Used Coordinate for sale (757)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 405 mm, Mitutoyo Crysta Apex C544 year of manufacture: 2006 x, y, z: 505 x 405 x 405 mm manual storage for measuring probes clamping plate Laedpsy R A Apefx Al Nec calibration sphere 5 x measuring probes Renishaw TP 200 PH 6M probe incl. computer, software, dongle, and documentation machine is powered up for inspection

Condition: repair required (used), Renishaw InVia Raman Microscope Spectrometer Complete with Laodpfxjym Dt Ho Al Nec MSC20 Encoded Stage Controller RL532C50 HPNIR Laser Source A-9803-0625 CCD 1. The device doesn't come with a software license or computer. We are selling the device as it is. 2. There is a HPNIR785 Renishaw Laser Source installed on the device. Unfortunately we are a surplus seller and do not possess the expertise to test and run this machine for diagnostics. Our intentions are to sell the device for parts and leave a buyer recondition to their required standards. Device is missing some parts to make fully operational. Device is missing Renishaw Ramen Filters as seen in images. Device also is missing original Renishaw Key to open access panel.

Condition: excellent (used), FARO Prime 3D coordinate measuring arm Manufacturer: FARO Technologies Type: Prime Device type: Portable 3D coordinate measuring arm / Portable CMM Date of manufacture: 09/10/2013 Calibration date according to certification: 06/25/2015 Made in Switzerland Mobile 3D measuring arm for industrial metrology, quality assurance, component inspection, reverse engineering, tool and mold making, jig and fixture construction, and production control. Technical data Measuring range: approx. 1.8 m / 6 ft Axes: 6 Single Point Accuracy: 0.019 mm Volumetric accuracy: ±0.027 mm Ljdpfx Aszc Erpol Noac Repeatability: up to 0.016 mm Revision: 28.1 Bluetooth wireless technology USB interface Integrated battery operation Temperature compensation Portable CMM measuring arm technology Compatible with multiple probe systems Weight measuring arm: approx. 9.3 kg Total weight incl. case and accessories: approx. 35 - 50 kg Equipment / Scope of delivery FARO Prime measuring arm Transport case HP EliteBook laptop Reference sphere / Calibration sphere Base plate / Mounting plate Measuring probes / Probe set Software data carrier USB dongle Operating instructions / Manuals Other accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Shipping or freight shipping possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2012, Mitutoyo measuring bench in excellent condition, located in a climate-controlled room at 20°C. Calibrated by Mitutoyo on na regular basis. Availability: 10/2026 SP25M motorized measuring head with PH10MQ probe Tactile and scanning measurement Scanning precision within 2.3µ Measurement precision within 1.7µ +0.4µ per 100mm Max. workpiece weight 1,200kg Granite table dimensions LxW Maximum height under bridge 800mm Software Mcosmos 3 and MiCAT Lsdszd R D Eopfx Al Neac

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table length: 550 mm, table width: 320 mm, table load: 400 kg, spindle mount: MK 2, total height: 1,750 mm, drill spindle length: 130 mm, total length: 1,400 mm, total width: 1,400 mm, rotational speed (min.): 60 rpm, rotational speed (max.): 3,000 rpm, distance between stands: 600 mm, quill travel distance: 130 mm, quill stroke: 130 mm, space requirement width: 2,100 mm, spindle motor power: 550 W, workpiece weight (max.): 400 kg, overall weight: 1,600 kg, number of previous owners: 2, Equipment: rotational speed infinitely variable, HENRI HAUSER OP3 – Unique piece / excellent condition! (Bienne/Biel, Switzerland) This quality will never be produced again! Coordinate drilling machine/precision drilling machine with tool package in excellent, exceptional condition, second-hand (owned for 41 years). The coordinate drilling machine features the rare option of motorized table drive in the X and Y axes, along with potentiometers. This eliminates the tedious process of manually positioning each coordinate over longer distances using hand cranks. Furthermore, it has the rare thermal stabilization and expansion compensation system. This is achieved through 2 heaters that can and must be switched on separately before starting work and to maintain high accuracy and dimensional precision. This explains the factory-set high positioning accuracy of 0.002 mm with a resolution of 0.001 mm. What is truly unique is that the Hauser has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, including for the quill feed. This is a major advantage for precise drilling and surfacing in depth with Wohlhaupter, spindle tools, etc. With the aforementioned options and in this first-class condition, it is very rare and most likely no longer available. Those familiar with these machines, which are primarily used in the watch industry, gunsmithing/defense industry, precision engineering, material testing, and the optical industry, understand the value of these masterpieces of mechanical engineering. It is also ideally suited for engine construction/overhaul, technical universities and training, materials technology, special machine construction, etc. All documents, manuals, electrical wiring diagrams, etc. are, of course, available in their original form! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X-axis = 400 mm, transverse travel Y-axis = 250 mm, vertical travel Z-axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle mount MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds continuously variable from 60 rpm to 3000 rpm Feeds: Drilling spindle slide: 2 steps from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 Volt, spindle motor 0.80 hp Machine dimensions: Length = 1200 mm, Width = 1150 mm, Height = 1650 mm Laedpfx Aey Sx Nhsl Njc Machine weight approx. 1500 kg. Shipping (direct transport without transshipment) within the EU is possible. Price net export within the EU. Fair offers are welcome!

Condition: excellent (used), Year of construction: 2018, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 100 kg, The system was hardly used (the order was cancelled). Lasdpfxszb U Hae Al Noc CMM DuraMax 5/5/5 ZEISS CNC coordinate measuring machine (CMM) with cantilever design. Maximum permissible length measuring deviation (MPE) according to ISO 10360-2:2009: - MPE_E0 (3D) = (2.4 + L/300) µm for 18 - 22 °C - MPE_E0 (3D) = (2.7 + L/250) µm for 18 - 26 °C - MPE_E0 (3D) = (2.9 + L/200) µm for 18 - 30 °C Maximum permissible scanning probe deviation (MPE) according to ISO 10360-4:2000 within the maximum permissible scanning test duration (MPT). MPE_THP = 2.9 µm within MPT_tau = 55 s. Single probe deviation form according to ISO 10360-5:2010. MPE_PFTU = 2.4 µm. Form measuring deviation according to ISO 12181:2011 (VDI/VDE 2617 Part 2.2). MPE_RONt (MZCI) = 2.4 µm.

Condition: used, functionality: fully functional, Sales Description – Keyence XM-T1200 including accessories For sale is a high-quality Keyence XM-T1200 3D coordinate measuring machine including extensive accessories. The system is ideal for precise dimensional measurements, quality control, and flexible measuring tasks in manufacturing, toolmaking, and production. The XM series from Keyence impresses with its ease of use, high measuring accuracy, and fast measurement results – even with complex components. Thanks to the optical measurement support and intuitive software, measurements can be performed efficiently and reproducibly. Equipment / Scope of supply Keyence XM-T1200 Control and operating unit Original accessory package Probes / measuring sensors (depending on the configuration) Calibration accessories Software / documentation (if available) Further accessories by arrangement Technical highlights Precise 3D measurements Simple and user-friendly operation Flexible positioning of the measuring sensors Fast commissioning without complex fixtures Ideal for single parts, series production, and quality inspection Condition Lajdpfxszdnxyj Al Nsc The machine is in well-maintained and fully functional condition. Maintenance and operation were carried out carefully. An inspection or demonstration is possible by arrangement. Sale Location: Hanns-Martin Schleyer Str. 2 // 41199 MG Availability: by arrangement Price: Negotiable / on request If you are interested or have any questions, please do not hesitate to contact us. We will be happy to send you further photos, technical details, and information about the accessories.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, We are selling our Keyence XM because we are acquiring a larger machine. The device has been used regularly, but it is too small for our applications, so it is practically like new and in perfect condition. Lasdpfx Aszfik Hjl Nsc The device is fully equipped and comes with an extension and a tripod.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, 3D Coordinate Measuring Machine | Brand: MAUSER/ZEISS | Type: KMZ-G 602520 | Year of manufacture: 1988/2003 Optionally available with an air-conditioned hall. The machine has been calibrated regularly by ZEISS. The last calibration was performed on August 7, 2025, the next calibration (recommended) is scheduled for August 2026. TECHNICAL SPECIFICATIONS:: Measuring ranges (Length x Width x Height): 6.000 x 2.500 x 2.000 mm Travels: - X-axis: 6.000 mm - Y-axis: 2.500 mm - Z-axis: 2.000 mm - Length measurement uncertainty according to VDI/VDE 2617: U3 = (5,0 + L/250)µm, V2 = 3,5 µm - Length measurement uncertainty according to ISO 10360-2: MPE_E = (5,0 + L/250)µm - Environmental conditions for maintaining the specified accuracy: * Temperature range: 21°C +/- 3°K * Temperature fluctuation: 0,5°K/h, 1,0°K/d, 0,5°K/m - Environmental conditions for operation: * Temperature range: + 15°C up to 35°C * Humidity: 30 up to 70% General features, Equipment: - Portal measuring machine with ultra-precision guides and ball-screw drives - Second Y-axis with granite guideway and air bearing - High-resolution Zeiss scales - Positive-drive mechanisms in all three axes - Collision protection for the quill and probe head (for VAST-TK) for manual and setup modes - Safety position for crane interlock - Reference temperature compensation - Microcomputer control - Practice piece: cube, star-shaped stylus - Reference probe D = 8 mm, length: 115 mm - Reference standard D = 30 mm - includes basic software package - Load-bearing capacity: Limited only by the foundation design - Measuring system: VAST - Software: Zeiss CALYPSO - Documentation Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale - Laedpjy Iub Sjfx Al Nsc

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Lodpfxexyungo Al Njac Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 640 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, total height: 2,320 mm, total width: 920 mm, total length: 1,130 mm, compressed air connection: 4 bar, Equipment: documentation/manual, Aberlink Axiom too 600 CNC CMM Machine Type: CNC Co-Ordinate Measuring Machine Lajdpfx Ajyap R Rjl Njc Version: Axiom too 600 Year: 2007 Condition: Like New as had very little use Includes Upgrade to full CNC Auto Temperature Compensation SMC Refrigeration Air Dryer Aberlink Software PC & Monitor Description When the original Axiom CMM was released in 1997 it revolutionised CMM design utilising extremely innovative CMM technology. The Axiom was hugely successful but now Aberlink have taken all the best features from the original model and improved upon them. The Axiom too offers a larger measurement volume and higher accuracy than its predecessor, incorporating the very latest in materials technology. This Axiom too is the 600 size and is full the CNC version. Technical Specifications Measuring Volume: 640 x 600 x 500mm Accuracy: B89 0.008/300mm (VDI (U3) 0.0035 + L/250mm) Measuring System: Renishaw readheads and tape scale Resolution: 0.0005mm Probe System: Renishaw Max Velocity Vector: 500mm/sec Max Acceleration Vector: 1000mm/sec2 Bearings: Air Bearings on all axes Z Axis: Pneumatically counterbalanced Max Balance Weight: 1kg Air Consumption: 23 I/min (0.8 cfm) at 4 bar Required Air Pressure: 4 bar (60psi) Software: Full Graphical Interface designed for Windows Dimensions: 1130 x 920 x 2320mm Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2014, x-axis 1.200 mm y-axis 3.000 mm z-axis 1.000 mm solution 0.0001 mm max. workpiece height 1.200 mm max. workpiece weight 3.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Ledszbc Hhepfx Al Neac Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2000, table length 1160 mm table width 710 mm Lasdet Hw S Iepfx Al Noc daylight 650 mm Control WENZEL ME 5007 total power requirement kW weight of the machine ca. 800 kg dimensions of the machine ca. m 3-D-coordinate measuring machine with METROLOG II-Software

Condition: excellent (used), Manufacturer: DEA Type: DEA record 2305 Year of manufacture: Control / measuring software: TUTOR for Windows Table surface: 3,050 x 1,600 mm Column gap: 1,680 mm Distance plate – bridge: 1,200 mm Distance plate – probe: 850 mm Travel paths x – y: mm Condition: very good Weight: Dimensions: 4,300 x 2,350 x 3,000 + 1,000 mm Lodpfx Alowv Tvwe Noac

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 1 x Coordinate measuring machine with video-based system Ogp Smartscope MVP 300 Year of manufacture: 2012 In very good condition. Technical data: Travel ranges: X: 300 mm Y: 300 mm Z: 150 mm Scale resolution: 0.5µ Lasdozfyzcepfx Al Nec Dimensions (depth x width x height): 815 x 710 x 800 mm Weight: 140 kg Further technical data can be found in the photos. The measuring device can be inspected while powered on and in its operating environment.

Condition: excellent (used), Year of construction: 2019, 3D coordinate measuring machine Laedpfx Aljzb R I Hs Noc Control unit XM 1600 Measuring range on the table 200 x 200 x 200 mm Maximum measuring range 2000 x 1200 x 1000 mm Accuracy: +/- 7µm Repeatability: +/- 3µm

Condition: excellent (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Wenzel LH87 coordinate measuring machine, year of manufacture 2019. Currently available for inspection in the measuring room. Features a 6-position tool changer with scanning and rotary/swivel measuring head, and active damping in the machine bed. Complete with original Wenzel PC workstation and Quartig software with all options. New price: €110,000. Technical details can be found in the data sheet. Laedpfjzcu Tisx Al Nec

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 14065, measuring range X-axis: 640 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 300 kg, total height: 2,320 mm, type of input current: AC, total width: 940 mm, total length: 1,040 mm, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, input voltage: 230 V, travel speed (max.): 60 mm/min, Equipment: type plate available, This machine was refurbished and brought up to its current state in 2020 for €10,600.00. For example: Aberlink joystick with color display. Precise coordinate measuring machine, CNC-controlled, with MH20i/Renishaw probe & software. Fully functional, immediately available. Measuring range X = 640 mm Measuring range Y = 600 mm Measuring range Z = 500 mm Function: CNC Resolution 0.5 μm Max. workpiece weight 300 kg Max. travel speed 600 mm/sec² Air supply min. 5 bar Dimensions L = 1040 mm Dimensions W = 940 mm Dimensions H = 2320 mm Type X-axis Y-axis Z-axis Accuracy Max. workpiece weight Year of manufacture 2012 Calibration 2023 Ledpfx Aley Iptcj Neac The machine is ready for demonstration. The buyer must disassemble the machine and load it themselves.

Condition: used, Nikon Model: VMZ-R3020 XYZ travel distances: 300 x 200 x 200 mm *Type TZ with low magnification objective: 250 x 200 x 200 mm Display resolution 0.01 μm Maximum permissible deviation (MPE) EUX, MPE EUY, MPE 1.2 + 4L / 1000 µm EUXY, MPE 2.0 + 4L / 1000 µm EUZ, MPE 1.2 + 5L / 1000 µm Maximum sample weight 20 kg (Guaranteed accuracy: 5 kg) Camera Monochrome / Color 1/3 CMOS camera Working distance Type 1, 2, and 3: 50 mm Type 4: 30 mm Type TZ: (High magnification) 11 mm / (Low magnification) 32 mm Type A: 73.5 mm (63 mm with laser AF) Laedpfx Alsyiy Hbj Njc Laser AF repeatability range 1),3) 2σ ≦ 0.5 µm Illumination Type 1, 2, 3, and 4: Episcopic, transmitted and 8-segment ring illumination with 3 incidence angles *white LED / Type 4 has only 1 angle Type TZ: Left objective: Episcopic, darkfield; right objective lens: episcopic, transmitted light, darkfield Type A: Episcopic, transmitted and 8-segment ring illumination with 1 incidence angle *white LED Power supply, power consumption AC100V-240V, 50/60 Hz / 4A – 2A Dimensions & weight Main unit with table (W x D x H): 700 x 730 x 1793 mm / approx. 265 kg Controller: 190 x 450 x 450 mm / approx. 12 kg Installation footprint (W x D)4): 2700 x 2400 mm Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors. All information is non-binding!) We are happy to answer further questions for you by phone.

Condition: used, Year of construction: 2000, Zeiss Vista measuring machine, manufactured in 2000. Laedpfx Aljzd Dkxo Noc

Condition: new, Year of construction: 2025, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, Design Design: Bridge measuring machine Guidance system: High-precision air bearing guides Measuring range X-axis: 700 mm Y-axis: 1000 mm Z-axis: 700 mm Accuracy: 1.7 + l/300 Vectorial acceleration: 1732 mm/s² Vectorial velocity: 519 mm/s Probing system Laodpszf H Euefx Al Nec Measurement technology: Tactile Type: PH10M / TP20 Equipment Probe changing system: Included

Condition: used, Year of construction: 2016, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, Coordinate measuring device for simple inspection of components directly on the production floor. Measurement routines can be visually displayed step by step for untrained operators. The device was purchased in 2016 but was used only briefly as it proved unsuitable for the intended application. It is in nearly new condition and comes in its original packaging. Manufacturer: Keyence Model: XM-1000 Lsdpszbvqyofx Al Neac Year of Manufacture: 2016 Measuring range: 300 x 250 x 150 mm Repeatability: ±3 µm Measurement deviation: ±8 µm Equipment: - XM-1000 measuring system - XM-1500 measurement computer - XM-P1000 measuring probe - Several probe heads / balls - Documentation - Original packaging

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 780 mm, 1 used, very well-maintained High-precision CNC jig boring machine SIP MP 600 Machine year: 1995 – Retrofit in 2007 with HEIDENHAIN iTNC 530 and complete geometric overhaul. Table: 1100 x 700 mm – clear passage between columns: 750 mm Hydrostatic spindle diameter: 130 mm – 1/1,100 micron runout Retrofit to HEIDENHAIN CNC, 3-axis interpolation. Lajdpfxsu Titzs Al Nec Readout accuracy of the boring spindle under 1 micron – hydraulic weight and load compensation in the crossbeam. Fantastically preserved machine, which we are happy to demonstrate under power at our warehouse. Price (Domestic, plus 19% VAT) ex stock Delivery time: immediate – subject to prior sale and errors. Payment: as customary in trade, net in advance before collection. Technical data non-binding – subject to change and errors.

Condition: good (used), functionality: fully functional, For sale is a high-quality set of original probe heads and probe changing systems from the renowned manufacturer Renishaw. These components come from a modernization project and are ideal for expanding or as replacement parts for your coordinate measuring machine. Scope of delivery & details on the models: Laedpfx Aezcxx Nsl Noc - Renishaw TP200 (probe head): Compact, highly precise switching probe head with strain gauge technology. Perfect for form measurements and extremely repeatable. - Renishaw SCR200 (probe changing magazine): Automatic changing magazine for the TP200 probe head. Enables quick and protected changing of up to 6 probe modules. - Renishaw ACR3 (auto-joint changing system): Passive changing system for the automatic acceptance of probe heads and extensions. - Renishaw MSR1 (manual changing magazine): Practical, manual storage and changing magazine for up to 6 probe modules.

Condition: excellent (used), Year of construction: 2000, x-travel 3000 mm y-travel 1400 mm z-travel 1600 mm control DEA B3C-LC workpiece weight 4500 kg table surface area 4730 x 1465 mm tool taper RENISHAW PH10M weight of the machine ca. 4 t dimensions of the machine ca. 4 x 3,8 x 3 m Lodpjxb Eg Njfx Al Nsac