Used Cnc Gear Hobbing Machine for sale (68,727)

Condition: used, Year of construction: 1977, max. wheel diameter 400 mm gear width 280 mm max. module 1 Dcodpfx Ajt Hw Hxel Nsh min. module 4 total power requirement 15 kW weight of the machine ca. 6000 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering Dsdpfx Alet Hw D Rj Nsch including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, Year of construction: 1992, max. wheel diameter 150 mm gear width 300 mm max. module 4,5 min. module total power requirement 20 kW weight of the machine ca. 6 t Dcodpot Hwxbjfx Al Neh dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 1971, Max. diameter: 800mm Module: 10 Dcedoy Ru D Sspfx Al Njh

Condition: like new (used), functionality: fully functional, workpiece weight (max.): 3 kg, feed length X-axis: 100 mm, feed length Y-axis: 100 mm, feed length Z-axis: 200 mm, workpiece diameter (max.): 180 mm, milling length: 200 mm, overall weight: 5,000 kg, rotational speed (max.): 3,000 rpm, rotational speed (min.): 400 rpm, tool diameter: 80 mm, Equipment: documentation/manual, rotational speed infinitely variable, This machine is completely dismantled and rebuilt from the ground up. During the overhaul, it undergoes comprehensive modernization with state-of-the-art technology and the latest premium-quality components. Following refurbishment, the machine is presented in a technical and visual condition equivalent to new – reliable, high-performance, and future-proof. Djdpex Af A Hofx Al Nech The equipment and configuration can be tailored individually to your requirements, ensuring maximum productivity in your production environment.

Condition: refurbished (used), functionality: fully functional, Universal Profile Hobbing and Thread Milling Machine ZFWVG 250x5000 / S7 • Thread milling • Gear hobbing • Longitudinal milling Max. workpiece diameter over saddle: 250 mm Max. workpiece diameter over bed guideway: 500 mm Spindle bore: 102 mm Tailstock quill travel: 100 mm Main motor: 4.0 kW Cross-feed motor (X-axis): 4.3 kW Longitudinal feed motor (Z-axis): 3.8 kW Electrical configuration Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Programmable logic control (PLC) for fixed machine functions Total connected load: 9.5 kW Milling length: 5,000 mm Space requirements: Length: 7,000 mm Width: 2,500 mm Height: 1,600 mm Net weight: 6,700 kg Standard accessories: Dcsdpfxsw Hquxe Al Noh • Standard thread milling attachment ApG • Max. milling diameter: 150 mm • Spindle taper: Morse 3 • Max. module for hobbing: Module 3 • Min./max. number of teeth for hobbing: 4–50 Options: • Hobbing attachment ApFW Hobbing of parallel and helical profiles up to module 7 Max. milling diameter: 150 mm Spindle taper: Morse 4 • Heavy-duty thread milling attachment ApGS Hobbing of parallel and helical profiles up to module 5 Max. milling diameter: 150 mm Spindle taper: Morse 4

Condition: good (used), Year of construction: 2003, functionality: fully functional, workpiece weight (max.): 12,000 kg, feed length Y-axis: 300 mm, feed length Z-axis: 1,080 mm, table diameter: 1,200 mm, feed rate X-axis: 3 m/min, feed rate Y-axis: 500 m/min, feed rate Z-axis: 3 m/min, input current: 195 A, workpiece diameter (max.): 1,600 mm, milling spindle length: 450 mm, table bore: 400 mm, spindle speed (min.): 250 rpm, overall weight: 51,000 kg, power: 115 kW (156.36 HP), Equipment: documentation/manual, Liebherr high-performance gear hobbing machine LC1502 in good condition Controller Liebherr LH90 V4, Bosch Rexroth drives Extensive accessories such as BHG, cooling unit for lubrication and coolant, extractor, cutter arbors, various software packages/limit value extensions, and complete documentation. Dedpswqm A Tefx Al Njch We can also assist with setup and commissioning up to production, depending on effort!

Condition: used, Manufacturer: WMW Type: ZFW-Z 160x3 Gear hobbing machine Max workpiece diameter: ca. 160 mm Max modul: 3 Operated manual and semi-automatic Structure: Sturdy, precision-engineed machine designed for high accurance in gear production For limited period 10000 Euro for 1x WMW gear hobbing machine 2x WMW UPW25 thread rolling machines!!!!! Just for limited period 2x WMW UPW25 1x WMW gear hobbing machine Dsdpfx Alsyy N Hye Njch All for just 10.000 Euro !!!!!

Condition: excellent (used), Year of construction: 1980, Horizontal gear hobbing and threading machine for gears, splined shafts, worm screws, threads, and pinions up to 5 meters in length, complete with 3 milling heads models APFW, APGS, APG, set of gears, various steadies, and indexing device. Dsdpsyba Rwofx Al Nech

Condition: used, functionality: fully functional, table diameter: 430 mm, The price is for both machines – only sold as a set. Make: STAEHELY SH 500 Accessories: change gears, arbors, and one machine with tangential milling head (see photos)!!!!! Dsdpfxoxfub Do Al Njch Table diameter = 430 mm Max. gear diameter = 500 mm Gear width = 240 mm Module = 6

Condition: used, functionality: fully functional, wheel width: 800 mm, module 1-6 diameter max 600mm digital reading Dcedpfjxhck Sex Al Noh Complete machine with documentation, tool holders, change gears,...

Condition: ready for operation (used), Gear hobbing machine type FD320, FD500 and FD 800 Cugir Maximum module 6 to 10 mm Max. working diameter 320 to 800 mm Dedpocrd Nmofx Al Njch

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Year of manufacture: 1970 Dcjdpfxoxln Iws Al Noh Max. workpiece diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Max. helical angle: 45 degrees Hob diameter: 500 mm Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available.

Condition: ready for operation (used), Year of construction: 1966, operating hours: 10,000 h, functionality: fully functional, workpiece weight (max.): 3,000 kg, wheel width: 400 mm, feed length X-axis: 483 mm, feed length Y-axis: 381 mm, feed length Z-axis: 521 mm, rotary table diameter: 740 mm, table diameter: 740 mm, total length: 4,500 mm, wheel diameter: 1,000 mm, gear diameter: 1,000 mm, total height: 2,450 mm, total width: 2,450 mm, input frequency: 50 Hz, workpiece diameter (max.): 1,000 mm, type of input current: three-phase, spindle speed (max.): 200 rpm, table bore: 89 mm, spindle speed (min.): 50 rpm, grinding spindle motor power: 7,500 W, overall weight: 8,000 kg, rotational speed (max.): 200 rpm, rotational speed (min.): 50 rpm, table load: 3,000 kg, helix angle: 45 °, Equipment: documentation/manual, rotational speed infinitely variable, Machine Description — Churchill U 3615 Gear Hobbing Machine The Churchill U 3615 is a heavy-duty gear hobbing machine designed for accurate and reliable cutting of spur and helical gears in industrial production environments. Built with a rigid cast-iron structure, the machine ensures excellent stability, low vibration, and consistent machining quality during continuous operation. The machine is capable of cutting gears with a maximum diameter of 1,000 mm without tailstock and 863.6 mm with tailstock, and supports workpieces weighing up to 3,000 kg. A maximum gear face width of 400 mm and a maximum module of 10 allow machining of medium to large-sized gears. The rotary table has a diameter of 740 mm, is equipped with six T-slots, and features a table bore of 89 mm, providing secure and precise workpiece clamping. The machine supports helical gear cutting up to ±45°, expanding its application range. The hobbing spindle accepts tools up to 180 mm in diameter and 240 mm in length. Spindle speed is infinitely variable from 50 to 200 rpm, allowing optimal cutting conditions for different materials and gear geometries. Feed movements are controlled via P.I.V. variable drives, offering smooth and precise adjustment of vertical, horizontal, and tangential feeds, as well as intermittent and continuous hob shifting. The machine is powered by a 7.5 kW main motor and operates on three-phase power at 50 Hz. With overall dimensions of approximately 4,500 × 2,450 × 2,450 mm (L × W × H) and a total weight of around 8,000 kg, the Churchill U 3615 is a solid and dependable solution for heavy-duty gear manufacturing. Manufactured in 1966, this machine is fully functional, ready for operation, and supplied with a full set of change gears, technical passport, and operator’s manual, making it well suited for workshops seeking a proven and durable gear hobbing solution. Overall, the Churchill U/PH 3615 offers: -Heavy-duty, industrial-grade build quality -Large part capacity and flexible travel ranges -Adjustable spindle speeds and feed rates Dcjdpfjx Itfijx Al Nsh -Reliable operation for continuous gear production

Condition: new, Year of construction: 2025, operating hours: 60 h, functionality: fully functional, workpiece weight (max.): 40,000 kg, wheel width: 3,700 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 500 mm, rotary table diameter: 3,700 mm, position of the milling head: 0,025, table diameter: 2,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 6 m/min, total length: 12,000 mm, gear diameter: 400 mm, total height: 5,000 mm, total width: 4,000 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, TECHNICAL REQUIREMENTS GEAR HOBBING MACHINE GHM 2500 CNC Description of the main components of the GHM 2500 machine The GHM 2500 CNC gearing milling machine is a machine tool intended for processing by milling toothed wheels and toothed crowns. The machine is equipped with an external teeth milling head - which can process the teeth with an inclination angle from 0 to +/- 45 degrees - and an internal teeth milling head. The machine is composed of a milling unit, a unit for clamping and rotating the workpiece and the pinion axis centering tip. The milling/gearing unit is provided with three translation axes and two rotation axes, as follows: -X axis: longitudinal/radial movement towards the workpiece axis -Y axis: vertical movement of the gearing head -Aza Z: tangential movement of the gearing head -Axis: inclination +/-45 degrees of the gearing head -Axis C: rotation of the main axis of the gearing head The part fixing unit (the machine plate) has a rotation axis, axis B, for rotating the part. 1. External Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 2. Internal Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 3. The Quill - has the role of fixing the high parts, having a vertical displacement stroke. 4. The longitudinal advance mechanism of the upright, X axis – is made by a servo motor 30 Nm_ 3000 rpm, a Gressner worm reducer and a ball screw diam. 80 x 10, accuracy class IT 3. 5. The vertical advance mechanism of the toothing head, Y axis – consisting of a 30 Nm_ 3000 rpm servo motor, a Gressner worm reducer and a ball screw diam 80 x 10, precision class IT3. 6. Plate advance mechanism / plate rotation, C axis – is made with two 50 Nm_ 2000 rpm servo motor, a Gressner worm reducer and a duplex worm that meshes with the worm crown located on the plate. Dcodpfx Alsy A Nglj Nsh 7. The gearing head tilting mechanism, axis B – is made by a / 20 Nm_3000 rpm servo motor, a Gressner worm reducer and a worm gear-segment worm gear transmission. 8. The axial displacement mechanism of the gear head, Z axis – is made by a 20 Nm_3000 rpm servomotor, an Alpha Getriebe planetary reducer and a ball screw diam. 63 x 10, accuracy class IT3. 9. Top horizontal positioning mechanism, auxiliary axis X1 – a 20 Nm_ 2000 rpm servo motor, an Alpha Getriebe planetary reducer and a ball screw diam 63 x 10, precision class IT5.

Condition: used, Year of construction: 2001, functionality: fully functional, wheel diameter: 350 mm, gear diameter: 400 mm, wheel width: 50 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 600 rpm, workpiece weight (max.): 1,020 kg, total height: 3,048 mm, total length: 3,658 mm, total width: 2,590 mm, feed length X-axis: 440 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 10 m/min, rotational speed (min.): 600 rpm, pivoting range: 80 °, rotational speed (max.): 6,000 rpm, spindle bore: 80 mm, travel distance X-axis: 440 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, travel speed (max.): 10,000 mm/min, workpiece diameter (max.): 400 mm, We offer this used Gleason-Pfauter P400G (400mm/800mm) CNC gear grinder machine, year of construction 2001. Type: Gear Grinders Model: P400G Brand: GLEASON PFAUTER Stock Number: GH1076 Serial # 28-727 Condition: Used Dcodpfx Aeyuqrrjl Nsh Year: 2001 Description: Gleason Pfauter Model P400G 5-Axis CNC Gear Grinder Maximum Workpiece Diameter: 400 mm/800mm / 15.74”/31.48" Maximum Grindable Profile Depth: 35 mm / 1.37” Maximum Grinding Wheel Diameter: 350 mm / 13.77” Maximum Grinding Wheel Width: 50 mm / 1.96” Diameter of the Spindle Journal for Retaining: 80 mm / 3.14” X-Axis Travel (Radial): 440 mm / 17.32” Y-Axis Travel (Tangential): 200 mm / 7.87” Z-Axis Travel (Axial): 400 mm / 15.74” Maximum Grinding Head Pivoting Angle (+A-A): +/- 40° Maximum Table Load: 10 kN / 2,248 Lbs. Worktable Diameter: 380 mm / 14.96” Worktable Bore: 80 mm / 3.14” Tailstock Travel Distance: 650 mm / 25.59” Tailstock Locating Bore: 90 mm / 3.54” Feed and Rapid Traverse Rate (X-Axis): 10,000 mm/min / 393.70 IPM Feed and Rapid Traverse Rate (Y-Axis): 5,000 mm/min / 196.85 IPM Feed and Rapid Traverse Rate (Z-Axis): 10,000 mm/min / 393.70 IPM Tool Speed (Spindle-S): 600 to 6,000 RPM Worktable (C-Axis): 0 to 32 mm/min / 0 to 1.25 IPM Dresser Travel Distance (Z2-Axis): 200 mm / 7.87” Dresser Feed and Rapid Transverse (Z2-Axis): 5,000 mm/min / 196.85 IPM Dresser Spindle Speed (Spindle – S2): 3,000 to 6,000 RPM Maximum Dressing Wheel Diameter: 150 mm / 5.90” Approximate Machine Dimensions: 144” LR x 102” FB x 120” Height Approximate Filtration System Dimensions: 72” LR x 136” FB x 99” Height Approximate Control Cabinet Dimensions: 42” LR x 72” FB x 88” Height If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1973, table diameter: 1,350 mm, Liebherr L-1200 (Up to module 25) Dcedpfxjzalyzo Al Noh Table : 1350mm Machine Size : Approx. 4400(L)x1800(W)x2900(H) [mm] Weight : Approx. 35,000kg

Condition: used, TECHNICAL DETAILS - Maximum workpiece diameter : 80 [mm] - Z-axis travel : 220 [mm] - Max module : 2.5 - Max workpiece-holding spindle speed : 3000 [rpm] - Max dimensions of the hob (diameter x length) : 118 X 120 [mm] - Speed of the hob-holding spindle : 200-5000 [rpm] - Shifting travel : 140 [mm] - Angular travel of hob-holding headstock : -45/+115 [°] - Machine floor space : 2700/2180 [mm] - Machine height : 2310 [mm] - Machine weight : 4800 [kg] EQUIPMENT - CNC : Siemens 840D PowerLine - Loading manipulator Dcsdpfsyuzggox Al Neh

Condition: used, TECHNICAL DETAILS - Maximum workpiece diameter : 80 [mm] - Z-axis travel : 220 [mm] - Max module : 2.5 - Max workpiece-holding spindle speed : 3000 [rpm] - Max dimensions of the hob (diameter x length) : 118 X 120 [mm] - Speed of the hob-holding spindle : 200-5000 [rpm] - Shifting travel : 140 [mm] - Angular travel of hob-holding headstock : -45/+115 [°] - Machine floor space : 2700/2180 [mm] - Machine height : 2310 [mm] - Machine weight : 4800 [kg] Dodpfxoyuzgaj Al Noch EQUIPMENT - CNC : Siemens 840D PowerLine - Loading manipulator

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: LCS300-4T, CNC machine Elcede, type LCS300-4T, year of manufacture 12/2001, 400/50 Hz, working area 305 x 152.5 cm, machine dimensions 545 x 280 x 233 cm (height), control cabinet 80 x 64.5 x 190 cm (height), PC cabinet 84 x 75 x 198 cm (height), 3x Dietz fans, + cooling unit KKT-krans KLB-S26T-RS, year of manufacture 2001, 400V, 144 x 90.5 x 161 cm (height), 50,640 operating hours, desk with Fukitsu desktop, password Defi123+, desk 170 x 75 x 78 cm (height), in operation. Dcjdsy D Hwwepfx Al Neh

Condition: used, Year of construction: 2012, Model Year: 2012 Dedpex Tuddofx Al Nech Width: 1,050 mm Length: 515 mm Height: 600 mm Number of Axes: 3 Holder: BT40 Spindle Speed (RPM): 8,000 Processable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Djdpfx Aexdmgvjl Njch Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: excellent (used), XYZ SLX 555 x 3M CNC Lathe (2016) Stock Number 2851 Protrak SLX CNC Swing over bed 560mm Swing in gap 935mm Swing over cross slides 350mm Distance between centres 3000mm Spindle bore 104mm Additional Features Protrack SLX Control Drilling Attachment 4 Way Toolpost Dcedpfx Alsx Hp I Rs Neh 3 Jaw Chuck 3 Point Steady

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Djdpfx Aey Ni Ivsl Njch Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Djdpfxjyaywhs Al Nsch Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.