. Pgedpfx Ahoxhf Dbs Aou

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: iHCY051PT!+FSH - 2200382283, type of input current: three-phase, cooling capacity: 13.1 kW (17.81 HP), overall weight: 166 kg, input voltage: 400 V, volume flow: 2.22 m³/h, warranty duration: 12 months, type of cooling: water, input frequency: 50 Hz, heating capacity: 14.6 kW (19.85 HP), total height: 1,330 mm, total length: 1,420 mm, total width: 550 mm, ambient temperature (min.): -15 °C, ambient temperature (max.): 46 °C, pump pressure: 0.652 bar, Inverter heat pumps / air-cooled reversible chiller, Type: Cycnus iHCY 051 PT1+FSH MTA S.p.A. HCYGNUS TECH Inverter iHCY 051 PT1+FSH are compact reversible heat pumps (heating / cooling) that are suitable for outdoor installation down to -15 / -10°C intake temperature. Including crankcase heating, buffer tank, built-in P1 circulation pump, electric anti-freeze heating (evaporator, storage tank and pump) and inverter scroll compressors Heating output kW 14.6 Heating water temp. outlet / inlet: 45 / 40°C Volume flow m³/h 2.55 Available pump pressure bar: 0.652 Ambient temperature °C +7 Podpfovt Ucbox Ah Asgu Cooling output kW 13.1 Cold water temp. Outlet/inlet: 7 / 12°C Volume flow m³/h 2.22 Available pump pressure bar: 0.771 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 7.3 Max. current (A) 22 Starting current circuit (A) 0 Protection class: IPX4 Dimensions: Length mm 1420, width mm 550, height mm 1330 Weight kg 166 Connection R 1" Serial no.: 2200382283 Year of manufacture 2022, Condition: Optically 1, Technically OK (stock device, as good as new) Price: on request in euros (plus VAT from Nettetal) – 3 months warranty Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, This listing is for the Smeg GW1160S Lab Glassware Washer The unit is in full working condition and is ready for immediate use Key Features & Capabilities Thermal Disinfection: Heats up to 95 °C to deliver bactericidal cleaning for lab-grade glassware Programmable Control: Microprocessor-based electronic control with 9 preset programs and ability to store 6 custom cycles RS232 Connectivity: Integrates with external printers or PCs for traceability and logging Thermodynamic Drying: Equipped with active thermodynamic drying and a steam condenser (Ecoslim) featuring cold-water injection Construction & Design Internal Chamber: Made from AISI 316L stainless steel; robust, chemical-resistant, and easy to sanitize Exterior Finish: Panels constructed from AISI 304 stainless steel for durability and easy cleaning . Dual Wash Levels: Two independent rack levels on telescopic guides to accommodate varied glassware sizes Water & Chemical Handling Water Softener Built‑In: Includes a salt-sensing, auto-regenerating softener to prevent scale and enhance cleaning Dual Water Inlets: Compatible with both cold and demineralized water sources Detergent & Neutraliser Pumps: Comes standard with peristaltic pumps for alkaline powder detergent and acidic neutraliser; can optionally add more pumps Safety & Compliance Electronic Door Lock: Ensures the door remains securely locked during high-temp cycles Safety Thermostats & Alarms: Features multiple thermostats, interlocks, plus acoustic and visual alarms . Pgedpfx Aoxhf Aqjh Aou Dimensions & Power External Footprint: Approximately 600 × 600 × 850 mm, suitable for standard 60 cm bench space Chamber Size: Internal dimensions ~ 525 × 490 × 570 mm (depth varies slightly by source) Power Supply: Standard: 3-phase 400 V, 50 Hz, max 7 kW .

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2200369334, cooling capacity: 178 kW (242.01 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,907 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, volume flow: 30.4 m³/h, pump pressure: 3.16 bar, total width: 1,250 mm, total length: 4,660 mm, total height: 2,150 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process air cooler/ chiller/ chiller, air cooled, Type: TAEevo Tech 902 P3-20 MTA S.p.A. TAEevo Tech 902 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Including crankcase heater, phase monitoring, buffer tank 950 ltr. and built-in P3 circulating pump. Cold water outlet temperatures are adjustable from -10°C to +30°C. Cooling capacity kW 178 Cold water temp. outlet/inlet (°C): 7 / 12 Volume flow (m³/h) 30,4 Available pump pressure (bar) 3,16 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. Power consumption (kW) 90 Max. Current (A) 160 Starting current circuit (A) 365 Protection class: IP54 Dimensions: Length (mm) 4655, width (mm) 1250, height (mm) 2151, weight (kg) 2907 Connection Rp 3" Podpfjp H S Umsx Ah Aogu Serial No.: 2200369334 Year of manufacture 2021 Condition: Optically 2, Technically ok (used) Price: on request (Subject to technical changes and prior sale!) Used machines may have optical defects due to their use. Location: MTA Germany GmbH, 41334 Nettetal

Condition: used, This listing is for the Binder BF115 Incubator The unit is in full working condition and is ready for immediate use BINDER BF 115 – e Series Forced Convection Incubator The BINDER BF 115 incubator from the e series is designed for precise and gentle incubation applications in laboratories where performance, uniformity, and reliability are critical. Work particularly well under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery time. Key Performance Features Temperature Range: Ambient +8 °C to 100 °C – ideal for a wide variety of microbiological, bacteriological, and stability testing. Excellent Uniformity & Stability: ±0.3 K uniformity at 37 °C ±0.1 K fluctuation at 37 °C ±1.6 K uniformity at 100 °C Fast Heating & Recovery: Heats to 37 °C in ~8 minutes Recovers in ~3 minutes after a 30-second door opening Design & Control Highlights e™ Technology: Ensures uniform temperature distribution across all shelves – even with full chamber loads. Forced Air Convection: Enables efficient heat transfer and consistent conditions throughout the chamber. Disinfection Routine: Built-in 100 °C sterilization cycle for internal decontamination. User Interface: Intuitive LCD controller with programmable timer, USB port for data logging, and electromechanical exhaust flap control. Safety Thermostat: Class 3.1 safety (DIN 12880 compliant) with visual alarm for over-temperature protection. Internal Viewing: Transparent inner glass door allows sample observation without disturbing internal environment. Technical Specifications Feature Details Chamber Volume 114 liters Temperature Range Ambient +8 °C to 100 °C Internal Dimensions 550 × 550 × 380 mm (W×H×D) External Dimensions 710 × 725 × 605 mm (W×H×D) Power Supply 230 V, 0.4 kW, 6.3 A fuse (also available in 120 V) Noise Level 43 dB(A) typical Weight ~54 kg Shelves 2 chrome-plated shelves (up to 5 possible) Energy Consumption ~60 Wh/h @ 37 °C; ~235 Wh/h @ 100 °C Applications & Benefits Psdpfexhfz Tsx Ah Ajgu Use Cases: Ideal for microbiology, bacteriology, tissue culture, stability testing, and pharmaceutical incubation. Scalable Performance: Optimized for full load conditions and large batch throughput without compromising performance. User-Friendly: Stackable, ergonomic handle design, easy-to-clean stainless steel chamber with no fixed fixtures. Highly Reliable: Rapid recovery and precise temperature regulation for reproducible results, even with frequent door openings.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: TET201P3-20 - 2200388835, cooling capacity: 44.2 kW (60.10 HP), type of input current: three-phase, type of cooling: water, overall weight: 998 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 7.53 m³/h, pump pressure: 2.67 bar, total width: 866 mm, total length: 2,250 mm, total height: 2,054 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process Chiller / Air-cooled Water Chiller, Type: TAEevo Tech 201P3-20 – 44.2 kW Chiller, MTA S.p.A. TAEevo Tech 201 P3-20 units are compact, air-cooled water chillers designed for outdoor installation (operating range: -20°C to +46°C). Included features: crankcase heater, phase monitoring, 350 liter buffer tank, integrated P3 circulating pump, and winter control (condenser pressure regulation). Chilled water outlet temperatures from -10°C to +30°C can be set. Cooling capacity: 44.2 kW Chilled water temp. (inlet/outlet, °C): 12 / 7 Flow rate (m³/h): 7.53 Available pump pressure (bar): 2.67 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3, Pedpew Dddujfx Ah Aegu Max. power consumption (kW): 23.69 Max. current (A): 39.83 Starting current circuit (A): 134.4 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 998 Connection: Rp 2" Serial number: 2200388835 Year of manufacture: 2022 Condition: Visual 2, Technically OK Used Price: On request in EUR (plus VAT, ex works Nettetal) – 3 months warranty Used machines may show visual defects due to prior use. (Technical specifications subject to change and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, This listing is for the Binder BF115 UL Incubator / Oven The unit is in full working condition and is ready for immediate use BINDER BF 115 UL – Forced Convection Incubator The BINDER BF 115 incubator from the e series is designed for precise and gentle incubation applications in laboratories where performance, uniformity, and reliability are critical. Work particularly well under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery time. Key Performance Features Temperature Range: Ambient +8 °C to 100 °C – ideal for a wide variety of microbiological, bacteriological, and stability testing. Excellent Uniformity & Stability: ±0.3 K uniformity at 37 °C ±0.1 K fluctuation at 37 °C ±1.6 K uniformity at 100 °C Fast Heating & Recovery: Heats to 37 °C in ~8 minutes Recovers in ~3 minutes after a 30-second door opening Design & Control Highlights e™ Technology: Ensures uniform temperature distribution across all shelves – even with full chamber loads. Forced Air Convection: Enables efficient heat transfer and consistent conditions throughout the chamber. Disinfection Routine: Built-in 100 °C sterilization cycle for internal decontamination. User Interface: Intuitive LCD controller with programmable timer, USB port for data logging, and electromechanical exhaust flap control. Safety Thermostat: Class 3.1 safety (DIN 12880 compliant) with visual alarm for over-temperature protection. Internal Viewing: Transparent inner glass door allows sample observation without disturbing internal environment. Technical Specifications Feature Details Chamber Volume 114 liters Temperature Range Ambient +8 °C to 100 °C Power Supply 120 V, 12.5 A fuse (NB At this time we also have in stock 230 V See BF115) Noise Level 43 dB(A) typical Pgsdpfx Asxhfz Heh Aju Weight ~54 kg Shelves 2 chrome-plated shelves (up to 5 possible) Applications & Benefits Use Cases: Ideal for microbiology, bacteriology, tissue culture, stability testing, and pharmaceutical incubation. Scalable Performance: Optimized for full load conditions and large batch throughput without compromising performance. User-Friendly: Stackable, ergonomic handle design, easy-to-clean stainless steel chamber with no fixed fixtures. Highly Reliable: Rapid recovery and precise temperature regulation for reproducible results, even with frequent door openings.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: TET502P3 - 2200403312, cooling capacity: 105 kW (142.76 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,748 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 17.9 m³/h, pump pressure: 3.42 bar, total width: 1,255 mm, total length: 3,298 mm, total height: 2,119 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / air-cooled water chiller Model: TAEevo Tech 502 + P3 Manufacturer: MTA S.p.A. The TAEevo Tech 502P3 is a compact, air-cooled water chiller designed for outdoor installation (operating range: -20°C to +46°C). Adjustable chilled water outlet temperatures from -10°C to +30°C. Includes crankcase heater, phase monitoring, 500-liter buffer tank, and integrated P3 circulation pump. Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 105 kW Chilled water temperatures (outlet/inlet): 7°C / 12°C Flow rate: 17.9 m³/h Available pump pressure: 3.42 bar Ambient temperature: 32°C Refrigerant: R410A Electrical specifications: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power consumption: 55.09 kW Max. current: 93.06 A Starting current: 191.65 A Protection class: IP54 Dimensions: Length: 3298 mm, Width: 1255 mm, Height: 2119 mm Weight: 1748 kg Connection: Rp 2 1/2" Serial no.: 2200403312 Year of manufacture: 2023 Podot Hr N Iopfx Ah Aegu Condition: Excellent visual appearance, technically in order Stock item, as new Price: On request in EUR (plus VAT, ex works Nettetal) – 12-month warranty (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, This listing is for the Grant T100 12L Heating Circulating Bath The unit is in full working condition and is ready for immediate use Pgsdpfxsxhfyij Ah Asu Grant T100 12L Heating Circulating Bath – Stainless Steel Tank The Grant T100 12L Heating Circulating Bath is a robust, precise temperature control system combining the T100 Optima circulator with a 12-litre stainless steel tank. Ideal for laboratories requiring high stability and reliability for routine heating applications, it’s designed for use across many scientific disciplines. Key Features Temperature Range: +5 °C to 99 °C (cooling via immersion coil available) Capacities: 12 L Stainless Steel Tank: Durable, easy to clean, resistant to corrosion Temperature Stability: ±0.05 °C Temperature Uniformity: ±0.1 °C Heating Power: ~1.3 kW Controller: Grant T100 Optima circulator

Condition: used, This listing is for 1 of 2 Quattro Fluid SystemFlow 1000S These units is in full working condition and is ready for immediate use Overview & Application The Quattroflow 1000 S is a quaternary (four‑piston) diaphragm positive‑displacement pump—engineered for gentle, sterile handling of shear‑sensitive fluids such as proteins, vaccines, cell suspensions, and other biopharmaceutical or food-grade products. Its design features—like seal‑less operation, low shear, low pulsation, and dry‑run capability—make it ideal for critical applications including: Filtration systems: Tangential‑flow filtration (TFF), recirculation pumps, filter cartridges Pgjdpfsxhfp Rox Ah Aeu Chromatography: Gradient mixing and feed pumps Centrifuge feeding and homogenization Aseptic filling lines and other sensitive processing tasks Commonly processed media include albumin, IgG antibodies, enzymes, vaccines, cell and virus suspensions, dairy products, and cosmetic or polymeric solutions. Technical Specifications Here’s what’s known about its performance and build: Flow rate: Continuously variable between ~25 to 1000 L/h (at atmospheric pressure); around 750 L/h at 6 bar (depending on configuration) Max Pressure: Up to 6 bar, with high‑pressure variants available upon request Drive mechanism: Four‑piston diaphragm setup actuated by an eccentric shaft; standard variant uses a 5° eccentric shaft reaching up to 1,800 rpm Material & Construction: Pump head: Stainless steel grades 1.4435 or 1.4539, optional alternatives (like PEEK) available Membranes: Santoprene (diaphragm), EPDM (valve membranes) Priming and Pumping Features: Self‑priming, dry‑run capable Four directional porting—pump orientation flexible No shaft seals or wetted rotating parts, minimizing wear and product heating Internal volume (filling volume): Approx 35 mL; designed to minimize dead volume and aid product recovery Connections: Standard ¾″ TC (Tri‑Clamp) sanitary ferrule; other flange types available Dimensions & Weight: Pump: 523 × 155 × 212 mm, ~23 kg Control unit (frequency inverter): 350 × 155 × 212 mm, ~6 kg Electrical: 230 V AC (50 Hz) via a control box with 6.3 A fuse; motor IP54, control box IP53 Key Advantages This model offers several standout benefits: Gentle, high‑integrity fluid handling—ideal for fragile biologics due to low shear and pulsation Contamination-free design—no mechanical seals, minimal abrasion Robust operation—powerful 370 W motor, simplified maintenance with fewer parts Aseptic and sterile process readiness—autoclavable, self‑draining, hygienic construction Installation adaptability—four flow directions, small footprint, flexible hookups

Condition: used, This listing is for the Thermo Scientific Precision CIR19 Heated Circulating Bath The unit is in full working condition and is ready for immediate use The Precision CIR‑19 is a robust and reliable lab tool tailored for high-precision temperature-sensitive workflows. Its strengths include excellent uniformity, precise digital control, safe operation features, and ease of maintenance. Whether you're incubating samples or performing delicate assays, it’s built to deliver consistent, reproducible results Overview & Applications Pjdpfxsxhfpwj Ah Asgu The Precision CIR‑19 is a high-performance 19 L (5 gal) circulating water bath engineered for applications demanding strict temperature uniformity and control—think enzyme reactions, serological assays, or any sensitive method where thermal consistency matters. Key Features Perimeter-directed water flow for superior temperature uniformity. Coil-free internal design, making cleaning and maintenance a breeze. Microprocessor-based digital control, displayed via a monochrome LCD. Auto-on/auto-off timers and audible alarms, enhancing scheduling and safety. Low-fluid (dry-run) protection, guarding against overheating or damage. Hinged lid with extended height, ideal for accommodating taller labware. Supplied with a stainless steel gable cover, diffuser tray, and the quirky but useful rubber duck.

Condition: used, This listing is for 1 of 2 Applikon BioPilot 70L Fermenter. The unit is in full working condition and is ready for immediate use Overview The Applikon BioPilot 70L is a fully integrated, pilot-scale fermentation system designed for microbial and cell culture applications in research, development, and small-scale production. Manufactured by Applikon Biotechnology, a global innovator in advanced bioreactor systems, the BioPilot 70L offers exceptional flexibility, process control, and scalability—bridging the gap between laboratory and production environments. Key Features Advanced Bioprocess Technology Precision Control: Integrated control of key parameters such as pH, dissolved oxygen (DO), temperature, agitation, and feed rates. Scalable Design: Built to mimic laboratory-scale conditions, enabling seamless scale-up to production volumes. Modular Automation: Compatible with Applikon ez-Control, DeltaV, or Lucullus® PIMS for sophisticated process control and data management. High-Quality Construction 70L Total Volume (50L Working Volume): Ideal for pilot studies, process optimization, and small-batch production. 316L Stainless Steel Vessel: Electro-polished and cGMP-compliant for pharmaceutical and biotechnological use. Jacketed Design: Enables precise temperature control via thermal fluid circulation. Technical Specifications Model: BioPilot 70L Total Volume: 70 liters Working Volume: 50 liters (typical) Vessel Material: 316L stainless steel, electro-polished Control Options: ez-Control, DeltaV, Lucullus® Sterilization: In-situ sterilizable (SIP) and Clean-in-Place (CIP) compatible Pgedjxhfngspfx Ah Aju Ports: Multiple ports for probes, additions, sampling, gas inlets/outlets Applications Biopharmaceuticals: Production of recombinant proteins, enzymes, vaccines Industrial Biotechnology: Fermentation of bio-based chemicals and specialty metabolites Food & Beverage: Cultivation of probiotics and functional ingredients Academic & R&D: Process development, scale-up studies, and microbial strain screening System Components 70L stainless steel fermentation vessel (jacketed) Modular control tower or integrated skid system Peristaltic pumps for acid/base, antifoam, and nutrient feed Autoclavable or SIP-compatible sensors for pH, DO, temperature, and level Gas flow control via mass flow controllers (MFCs) or rotameters Harvest and sampling ports, exhaust condenser, and sterile connections Quality Assurance Applikon fermentation systems are engineered and manufactured under strict quality control standards, ensuring full cGMP and FDA compliance where required. Factory Acceptance Testing (FAT), documentation, and validation support are provided for regulated environments. Benefits Flexible Configuration: Customizable to meet process-specific requirements Reliable Scale-Up: Accurate replication of lab-scale conditions in pilot volumes High-Level Automation: Advanced monitoring and control systems for optimized yields Ease of Integration: Compatible with existing bioprocess infrastructure Compliance-Ready: Suited for regulated production and research environments Conclusion The Applikon BioPilot 70L Fermentation System is the perfect solution for companies and institutions needing a reliable, scalable, and compliant bioreactor platform. With precise control, robust construction, and full integration capability, it empowers bioprocess development from the lab bench to commercial readiness.

Condition: used, This listing is for the Grant GD120 Water Bath/Circulator The unit is in full working condition and is ready for immediate use The Grant GD120 is a digitally controlled stirred water bath and circulator ideal for laboratory use, offering high precision and flexibility. Here's a breakdown of its features and capabilities: Key Features Pgodpfx Aoxhfl Ejh Asu Immersion Thermostat with Intelligent Control Optimisation (ICO): Enables adaptive PID control for exceptionally stable temperature regulation. Integral Pump: Built-in circulation pump with a maximum flow rate of 17 L/min, allowing both sample immersion and external fluid circulation. User Interface: Equipped with a clear digital display, a rotor plus two-key control, timer function for reaction timing, and visual + audible alarms to notify operators of critical conditions. Preset Temperature Control: Supports one adjustable operating setpoint plus three preset temperature options for fast switching. Safety Features: Includes float-switch low liquid protection and an adjustable over-temperature cut-out for sample and user safety. Liquid Type Selection: Automatically adjusts heater power and temperature parameters depending on chosen liquid (e.g., water, oil, glycol mixtures). Temperature Range & Accuracy Plastic Tanks (P-series): From around ambient +5 °C up to ~99 °C. Stainless Steel Tanks (S-series): From –15 °C up to ~120 °C. High Stability: ±0.02 °C for stable temperature control. Technical Specifications & Obsolescence The GD120 series includes multiple tank sizes: plastic tanks (P5, P12, P18) and stainless steel tanks (S5, S12, S18, S26, S38), offering varied capacities for different lab needs. This series is now considered obsolete, though it remains functional and reliable for many applications. Supporting Documentation & Manual Operating Manual: The GD120 is covered by the general purpose stirred thermostatic baths manual (shared with GD100), outlining temperature settings, calibration procedures, safety guidance, and maintenance. Datasheet Summary: Positioned within the broader Grant Optima product range, the GD120 sits between simpler (GD100, up to 100 °C) and higher-spec models (GR150 up to 150 °C, GP200 up to 200 °C)

Year of construction: 2002, condition: used, This listing is for the Ehret STE 1610/2/100 Sterilising Oven. The unit is in full working condition and is ready for immediate use. Overview The Ehret STE 1610/2/100 Sterilising Oven is a high-performance dry heat sterilizer designed for reliable and consistent sterilization of laboratory and pharmaceutical materials. Manufactured by Ehret, a trusted German brand in thermal processing equipment, the STE 1610/2/100 delivers precise temperature control and robust performance, making it ideal for applications requiring sterilization without moisture, such as glassware, metal instruments, and heat-stable laboratory components. Key Features Precise Dry Heat Sterilization High-Temperature Range: Operates up to 250 °C, suitable for complete sterilization and thermal decontamination. Uniform Temperature Distribution: Advanced air circulation ensures even heat distribution throughout the chamber. Validated Sterilization Cycles: Ideal for sterilizing glass, metal tools, and other heat-resistant materials with accuracy and repeatability. Robust Construction & Ergonomic Design Durable Stainless Steel Chamber: Corrosion-resistant and easy to clean, suitable for repeated sterilization cycles. User-Friendly Controls: Digital temperature controller with display for accurate setpoint adjustment and monitoring. Safety Features: Over-temperature protection, door interlock, and visual/audio alarms for enhanced operational safety. Technical Specifications Model: STE 1610/2/100 Temperature Range: Ambient +5 °C to 250 °C Chamber Volume: Approx. 100 litres Heating Method: Electrically heated with forced air circulation Temperature Control Accuracy: ±1 °C Construction: Stainless steel inner chamber; powder-coated steel exterior Control System: Digital PID controller with safety cut-off and time functions Power Supply: 230 V / 50–60 Hz (depending on configuration) Applications Pharmaceutical Laboratories: Dry sterilization of vials, stoppers, and instruments Medical Facilities: Sterilizing surgical tools, metal parts, and reusable components Research & Diagnostics: Sterilization of labware and experimental setups Industrial & QA Labs: Heat treatment, drying, and thermal conditioning of materials System Components Electrically heated drying/sterilization chamber Forced air circulation fan for uniform heating Digital control panel with setpoint and actual temperature display Safety thermostat with alarm system Removable shelving for flexible loading Quality Assurance All Ehret STE ovens are manufactured in compliance with DIN and ISO standards and undergo rigorous quality testing at the factory. Designed for reliable long-term use, the units support calibration, validation (IQ/OQ), and GMP documentation where required. Pgsdpfxjxhflxo Ah Aou Benefits Reliable Sterilization: Proven performance across thousands of cycles Accurate & Uniform Heating: Ensures consistent results and safe sterilization Low Maintenance: Durable components and easy-to-clean surfaces Safety-Compliant: Built with laboratory and industrial safety standards in mind Compact Footprint: Fits easily into lab or cleanroom environments Conclusion The Ehret STE 1610/2/100 Sterilising Oven is a dependable, precision-controlled dry heat sterilizer built for modern lab and pharmaceutical environments. Its combination of German engineering, validated performance, and operator-friendly design makes it a trusted solution for high-integrity sterilization processes.

Condition: used, This listing is for the Thermo Scientific Vanquish UHPLC Sytem The unit is in full working condition and is ready for immediate use Overview: Thermo Scientific Vanquish UHPLC Systems 1. Autosampler Purpose: Introduces the sample into the mobile phase stream automatically. Picks up sample from vials, plates, or tubes Injects with high precision (often nL to µL volume range 2.Pump Module Purpose: Delivers the mobile phase (solvent) through the system at high pressure. Binary pump: Mixes two solvents at high pressure. Ideal for fast gradients. Quaternary pump: Mixes up to four solvents at low pressure. More flexible, but slower gradients. Controls flow rate (e.g., 0.001–5.000 mL/min) Enables gradient elution (changing solvent composition over time 3.Detector Module (x2) Purpose: Detects and measures analytes as they elute from the column. Diode Array Detector (DAD/UV-Vis) – most common; detects UV-absorbing compounds Fluorescence Detector – for fluorescent compounds Charged Aerosol Detector (CAD) – universal detection for non-UV compounds Refractive Index Detector – for sugars, polymers MS (Mass Spectrometer) – advanced, highly sensitive detection Thermo Fisher’s Vanquish platform includes several variants tailored to different analytical needs—from routine HPLC to ultra-high-throughput and low-flow LC–MS workflows: Vanquish Flex UHPLC: Offers flexible HPLC/UHPLC method development and operates up to 1000 bar. It supports binary, quaternary, and dual pumps, plus intelligent tools like solvent monitoring and optional touchscreen interface. Vanquish Horizon UHPLC: Built for maximum performance, offering ultra-high pressure (up to 1500 bar), ultra-low gradient delay volume, biocompatible flow paths, and exceptional retention time stability and detector sensitivity. Vanquish Neo UHPLC: Designed for next-gen low-flow LC‑MS workflows (nano‑ to micro‑flow), delivering high‑sensitivity, high‑robustness separations. Vanquish Analytical Purification LC: Specialized for precise fractionation—high pressure (700–1500 bar), customizable flow (up to 10 mL/min), integrated fraction collector, multimodal detection, and advanced automation. Key Features Across the Platform Modular Design: Choose components (pumps, samplers, detectors, thermostatting units) to configure a tailored system. Most models offer biocompatible flow paths and Viper fingertight fittings for low dead‑volume, tool‑free setup. Temperature Control: High-performance column compartments with active/passive heating, pre‑heating, and post‑column cooling to manage frictional heating and improve reproducibility. Pgedpfx Ahsxhfkzo Aou Detection Options: Available detectors include Diode Array (with LightPipe optics for superb sensitivity), Charged Aerosol Detector (CAD) for near‑universal detection, fluorescence, multi‑wavelength, refractive index, and mass spectrometry detection. Software Integration: Fully compatible with Chromeleon CDS (with SII for streamlined MS integration), plus Xcalibur and TraceFinder for LC‑MS workflows. MS Integration: Vanquish systems interface seamlessly with Thermo MS platforms—Triple Quadrupole and Orbitrap—for sensitive, accurate mass analysis. Operational ROI: Thermo highlights reduced unplanned repairs, improved productivity, and net-zero ambitions through renewable-powered manufacturing.

Condition: used, This listing is for the LEEC P33 Mk 11 Proportional Temperature Controller The unit is in full working condition and is ready for immediate use LEEC P33 Mk 11 Proportional Temperature Controller (Precision Incubator) This unit is a microprocessor-based PID (Proportional‑Integral‑Derivative) temperature controller, designed to deliver exceptionally stable temperature regulation within the LEEC P33 Precision Incubator. Key Features & Performance Highly Accurate Regulation: Maintains temperature within ±0.1 °C at 37 °C—ideal for sensitive biological and laboratory applications. Dual Temperature Display: Clearly shows both the user-set "target" and the current "actual" temperature on a digital LED display, with indicators for when heating is active. Proportional (PID) Control: Employs PID control through low-wattage heating elements profiled to avoid hot spots. This ensures smooth transitions and precise thermal stability. Fast Recovery & Uniformity: Recovery Time: Approximately 6 minutes to return to set temperature after door opening. Uniformity: Achieves ±1.0 °C variation across the chamber. Fan-Assisted Circulation: Twin fans create gentle, full-width airflow; fans automatically shut off when the door opens to reduce heat loss. Safety Cut-Out: A digitally adjustable over-temperature safety cut-out prevents accidental overheating; visual indicators and alarms streamline monitoring. Context: P33 Precision Incubator Specifications Temperature Range: From at least 5 °C above ambient up to +60 °C. Capacity & Construction: Chamber Volume: 730 litres, built from stainless steel. Pgedpfxoxhfi Ro Ah Aeu Dimensions: External—1550 × 1270 × 660 mm; Internal—1275 × 1140 × 490 mm. Weight: 225 kg. Mobility: Castor wheels are included—lockable for stability. Power: 600 W rating for heating operation. Optional Accessories: Additional shelves (L3) Internal power point (PP) External cooling unit required for operation near or below ambient temperature (e.g., LEEC recirculating cooler) Summary The LEEC P33 Mk 11 proportional (PID) temperature controller offers precise, stable, and responsive control—maintaining ±0.1 °C at 37 °C with fast recovery and uniform temperature distribution. It features handy dual displays, safety cut-outs, and is complemented by a robust chamber design. Perfectly suited for high-demand laboratory and incubation applications.

Condition: used, This listing is for the Labcold RLVF1514 Sparkfree Freezer The unit is in full working condition and is ready for immediate use The RLVF1514 is part of Labcold’s Spark‑free series, designed with safety as a priority for laboratories handling dangerous or sensitive chemicals. All components that could cause sparks—like thermostats—are situated outside the freezer chamber, reducing ignition risk. Internal construction supports spark-free operation, making it ideal for volatile material storage. Podpfxsxhfi Ds Ah Asgu Key Features & Technical Specs Temperature Range: Adjustable from –12 °C to –24 °C (factory default –20 °C Capacity: Approximately 400 litres—spacious enough for serious lab storage needs Shelving: Comes with fixed shelves for organized storage Safety & Alerts: High and low-temperature alarms Door-open alarm Minimum and maximum temperature logging Design & Build: Clear digital temperature display Manual defrost system for easy maintenance and efficiency Solid hinged door with lock for security Exterior: white painted steel—durable and easy to clean Dimensions & Weight: Approx. H 1855 × W 600 × D 585 mm, weight ~79 kg (some sources mention 90 kg)

Condition: used, This listing is for the Unity Scientific Spectra Star 2600XT bench‑top near‑infrared (NIR) analyzer The unit is in full working condition and is ready for immediate use The SpectraStar 2600XT‑is a high-performance, bench‑top near‑infrared (NIR) analyzer developed by Unity Scientific, designed for rapid, versatile compositional analysis across a wide variety of sample types, including solids, slurries, and liquids. Overview & Key Features Design & Functionality Dual Convection Technology: Offers adjustable fan speed from 0 % (natural convection) to 100 %, enabling tailored air circulation depending on the sample type or protocol Temperature Range: Operates from 5 °C above ambient up to 105 °C, making it suitable even for drying tasks Temperature Uniformity & Stability: With fan off: ±0.6 °C spatial uniformity With fan at full speed: ±0.2 °C to ±0.4 °C uniformity (at 37 °C) Temporal stability: ±0.1 °C (at 37 °C) Capacity & Build Interior Volume: 178 L (about 6.3 cubic feet) Shelving: Comes with 2 stainless-steel shelves (each supporting up to ~25 kg) and can accommodate up to 19 shelves for flexible arrangement Construction: Corrosion-resistant stainless steel interior (AISI 304) with easy-to-clean rounded corners Controls & Usability Controller: Microprocessor-based with a clear vacuum fluorescent display for easy setting of temperature, timers, and monitoring Timer Functionality: Programmable daily, weekly, or real-time ON/OFF cycles for scheduling experiments Extras: Internal power socket (120 V models) for operating devices like shakers or stirrers inside the chamber Internal glass viewing door and optional internal lighting for observing samples without opening the chamber RS‑232 interface for data logging and connectivity Stackable design without tools—efficient laboratory space use Safety & Maintenance Alarms: Automatic over- and under-temperature alert system protects sample integrity Security Model (IMH180‑S): Adds a lockable outer door and audible alarms for door‑open conditions Includes a certified 140 °C decontamination cycle (about six hours) to sterilize the chamber without needing an autoclave—ideal for high‑sterility environments Dimensions & Electrical Specs Pgedjxhd I Sopfx Ah Aeu Feature Specification Exterior (W × D × H) 64 × 74 × 92 cm (25.2 × 29.1 × 36.2 in) Interior (W × D × H) ~46 × 54 × 70 cm (18.3 × 21.4 × 27.9 in) Weight ~70 kg (154 lb) Electrical (120 V) 1,020–1,390 W; 8.5 A at 60 Hz Materials Stainless steel (interior), durable housing Summary The Thermo Scientific Heratherm IMH180 is a high-performance, reliable incubator tailored for demanding laboratory tasks: Precision: Excellent temperature control and uniformity. Flexibility: Adjustable airflow, generous interior volume, and timer options. Convenience: Viewing window, internal socket, and connectivity via RS‑232. Cleanability & Space Efficiency: Stainless steel interior and stackable design. Advanced Safety (Security Model): Door alarms, lockable access, and high-temperature decontamination. Perfect for microbiology, cell culture, pharmaceutical testing, and drying applications where sample integrity and process control are critical.

Condition: used, This listing is for the Thermo Scientific Heratherm IMH180 Incubator The unit is in full working condition and is ready for immediate use The Thermo Scientific Heratherm IMH180 is a high-performance, reliable incubator tailored for demanding laboratory tasks: Precision: Excellent temperature control and uniformity. Flexibility: Adjustable airflow, generous interior volume, and timer options. Convenience: Viewing window, internal socket, and connectivity via RS‑232. Cleanability & Space Efficiency: Stainless steel interior and stackable design. Advanced Safety (Security Model): Door alarms, lockable access, and high-temperature decontamination. Perfect for microbiology, cell culture, pharmaceutical testing, and drying applications where sample integrity and process control are critical. Design & Functionality Dual Convection Technology: Offers adjustable fan speed from 0 % (natural convection) to 100 %, enabling tailored air circulation depending on the sample type or protocol Temperature Range: Operates from 5 °C above ambient up to 105 °C, making it suitable even for drying tasks Temperature Uniformity & Stability: With fan off: ±0.6 °C spatial uniformity With fan at full speed: ±0.2 °C to ±0.4 °C uniformity (at 37 °C) Temporal stability: ±0.1 °C (at 37 °C) Capacity & Build Interior Volume: 178 L (about 6.3 cubic feet) Shelving: Comes with 2 stainless-steel shelves (each supporting up to ~25 kg) and can accommodate up to 19 shelves for flexible arrangement Pjdpfx Ahexhd Ixj Ajgu Construction: Corrosion-resistant stainless steel interior (AISI 304) with easy-to-clean rounded corn Controls & Usability Controller: Microprocessor-based with a clear vacuum fluorescent display for easy setting of temperature, timers, and monitoring Timer Functionality: Programmable daily, weekly, or real-time ON/OFF cycles for scheduling experiments Extras: Internal power socket (120 V models) for operating devices like shakers or stirrers inside the chamber Internal glass viewing door and optional internal lighting for observing samples without opening the chamber RS‑232 interface for data logging and connectivity Stackable design without tools—efficient laboratory space use Safety & Maintenance Alarms: Automatic over- and under-temperature alert system protects sample integrity Security Model (IMH180‑S): Adds a lockable outer door and audible alarms for door‑open conditions Includes a certified 140 °C decontamination cycle (about six hours) to sterilize the chamber without needing an autoclave—ideal for high‑sterility environments Dimensions & Electrical Specs Feature Specification Exterior (W × D × H) 64 × 74 × 92 cm (25.2 × 29.1 × 36.2 in) Interior (W × D × H) ~46 × 54 × 70 cm (18.3 × 21.4 × 27.9 in) Weight ~70 kg (154 lb) Electrical (120 V) 1,020–1,390 W; 8.5 A at 60 Hz Materials Stainless steel (interior), durable housin

Condition: used, This listing is for 1 of 2 BWT LOOPO WFI Storage and Distribution System. The unit is in full working condition and is ready for immediate release. Overview This BWT LOOPO system is a high-performance Water for Injection (WFI) storage and distribution solution, designed for reliable and hygienic operation in pharmaceutical and biotech environments. Mounted on a robust stainless steel skid, the unit includes a high-grade stainless steel storage tank, engineered for ambient temperature WFI applications. The system features Siemens HMI controls for intuitive operation and precise system monitoring. Key Features - WFI Storage & Distribution at Ambient Temperature - 30 kW Power Capacity - Siemens HMI Touchscreen Interface - Fully skid-mounted for compact and efficient installation - Stainless steel construction throughout – skid and tank - Ideal for pharmaceutical-grade applications - Designed for continuous circulation to prevent stagnation and microbial growth Pgodpfx Ahoxhdxws Aou Technical Specifications - System Type: Ambient WFI Storage & Loop - Construction: Stainless Steel (Skid & Tank) - Control System: Siemens HMI - Power Supply: 30 kW - Installation Type: Skid-Mounted - Year of Manufacture: 2016 Applications - Pharmaceutical manufacturing - Biotech production facilities - Cleanroom and GMP environments - Laboratories requiring sterile WFI distribution