Used Cmm for sale (170)

Condition: like new (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, machine/vehicle number: H32023/1001, Production line for manufacturing empty capsules Consisting of: • Mixing tank for preparing HPMC solution • Dipping process system for capsule forming with drying tunnel • Cutting machine for capsule cap • Cutting machine for capsule body • Assembly machine • Sorting system with camera inspection and freely programmable individual reject • Compressed air system with refrigeration dryer and filtration system • Purified water system (under 10ppm) • Clean air system • Enclosed room with several compartments and airlock, 210 m² Turnkey solution including know-how transfer, installation, training, long-term consultancy, and technical service The system is commissioned and calibrated on-site. The plant is currently fully assembled and in production. Requirements: floor that is easy to clean, sufficient electrical power supply, adequate water supply, sufficient floor load capacity. Gedsyyq Tbepfx Aanebw

Condition: ready for operation (used), Year of construction: 2016, total height: 2,411 mm, total width: 888 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, overall weight: 390 kg, table load: 300 kg, product length (max.): 929 mm, number of axes: 3, This 3-axis NIKON BENCHMARK 654 MAN (ALTO 6.5.4 CMM) was manufactured in 2016. It features a documented stroke of 500 mm in the X-axis, 400 mm in the Y-axis, and 440 mm in the Z-axis. The machine has a maximum part load capacity of 300 kg and includes a Renishaw MH20i manual indexable probe head. If you are looking to get high-quality measurement capabilities, consider the NIKON BENCHMARK 654 MAN CMM we have for sale. Contact us for further details. • Voltage: 230 V • Frequency: 50 Hz • Power: 600 W • Max current: 10 A • CMM operating pressure: 0.42 MPa • Air flow: 90 Nl/min • Documented machine dimensions (ALTO 5.4.4): 929 mm (W) x 888 mm (L) x 2411 mm (H) • Installed probe head: Renishaw MH20i manual indexable probe head Gods Airyljpfx Aanobw • Condition: Mint condition; used a few times; stored in dry warehouse Additional equipment • Renishaw calibration sphere mounted to granite bed

Condition: used, FARO Mobile 3D coordinate measuring arm / Portable CMM FARO Titanium Arm 2.4 m measuring range · Single Point 0.051 mm · Volumetric ±0.072 mm For sale is a used mobile 3D coordinate measuring arm from the manufacturer FARO. The measuring system is suitable for industrial measuring and testing tasks, quality assurance, component measurement, manufacturing metrology, and for general geometric measuring tasks. Technical data: Manufacturer: FARO Gbsdpfx Aaoz Hm Ngenow Model: Titanium Arm Device type: Mobile 3D coordinate measuring arm / Portable CMM Date of manufacture: 06.12.2004 Revision: 21.0 Made in Switzerland Measuring range: 2.4 m Single Point: 0.051 mm Volumetric: ±0.072 mm Certification date according to nameplate: 07.06.2016 PLANOLITH granite measuring plate: Accuracy class: DIN 876/1 Permissible deviation: 0.022 mm Actual deviation: 0.00498 mm Test date: 03.11.2003 Weight of granite plate: approx. 460 kg Dimensions of measuring table: approx. 1200 × 800 × 940 mm (L × W × H) Total weight of measuring table: approx. 560 kg Equipment: FARO Titanium Arm PLANOLITH granite measuring plate with substructure FARO transport case Measuring probe and measuring accessories as shown in the pictures Accessories case Magnetic clamping plate Connection cable FARO manuals and documentation Software and data carriers as shown in the pictures Further accessories as shown in the pictures Areas of application: 3D coordinate measurement Quality assurance Component measurement Component inspection Manufacturing metrology Tool and fixture construction Scope of supply: 1 × FARO Titanium Arm 3D coordinate measuring arm 1 × PLANOLITH granite measuring table with substructure Transport case, measuring accessories, documentation and accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Nameplates present The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,600 mm, travel distance Y-axis: 2,400 mm, travel distance Z-axis: 1,000 mm, overall weight: 11,000 kg, number of axes: 3, This 3-axis ZEISS ACCURA 16/24/10 3D CMM was manufactured in 2022. It features a measuring range of 1,600 mm in the X-axis, 2,400 mm in the Y-axis, and 1,000 mm in the Z-axis, with a maximum workpiece weight capacity of 4,000 kg. Equipped with the ZEISS VAST Scanning Head, it offers high-speed data acquisition and sub-micron accuracy. If you are looking to get high-quality measurement capabilities, consider the ZEISS ACCURA 16/24/10 machine we have for sale. Contact us for further details. • Maximum workpiece weight: 4,000 kg • Equipped with: ZEISS VAST scanning head • Sensor capability: Active scanning for high-speed data acquisition; sub-micron accuracy for complex geometries, bores, and deep features • Service/Certification: Maintained and calibrated annually by original ZEISS service technicians; accuracy documented and certified to international standards Gbodpfx Aas Ad Nxronjw

Condition: used, Wenzel RS 1012 CNC 3D Coordinate Measuring Machine The Wenzel RS 1012 is a CNC 3D coordinate measuring machine (CMM) with a horizontal arm design, intended for the precise measurement of medium to large-sized workpieces such as components and assemblies. The machine concept is based on a stable cast iron or granite base plate serving as a measuring table, with a guide system attached to the side, which allows for open loading from three sides. Technical Key Components & Specifications Machine Type: Horizontal Arm 3D Coordinate Measuring Machine (CMM) Manufacturer: WENZEL Präzision GmbH Model / Year of Manufacture: RS 1012 / 2002 Serial Number: 023116 Measuring Volume (X/Y/Z): 2,000 mm × 1,000 mm × 1,200 mm Probing System: Renishaw PHC10-3 PLUS (interface/controller for motorized rotary/swivel head PH10) Design: Horizontal Arm Measuring Machine (Column Measuring Machine) with integrated base plate Measuring Accuracy (MPE): 15.0 μm + (L / 45.0 mm, total maximum length measuring error in the measuring range is approximately 50.0 micrometers) Sensor System (Standard Configuration): Delivery without PC Key Features of the RS Series High Flexibility: The machine generally does not require a special foundation and can be flexibly integrated into existing production and laboratory spaces. Unrestricted Accessibility: Due to the side-mounted guide of the horizontal arm, the measuring table is freely accessible, which facilitates the loading of heavy workpieces by crane or forklift. Multisensor Technology: In addition to tactile probing systems (such as the TP20), the series can often be equipped with optical line lasers or scanning sensors by the manufacturer. "One-stop shop: We would be happy to offer you suitable financing for your project." Gbodpfx Aaezz Hywonsw More items – new and used – can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Tesa Micro-Hite 3D Measuring Device, Coordinate Measuring Machine Travel range: X-axis: 460 mm Y-axis: 510 mm Z-axis: 420 mm Dimensions (machine) Footprint approx.: 1,060 × 870 mm Height: approx. 1,320 mm Load & Weight Max. part weight: 227 kg Net weight machine: approx. 210 kg Accuracy MPE_E (Length measuring deviation): 3+4L/1000 µm (L in mm) MPE_P (Repeatability): 3 µm Accessories: Probe Measuring prisms Tesa USB stick Technical description has been adopted. You are welcome to visit us for an inspection. We can gladly arrange affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. Gsdpfxs Ah Dwae Aanobw The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, warranty duration: 1 months, Equipment: documentation/manual, type plate available, ZEISS LineScan 2-50 optical laser line scanner, manufactured May 2019. Manufacturer: Carl Zeiss MT GmbH Order No.: 600780-9441-000 Gbodpfx Aajzvrmxsnow Serial No.: 21901006 CE compliant, Laser Notice No. 50 (2007) Complete with case as pictured

Condition: used, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Year of manufacture: 2020 Professional handheld measuring system for precise 3D measurements directly in the production environment. Item description: For sale is a used KEYENCE XM-2000 coordinate measuring system, including the XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workplace – without a measuring room, without complex setup, and without specialized CMM knowledge. The device is ideally suited for manufacturing companies, quality assurance, initial sample inspection reports (ISIR), in-process controls, and reverse engineering. Technical data – KEYENCE XM-C1000 / XM-H1000 (XM series) Measuring system (general) Feature: Measuring range (XYZ) approx. 600 × 300 × 200 mm (depending on the configuration) Measuring accuracy ±(8 + L/80) µm (L = measuring length in mm) Repeatability ±3 µm (typical) Gedpfozii Dnex Aanjbw Resolution 1 µm Measuring principle - Optical tracking with camera-based detection Calibration - User calibration possible with calibration sphere CAD comparison - Directly on the device (STEP, IGES, etc.) Export formats - PDF, Excel, CSV, DXF Tolerance evaluation - Automatic with color comparison XM-C1000 – Control and evaluation unit (controller) Component: Display - 15-inch touchscreen Connections - USB, LAN, HDMI, power connection Storage options - Internal + USB export Software functions - Measuring, CAD comparison, report generation Operation - Touchscreen + button operation Languages - Multilingual (including German) XM-H1000 – Handheld measuring probe Feature: Probe type - Handheld with push button Feedback - LED status indicator, vibration signal Probe tip - Replaceable, various tips available Tracking - Detected via the controller's camera system System properties Feature: Operating temperature: 10 – 35 °C Voltage supply: 100–240 V AC, 50/60 Hz System size (complete) - approx. 800 × 600 × 800 mm (depending on the configuration) Weight (total system) - approx. 25–40 kg (depending on the configuration) Mounting - On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld measuring probe XM-C1000 (controller) Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & delivery: Shipping by freight forwarder Self-collection possible by arrangement. International shipping possible upon request. If you have any questions, require further information, or would like to arrange a viewing appointment, please do not hesitate to contact us. (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: like new (used), Machine like in new condition. Only used for a few demos on products. Godps Ahxw Aofx Aanjbw Ask for additional information!

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: N0038312, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, Equipment: documentation/manual, type plate available, For sale: Manual Mitutoyo Crysta Plus M 544 CMM – complete, calibrated 2023 Manual Mitutoyo Crysta Plus M 544 three-dimensional measuring machine (CMM) for sale. Features: - Measuring volume: X=500 mm / Y=400 mm / Z=400 mm - Serial number: N0038312 — Ref. 196-472-NL - MCOSMOS V2.4R12 software (GEOPAK + PartManager) - Renishaw MH20i + TP20-SF probing system Included in the sale: - Dedicated PC (Windows XP Pro, HP monitor, keyboard/mouse) - Complete probe kit (cross with 4 probes Ø1mm, Ø2, Ø3, Ø4) - Calibration sphere Ø19.9956 mm with ISO 17025 certificate (2023) - Mitutoyo France calibration certificate No. 23042801 — compliant, May 2023 - Complete operating manuals (GEOPAK v2.0 and v2.4, Geopak-Win Editor, PartManager) Machine can be viewed and tested while powered on. Gbedpfx Aey U Urdsanow For sale due to internal reorganization. In perfect working order.

Condition: used, FARO Measuring arm / 3D coordinate measuring arm FARO Prime measuring arm Mobile 3D measuring system / Portable CMM for industrial metrology For sale is a used FARO Prime measuring arm including accessories, transport case, and HP laptop. The measuring arm is suitable for mobile 3D measurements, quality control, component testing, reverse engineering, toolmaking, fixture construction, and industrial metrology. Technical data Manufacturer: FARO Technologies Type: Prime Device type: Portable 3D coordinate measuring arm / Portable CMM Date of manufacture: 10.09.2013 Calibration date according to certification: 25.06.2015 Revision: 28.1 Made in Switzerland Measuring range: approx. 1.8 m (6 ft) Axes: 6 Single point accuracy: 0.019 mm Volumetric accuracy: ±0.027 mm Repeatability: up to 0.016 mm Bluetooth wireless technology Integrated battery operation Temperature compensation Portable measuring arm technology USB interface Compatible with multiple probe systems Weight of measuring arm: approx. 9.3 kg Total weight including case and accessories: approx. 35 - 50 kg Equipment Mobile FARO Prime measuring arm Reference sphere / Calibration sphere Measuring probes / Probe set Base plate / Mounting plate Transport case HP EliteBook laptop Software data carrier USB dongle Operating instructions / Manuals Accessories according to pictures Application areas 3D coordinate measuring technology Quality assurance Incoming goods inspection First article inspection Component control Reverse engineering Tool and mold making Fixture construction Mechanical engineering Automotive industry Aerospace technology Condition Used Optical condition according to pictures Scope of delivery as shown in the pictures A complete technical function test has not been carried out Scope of delivery 1x FARO Prime measuring arm 1x Transport case 1x HP EliteBook laptop 1x Reference sphere 1x Base plate Gbodpfxjzc Erpj Aanjw Measuring probes / Probe set Software data carrier USB dongle Documents and other accessories according to pictures The table shown in the photos, or other items not explicitly mentioned, are not part of the sale. Shipping or freight forwarding is possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: ready for operation (used), Year of construction: 2020, total height: 2,700 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, overall weight: 2,350 kg, product length (max.): 2,100 mm, number of axes: 3, This 3-axis EROWA CMM Qi was manufactured in 2020. It features a travel range of 600mm on the X-axis, 700mm on the Y-axis, and 500mm on the Z-axis. The machine can handle a maximum workpiece weight of 650kg and includes advanced components like the PH10MQ touch probe system and FCR25-L6 touch probe changer. Ideal for precise measurements in quality control processes. Contact us for more information about this machine. • Max. distance between table and probe holder (without probe): 668 mm • Max. distance between columns at table height: 650 mm • Usable granite slab area: 650 x 1700 mm • Max. loadable workpiece weight: 650 kg Additional equipment Gsdpex D Hvqefx Aanobw • PH10MQ touch probe system with SP25M-2 • FCR25-L6 touch probe changer • ARCO Presoft software

Condition: used, Year of construction: 2008, measuring range X-axis: 500 mm, measuring range Y-axis: 450 mm, measuring range Z-axis: 400 mm, Coordinate measuring machines Manufacturer: WENZEL Type: smart CMM Year of manufacture: 2008 Technical specifications: Measuring range X-axis: 500 mm Measuring range Y-axis: 450 mm Measuring range Z-axis: 400 mm Condition: used Gedpfxj Agw H Ns Aansbw Accessories, tools, and clamping devices shown are included in the scope of delivery only if this is explicitly stated in the additional information. Subject to changes and errors in the technical data and information; prior sale reserved!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 200711, compressed air connection: 6 bar, type of input current: AC, Equipment: documentation/manual, Bührs (W+D) BB700 16K inserting system with Müller Apparatebau cut-sheet front end, built 2008. Currently in daily production at our site in Barnstaple, North Devon, UK. Viewing under power available by appointment. MACHINE DETAILS - Model: Bührs BB 700 16K, serial no. 200711, built 2008 - Speed: up to 16,000 mailpieces per hour (single page) - Total mailpieces: 25,932,497 (September 2026). Individual feeder counts available on request. - Feeders: 8 insert stations (7 x RF2 rotary, plus RF2K friction feeder on station 8) and envelope feeder - Envelope sizes: C4, C5 and DL - Integrity: Lake Image Systems camera reading system (v02.06.27) with 4 cameras fitted for full matching: one on the Müller front end, two on insert stations and one on the envelope station. Capacity for up to 8 cameras. Lake camera PC runs Windows XP; standalone operation recommended. - Software: W+D BSC 3.0 (03_03_24_00), Inserter 03_02_63_00, Bührs IBC controller 2.4.2.0 - Delivery conveyor included - Power: 400/230 V three-phase + N + PE, 50 Hz, 11.4 kVA total load, 25 A max fuse (BB700 plate rated 5 kW) - Compressed air: 6 bar filtered, 945 Nl/min MÜLLER FRONT END (model / serial) - Cut sheet feeder: 6687c / 54787 - Transport unit: 6995c / 57255 Gbedpfx Asz Iy Tnoanew - Spacer: 6975c / 57230 - Accumulator C4: 6999c / 61322 - Accumulator C5: 6895c / 55307 - Folders: 6826c / 58116 and 6822c / 57630 - Exit transports: 6989c / 57997 and 6815c / 58037 CURRENT CONFIGURATION The line has been modified from the original OEM layout (original June 2011 W+D drawing included in the pictures for reference only): - One RF2 feeder station added (original: 6 x RF2 + 1 x RF2K) - Müller front end reconfigured with folders and a C5 accumulator added - Turnover belt section, MT100 mailtable, distance module and eject gate removed. Output leg now approx. 3.5 m (originally 7.5 m). - Power and air figures are taken from the original drawing, which included the removed modules, so actual demand is likely to be lower. Please confirm as-installed dimensions on site before planning installation or transport. SERVICE AND MAINTENANCE - Annual service by BW Converting, most recently August 2026, including a rebuild of the crossover section - Accumulator EPROM upgrade fitted January 2026 - Maintained in-house by our own engineering team, with daily safety checks and weekly, monthly and quarterly PMs against documented checklists - Full CMMS maintenance history available from August 2024 - All manuals available, in physical and digital copies REMOVAL Collection only. The buyer is responsible for decommissioning, removal and transport. We do not arrange decommissioning or delivery.

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, number of axes: 3, This 3-axis Leitz Reference HP 5.4.3 was manufactured in 2020. It features a measuring range of 500 × 400 × 300 mm and includes a granite table, Hexagon LSP-X3 probe system, and a Leitz controller. If you are looking to get high-quality coordinate measuring capabilities, consider the Leitz Reference HP 5.4.3 CMM machine we have for sale. Contact us for further details. • Viewing: Possible by appointment; machine can be seen running • Incoterm/Collection: EXW Technical specifications • Accuracy (MPE-E): 0.70 + L/400 µm • Probing error (MPE-P): 0.80 µm • Table: Granite table • Probe system: Hexagon LSP-X3 • Stylus clamping: HP-S-X3 • Stylus changer: Hexagon 5-port stylus change rack • Change ports: HR-X3-P • Controller: Leitz controller in free-standing cabinet • Operator control: Leitz twin-joystick panel with emergency stop Machine history / service • Aug 2020: Machine and accessories supplied new by Hexagon Metrology • Sep 2020: Software bundle supplied by Hexagon • Feb 2021: 6 additional M2 stepped styli purchased • Apr 2021: Installed and commissioned in Andover by a Hexagon engineer (Installation/service report ref. 15320) • Last calibration: 16 May 2023 by Hexagon Metrology • Standard: ISO 10360-2:2001 • Certificate: CAA/REF769/543/16052023 • Result: Calibration met customer specification • Certificate available on request • Calibration validity: until 24 May 2024 Additional equipment • QUINDOS version 2023 • I++ Simulator + QUINDOS bundle • Additional CMM model • Licence manager for add-on bundle • Software licence transfer: subject to confirmation by Hexagon Peripherals and fixturing • HP workstation PC with 2 monitors • Kinematic fixturing: • Swift-Fix universal kinematic base (1) • Swift-Fix kinematic plates 300 × 300 × 16 mm (2) • Ceramic reference sphere Ø30 mm (1) Styli, holders, adapters, and change hardware • HR-X3-P changer ports (5) • Stylus kit • Special stylus holders (3) • 8 × M5 + 8 × Ø2 mm stylus holder (1) • M5/M2 stylus adapter (1) • M2 5-way stylus holder (1) • M2 stepped styli: 4 + 6 • M2 stylus R1 (1) • Special Ø0.3 mm ruby styli (8) • Special Ø1 mm ruby/carbide stylus (1) • Ø1.5 mm Si3N4 stylus (1) • Ø3 × 35 mm ruby stylus (1) • Ø3 × 50 mm ruby stylus (1) • Ø5 × 60 mm ruby stylus (1) • Titanium extension (1) • Rotary joint (1) Gbodpoz H Tmrefx Aansw • Adjustable cubes (2) • M5 cube (1)

Condition: used, Year of construction: 2003, Coordinate Measuring Machine Wenzel LH 54 (Year of Manufacture 2003) in well-maintained and fully functional condition. The machine is built on a stable granite structure combined with air-bearing guides. This allows the portal and axes to move almost frictionlessly and smoothly over the granite—a proven foundation for high measurement accuracy and repeatability. The LH 54 is designed for reliable use in quality assurance as well as in series production and delivers consistent measurement results even during continuous operation. Before delivery, the machine is inspected and test-run by our service technicians in Remscheid, ensuring full functionality. The system is currently powered on and can be viewed and demonstrated at any time. PC System (modernized): After purchase, a completely new PC system will be installed, meeting WENZEL’s current requirements. This system is fully up to date and thoroughly tested before the machine is finally handed over to the buyer. Optional Services (upon agreement): - Installation and commissioning of the measuring machine within NRW - Issuance of a factory calibration certificate - Determination of length measurement uncertainty Gbsdpfx Ajy Dcivsansw - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Maximum measuring volume diagonal: 4,660 mm - Determination of probing uncertainty according to DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training for the WM | Quartis measuring software - Custom programming for your components Additional Information: On request, the machine can be retrofitted with the proven Renishaw SP25M probe. The retrofit includes additional service work and complementary hardware components, which will adjust the purchase price accordingly. Additional software modules, custom adaptations, as well as individual accessories and clamping systems are available on request—optimally tailored to your specific measurement requirements. Measuring range X: 500 mm Measuring range Y: 1.000 mm Measuring range Z: 400 mm Measurement uncertainty: Eo = 2,5 + L/300 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2040 Basic PC System: Windows 11 (current configuration) Probing system: TP20 Probe head: PH10T Probe module: 1 × TP20 Standard Force Module head interface: PHC10-3 PLUS Probe interface: PI200 (Combi) Joystick: HT400 Exchange bridge: MCR20 (empty) Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck Included transport frame: On loan

Condition: used, Year of construction: 2020, operating hours: 11,000 h, functionality: fully functional, machine/vehicle number: 192821242, spindle bore: 63 mm, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, total length: 4,950 mm, total width: 5,500 mm, total height: 3,779 mm, workpiece weight (max.): 1,300 kg, type of input current: three-phase, spindle motor power: 35 W, overall weight: 18,000 kg, travel distance X-axis: 670 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 600 mm, workpiece weight between centers: 1,300 g, spindle diameter: 70 mm, workpiece diameter between centers: 1,040 mm, distance between centers: 800 mm, workpiece length between centers: 820 mm, FOR SALE: 5-AXIS CNC AND 3D CMM MEASURING DEVICE 1. MACHINE: AXILE G8 (5-AXIS) Gsdpfj Ahxq Ijx Aanjbw • Model: January 2020 (Serial No: 192821242) • Condition: Operational in our Istanbul Tuzla factory. • Operating Hours: Only 11,000 hours. • Control Unit: Heidenhain TNC 640 (5-Axis Simultaneous) • Spindle: 20,000 RPM (Built-in Kessler) • Capacity: 670 x 820 x 600 mm / Table: Ø800 mm (1300 kg load) • Extras (Included in the Price): 37 HSK tool holders, Schunk vise, and aluminum riser (for clamping parts up to Ø1040 mm). • Price: 315,000 Euro NOTE: Our machine has been meticulously used in defense industry and precision mold-making projects. It can be inspected on-site. Delivery is EXW (Ex Works). Please call for details.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 25 kg, warranty duration: 12 months, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Multi-sensor coordinate measuring center in top condition with warranty and guarantee extensive services Hexagon Optiv 442 multisensor meter equipped with camera, laser and Renishaw probe system. · Measuring range single sensor: 410x410x200mm · Dimensions: 1232x910x1663mm · Weight: about 940kg · Max. Load weight: glass plate 30kg · Accuracies: U1 = 1.9 + L / 200; U2 = 2.4 + L / 150; U3 = 2.9 + L / 100 (L = measuring length in mm) · Max. Traversing speed per axis: 200mm / s · Incl. Camera with 2-step zoom · Incl. Laser Gsdedyc Uaspfx Aansbw · Incl. LED ring light · Incl. Renishaw 6-fold button changer · Incl. Renishaw TP200 touch probe · Incl. New frame grabber (Eagle) · Incl. 2-monitor operation · Incl. Windows 7 Ultimate evaluation station · On request including transport, commissioning and calibration

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 201305503797, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 1,150 kg, total height: 2,800 mm, total width: 1,750 mm, total length: 2,300 mm, overall weight: 2,500 kg, Equipment: documentation/manual, - Special equipment: with ZEISS VAST XXT measuring head - Weight: CMM: 2,310 kg - Max. workpiece weight: 1,150 kg - Travel speed: Creep speed: SLOW FUNCTION: 0–5 mm/sec - Set-up mode: MAN mode 0–70 mm/sec - For further technical data, see the photographed documentation Gbjdpfx Aao Ahg Nbonsw - With accessories and documentationIncluding computer, monitor and keyboard Collection: the pick up has to take place on a date to be confirmed between 13.01. and 14.01.2027. FCA-D 71364 Winnenden - loading on truck

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 200101521101, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, year of last overhaul: 2026, Equipment: type plate available, For sale is a ZEISS CONTURA 7/10/6 coordinate measuring machine (CMM) with a ZEISS VAST XT gold scanning probe system and a C99 control panel. The machine is located in Velbert (North Rhine-Westphalia) and was last calibrated in February 2026. Manufacturer: Zeiss Model: SYS CONTURA 7/10/6 Part number: 623564.9010.000 Serial number: 200101521101 Year of manufacture: 01/2001 Automatic probe changer, 5 positions Measuring software: ZEISS CALYPSO 2021 Version 7.2.08 Gbodez Duv Ajpfx Aanjw Last major maintenance including calibration: 02/2026 by Zeiss Condition: used / operational Machine type: Coordinate measuring machine AVAILABLE FROM WEEK 08/2027 The dismantling and transport are to be organized by the buyer. PLEASE NOTE THE TWO ATTACHED DOCUMENTS IN PDF FORMAT. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 1,000 kg, total height: 2,730 mm, total width: 1,470 mm, total length: 2,000 mm, overall weight: 2,100 kg, table width: 880 mm, table length: 1,720 mm, table load: 1,000 kg, year of last overhaul: 2025, Equipment: documentation/manual, type plate available, Manufacturer: Mitutoyo, Model: Crysta-Apex V7106 CNC CMM, First commissioning: 2022, Regularly serviced by Mitutoyo according to maintenance schedule, last service in 2025. Measuring range (x/y/z): 700 / 1,000 / 600 mm, Measuring table made of granite; Dimensions of measuring table: 880 x 1,720 mm Maximum workpiece height: 800 mm Maximum workpiece weight: 1,000 kg Automatic, swiveling measuring head PH10MQME Plus (CM) SCR 200; Gsdpfo Ah Rtfjx Aanjbw Equipment/Accessories: Measuring head TP 200 PI-200-3 interface for TP 200 measuring probe Joystick box M2 Calibration sphere, ceramic PH10MQP R2 system Software: Mitutoyo MCOSMOS-1 CNC V4 Interface: Mitutoyo Q-DAS OUTPUT for transferring measurement data to the Q-DAS quality management and statistics system, Dell PC tower and LCD monitor, Weight of main unit: approx. 2,100 kg.

Condition: used, Year of construction: 2014, Measuring machine Zeiss CMM Pro T2 advance 16/21, year of manufacture 2014 – in very good condition • Standard numerical control panel • Base plate dimensions: Gbsdpow D R Nqefx Aansw Length: 4,000 mm Width: 2,000 mm Height: 640 mm Total system height approx. 4,500 mm • Measuring range: X-axis: 3,200 mm Y-axis: 1,600 mm Z-axis: 2,100 mm • Permissible workpiece weight: approx. 5,000 kg Software: Zeiss Caligo BASIS CNC, Zeiss Caligo QS-STAT • Length measurement deviation according to ISO 10360-2: MPE-E = (27 + L/80)μm

Condition: used, Year of construction: 2005, Purchase your coordinate measuring machine from the largest specialist in CMMs, with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been inspected, tested, and guaranteed to be ready for operation from A to Z – quality you can rely on. General machine data: Machine type: CRYSTA-Apex C544 Manufacturer: Mitutoyo Measuring range: 500 x 400 x 400 mm Control system: Mitutoyo UC-200 Software: MCOSMOS-1 V4 Equipment & accessories: Measuring head: Renishaw PH6M with adapter PAA1 Probing system: Renishaw TP200 Quick-change rack SCR200: optional, at an extra cost Included in the scope of delivery: Coordinate measuring machine CRYSTA-Apex C544 Measuring head Renishaw PH6M with adapter PAA1 Gbjdpfx As Ahqvqsansw Probing head Renishaw TP200 Not included: Quick-change rack SCR200 (optional, at an extra cost) Condition: Used, inspected, and functional machine from KMT stock, located in Leonberg. Processing: Inspection by appointment. We handle disassembly and loading; transport upon request. About KMT: Kneissl-Messtechnik is a specialist in coordinate measuring machines with 30 years of experience – offering DAkkS calibration services and optional installation and training.

Condition: new, functionality: fully functional, Equipment: documentation/manual, type plate available, New, unused ZEISS scanning probe set, comprising: ZEISS VAST XXT TL3. ZEISS VAST RDS head. Compatible with ZEISS PRISMO, ACCURA, CONTURA, and current-generation CMM platforms. Condition details: New, never installed/used Complete accessory set as pictured Gbsdpfxezuur Ij Aanow

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, number of axes: 3, This ZEISS CONTURA 10/16/6 G2 HTG Gold XT was manufactured in 2018. It features impressive travel ranges of 1000 mm in X, 1600 mm in Y, and 600 mm in Z. The machine is equipped with a ZEISS VAST XT Gold Scanning Sensor, allowing for active scanning with long stylus systems. If you are looking to get high-quality measurement capabilities, consider the ZEISS CONTURA 10/16/6 G2 HTG Gold XT CMM machine we have for sale. Contact us for further details. - Tool / Stylus Rack Capacity: 7 slots (7-fach Tastermagazin / Werkzeugplätze) - Sensor System: ZEISS VAST XT Gold active scanning sensor (probe configurations with styli up to 500 mm) - Options / Packages: HTG (High Temperature Gradient) package for extended operating temperature range (18–26 °C) - Software: ZEISS CALYPSO Software - Voltage: 1/N/PE 100-240V~ - Frequency: 50...60 Hz - Power: 0.8 kVA / max. 800 VA - Machine Weight: approx. 2.8 t (~2,800 kg) - Included Components: Coordinate measuring machine, 7-slot stylus changer rack, ZEISS CALYPSO software, operator PC (Bedienrechner), machine documentation - Accessories: Measuring probes and existing adapters/holders available upon agreement Gbedpj Ahpngofx Aanow