Used Cleaning Device for sale (16,428)

Condition: used, Components of a sawing system Manufacturer: Linck Type: VZM & CSMA consisting of: CSMA extraction device Manufacturer: Linck Type: Av / CSMA Year of manufacture: 2018 The CSMA extraction device offers powerful and flexible material handling in automated production lines. It is designed for variable workpiece sizes and ensures continuous material transport. Technical data - Drive power: 4 x 4 kW - Feed rate: 85 m/min VZM centering device Manufacturer: Linck Type: VZM The VZM centering device is designed for precise centering tasks at high feed rates. The robust design allows it to be used under demanding industrial conditions. Technical data Lajdozuz I Nopfx Afwsf - Drive power: 2 x 7.5 kW - Feed rate: 84 m/min Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1999, - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) Panel dividing saw with infeed table and destacking device Manufacturer: Giben Type: Prismatic 2 h100 SPT Year of manufacture: 1999 Technical data - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Clamping chuck opening: 117 mm - Working height: 950 mm - Lifting table dimensions: 1600 x 2700 mm - Max. stack height: 620 mm - Dimensions: 2444 x 1220 mm, 2500 x 1250 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) High-speed saw carriage - 2 guide shafts: 40 mm - Saw carriage drive via frequency-controlled motor - Feed speed: 1 - 100 m/min - Return speed: 100 m/min Adjustment of the saw carriage speed from the control panel. Automatic cutting length control according to the panel dimensions - Scoring saw speed: 5035 rpm - Carbide-tipped saw blade speed: 3760 rpm - Main saw motor power: 11 kW - Scoring saw motor power: 2.2 kW - Main saw blade: 400 mm - Main saw spindle: 75 mm - Scoring saw blade: 215 mm - Scoring saw adjustment from the outside in stepped increments to: 0.025 mm - Changing the main saw and the scoring saw via a quick-release system (pneumatic) Sliding table - Support table in the sliding table area with free-running roller rails - Top-mounted sliding table with 3 floating clamping chucks with patented, foldable lower clamping chuck fingers - Sliding table drive via servomotor - Drive torque: 6.5 Nm - Feed speed: 1 - 60 m/min - Return speed: 60 m/min - Cable routing via drag chain - 2 front aligners Automatic infeed via lifting table - Dimensions: 1600 x 2700 mm - 4-column spindle lifting table with 12 free-running roller groups - Automatic package height counting when lifting the panels via control Lasdpfx Aozuyywofwjf - Min. panel dimensions: 2000 x 1200 mm - Max. stack height without pit: 620 mm - Max. load: 12 t - Infeed height: 330 mm Support table - 2 pcs support table with PVC surface 2000 x 510 mm Machine control G-Drive 1D Extraction - 1 extraction port on the pressure bar: 115 mm - 1 extraction port on the lower side of the machine bed: 200 mm - The chip extraction takes place directly at the saw unit via sheet metal ducts into a chip duct arranged along the saw line, which is sealed with flexible rubber lips. Performance parameters - Average cycle time/saw cut: approx. 25 s Quality - Cutting accuracy: +/- 0.15 mm is guaranteed (for straight panels) - Angularity: +/- 0.15 mm/m Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: new, centre height // mm total power requirement / kW Lasdpfxszcgfqo Afwof weight of the machine ca. / t required space / m Parts machine for lids FP1 / FP2 Condition: NEW

Condition: used, centre height 160 mm chucking diameter 200 mm Ljdpfxezcgb So Afwsaf hollow 54 mm

Condition: used, length 1000 mm width 800 mm height 630 mm weight 460 kg T-slot - width 50 mm Clamping table, clamping plate, T-slot table Dimensions Table length: 1000 mm Table width: 800 mm Lsdpfx Ajgrngdofwsaf Table height: 630 mm T-slot length: 50 mm Weight: 460 kg

Condition: used, / weight 295 kg Center height: approx. 180mm dimension Length: about 480mm Width: about 450mm Height: 280mm Lajdpfx Aeykvbdsfwof Weight: 110kg

Condition: used, / weight 140 kg Lasdpfx Afozcq Hlowof dimension Length: about 430mm Width: approx. 530mm Height: about 370mm Weight: 140kg

Condition: used, length 1020 mm width 580 mm depth 520 mm weight of the machine ca. 590 kg Lsdpfjy Sur Ssx Afwsaf

Condition: excellent (used), length 690 mm thread M16 Lodjzcgk Tspfx Afweaf height 1020 mm weight of the machine ca. 360 kg Angle table with breadboard table LxWxD: 1020x690x40 mm Fixing LxW: 330x690 mm Thread: M16 Weight: 360 kg

Condition: used, / Ljdpfx Aozcq Hxsfweaf weight 75 kg Center height: approx. 215mm dimension Length: about 370mm Width: about 260mm Height: approx. 340mm Chuck diameter: 190mm Lining passage: 60mm Weight: 75kg NEIGHBOR

Condition: used, centre height / mm weight 160 kg chucking diameter 250 mm swiveling dividing head with three-jaw chuck from Forkardt F250 Lodpfoymga Njx Afweaf Chuck diameter: 250 mm Total weight: 160 kg

Condition: used, centre height 250 mm Laedpfxjy Sux Ss Afwof weight of the machine ca. 120 kg Reversible clamp with angle scale and three-jaw chuck Dimensions: Chuck diameter 255 mm 60 mm bore Center height 250 mm Base area 350 mm x 400 mm Item Features: Our offers are used items, i.e. can Soiling, storage marks, damage, such as scratches and color defects may also be present. Errors in technical data and description reserved

Condition: used, length 575 mm width 510 mm height 1015 mm Lajdpfx Ajylz Edefwjf Clamping table, clamping plate, T-slot table Dimensions Table length: 575 mm Table width: 510 mm Table height: 1015 mm

Year of construction: 1987, condition: used, centre height 390 mm passage of steadyrest 220 mm chucking diameter 400 mm total power requirement / kW Laodpfx Afjhgw Uxowof

Year of construction: 1988, condition: used, centre height 140 mm chucking diameter 250 mm swivelling range 90 Grad Laodeipyx Topfx Afwjf weight of the machine ca. 150 kg Dividing head swivable of a Heckert FU 400

Condition: used, Year of construction: 2000, length 800 mm width 800 mm height 1000 mm Ledpsznnd Djfx Afwsaf total power requirement 0 kW weight of the machine ca. 700 kg dimensions of the machine ca. 800 x 800 x 1000 mm

Condition: used, Year of construction: 2000, length 800 mm Lsdsznndqspfx Afwjaf width 1000 mm height 1300 mm total power requirement 0 kW weight of the machine ca. 900 kg dimensions of the machine ca. 800 x 1000 x 1300 mm

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and intensively cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the current operations. Materials are firstly delivered either by manual loading , or by an automatic pnematic box or cage lift/tilt system to a picking belt and metal detection tunnel. Materials then proceed via an inclined conveyor belt to a Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water and any fines. Granulated materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge and all used water is then recirculated to heated tank to be reused. Finished materials then conveyed to a ZigZag air separator for final fines/dust removal before being blown to a cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. Ledpfxoxcnxdj Afwsaf The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment.

Condition: new, workpiece weight (max.): 3,000 kg, – Capacity 3 tons – Workpiece minimum Ø 70 mm – Workpiece maximum Ø 1200 mm – Roller diameter 200 mm – Stepless speed adjustment – Digital speed display – Speed 100/1050 mm/sec Laodpfxswygh Ie Afwof – Foot pedal – Emergency stop – Documentation – 230V

Condition: new, workpiece weight (max.): 1,000 kg, – Capacity: 1000 kg Lasdev A Rrkepfx Afwef – Minimum workpiece diameter: 50 mm – Maximum workpiece diameter: 800 mm – Roller diameter: 250 mm – Infinitely variable speed control – Foot pedal – Emergency stop – Documentation – 230 V

Condition: new, - Load capacity 5000 kg - Workpiece minimum Ø 250 mm - Workpiece maximum Ø 2300 mm - Roller diameter 250 mm Lodpfoqy Nr Hjx Afwjaf - Wireless remote control - Digital speed display - Emergency stop - Documentation - 400V

Year of construction: 2019, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 6, This 6-axis CleanLASER cleanCELL 3220 CL600 was manufactured in 2019. It features a powerful 600 W Q-switched fiber laser, designed for automated laser cleaning and surface treatment of metal components. The system includes a 6-axis industrial robot and a fully aligned beam path for precision cleaning. If you are looking to get high-quality automated laser cleaning capabilities, consider the CleanLASER cleanCELL 3220 CL600 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Application: Automated Laser Cleaning / Surface Treatment of Metal Components • Laser Source: cleanLASER CL600 • Laser Type: Q-switched Fiber Laser • Average Laser Power: 600 W • Wavelength: 1064 nm • Laser Class: Class 4 (Laser Source) • Complete System Classification: Laser Class 1 • Laser Optics: STAMP 25 • Scanner Type: 2D Scanner • Working Scan Field: Approx. 65 × 65 mm • Objective Lens: f = 163 mm • Red Positioning Laser: Yes • Pulse Frequency: Variable • Beam Delivery: Fully Aligned Beam Path • External Fiber Length: Approx. 8 m • Door Interlock Connection: Yes • Remote Diagnostics: TCP/IP / USB • Fieldbus Interface: Profinet • Software: cleanSTUDIO • Telediagnostic Software: CLL Remote Diagnostics • Robot Type: 6-Axis Industrial Robot • Robot Programming: Teach Mode • Robot Gripper: Single Part Gripper • Loading System: Manual Loading • Conveyor System: Bosch T2 Carrier System • Buffer System: Multiple Workpiece Carriers • Unloading: Automatic Conveyor • Conveyor Length: Approx. 2 m • Workpiece Carrier: Not Included • Designed Workpiece Types: 2 • Machine Footprint (W × D × H): Approx. 2,035 × 2,200 × 2,215 mm • Machine Frame: Welded Steel Base Frame • Cell Construction: Aluminium Profiles • Work Table: Aluminium T-Slot Plate • Front Door: Folding Door • Electrical Cabinet: Integrated Double Cabinet • Cabinet Width: 1,200 mm • Cabinet Depth: 800 mm • Cooling Requirement: External Water Cooling ( Lasdpfxjzuy Sto Afwjf

Year of construction: 2021, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC S7-1500, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 3, This 3-axis clean CELL 3220 was manufactured in 2021. It features a powerful 600 W diode-pumped solid-state laser with a wavelength of 1064 nm and an integrated water-to-water cooling system. The machine is equipped with a Siemens control unit and a robust ABB robot for enhanced automation. If you are looking to get high-quality laser cleaning capabilities, consider the Clean Laser clean CELL 3220 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Laser Source: cleanLASER CL600 Mid-Power Laser • Laser Type: Diode-Pumped Solid-State Laser (DPSSL) • Laser Wavelength: 1064 nm • Laser Operation Mode: Pulsed (ns) • Average Laser Power: 600 W ±5% • Alignment Laser Wavelength: 658 nm • Alignment Laser Power: 28 mW • Cooling System: Integrated Water-to-Water Cooling System • Additional Chiller: Cooler ONE Plus Air (Air-Cooled) • Fiber Cable Type: Quartz Fiber Optic Cable • Fiber Length: 10 m • Fiber Geometry: Square • Protective Hose Diameter: 21 mm • Optical System: STAMP 25 2D Optics • Optics Connection: 90° • Focal Length: 163 mm • Control Unit Brand: Siemens • Control Unit Model: SIMATIC S7-1500 PLC • Drive System: Siemens 1FK7 Servo Drives • Linear Axis System: 3-Axis Portal System • Maximum Axis Payload: Approx. 25 kg • Axis Speed (X/Y): >200 mm/s Lsdpfx Afozuy Inowoaf • Communication Interface: Profinet • Digital I/O: Standard • Software: cleanSTUDIO / cleanCONTROL • Industrial PC: 19" Rack PC • SSD Capacity: 256 GB • RAM: 8 GB • Processor: Intel Core i5 (minimum) or equivalent • Robot: ABB Robot • Gripper: 2-Workpiece Gripper • Conveyor System: Bosch TS2 Transfer System • Loading System: Manual Workpiece Carrier Loading • Discharge Conveyor Length: Approx. 4.8 m • Extraction System: ULT Maxi Plus • Fan Capacity: Max. 4,000 m³/h • Maximum Pressure: 3,300 Pa • Filter Cartridges: 4 × 600 mm • Dust Drum Capacity: 200 L • Extraction Power: 5 kW • Power Supply: 400 V, 3-Phase

Year of construction: 2007, condition: used, functionality: fully functional, machine/vehicle number: 420, The washing machine can be inspected while running. It does require some maintenance, but all small parts can still be obtained from the manufacturer. Laodpfx Aszup Haofwof

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Laedsh Nrh Uopfx Afwef Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg