Used Clay Brick Plant for sale (2,943)

Condition: used, Used hydrogen plant designed to produce high purity hydrogen and carbon monoxide from natural gas. Built by Air Liquide and first operated in 2015, shut down in August 2024. Output capacity as follows: - Hydrogen 60000 Nm3/hour with 99.99% purity. Gbedpfxoy Ryrbj Adcen - Carbon monoxide 14500 Nm3/hour with approximately 99% purity. (Actual purity depends on volume of nitrogen in the natural gas feedstock.) - Superheated 40 bar steam by-product. The HyCO plant includes the following (5) main sections: - Syngas generation / steam reforming and steam generation - Gas cooling - CO2 scrubbing - Gas drying and cryogenic dismantling - Pressure swing adsorption (PSA) Also included: sub-systems for provision of operating resources, flare system, process control and safety shutdown system.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 1 x Damak 176-pocket intermediate proofer with adjustable timings for dough resting. Fitted with removeable pockets for ease of cleaning. Model - DM IP 176. Serial number - DM2100043. Date of manufacture - 2021. Input height - 800mm. Output height - 1550mm. Electrical requirements - 415 V / 50 hz / 3 phase. Power - 5 kW / 13 Amps. Gbodox I Sn Nopfx Adcsn Please note - the front panel is missing on this machine (as per photos).

Year of construction: 2014, operating hours: 23,665 h, condition: used, functionality: fully functional, machine/vehicle number: 500273, Industrial water treatment and distillation system for the treatment of industrial wastewater and process water, with integrated control, collection tanks, and a new pump after a recent inspection. DISMANTLING AND LOADING INCLUDED! Manufacturer: H2O GmbH Model: VACUDEST L Machine type: Industrial water treatment system Year of manufacture: approx. 2014 Operating manual available Control with touchscreen HMI USB port available Ethernet port available Serial interface available Industrial PC control New pump installed Inspection recently carried out Collection tank for industrial wastewater available Collection tank for distillate available Tank material: PP gray Medium: Industrial wastewater Medium: Distillate Medium: acidic and alkaline aqueous solution Tank volume, industrial wastewater: approx. 10,280 liters Tank volume, distillate: approx. 10,732 liters Tank volume, VacuCIP tank: approx. 1,306 liters Permissible operating temperature, tank: 40 °C Permissible operating temperature, VacuCIP tank: 80 °C Gbodezcm D Hjpfx Adcen Specific weight, tank: 10.00 kN/m³ Specific weight, VacuCIP tank: 11.00 kN/m³ Permissible operating pressure: 0.00 bar VacuCIP alkaline 1.26 pH value: >12 Concentration: 1:10 Closed industrial design Piping and tank system made of stainless steel and plastic Throughput: 6000 m³/year

Condition: excellent (used), Year of construction: 2021, operating hours: 900 h, functionality: fully functional, overall weight: 26,000 kg, Used Omega J1065S Semi Mobile Jaw Crushing Plant Year 2021 900 Hrs 1000 x 650 Jaw Box (Same as the Extec C10 / Sandvik 241 Box) Complete Plant Consisting Of Grizzly Feeder, Jaw Box, Overband Magnet, Discharge Conveyor, Walkways Gsdpoy Tyt Refx Adcsbn Approx Weight 26 Tonne Comes With Control Panel & Generator Excellent Condition Throughout

Condition: excellent (used), Year of construction: 2010, operating hours: 120 h, functionality: fully functional, power: 1,064 kW (1,446.64 HP), fuel type: gas, output frequency: 50 Hz, Jenbacher J320 GS CHP unit price includes dismantling and loading onto your trucks. Year: 2010 Power: 1064 KW Frequency: 50hz Running hours: 120k (overhaul at 100k) reports available. Currently running Full tech data sheet available. Set in very good condition. Gsdpfxswd Nw Tj Adcsbn Serviced and maintained by engineers. Contact for more info and pictures.

Condition: used, Year of construction: 2008, operating hours: 110 h, functionality: fully functional, power: 834 kW (1,133.92 HP), fuel type: gas, Jenbacher J316 Bio Gas generator containerized set - Manufacturer: Jenbacher - Model: J316 - Hours 110k - Year of Manufacture: 2008 - Rated Output Power: 834 kW - Frequency: 50 Hz - Alternator: Stamford New alt installed 2017 Gbsdpfey S Ttbjx Adcen -XT4 New turbo installed 2k hours ago. Contact for more info.

Condition: good (used), Year of construction: 2022, operating hours: 710 h, functionality: unexamined, Equipment: Methor chain basic package without shredding system - Crawler chassis including 2 driving speeds - Chassis chain 400mm 3-bar - Additional hydraulic connection 70 l/min - 24-V electric control Gbjdpfx Ajvrz Rvsdcsn - Large radio remote control complete - Maintenance-friendly engine compartment with LED light - Folding funnel with path sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange Special equipment: Shredding system size L (8 teeth) Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Irrigation

Condition: used, Year of construction: 2021, operating hours: 5,000 h, Equipment: Basic package Inventhor Type 9 MTU diesel engine 6R1300, 390 kW at 1,700 rpm meets EUROMOT V emissions standard Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW – VARIO - Load sensing system Fuel tank 950 liters Longitudinal belt: belt length 4,450 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electric control Additional electric pump for operating the following functions when the engine is not running. Raise/lower/fold rear belt, open/close comb flap, open/close comb, raise/lower optional permanent magnet belt, raise/lower optional folding funnel Radio remote control complete Large side GRP maintenance doors Maintenance-friendly engine compartment with LED light Hydraulically reversible fan wheel Loading protection on both sides Fire extinguisher Maintenance ladder Tool box Acoustic start-up warning Doppstadt telematics system Paint: RAL2011 deep orange Special equipment: 500 mm chain chassis unit Chain chassis 500 mm flat Crushing system size "L" -VARIOMAT Size "L" - "Limiter" (20 pieces) Rear conveyor length 7 m 1200 mm wide LED light package engine compartment and rear Irrigation with funnel attachment H=300mm Gedpfevnmldox Adcsbn Frame for overband magnet Overband magnet 2 t permanent

Condition: good (used), Year of construction: 2022, operating hours: 2,806 h, functionality: fully functional, Equipment: Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 liters Longitudinal conveyor: length 2,900 mm, width 800 mm Centrally arranged lubrication strips 24V electronic control – additional electric pump to operate the following functions when the engine is off: "raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Gedpfx Aownfwqodcobn Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Special Equipment: Powertrain 310 kW - EV 3-axle drawbar trailer chassis unit Shredding system Size L 600/4 - 30 Z Additional hydraulic connections 35 - 80 l/min Hydraulic drive Rear conveyor 4.9 m Overband magnet neodymium Frame for overband magnet

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Gbedexx Tigepfx Adcon Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: used, Year of construction: 2022, operating hours: 3,250 h, functionality: fully functional, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear/slide strips 24-V electric control system – additional electric pump enables the following functions with engine off: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Gedpfx Aexx N T Isdcjbn Service-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided load protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Painting: RAL2011 deep orange Optional equipment: Driveline 310 kW – EV 3-axle drawbar chassis unit Shredding system Size L-C3 600/4-30Z Size L limiter Auxiliary hydraulic connections 35 – 80 l/min Hydrostatic drive Hopper extension 350 mm, left-side watering Rear conveyor 7 m Overband magnet Neodymium Frame for 7 m overband magnet Central lubrication system Custom paint finish in RAL Delivery date to be arranged

Condition: used, Year of construction: 2022, operating hours: 4,561 h, functionality: fully functional, Basic Package AK565: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC directive 50 mm EC drawbar eye incl. slip-on coupling Tyres: 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side-mounted fenders) Permissible total weight: 19,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT V emission standard Exhaust discharged upwards Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank, 450 L Feed roller: length 1,690 mm, diameter 510 mm, fitted with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Dopplock system Standard: Flail tip “Streusel plus” Centrally arranged lubrication strips Electric pump for operating cylinder functions (e.g. raising/lowering the support leg and opening/closing the rear basket, folding/unfolding the rear conveyor, releasing the drive) when engine is stationary 24 V electrical control system Separate control panel at the rear of the machine Hydraulically folding fine shredding basket “Multimesh” (mesh sizes between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Chain drive for feed roller and scraper floor Complete radio remote control Drive preparation Gbodpfx Aoyhckmsdcjn Rear discharge conveyor, 4 m long, 1,800 mm wide “classic” Anti-magnetic centre section on the discharge conveyor Reinforcement plates (Hardox) on both sides of feed hopper sidewall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Finish: RAL2011 deep orange Optional Equipment: Hydraulic drive 600 L fuel tank Flail tip C1 “Bear Paw” with carbide insert Rear discharge conveyor 4 m, belt width 1,800 mm, lowerable Neodymium magnetic pulley incl. chute Separate drive for feed roller and scraper floor (“Twin Drive”) Duomatic coupling Smooth impact plate Fine shredding basket Delivery date by arrangement

Condition: used, Year of construction: 2022, operating hours: 1,518 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Godpfx Adsxx N Dgjcjbn Delivery date by arrangement

Condition: used, Used biodiesel plant made by Biodiesel Fuels Equipment Ltd UK in 2012 and shut down in 2021. Gbjdpfx Asyhc Rgedcjn Plant capacity is 10,000 litres/8 hour day up to 25,000 litres/day if run for 24hours. It has been used to process used sunflower and palm oil. Equipment includes: (3) separators, (2) reactors, (2) ionisers, (2) oil preparation vessels, (1) methanol preparation vessel, (1) tank for biodiesel.

Condition: used, Year of construction: 1988, turning speed range 0 - 1.500 U/min curb weight 240 kg engine output 1,7 kW Gsdozczh Hopfx Adcjbn In our assessment, the machine is in good used condition and can be inspected under power by appointment. The offer consists of: 1x Vibratory finishing system, CN 150, year of manufacture 1988 1x Trowalpur wastewater treatment system RT 02-SK, year of manufacture 1997 Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Year of construction: 2022, operating hours: 3,863 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 006682, On behalf of our customer, we hereby offer a virtually new OI sorting. This installation can be tested in operation at the customer. Gbodswq D Dnjpfx Adcjn The machines consist of; Sorting oi: 0050 Bunker belt with dosing drum BDF1200/2000*10000 0060 Ascending belt to screen HBT1200/1600*14000 0070 Cardboard screen 1640*7000 Platform Cage ladder 0080 Adjustments to existing paper chain belt 0090 Switch cabinet included Operating hours only 3863 In consultation with the customer and Bollegraaf, a guarantee is possible under certain conditions See the attached PDF for a precise technical description per machine

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, For sale: Semi-mobile crushing and screening plant consisting of: - Hopper - Star screen 0/60 - Binder Bivitec screen 4000/1600 - Percussion crusher 1000/500 - Magnet - Generator set 500 kVA This machine was designed and manufactured by us here in Belgium and is of very professional quality. Gedpjzcm I Sefx Adcjbn It is completely self-sufficient and can even power other components. It is capable of separating soil into fractions of 0/20 and crushing debris into the desired size in a single operation. The complete plant has been thoroughly inspected and put in order for sale. Ready for immediate use. Price on request and negotiable. For further questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2018, operating hours: 3,297 h, functionality: fully functional, Features of the basic unit: Infeed conveyor: •Highly wear-resistant, forged special chain Gsdpfx Adjza S Hnscsbn •Infeed conveyor width: 1,700 mm •Infeed conveyor length: 4,700 mm Hydraulic system: •Infeed roller and infeed conveyor each with a separate drive and gearbox. The speeds of the infeed conveyor and the infeed roller are continuously adjustable. Overload protection through speed monitoring and reversing mechanism. Hydraulic tank with a capacity of 220 liters. Infeed: •The infeed roller is hydraulically driven, pendulum-mounted, and guided by 2 rack and pinion systems. •The infeed opening is approximately 660 mm high and 1,700 mm wide. Hammer mill: •46 hammers, hammer width: 80 mm •Hammer tips can be individually replaced •Hammer mill width: 1,700 mm •Rotor diameter: 999 mm •Rotor speed: 1,000 rpm Motor: •SCANIA turbo diesel with a power output of P = 478 kW, compliant with current Euro emission standards Drive: •Direct drive via 8 V-belts Hopper dimensions: •Hopper opening length: 4,800 mm •Hopper opening width: 2,400 mm Throughput capacity: •200-300 m³/h and more, depending on the material Delivery date will be agreed upon.

Year of construction: 2018, operating hours: 4,163 h, condition: used, functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 31,500 kg, hopper volume: 7,000 l, machine/vehicle number: PID000123KDGI16212, Belt feeder for stockpiles 2-deck heavy-duty screening machine Engine: Cat-C4.4 Dual power system Hopper extension Telescoping side conveyors Transport dimensions: 15,380 x 2,860 x 3,390 mm (L x W x H) Gbedpfjzbri Ejx Adcsn

Condition: used, functionality: fully functional, power: 90 kW (122.37 HP), fuel type: electric, operation weight: 5,900 kg, Year of construction: 2018, operating hours: 4,997 h, machine/vehicle number: 12663, Steel construction from 2026. Gbjdpfxozbrd Ns Adcon

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake port : 300 mm Gbedpfxjh D If Hs Adcon nominal motor power : 7,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 6000 m³ / h Nominal volume flow : 5.089 m³ / h Negative pressure 2.587 Pa Filter area 30 m² Dimensions (L x W x H) in mm 3.000 x 1.361 x 2.817 Briquetting capacity 30 - 50 kg / h Briquette diameter: 50 mm Weight: 1570 kg Machine is brand new in our STOCK - IMMEDIATELY AVAILABLE - subject to prior sale Location: 54634 Bitburg

Condition: used, power: 268 kW (364.38 HP), color: other, Year of construction: 2020, operating hours: 8,580 h, Number of cylinders: 6 Empty weight: 62.350 kg Dimensions (LxBxH): 190 x 300 x 375 cm Track width: 4 cm Serial number: K0770336 Gbodpfozbi S Rsx Adcen Reading hours: 8580h Crusher hours: 6448h Engine: Scania Engine power: 364Kw Number of cylinders: 6 Generator: 108Kw/135Kva/230/400V/195A/50Hz Prescreening Outfeed conveyor pre-screening Feed crusher dimensions: 1300x900mm Grain return conveyor Magnetic belt Wind sieve Sieve box Discharge belts hydraulic folding Track width: 400mm Remote control available Operating weight: 62350Kg Transport dimensions: approx. 1900x3000x3750mm Remarks: traces of use, breakdown at intake, hourly running, daily use Online auction of construction, agricultural and industrial machinery (including. KLEEMANN mobile impact crushers, JOHN DEERE / DEUTZ-FAHR / CASE / NEW HOLLAND tractors, VOLVO / CATERPILLAR / HITACHI / KOMATSU excavators, MANITOU / GEHL / GIANT / KUBOTA wheel loaders and skid steer loaders, JLG and TEUPEN aerial platforms, DAF / VOLVO hook-arm trucks, ATLAS COPCO and CHICAGO PNEUMATIC mobile compressors, CATERPILLAR / CUMMINS / FG WILSON power generators, BOMAG / HAMM rollers, SINOBOOM scissor elevator, various agricultural machinery and yard and workshop equipment, etc.), with most of the lots located in our own depot in Deinze, Belgium. The online auction opens Monday 1 June and closes Tuesday 23 June. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 22 June Pickup days are on: - Tuesday 30 June - Tuesday 30 June Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2008, operating hours: 5,281 h, * Type: Demag DF 65P * Year of manufacture: 2008 * Power: 52 kW -----Internal vehicle number: 10326----Errors and prior sale excepted. WhatsApp support available! If you have questions about the vehicle or require further information, feel free to contact us conveniently via WhatsApp. Gjdpfey Hblhox Adcjbn Whatsapp German, English -- Whatsapp German, English, Arabic

Condition: excellent (used), Year of construction: 2022, operating hours: 326 h, functionality: fully functional, machine/vehicle number: A20221005, feed length X-axis: 5,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 100 mm, feed rate X-axis: 3 m/min, workpiece weight (max.): 500 kg, working width: 1,300 mm, type of input current: AC, volume flow: 12,000 m³/h, suction capacity: 6,000 m³/h, compressed air connection: 6 bar, For sale is a fully automatic coating system in excellent condition, consisting of the following components: 1 -----VEN SPRAY SMART Spray System----- Year of manufacture: 2019 Feed speed: 1.5-4.0 m/min Working speed: 2.0 m/min Working height: 920±20 mm Working width: 1,300 mm Min. workpiece size: 300x100x10 mm Max. workpiece size: 3,600x1,200x50 mm Coating material: Water-based paints, solvent-based paints Spraying process: Air, Airmix, Airless 326 operating hours 2-----VEN MOVE TRANSFER----- Type: VEN MOVE TRANSFER 180° Year of manufacture: 2022 Length: approx. 6000 mm Width: approx. 8,078 mm Speed: 3.2 m/min Max. load: 20 kg/m 766 operating hours 3 -----VEN TRANS BELT (x3)----- Type: VEN TRANS BELT Conveyor Belt Year of manufacture: 2022 Length: approx. 5,635 mm Outer width: approx. 1,511 mm Working width: approx. 1,300 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m Gbodpfx Ajzcmy Uedcon 766 operating hours 4 -----VEN TRANS BELT with dust protection hood----- Type: VEN TRANS BELT Conveyor Belt Year of manufacture: 2022 Length: approx. 3,800 mm Working width: approx. 1,300 mm Working height: 920±20 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m 5 -----VEN MOVE TRANSFER with drying chamber----- Type: VEN MOVE TRANSFER with drying chamber Year of manufacture: 2022 Length: approx. 6,000 mm Width: approx. 8,078 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m Drying chamber: Manufacturer: Adolph&Co GmbH Min. exhaust air volume: 1,200 m³/h 6 -----Supply air unit HC12----- Manufacturer: Berliner Luft Recirculation air volume: max. 12,000 m³/h Max. heating temperature/heating output: 60°C / 174.14 kW 1620 operating hours -----Technical Features----- - Fully automatic coating process - Multi-layer coating programmable - Automatic control of the entire coating process - 6 freely programmable spray guns - Suitable for water-based and solvent-based paints - Suitable for automated coating processes in industrial applications The system was installed in 2022 and was in operation for only approx. 1 year (326 operating hours on the spray gun drive). It is in very good condition, is fully documented and is ideal for industrial coating processes with high quality requirements. The original investment value in 2022 was approximately €760,000. The selling price is negotiable.

Condition: used, Year of construction: 2020, HTST ARSOPI 500 Litres Pasteuriser built in 2020 by Dairy Machinery UK and Arsopi, This machine is self heated by heating element of 9kw , It is mounted on a stainless steel frame and comes with a control panel, balance tank, auto valves, product and water pump, 1" inlet and outlet pipes which also act as a CIP loop. The complete process is run automatecly with a divert valve to ensure pasteurisation temperatures and milk flow . The machine has hardly had any use and is in perfect condition. We can support this Pasteuriser in full starting from the controls all down to the gaskets of the PHE . Machines that Can Be added with on extra sale are the below : 1) SEPARATOR Specifications Manufacturer :Seital/SPX Model :SE05 Condition : Used Stock Number:834 Gbodpfxoy Ry Hrj Adcjn Manufacture:Seital Capacity : 1200 L/h Cleaning : Manual Cleaning Tools : Included Manual Book : Included Base Frame : Included 2) HOMOGENISER Specifications Manufacturer : GEA Model: NS20002H Year : 2009 Condition : Used Serial Number : 7818 Stock Number 110613074 Capacity : 30 L/H on 600 Bar Capacity : 500 L/H on 200 Bar Working Pressure: 200 to 600 bar Max No. Stages: 2 condition : Very Good condition Available: Immediately SOLD AS A COMPLETE PACKAGE OR SEPARATE Volume capabilities (litres): 500 Balance Tank: Included PHE Temperatures: 4-45-55-65-72-4 Outlets: Separator and Homogeniser Outlets Divert Valve: Included Dimensions in cm : 160 x 80 x 200 Product Pump: Included Hot Water Pump: Included Comtrols: HMI Touch Screen CIP: Program included for self Clean in Place Specifications Manufacturer: Seital/SPX Model: SE05 Condition: Used Stock Number: 834 Manufacture: Seital Capacity: 1200 L/h Cleaning: Manual Cleaning Tools: Included Manual Book: Included Base Frame: Included Manufacturer: GEA Model Homogeniser: NS20002H Year: 2009 Serial Number: 7818 No. Stages: 2 Condition Homogensier: Very Good condition Available: Immediately