Used Automatic Cleaning System for sale (51,715)

Year of construction: 2024, condition: new, functionality: fully functional, Model: MAS-30-2 Working dimensions (W x H x D): 1200 x 1800 x 300 Drive: Electric Rated power: 21 kW Rated voltage: 380 V Frequency: 50-60 Hz Number of nozzles: 250 pcs Pump: 1200 L/min Dwodpfx Ajcubgpol Sjc Mixing of cleaning agents not possible – separate nozzles Nozzle type: Chemically neutral Operating temperature: 20 - 60°C Number of cleaning cycles: 2 Filling volume: ~1200 L Filtration: Yes Manufacturer's warranty: 12 months

Condition: excellent (used), Year of construction: 2004, Hinst Continuous Cleaning System, Parts Cleaning System, 3.80 x 4.30 x 3.80 m Continuous washing systems from the manufacturer Hinst are designed to process high volumes of parts while meeting the highest cleanliness requirements. 1. Loading and Transport The parts to be cleaned are placed either directly or in special grid baskets (the system has matching baskets with dimensions of 48.5 x 48.5 cm) on a transport system. An integrated roller conveyor or a slat belt automatically transports the parts into the cleaning tunnel. 2. The Cleaning Process in the Tunnel As the parts pass through the system, they sequentially pass through different, separate treatment zones: * Washing & Degreasing: The components are sprayed all around with a hot cleaning solution (consisting of water and special industrial cleaners) using an intensive nozzle system (spray manifold) to remove oils, greases, and chips. * Rinsing: In the next zone, the cleaner residues are rinsed off with clear water. * Drying: At the end of the tunnel, a hot air blower or a blowing zone ensures that the parts come out at the other end of the machine completely dry and clean. 3. Circulation System in the Base Large liquid tanks and pumps are located below the transport level. The wastewater is cleaned via filter systems (to capture chips and dirt) and oil separators and then pumped directly back into the circuit to conserve resources. This tunnel design (the system measures an impressive 3.80 x 4.30 x 3.80 meters when assembled) guarantees a strict separation between the "dirty side" (inlet) and the "clean side" (outlet), which enables a fast cycle time in seconds directly in a production line. System No. 04.333 Dedpog Ipp Ajfx Al Sswc Year of manufacture 12.2004 Dimensions approx. W x D x H: 3.80 x 4.30 x 3.80 m incl. - 6 baskets: basket dimensions: 48.5 x 48.5 x H 26 cm - Roller conveyor 2.10 x 52 x 90 cm The continuous cleaning system has already been professionally disassembled and stored, with a value of €3,500. This is included in the purchase price. You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Year of construction: 2004, Technical details: Dwjdpfjzu St Nex Al Sjc Basket size LxWxH: 530 x 320 x 200 mm Max. basket weight: 50 kg capacity: 4 Körbe/h; baskets/h No. of washing chambers: 1 No. Of tanks for washing: 1 No. Of tnks for conserving: 1 Cleaning medium: Tetrachlorethen Electrical heating power: 42 kW Machine size LxWxH: 4 x 3 x 2 m

Condition: good (used), RSA NC-V 2000 Deburring Machine + Tube Washing System + Coral Filter Complete industrial tube processing and post-processing line The system consists of three high-quality industrial components: 1. RSA RASAPLAN NC-V 2000 – High-performance deburring machine Function: Automatically processes workpiece lengths up to a maximum of 2,000 mm. 2. BOUS (CeBeCo) Rowamat RL 200 – Continuous tube washing system Function: Extremely robust and durable stainless steel welded construction. Accessories: 3. CORAL IperJet DF4 – Cartridge filter dust extraction system Performance: 4 horizontal, high-performance filter cartridges with fully automatic jet-pulse compressed air cleaning (very low maintenance). Function: Reliably extracts brush dust, grinding residue, or fumes from the washing system. The RSA Rasaplan NC-V2000 is a fully automatic, high-performance brush deburring machine, specifically designed for the simultaneous internal and external deburring of tube ends and profiles in an industrial continuous process. The number "2000" indicates the maximum workpiece length of 2000 mm, which can be automatically processed in the standard configuration. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs upon request! Dwodpfx Alezklb Eo Sjc

Condition: used, Bous Waschfix: Industrial Cleaning and Degreasing System This system is ideal for workshops, production facilities, mechanical engineering companies, or automotive repair shops for the automatic and thorough cleaning and degreasing of workpieces, machine parts, and tools. The device cleans highly efficiently using a hot water spray process (up to +70 °C) with environmentally friendly, water-based cleaning agents (pH value 7–11). Thanks to the integrated two-hand safety control and the clear control panel, operation is absolutely safe and straightforward. • Integrated fine filter for a longer service life of the cleaning water and cleaner cleaning results. • Integrated drain pump for effortless draining of the tank during maintenance. • Compressed air blow-out function for subsequent drying of the cleaned components. Djdpjz Nwbmsfx Al Sewc Technical Data Manufacturer: BOUS Cleaning & Degreasing Systems Type / Model: WASCHFIX Year of Manufacture: 2006 Tank Capacity: 100 liters Operating Temperature: up to +70 °C Electrical Heating Power: 6 kW Compressed Air Connection: 6 bar (for blow-out function) Electrical Connection: 230 / 400 V Total Power Consumption: 17 A Control Voltage: 24 V DC / 50 Hz Net System Weight: approx. 500 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz Djdozuygqspfx Al Sjwc • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press Dwedpozlh Aujfx Al Ssc controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 Djdpfx Aleyc H N Nj Sswc • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Year of construction: 2007, operating hours: 8,000 h, condition: ready for operation (used), functionality: fully functional, product height (max.): 80 mm, product length (max.): 80 mm, product width (max.): 80 mm, machine/vehicle number: 26240, This KSN Drum Washer 250 WRD is a used industrial cleaning system designed for reliable and efficient parts cleaning. The drum washing process provides consistent cleaning results while reducing manual handling and can be integrated into existing production lines. Dwedpfxezy Hd Hs Al Soc Choosing a used KSN cleaning system offers a significantly lower investment compared to a new system, combined with proven technology, fast delivery and the possibility of customization to suit the production requirements. KSN drum washers are designed for many years of operation in industrial environments. Standard equipment: Grundfos pump Fully insulated construction Automatic level and pressure monitoring Technical details can be found in the attached PDF document.

Condition: used, This listing is for a Microwave Laboratory Systems MLS Milestone traceClean The traceCLEAN operates as a fully automated, self-contained acid steam cleaning system. Items to be cleaned are placed inside the unit, where freshly distilled acid vapors (typically nitric or hydrochloric acid) are generated and continuously refluxed within a sealed chamber. This process effectively leaches any metal contaminants from the surfaces of the items. After the cleaning cycle, the items are cooled, dried, and stored until needed Dwedpoxzh E Usfx Al Soc

Year of construction: 2005, operating hours: 10,000 h, condition: ready for operation (used), functionality: fully functional, product height (max.): 100 mm, product length (max.): 100 mm, product width (max.): 100 mm, machine/vehicle number: 7614-23, This KSN Drum Washer 350 WRD is a used industrial cleaning system designed for efficient and reliable parts cleaning. The drum washing process provides consistent cleaning results while reducing manual handling and is suitable for integration into existing production lines. Choosing a used KSN cleaning system offers a significantly lower investment compared to a new system, combined with proven technology, fast delivery and the possibility of customization to suit specific production requirements. Dedpfxszy Hkto Al Sswc KSN drum washers are designed for many years of operation in demanding industrial environments. Equipment and features: Grundfos pump Fully insulated construction Automatic level and pressure monitoring Adjustable drum speed Technical details can be found in the attached PDF document.

Condition: excellent (used), BIO-CIRCLE Type: RWR 80L Auto KST Dwodozgclmepfx Al Soc Description: RWR 80 L KST Fully automatic PLC parts cleaning system The RWR systems from Bio-Circle are the optimal solution for cleaning internal circuit systems without dismantling. The unit is space-saving, quiet and very easy to operate. Due to the completely closed system, there is no odor nuisance from the cleaner or the dirty water. External dimensions: approx. 1200 x 800 x 1050 mm Power supply: 400 V 50 Hz, 16A CEE 5p 6h plug Drain: 1 1/4" outlet Technical specifications: Type of contamination: Limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, low quantities Component geometry: Whole components (without dismantling) Quality seals: Stainless steel, service package available Maximum filling capacity: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heater: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of the cleaning system without tank filling: 180 kg Application area: The RWR 80 L KST fully automatic PLC has been developed for the field of plastic injection molding and can be used wherever cooling channels (circuit systems, lines) need to be cleaned. Application: Fill the RWR 80 L KST fully automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the system is switched on, the system begins to heat up. During the heating-up period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the change of flow direction run automatically, after the instructions displayed on the screen have been confirmed. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We would be happy to answer any further questions you may have on the phone.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️Top Service⚡️Fast Delivery⚡️Great Support! ✈️ Plus shipping costs – shipping on request.✈️ Fast Delivery: Only 4-6 weeks after payment receipt! Important Note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure that your investment has the best chance of success. Contact us today to learn more about our lease-purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ ►Optimal adhesion begins with perfect preparation – Chemical pretreatment systems from PROTON◄ Before the paint can fully develop its effect, the surface must be flawless. PROTON surface pretreatment systems ensure that every contaminant – whether oil, dirt, or oxide – is reliably removed. Only in this way is lasting corrosion resistance and excellent paint adhesion possible. Each product requires an individually tailored process. Whether alkaline or acidic degreasing, iron or zinc phosphating, nanotechnology or chromium-free processes – we develop customized solutions for your requirements. Our pretreatment systems – whether spray or immersion systems – offer you: ✳️Maximum energy efficiency ✳️Minimized chemical and water consumption ✳️Precise process control with automatic dosing and pH monitoring ✳️Durable construction made of corrosion-resistant stainless steel or plastic Our promise: Customized technology for the highest standards Our experienced project team analyzes your production conditions in detail and recommends the optimally matched pretreatment system. We take into account all critical parameters – from heating capacity to water circulation to steam separation and chemical separation. The spray washing lines are seamlessly integrated into your conveyor technology. All cleaning, rinsing and drying processes run fully automatically and efficiently – ready for perfect coating. Available systems: ✳️Spray and immersion pretreatment lines ✳️Nanotechnology systems (e.g. Bonderite, Oxsilan) Dwodpfxokwct Uo Al Ssc ✳️Degreasing and pickling systems ✳️Iron and zinc phosphating lines ✳️Chromating and chromium-free systems PROTON – Technology that convinces. Experience that delivers results. ⭐Follow us for new campaigns⭐ ☀️2 YEARS WARRANTY☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Dwsdpfxezxgglj Al Sjc Compressed air: 4 to 5 bars Version: standard version is right-hand Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Year of construction: 2016, condition: good (used), functionality: fully functional, machine/vehicle number: 45129, FISA Ultrasonic Mold Cleaning System 3 VST 1200/P-INSON+Z1, Year of Construction 2016 Manufacturer: FISA Ultraschall GmbH / FISA Manufacturing Srl Type: Special 3 VST 1200/P-INSON+Z1 Year of Construction: 2016 Serial Number: 45129 Internal dimensions of the tanks: approx. 1,600 × 600 × 1,250 mm Maximum mold weight: 2,200 kg Description Offered is an industrial FISA ultrasonic cleaning system for cleaning and maintaining large injection molds, die-casting molds, and other molds, as well as heavy components. The system consists of three stations arranged one behind the other for ultrasonic cleaning, cold rinsing, drying, and preservation. The design is intended for workpieces or molds with a weight of up to 2,200 kg. The VST 1200 cleaning station is designed as a noise-insulated INSON version. It features a pneumatically operated hinged cover, automatic water supply, safety float switch, vapor extraction with fans, and an adjustable timer. The ultrasonic generation is provided by two FISA USM 28/R generators and four MAGNASONIC transducers FB 550 PLAN. A cold rinsing station VST 1200 and a drying and preservation station VST 1200/P with Option D are connected to the cleaning station. The preservation station also has a pneumatically operated hinged cover, a vapor extraction system, and a sight glass for liquid level control. Above the preservation tank, there is a drip and blow-off station with side doors, a splash guard, an extraction system, and a flexible hose for blowing out the cleaned molds. Scope of supply Dedpfxozx Efto Al Sjwc - Cleaning station VST 1200 - Cold rinsing station VST 1200 - Drying and preservation station VST 1200/P - Two ultrasonic generators USM 28/R - Four MAGNASONIC transducers FB 550 PLAN - Pneumatically operated hinged covers - Vapor extraction system including fans - Drip and blow-off station - Stainless steel drip tray under the entire system - Two special mold support bars for a total load of 2.2 tons - Immersion rack VST 350 INOX with two inserts - Optical alarm indicator - Remaining runtime display - Weekly timer - Walkway with stairs and safety railing - Control cabinet and operating unit - Existing technical documentation Technical data - Usable internal dimensions: approx. 1,600 × 600 × 1,250 mm - Maximum workpiece load: 2,200 kg - Number of process stations: three - Sound power level according to the measurement report: 78 dB(A) - Design: Stainless steel - CE declaration of conformity available - Initial acceptance and instruction in 2016 documented - Drip tray: approx. 6,500 × 1,800 mm - Installation area including walkway and operating area according to drawing Condition Used industrial system. The system is shown fully assembled and connected in the pictures. A successful handover and instruction were documented in 2016. The current operating condition, the tightness of the tanks, the performance of the ultrasonic generators, and the function of the heating, pumps, pneumatics, extraction system, and control system should be checked again before sale or during an inspection. Inspection and functional testing possible by arrangement. Sale in the existing condition and scope of supply according to the illustrations and documentation. Dismantling, loading, and transport must be coordinated in advance due to the size and weight.

Year of construction: 2022, operating hours: 50 h, condition: new, functionality: fully functional, heating capacity: 12 kW (16.32 HP), product height (max.): 100 mm, product length (max.): 100 mm, product width (max.): 100 mm, machine/vehicle number: 43865, The KSN Drum Washer 350 WRD is an industrial cleaning system designed for efficient and reliable parts cleaning in automated production environments. The system combines washing, draining, rinsing and drying in one automated process, ensuring consistent cleaning results while reducing manual handling. The rotating drum provides continuous movement of the components throughout the cleaning process, making the cleaning system particularly suitable for industrial applications requiring efficient and repeatable processing of parts. Designed for continuous operation, the Drum Washer 350 WRD can be integrated into existing production lines and contributes to increased productivity and reduced operating costs. Standard equipment: Siemens PLC Grundfos pump Fully insulated construction Automatic level and pressure monitoring Technical specifications can be found in the attached PDF document. Dwedpfozy E Drox Al Soc

Year of construction: 2017, condition: excellent (used), Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specifically designed for the precise and reliable cutting of stainless steel pipes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser marking detection. Dsdjzw Ukcopfx Al Sjwc The control panel allows you to choose whether the cut is triggered mechanically (e.g., on the back of a union nut) or fully automatically via the optical detection of a laser marking applied to the pipe. Thanks to the integrated rotating 3-jaw cutting head and a micro-spraying unit (minimum quantity lubrication), the processing is extremely tool-friendly. The pipes remain almost completely dry and free of coarse contamination. The entire process, from loading to clamping, cutting, and unloading, is highly automated and carried out in a material-saving cycle. Fully integrated labeling & traceability system: The system is designed for modern quality standards (Industry 4.0 / Automotive). After the cutting process, the barcode label is automatically generated, assigned, and printed for complete part traceability (traceability & system logging directly integrated). Due to two separate box output stations (rear sluices with sliding doors), the system automatically switches to the second station when a box is full. The removal of the finished KLT boxes takes place in parallel with the main operating time without machine downtime. Advantages of the Vario cutting head series compared to conventional cutting methods Shortest changeover times in non-cutting separation Material-saving and free of contaminants Chip-free Easy to maintain No cooling and lubricating agents required Short processing times Cuts all common materials Can be combined with common pipe magazines or from a coil Special designs are possible Technical data & capacities Maximum pipe length (feed): 1,000 mm Material specification: Optimized for stainless steel pipes (also with pre-assembled union nuts or crimped ends) Sensors & positioning: Optical sensors for the automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feed (for manual or automatic loading) Length adjustment: Manually adjustable to different pipe lengths using a mechanical handwheel Cutting method: Chip-removing sawing / Rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant system: Integrated micro-spraying unit (MMS) for minimum quantity lubrication Control: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard and mouse Setup operation: Mobile Siemens Teach-In terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety polycarbonate windows Logistics / output Integrated box placement station 2 separate box output stations for rear removal via protected sluice systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario flex Special features: Pipes with union nuts Diameter Ø 6-76 mm Output length L = 150-1,000 mm Separation based on laser marking Wall thicknesses: 1 to 1.3 mm Condition: The system is in excellent optical and mechanical condition.

Condition: used, Year of construction: 2007, READY FOR IMMEDIATE USE! This degreasing system operates under vacuum using modified alcohol. It is used for degreasing metal components contaminated with oil and chips from mechanical machining. Applicable solvents: modified alcohols Hydrocarbons, Class AIII (flash point > 55° C) Ultrasonic power: 1000 W, 30 kHz Vacuum pump: Busch, 2 years old Good condition The complete control system was upgraded to S7 four years ago. Total maintenance costs exceed EUR 40,000. Spare parts: solvent pump, 2x heating registers, complete rotating basket assembly Various seals System process: spray, immersion, ultrasonic, and steam degreasing, including vacuum drying. Dwsdpfx Alohg Ugij Sec Data: Basket dimensions: 530 x 320 x 200 h mm Maximum load weight: 50 kg Average batches per hour: up to 5 Electrical connection: 29 kW Solvent volume: approx. 370 liters

Year of construction: 2008, condition: good (used), Semi-automatic three-chamber SMD stencil cleaning system Daunquart Washbear Dwjdpfx Aszuvw Sol Soc max. stencil size 740x740mm

Year of construction: 1997, condition: reconditioned (used), functionality: fully functional, Automatic stop system for precise profile cuts with a length of 4200 mm Motor-driven stop with electronic length measurement Dwedsz H I D Sepfx Al Ssc Robust steel construction with PVC-coated rollers Control via console with automatic repositioning The Microbo stop system enables precise and automated profile length measurement during sawing/punching/etc. The electrically operated slide moves on a ball bearing guide and is positioned via a numerically controlled system; the measurement is performed precisely from the center of the saw blade. PVC-coated rollers protect the profile surface and facilitate smooth sliding. All functions can be conveniently operated via the control console.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Industrial self-cleaning disc filtration system manufactured by CHEMIPOL. The unit was installed as part of a reverse osmosis water treatment plant and was used for water pre-filtration. The system is equipped with eight TW-type disc filter units operating in parallel. Automatic cleaning is controlled by a Siemens PLC with an HMI operator panel. TECHNICAL DATA Manufacturer: CHEMIPOL Model: TW8P2L3 Equipment type: Self-cleaning disc filtration system Number of filter units: 8 Filter type: TW disc filters Dwsdpfjzvlm Eex Al Soc Configuration: Parallel operation Cleaning system: Automatic self-cleaning Pressure monitoring: Two pressure sensors measuring inlet and outlet pressure Control system: Siemens PLC Operator interface: HMI touchscreen Application: Water treatment and reverse osmosis pre-filtration

Year of construction: 2026, operating hours: 20 h, condition: new, functionality: fully functional, operating temperature: 60 °C, air pressure: 2.5 bar, conveyor belt width: 400 mm, heating capacity: 18 kW (24.47 HP), product height (max.): 200 mm, product length (max.): 800 mm, product width (max.): 400 mm, machine/vehicle number: 45664, Beltline / Conveyour Cleaning System 400 WRD is developed as a compact and efficient solution for parts washing directly in the production line. The Beltline Series is specifically designed for industrial parts washing and degreasing of components with a certain level of complexity or weight, or in applications where gentle handling is required. The energy-efficient design reduces both operating costs and manual handling, making the solution ideal for both small batch production and continuous operation. Standard equipment: Dedpfx Ajzy Eqxel Sswc Siemens PLC Grundfos pump Fully insulated construction Automatic level and pressure monitoring You can find technical details in the PDF attached document.

Condition: new, functionality: fully functional, Year of construction: 2016, operating hours: 40 h, heating capacity: 12 kW (16.32 HP), product height (max.): 60 mm, product length (max.): 60 mm, product width (max.): 60 mm, machine/vehicle number: 40017, The KSN Drum Washer 350 UST Ultrasonic is an industrial cleaning system designed for efficient and thorough parts cleaning. Combining drum washing with ultrasonic cleaning technology, the system is particularly suitable for components with complex geometries, holes and cavities, as well as applications with high cleanliness requirements. Ultrasonic cleaning uses high-frequency sound waves in liquid to effectively remove contaminants while providing a gentle cleaning process without mechanical wear. Standard equipment: Siemens PLC Dwodpfx Alozy Euwj Sec Grundfos pump Fully insulated construction Automatic level and pressure monitoring You can find technical details in the PDF attached document.

Condition: used, Year of construction: 2005, This Meinert automatic destacking system, type AM 33 - 3000 /1300 Systems, will be auctioned online in our industrial auction / machinery auction for woodworking machines - edge banding machine - destacking system - vacuum press - veneer shear - membrane press. Dwedpoz Ndxajfx Al Sec You can find this and many other items on our platform.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20681, The Semmelroth S 50229/2 is a fully automatic, industrial continuous cleaning system in a timed linear design. It was specifically developed for the demanding cleaning of parts and surface preparation of aluminum and cast parts in industrial multi-shift operations. The system is completely made of stainless steel to ensure maximum corrosion resistance and durability when using aqueous cleaning media. System and Conveyor Technology - Transport system: Integrated, automated carrier circulation system. - Process coupling: Designed for timed linear systems for seamless integration into linked production and robotic cells. - Carriers: Customer-specific carrier design for precise and repeatable component placement during the process. Zone Layout and Process Steps The system goes through a five-stage process chain to meet the highest requirements for particulate and film-like surface cleanliness: - HD cleaning zone (high pressure): Mechanical pre-cleaning using high-pressure nozzles for targeted removal of chips, machining residues, and stubborn contaminants. - Cleaning zone (washing): Aqueous main cleaning (spraying/flooding) for chemical degreasing and removal of dirt from the surface. - Rinsing zone: Downstream rinsing stage for residue-free removal of cleaning agent components from the component surfaces. - Drying zone: Highly efficient blowing and drying unit for complete removal of residual moisture (prevents staining and corrosion). Dsdpfxszzpb Ro Al Sewc - Cooling zone: Targeted component cooling at the end of the process to thermally stabilize the parts for subsequent processes (e.g., metrology, testing, or packaging). Media preparation, filtration, and peripherals To ensure long bath life and consistent cleaning quality, the system is equipped with extensive peripheral technology: - Filtration: Three separate filtration stages (each designed for up to 10 bar) for the cleaning, rinsing, and high-pressure zones. - Filter monitoring: Dual differential pressure measurement for automatic detection of the filter saturation level. Oil separation: 1x highly efficient oil separator (Type ÖT 60) for continuous removal of foreign oils from the washing bath. - Exhaust air management: 1x air-cooled condenser (Type RL 150) for condensation and extraction of process fumes (reduces humidity at the installation site). - Fluid management: Integrated wastewater piping for cleaning and rinsing tanks, including a robust 1" wastewater pump for emptying. Safety and System Monitoring - Process control: Two integrated viewing windows with splash-proof interior lighting for optical monitoring of the cleaning process during operation. - Environmental protection / emergency protection: Robust drip tray under the entire system, equipped with a leak detection probe for automatic shutdown in the event of media loss. Technical Performance Data - Manufacturer: Semmelroth Anlagentechnik - Model: S 50229/2 - Total connected load: approx. 110 kW - Material: Stainless steel (V2A / V4A)