Used Cloos Robot for sale (55)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 306 431, type of input current: three-phase, total height: 2,165 mm, total width: 1,800 mm, total length: 3,000 mm, overall weight: 1,250 kg, input voltage: 400 V, type of cooling: air, Equipment: cabin, Machine year 2021, bought used December 2022, checked / repaired / adjusted by specialist company in April 2023. Only run for a few hours in trial operation since then. Itjdpfx Adsulw E Sjdsb

Condition: not inspected (used), Manufacturer: Cloos Tip: Romat 56 Itsdovxqy Tspfx Addjb The device has not been tested and its condition is unknown. Sold with the accessories shown.

Condition: not inspected (used), Manufacturer: Cloos Type: Romat 76 S The device has not been tested and its condition is unknown. Itedpovxqzqsfx Addob Sold with the accessories shown.

Condition: used, Year of construction: 2007, table diameter 4520 mm table load 35000 kg swivelling range 110 Grad total power requirement 44 kW weight of the machine ca. / t required space / m Type: ROMAT 350 / LVEB-120000N-4m / VVEs-D-18000N-5m-S / QVEB-2m travelling beam / CR-200000N / Hydraulic scissor lift table In the scope of delivery: Item Designation 1 Welding power source GLC 603 Quinto SD 2 Wire drum 3 Service door 2.1 4 Robot control cabinet 5 Service door 1.2 6 Scissor lift table (shown in parking position) 7 Cross-travelling unit QVEB 8 ROMAT 350 robot 9 Service door 1.1 10 Safety fence 11 Platform 12 Positioner 13 Sliding door 1 14 Linear traversing unit LVEB Itjdpfjrmulvsx Addjb 15 Vertical traversing unit VVEs 16 Sliding door 2 The disc ring on the table is a device that is not included in the scope of delivery ----- Technical data - Mechanical dimensions (without control unit and superstructures): approx.6440(57 7 0)x4520(2700)x5460(3320) LxWxH - Turntable diameter: 4520mm - Weight: approx. 25,000kg (without superstructure) - Speed range: 0.004 - 1.07 rpm - Welding current coupling: 600 A - Maximum table load capacity: 35 tons (according to load chart) Ambient temperature Storage / transport 0 to 60'C Operation +4 to 35 "C Interfaces Central transfer point for control, power supply, earth connection ----- 2.3 Linear traversing unit, LVEB Type LVEB-120000N 4m Dimensions W x D x H 7,700 x 2,440 x 776 mm Weight 4,355 kg Travelling distance 4,000 mm Load of the carriage 120,000 N Drive unit Gear motor Precision bevel gear motor Manufacturer Stöber Type K402VF0250EK703V Power 4.21 kW Voltage UKE 140 V / 1000 rpm Current Rated current IN: 8.32 A Type of current Standstill current I0: 9.04 A Motor speed 3,000 rpm Gear ratio i = 25.28 ----- 2.4 Vertical traversing unit, VVEs Type VVEs-5m Dimensions W x D x H 2,000 x 1,960 x 7,150 mm Weight 9,500 kg Travelling distance 5,000 mm Max. moving mass 18,000 N Drive unit Gear motor Bevel gear motor with brake Manufacturer Stöber Type K713VF0790MQ30ED704B Power 4.8 kW Motor speed 2,000 rpm Gear ratio i = 78.83 (20181/256) ----- 2.5 Cross-travelling unit, QVEB Type QVEB-2m Dimensions W x D x H 1,270 x 4,100 x 756 mm Weight 1,950 kg Travelling distance 2,000 mm Load on the travelling beam 10,000 N Max. moving mass 18,000 N Drive unit Gear motor Precision flat geared motor Manufacturer Stöber Type FS202VQ0145ED402U Power 1.43 kW Voltage UKE 140 V / 1000 rpm Rated current IN 2.86 A Type of current Standstill current I0: 3.1 A Motor speed 3,000 rpm Gear ratio i = 14.65 (3180/217) ----- 2.6 Rotary indexing table Type CR-200kN Manufacturer Cloos Dimensions W x D x H 1,820 x 2,120 x 541 mm Weight 2,850 kg Drive unit Gear motor Bevel gear motor Manufacturer Stöber Type K814VG1540EK803U Power 6.7 kW Motor speed 3,000 rpm Gear ratio i = 154.322 ----- 2.7 Robot ROMAT 350 Type ROMAT 350 Dimensions (W x D x H) in reference position 1,900 x 600 x 1,500 mm Weight 205 kg Footprint 500 x 515 mm N...

Condition: used, Year of construction: 2019, functionality: fully functional, System consisting of: 1 Qirox QRC 350-E welding robot including QC2 adv. control unit, 1 Qirox QRC 410-E welding robot including QC2 adv. control unit, handheld programming unit with 25 m cable, 24 V buffering, 2 GB flash drive Software expansion for each robot: Gas nozzle sensor, arc seam detection, multi-layer technology, point editor, transformation, 15" TFT with touchscreen on the cabinet, master-slave for robots 1 and 2, RSM software for remote maintenance 2 ICSE LD offline lasers Robot 1 single-wire tandem welding equipment with automatic torch change system: Itedpswgd Hzsfx Addeb 2 Qineo Puls 600 (600A) with master control module, 3 wire feeders, 3 torch hose packages, single MRW 510 evo welding torch, Duo drive CDD 2, single torch test gauge, and CDD, single-wire mechanical cleaning with external cleaning, pressure booster, 1 tandem burner ZMW 850 evo, Duo drive tandem CDD-T, burner test gauge single and with CDD, tandem mechanical cleaning with external cleaning Ground track 50 kN, travel distance 26 m, 1 C stand with height slide, travel distance 1.5 m for robot 1, 1 fixed C stand for robot 2 2 WPST-30 kN rotating devices, electric. Shaft, synchronous drive, designed as a gyro wheel for the support of hall beams (min. size 70x180 and max. 400x900 mm, support weight 4000 kg, on a motorized sliding track, max. clamping length approx. 19 m, 1 L-shaped manipulator WPS-TS 20 kN, turning radius 2750 mm Connection control, 2 light barriers for floor track protection, 2 start pre-selectors, partition walls and sliding gates including limit switch protection, 2 bumpers for floor track protection of both carriages, signal light for system status. Both robots can weld on the hall beams, and robot 2 can also weld on the L-shaped manipulator. 1 Tecau filter unit with 6000 m³ extraction capacity, 2 mobile extraction hoods with curtains, extraction slotted duct Delivery date: available immediately. Appointments by arrangement. Inspections under power are possible.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Cloos welding robot ROMAT 320 with ROTROL II control system incl. Gas nozzle sensor, arc seam tracking, hard disk, point editor, 16 I/O, programming pendant with 8 m cable base stand for robot mounting with robot accessories Welding machine Quinto II 403, wire feeder, mechanical cleaning, pressure amplifier, DUO drive wire feed 1 welding torch MRW 380, 1 torch hose package initial equipment for steel 1.2 mm, torch test gauge torch holder with safety shut-off diagonal axis 1 safety for 2-station operation, robot standstill monitoring connection cable for robot control as well as manipulator control, length 5 m 2 start preselection panels incl. cable, Itsdpfx Asxghrrjddeb 2 light barriers intermediate control integrated for the 2 L manipulators WPEK 5000, load capacity 500 kg, swivel radius approx. 800 mm Special price for disassembly by week 46

Condition: used, Year of construction: 2000, current intensivity bis 300 A burner heads . Isdpjyacp Hjfx Addotb dimensions of the machine ca. . m

Condition: used, Year of construction: 2000, current intensivity bis 350 A burner heads . Itedeyacpyepfx Addjb dimensions of the machine ca. . m

Condition: used, Year of construction: 2013, Robotic system consisting of: 1 welding robot Qirox QRH 390 incl. control unit, programming hand device, 24 V buffering, PC-side computer interface, 2 GB flash drive Gas nozzle sensor, arc seam tracking, point editor, Qineo Puls 450 with Premium control module, wire feeder, torch hose package, welding torch, torch testing gauge, mechanical cleaning, pressure booster, Floor-mounted track 10 kN, travel length 8 m, robot installed in upright position on base pedestal. Wire drum travels with the system. 4 positioners with counter bearing WP-TC 10 kN, load capacity 1,000 kg, clamping length 3.0 m, rotation radius 1 m Connection control, 4 light barriers, 4 prestart selectors, Delivery: immediately available. Special price for purchase by 15.12.2025! System will be cleaned, tested, and serviced prior to dismantling. Warranty: functional guarantee Iodpfsx Atp Ijx Addotb Very low operating hours

Condition: good (used), Year of construction: 2019, operating hours: 11,000 h, functionality: fully functional, Cloos laser welding system in 2-station operation with automatic shuttle system for loading and unloading. Kemper extraction system. Safety technology. Lifting weight of the turning devices per station 2000 kg. Technical data see description, chapter 2 System is available from October 2024 and has been regularly maintained. Location Germany. Ijdpfx Adjugv H Njdstb Demonstration and inspection possible. Services on request.

Condition: ready for operation (used), Year of construction: 2016, number of axes: 6, This 6-axis CLOOS QRC 350 QIROX welding robot was manufactured in 2016. It features a maximum load capacity of 15 kg, a workstation reach of 3400 mm, and advanced V6 control. Equipped with a 450A Qineo Pulse A welding machine, it ensures precise and efficient welding. The robot includes a touch sensor and an arc sensor for enhanced accuracy during operations. Consider the opportunity to buy this CLOOS QRC 350 QIROX welding robot. Contact us for more information about this machine. Additional equipment • Premium control panel with wall bracket and cable holder • External gas cleaning device • Adjustable electro-pneumatic valve • Wire feed equipment Machine Benefits Technical Machine Benefits • Built-in welding interface and software • Protective tube for wire transfer • High usability with movable counter-side support Itodpfxoyaliis Addsb • Workstation: 3400 mm • Longitudinal track travel speed: 1. 8 m/sec • Longitudinal track travel length: 7000 mm • Qineo touch sensor: 60 v • Arc sensor for welding path adjustment Extra Information Includes standard height robot stool and computer connector for enhanced usability. Control Unit Control: V6 Advanced Digital inputs and outputs: 16 USB connectors: 2 Connectivity: Expandable up to 16 axes, CAN-Bus, serial interfaces

Condition: ready for operation (used), Year of construction: 2023, This CLOOS Instant pro IRPS was manufactured in 2023. It features a QIROX welding robot with a maximum payload of 10 kg and a working range of Ø 3900 mm. Equipped with advanced QC 2 control system, it includes a programming handheld device and supports new tandem leading/trailing processes. Ideal for high-quality welding applications, it also comes with a comprehensive set of welding and sensor technologies. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Working range: Ø 3900 mm • Programming handheld device with touchscreen • Qirox technology interface • Tool controller ctms • Tcp measuring device Extra Information Welding Technology Power source Arc sensor Water cooling module Control module Wire drive unit Robot welding torch Software Parameter grinding Distance-dependent transition between parameter lists Multi-layer technology Programmable pendulum figures Software language: German Itjdpoyaimljfx Addsb IRPS Scanner Control IPC Rittal control cabinet Touch screen Scanner interface Uninterruptible power supply Scan width: 1000 mm at 500 mm product height Scan speed: 300 to 1000 mm/sec Burner Cleaning Unit Torch cleaning device Compressed air amplifier Wire cutter Control Unit Digital inputs/outputs: 16 Serial interface Computer connection: QIROX controller CAN bus USB interfaces: 2 Flash memory: 8 GB Buffer module: 24V Point editor Expandable to up to 16 axes

Condition: good (used), Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device -Manufacturer: CLOOS wire feeder, water-cooled -Type: lCK98A -Dimensions: 660/390/H350 mm Iodowrrp Uspfx Addotb -Weight: 23 kg

Condition: good (used), Inert gas welding device, inert gas device, wire feed case -Wire feed case Iedpfsd Shm Dox Addetb -with: hose package -Dimensions: 650/350 300 mm -Weight: 36 kg

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, 1 cloos welding robot ROMAT 320 inc. control ROTROL II, teach pendant incl. cable gasnozzle sensing, seam tracking, point editor Pedastal for robot Cloos welding machine MC 3 353 (350 A pulsed arc machine), wire drive, torch, torch hose package, connection hose package, mech. torch cleaning, pressure ampl., 2 stations turning table incl. 2 turning devices without tailstock type HW 3 DP 1500, load capacity/station 150 kg, swing radius 400 mm, max. dimension of workpiece 800x650 mm, 1 light beam, 1 start stop box, 1 safety wall on turning table 1 safety switches for service door incl door Base frame between robot and workpiecemanipulator delivery time: 8 weeks. Subject to prior sale. Itodjizkbpepfx Addob

Condition: used, Year of construction: 2021, operating hours: 300 h, functionality: fully functional, 1 cloos welding robot QRC 350 incl. control QC2, teach pendant incl. cable Connection cable between control unit and robot Touch sensing, seam tracking, point editor, Itedpfxoxvbu Es Addjb C bow construction for robot in a fixed position Cloos welding machine Qineo Next 452 (450 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: appr. 3 month . Subject to prior sale.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, 2 Cloos welding robots Qirox QRC 320 incl. control V 6, cooling unit, socket for robot, 2 cloos welding machines cloos qineo champ 600, wire drive, welding torch, torch hose package, 2 station turning table incl. turning-tilting table consisting of 2 c bows with turning devices WP-DH-TSC-5 kN, load capacity/station 500 kg, distance of the surface plates 1500 mm, swing radius about 750 mm. Manax ( manually control of the turning device in the loading station) Iedetrdlpspfx Addotb safety wall on turning table, 2 swing doors 1 light beam, 1 start pre selection, touch sensing, parameter interpolation, point editor, Master slave control of robots, CTMS autom. TCP control, Machine will be completly overhauled before delivery.

Year of construction: 2011, condition: excellent (used), Cloos welding robot Qirox QRC 320 incl. control V 6, Ijdeizwv Njpfx Addstb pedestal for standing arrangement, Cloos welding machine Quinto II 603 ( 600 A), wire feed, welding torch, torch hose package, mech. cleaning, pressure booster 1 rotary tilt table WPK 5000, pick-up weight 500 kg, 1 start preselection, 1 control for customer-provided sliding door gas nozzle sensor, arc seam search, point editor Unit will be completely overhauled and serviced before delivery. Second station with another, same rotary tilt table possible.

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, 1 cloos welding robot QRC 300 ( year 2022 only 1258 hours) incl. control QC 2 ( year 2020, new PC 2022), teach pendant incl. cable Gasnozzle sensing, point editor Pedastal for robot Cloos welding machine Qineo Puls 350 (350 A pulsed arc machine), wire drive, torch, torch hose package, connection hose package, mech. torch cleaning Itjdeiyp Najpfx Addsb 2 stations turning table incl. 2 turning devices QR-WP-TC 1,5 kN load capacity/station 150 kg, swing radius 400 mm, 1 light beam, 1 start stop box, 1 safety wall on turning table 1 safety switches for service door incl door Base frame between robot and workpiecemanipulator delivery time: about 8 weeks. Subject to prior sale.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Cloos welding robot Qirox QRC 350 year 2016 incl. control unit QC 6 year 2013 C Stand for suspended arrangement of the robot, repainting Itjdpfx Adjgz S Twedjb Cloos Qineo Champ 600 welding machine, wire feeder, welding torch, torch hose package, mechanical cleaning, pressure booster 2 station indexing table with H frame and WPG 5000 turning devices, take-up weight per station 500 kg, face plate distance 2200 mm, turning radius approx. 500 mm. Table newly painted, all motors overhauled, Arc protection on the indexing table, 2 swing doors, 1 start preselection, 1 light barrier gas nozzle sensor, arc seam detection, point editor System is completely overhauled and serviced before delivery. Pre-acceptance possible in Burbach. If ordered at short notice, delivery still possible in 2024.

Condition: used, Year of construction: 2007, operating hours: 42,000 h, functionality: fully functional, 2 identical systems consisting of: 1 cloos welding robot romat 350 incl. control unit, teach pendant incl. cable Connection cable between control unit and robot Gasnozzle sensing, seam tracking, point editor, CTMS, Manax C bow construction for robot in a fixed position Cloos welding machine MC 3 353 ( 350 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning-tilting tables 5000 N Iedpfxjw R T Twe Addjtb load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: on request . Subject to prior sale. Both systems together will be offered for a special price !!

Condition: new, Year of construction: 2019, operating hours: 135 h, System consisting of: 1 Qirox QRC 410 welding robot including QC2 adv. controller, handheld programming unit, 24 V buffering, PC connection on the cabinet side, 2 GB flash drive Gas nozzle sensor, arc seam detection, multi-layer technology, spot editor, QTI, QWP Qineo Puls 600 with master control module, wire feeder, torch hose package, MRW 510 evo welding torch, torch test gauge, mechanical cleaning, pressure booster, 20 kN floor track, 12 m travel distance Connection control, 1 light barrier, 1 start pre-selector Delivery date: from stock. Subject to prior sale. Iodpfxowhxiaj Addjtb Robot is mounted on a C-stand in a suspended position. System can be converted to 2 workstations and supplemented with manipulators available in stock.

Condition: used, Year of construction: 2021, operating hours: 300 h, functionality: fully functional, 1 cloos welding robot QRC 350 incl. control QC2, teach pendant incl. cable Connection cable between control unit and robot Touch sensing, seam tracking, point editor, C bow construction for robot in a fixed position Cloos welding machine Qineo Next 452 (450 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: appr. 3 month . Subject to prior sale. Iedpfx Adoxvbw Hedstb

Condition: reconditioned (used), Year of construction: 2007, operating hours: 29,000 h, Cloos welding robot system consisting of: ROMAT 350 robot with ROTROL II V4 control unit (optionally upgradable to version 2025), gas nozzle sensor, arc seam tracking, point editor, Qineo Puls 600 welding machine (600 A), wire feeder, MRW 510 evo welding torch, torch hose package, mechanical cleaning system, pressure amplifier. 1 L manipulator WPEK 25000, load capacity 2500 kg, turning radius 1500 mm, loading height 945 mm. Isdpfx Aow Razzeddotb 1 C stand with vertical slide, travel distance 1500 mm, boom length 2750 mm. Light barrier, start preselection. The system is in excellent condition and was only used for simple TIG welding tasks. Overhauled and serviced prior to delivery.

Condition: like new (used), Year of construction: 2020, operating hours: 2,900 h, functionality: fully functional, cloos robot Qirox 350 incl. control QC 2 touch sensor, seam tracking, point editor rotary gallow welding machine cloos qineo puls 451, wirde drive, torch, torch hose package 2 light beams, 2 start pre selections manipulators on request Itjdjx Iu R Hopfx Addob