Used Cnc automatic lathe for sale (20,523)

TORNOS DECO-2000/13

Call

Condition: good (used), Year of construction: 2001, Catalog No. : 7175 Type: DECO-2000/13 Producer: Tornos Made in: 2001 Characteristic: Control system: FANUC PNC DECO Max. bar diameter: 13 mm Number of synchronous axles: 10 pcs Gmkf9g Maximum spindle speed: 10.000 1/min Length: 2000 mm Width: 1260 mm Height: 1950 mm Weight: 3000 kg Equipment: Robobar SSF 226 Bar Feeder (2000)

more

Listing

Brigachtal

1,157 km

Star Ecas 20

Call

Condition: excellent (used), Year of construction: 2005, Control Siemens, counter spindle, driven tools, Iemca loading magazine, high pressure system, Bdo98h0i8oo fire extinguishing system

more

Listing

Düsseldorf

827 km

CNC - automatic lathe

Traub TNS26

Call

Condition: good (used), Year of construction: 1992, Traub TNS26, BJ. 1992 Functional Incl. bar feeder 130+ collets (total for spindle & counter spindle) Approx. 25 tool holders, of which at least 4 are self-driven tools Device with case for tool measurement Also here new display + half control cabinet always renewed Iwztwuzbt

more

Listing

Leipheim

1,209 km

INDEX MS52G

€159,000

Call

Condition: good (used), Year of construction: 2004, machine/vehicle number: 2411202, CNC multi-spindle automatic lathe, make Index, type MS52G-1, year 2004, serial no. 160013, - 12 clamping devices, - 4 rigid tool holders simple, - 4 rigid tool holders multiple, - 6 powered tool holders, - Suction Büchel Plant equipped m. - 6 main spindles, - 6 counter spindles, - 2 steering positions, - travel X/Y 300 x 500 mm, - 50 axes, Bctezd3s - coolant device, - Band filter system, fire extinguishing system, make Kraft & Bauer, type FT704, serial no. 031519, extinguishing agent CO2, fire class B, integrated handling system, make Festo, operator panel, make Siemens, type Simatic OP 7, - extraction device, - positioning gripper, - settling device, - Accesories

more

Listing

Jakling

1,590 km

CNC sliding headstock automatic lathe with 7 axes

TRAUB TNK 65

Call

turning length: 295 mm, spindle bore: 65 mm, motor power: 35 W, spindle speed (max.): 6,000 rpm, Condition: excellent (used), Year of construction: 2017, Operating hours: 15,500 h, Sell used CNC short turning machine TRAUB TNK65 with a TX8i-s control system year 2017! Some data about the machine: Traub software package consisting of: -Polyform( C-axis programming) -Helical( 3D interpolation Y-axis) -Threading without compensating chuck) -Cut-off steel breakage monitoring Axis switch-off (GSP to block travel) -T-ATC ( Touch ATC) Top tool carrier: X,Y (interpolated) Z,H axis , 10. tool holders compact shank D45 with total drive 12000 rpm Bottom tool carrier: with integrated counter spindle Y,Y (interpolated), Z,H axis 9 tool holders compact shank D45 and common drive 12000 rpm Counter spindle: Throughput: 52mm (can be limited to 42mm by clamping device) 6000 rpm 22,5Nm Holder: 100mm cyl. with full clamping cylinder D52/15 for collet or chuck clamping, hydraulically operated, clamping pressure min/max: 8/70 bar Chuck D130mm Glass scale X-axis tool holder top and bottom Tool carrier for back machining: 8 tool holders (2xsynchronous, 6xasynchronous) total drive for up to 5 tools with 4000rpm, 16Nm at 25% ED, or 12000 rpm, 5.3Nm 25%ED prepared for internal cooling lubricant supply Accessories: Various driven tools and holders Bar loader LNS Quick Load Servo III Chip conveyor Huzng0o Paper belt filter system Complete documentation etc. Machine is available immediately! Machine is ready for immediate use! Machine is loaded by us! Machine can be inspected under power! Transport can be organized on request!

more

Auction

DMG MORI MSL 60-7

Condition: excellent (used), Year of construction: 2015, Operating hours: 25,801 h, Functionality: fully functional, TECHNICAL DETAILS axes: 7 Control: Fanuc 31 i Main spindle Bar diameter: 60 mm speed: max. 5000 min/-1 spindle drive: 7.5 / 5.5 kW Counter spindle turning diameter: max. 42 mm speed: max. 5000 min/-1 spindle drive: 3.7 / 2.2 kW Speed (Z4): max. 15 (30) m/min Acceleration: max. 5 m/s2 path X1 / X2 / X3: 60 mm path X4: 130 mm path Z2: 80 mm path Z3: 80 mm path Z4: 340 mm Nominal thrust X1 / X2 / X3 / X4 / Z2 /Z3 / Z4: 4400 N Tool holder slide 1: fixed tools 1 Tool holder slide 2: fixed tools 1 Tool holder slide 3: stationary tools 1 Tool holder slide 4: stationary tools 4 Tool holder for backworking: stationary tools 3 MACHINE DETAILS space requirement: approx. 9.0 x 2.3 x 2.0 m machine weight: approx. 3.5 t supply voltage: 230 V, 3 Ph, 50 Hz amperage: 35 A Rated power: 18 kVA EQUIPMENT - Bar feeder, useful length 5m - Chip conveyor A comprehensive accessories package is supplied. Cdgg8d0o The scope of delivery is not shown in the pictures but in the description text.

Listing

Zuchwil

1,186 km

TORNOS Deco 2000

Call

Condition: excellent (used), Year of construction: 2000, TORNOS DECO 2000 CNC automatic lathe TECHNICAL DATA Dimensions and weights Dimensions: length: 2000 mm width: 1260 mm Height: 1950 mm Weight: Empty: 2550 kg Specific floor load: Approximately: 8 daN/cm2 Axles 1 movable headstock: Z1, S1 2 independent linear Tooling system on the vertical: X1 / Y1 (S6) - X2 / Y2, S2 1 front attachment, 4 spindles: X3 / Z3 1 independent pick-up spindle: Y4 / Z4, S4 1 independent tooling system in backworking: X4 (S5) General data Bar capacity: For min. remnant: 13 mm For max. remnant: 16 mm Max. Workpiece length: With rotating guide bush: 180 mm Work in clamp: 30 mm Main spindle speed: 12000 rpm Spindle rotation direction: Preferably: To the right Motorization main spindle: Continuous operation: 2,2 kW Intermittent duty: 3,7 kW Motorization tapping spindle: Continuous operation: 1,5 kW / Intermittent operation: 2,2 kW Headstock clamp type: F20 Guide bushes: rotating, fixed Type of F'bushing tongs: Master: 605 Number of tools in main operation: Fixed: 2 x 5 / Rotating: 3 + 3 Number of front tools: Fixed: 4 / Rotating: 3 Cross section of tools: 12 x 12 Tool tongs: Rotating Standard: ESX 20 Number of tools in backworking: Fixed: 3 + 3 / Rotating possible: 3 + 3 Bar feeder: Yes Parts removal: Basic version 8dw7hyhokk Machine type: Moving headstock Machine axis height: 1100 mm Headstock travel: 255 mm Bar guide position: To the right of the user Bar passage: 1-16 mm Telescopic tube passage: Bore: 6-17 mm Speed: Left / right: -12000 to 12000 rpm Headstock feed speed: Max. 20 m/min We do not take any responsibility for the correctness, completeness and up-to-dateness of the information.

more

Listing

Brigachtal

1,157 km

Hanwha STL32H

Call

Condition: excellent (used), Year of construction: 2011, Control Siemens, Commissioning 2013, spindle passage 38mm, counter spindle, driven tools, Iemca loading magazine, D7rktao high pressure system,

more

Listing

Düsseldorf

827 km

Güdel G100 CNC

Call

Condition: good (used), Year of construction: 1984, Güdel G100 CNC with new Siemens control system working range - max. circulation Ø:260 [mm] - max. machining Ø:120 [mm] - traversing of the longitudinal slide:200 [mm] - traverse of the facing slide:120 [mm] Main spindle - spindle nose:A4 DIN 55021 - spindle bore for collets:type F38 - Power chuck Ø:165 [mm] - Bar passage Ø:32 [mm] - Speed range:50 - 60 000 [rpm] Main drive 0drj2s8t - DC motor:7 [kW] Feed drives (DC motors) - feed speed:0,01 - 6 000 [mm/min] - rapid traverse rate:6 [m/min] Tool carrier - 8-sided flat table turret Tool carrier plate interchangeable:210 [mm] - tool clamping surface:110 [mm] - Selectable for 2, 4 or 8 positions indexing:0.8 [sec.] - Repeat accuracy or linear system:0,001 [mm] Main dimensions - length:1 700 [mm] - Width:1 100 [mm] - Height:1 850 / 1 600 [mm] - Height spindle center above floor:1 120 [mm] - Weight:approx. 1 300 [kg]

more

Listing

Leipheim

1,209 km

Index MS52G

€159,000

Call

Condition: good (used), Year of construction: 2004, machine/vehicle number: 2411201, CNC multi-spindle automatic lathe, make Index, type MS52G-3, year 2004, serial no. 160001, connected load 190 kW, control, make Index, type C200-4D (Siemens 840 D basis), - 12 clamping devices, - 5 rigid tool holders simple, - 3 rigid tool holder multiple, - 4 powered tool holders, - Suction Büchel Plant equipped m. - 6 main spindles, Hbftvlqua - 6 counter spindles, - 2 steering positions, - travel X/Y 300 x 500 mm, - coolant device, - belt filter system, - Fire extinguishing system, make Kraft & Bauer, type FT704, serial no. LA02420, extinguishing agent CO2, fire class B, - integrated Handling system, make Festo, operator panel, make Siemens, type Simatic OP 7, - extraction device, - positioning gripper, - depositing device, accessories, automation/conveyor system, Make Promot, type EPL, year 2005, serial no. 2006-289.001-P

more

Auction

STAR Micronis SR 20 R II

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, Automatic lathe with C-axis and bar feeder LNS 3.16 HS-4.4 TECHNICAL DETAILS number of axes: 7 Control: FANUC 18i-TB turning length: max. 205 mm bar diameter spindle: 20 mm turning speed: 500 - 10000 rpm Indexing C-axis: 0.01 spindle power: 2,2 kW bar diameter counter spindle: 20 mm counter spindle rotation speed: 8000 rpm Indexing C-axis counter spindle: 1°. counter spindle power: 2.2 kW Number of positions of end pieces: 8 number of positions of guide holders: 16 number of motorized tool holders: 4 speed of the motorized tool holders: 18.000 rpm Number of positions for secondary machining: 5 MACHINE DETAILS lubricant tank: 155 l Supply voltage: 400 V machine dimensions: 2200 x 1200 mm weight: 2200 kg Fzd8vio EQUIPMENT synchronous spindle driven tools C-axis backworking parts conveyor belt Fire extinguishing system material feed LNS 3.16 HS-4.4

Listing

Berlin

(dealership location)

1,143 km

CNC Automatic Lathe

FAMAR SUB 160 2g

Call

Condition: ready for operation (used), Year of construction: 2013, X-travel: 180mm, z-travel: 430mm, max. chuck diameter: 160mm, weight: 10t. Pp0yj

more

Listing

Zuchwil

1,186 km

STAR ECAS 32T

Call

Condition: excellent (used), Year of construction: 2006, STAR ECAS 32 T CNC automatic lathe - Very good condition - Many accessories available - Detailed photo gallery included in PDF catalog 7qholnor27 TECHNICAL DATA Max. Machining Diameter: 32 mm Max. Headstock Stroke: 350 mm Tool Post: First Turret: 10 stations Second Turret: 10 stations Number of turning tools: Max. 2 tools / station Tool shank: 16 mm Sleeve Holder: Number of tools: Max. 3 tools / station Max. Drilling Capacity: 23 mm Max. Tapping Capacity: M12 X P1.75 Max. Die Cutting Capacity: M12 X P1.75 Power Driven Att. Number of Tools: Max. 2 tools / 1 station Max. Drilling Capacity: 10 mm Max. Tapping Capacity: M8 X P1.25 Max. Milling Capacity: 12 mm Max. Slotting Capacity: 2 mm X 10 mm Main Spindle min. indexing degree: 0.01° Main Spindle Speed: 7`000 rpm Power Driven Att. Spindle Speed: 5`700 rpm Coolant Tank Capacity: 230 l Dimensions: 3175 x 1745 x 1860 mm Center Height: 1084 mm Weight: 5`700 kg Power Consumption: 8.0 KVA No responsibility is taken for the accuracy, completeness and timeliness of the information.

more

Auction

Citizen L520-VII

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, CNC sliding headstock lathe with 7 axes. TECHNICAL DETAILS 7 axes: X1 / Z1 / Y1 / C1 / X2 / Z2 / C2 bar diameter: max. 20 mm turning length: max. 205 mm main spindle speed: max. 10.000 rpm counter spindle speed: max. 10.000 rpm C-axis: 0.001 degree Control: Cincom Mitsubishi Meldas Tool holder: 18 tools (linear tool holder, front attachment, backworking) Jzewn3 EQUIPMENT - Parts conveyor belt - fire extinguishing system - Chip conveyor - Loading magazine IEMCA BOSS 432r

Listing

Oberpframmern

1,328 km

Citizen Cincom Boley L 20 Typ L 5 20

Call

Condition: excellent (used), Year of construction: 1999, incl. loading magazine Iemca Mini Boss 325/32 5-axis CNC sliding headstock automatic lathe CNC control Mitsubishi M 6 turning diameter 20 mm turning length 200 mm spindle bore 24 mm driven tools driving power 3,7 kw incl. very extensive tooling. The machine has been released due to an age-related liquidation and is in an excellent mechanical and mechanical and well maintained condition. The machine was only operated in single-shift operation. All manuals and documentation available. The machine will be sold exclusively in a package with the two Citizen B 12-II/VI incl. stock magazines Genus 112/32 sold. Qb0q9

more

Listing

Leipheim

1,209 km

INDEX MS52G

€109,000

CNC DOUBLE SPINDLE AUTOMATIC LATHE

Call

Condition: good (used), Year of construction: 2004, machine/vehicle number: 2411203, CNC multi-spindle automatic lathe, make Index, type MS52G-2, year 2004, serial no. 160016, Connected load 190 kW, control, make Index, type C200-4D (Siemens 840 D basis) Plant equipped m. - 6 main spindles, Bc3c3mvq - 6 counter spindles, - 2 steering positions, - travel X/Y 300 x 500 mm, - 50 axes, - coolant device, - belt filter system, - Fire extinguishing system, make Kraft & Bauer, type FT704, serial no. 04804, extinguishing agent CO2, fire class B, - integrated Handling system, make Festo, operator panel, make Siemens, type Simatic OP 7, - extraction device, - positioning gripper, - settling device, - Accesories, - Automation/conveyor system, make Promot, type EPL, year 2005, serial no. 2006-289.001-P

more

Listing

Mappano

1,383 km

Gildemeister SPRINT 42 linear

Call

Condition: used, Year of construction: 2006, Dimensions (mm) 5026 x 2036 x 1922 h G8f3gjzq

more

Listing

Odry

1,386 km

MANURHIN TRAMINER 20 CNC automatic lathe

Manurhin TRA 20

€4,500

Call

Condition: excellent (used), Year of construction: 1995, Sliding headstock The machine is in very good condition Technical data in the last photo Hskidequ8

more

Listing

Zuchwil

1,186 km

CNC Turning automatic lathe

Citizen M20-C

Call

Condition: excellent (used), Year of construction: 1999, Citizen M20-C CNC Swiss type lathe Technical Data Max. Machining Diameter: 20 mm Max. Machining Length: 320 mm / chuck Max. Drilling Diameter: 10 mm Max. Tapping Diameter: M8 Through-hole Diameters: 24 mm, 21 mm Spindle Speed: 200 - 8100 rpm Spindle Speed Change Steps: Steepless, S4-Digit Rotary Tool Max. Drilling Diameter: Gang Tool: 5 mm Turret: 5 mm Rotary Tool Max. Chucking Diameter: Gang Tool: 10 mm Turret: 7 mm Rotary Tool Max. Tapping Diameter: Turret: M5 Tool Spindle Speed: Cqzw3dgqha Gang Tool: 250 to 5000 rpm Turret: 320 to 6380 rpm Tool Spindle Speed Change Steps: Steepless, S4-Digit Back Spindle Max. Chuck Diameter: 20 mm Max. Front Separate Length of a Back Machined Workipece: 125 mm Back Machining Max. Drilling Diameter: 8 mm Back Machining Max. Tapping Diameter: M8 Back Spindle Speed: 150 to 7200 rpm Back Spindle Speed Change Steps: Steepless, S4-Digit Number of Tools to be mounted Gang Tool: Cutting 5, Drilling: 3 (Total 8 tools) Turret: 10 Count of Turret Indexing: 10 Tool Holder: Gang Tool: Special M20 gang tool Turret: Ø 10- Ø 10 mm (Positioning Pin Type) Cutter Size: Gang Tool: 13 x 13 x 130 mm Turret: 10 x 10 x 60 mm Max. Diameter of Tool Mounted on Rotary Tool Holder: Gang Tool: Drill, End Mill: Ø 10 mm Turret; Drill, End Mill: Ø 7 mm Tap: M6 Slitting Cutter: 45 x 12.7 mm Rapid Feedrate X1 Axis: 15 m/min X2, Y1, Z1, Z2, Z3 Axes: 18 m/min A2 Axis: 200 rpm Least Input Increment: X1, X2, Y1 Axes: 0.001 mm Z1, Z2, Z3 Axes: 0.001 mm A2 Axis: 0.001 deg. Spindle Indexing: 0.001 ° Center Height: 1070 mm Motors: Spindle Motor: 2,2 / 3,7 kW Back Spindle: 0,75 / 1,5 kW Gang Tool: 0,4 kW Turret: 0,4 kW Y1, A2 Axes Feed Motor: 0.3 kW x 2 X2, Y1, Z1, Z2, Z3 Axes: 0.5 kW x 5 Hydraulic Motor: 0,4 kW Coolant Motor: 0,25 kW Lubricant Motor: 0,004 kW Input Power Capacity: 14 KVA Required Floor Space: 1100 x 2540 x 1700 mm Weight: 2500 kg We do not take any responsibility for the correctness, completeness and topicality of the information.

more

Listing

Goriška cesta 27a, 5270 Ajdovščina, Slovenia

1,609 km

JINN FA JSL-42AB

€43,000

Cnc multi spindle automatic lathe

Call

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: 0345, Machinge is perfectly working. It is very quick machine. Selling due to retirement in the future. The remaining machines, complete equipment will also be for sale in the future. Three cnc machines, two forklifts, etc... The following things were done/replaced on the machine: - Main spindle bearings were replaced - Push rod for sub spindle closing was replaced - New main flexible computer power cable - New fi35 ducts at the bar feeder and used fi22 ducts complete with push rods V03a02ua Not all items are in the pictures because there is a limit of 15 photos. Contact for photos.

more

Listing

Székesfehérvár

1,767 km

PFIFFER HW25/12

Call

Condition: excellent (used), Year of construction: 2012, Controller SIEMENS Max. bardiameter D25 mm The machine is set to D18 mm at this moment. Turret 12-fold. Barfeeder 3 m Chip conveyor Coolant unit Dql7m0pb Accessorie: hydroakku + pump

more

Listing

Leipheim

1,209 km

INDEX MS52C

€179,000

Call

Condition: good (used), Year of construction: 2004, machine/vehicle number: 2420701, CNC multi-spindle automatic lathe, make Index, type MS52C2-1, year 2004, serial no. 160024, - robot cell, - 7 clamping devices, - 3 rigid tool holders simple, - 3 rigid tool holder multiple, - 4 powered tool holders, - Suction Büchel Handlings and assembly robot cell Stäubli Unimation incl. basket translator with basket stack for raw and finished parts, two shuttles on top of each other for supply/removal baskets, Integrated measuring station Commissioning 2021 Connected load 24 kW, control, make Index, type C200-4D (Siemens 840 D basis), - 2 steering positions, - 6 spindles, - travel X/Y 300 x 500 mm, - bar diameter max. 52 mm, - - spindle speed max. 5000 rpm, -12 tool carriers, coolant system, - Industrial robot, make Stäubli, Cy3ppegtyc - programming panel, - extraction device, - settling device, - Accesories

more

Listing

Zuchwil

1,186 km

Citizen M32 V

Call

Condition: excellent (used), Year of construction: 2003, Citizen M32 V CNC automatic lathe Max. Machining diameter: 32 mm Max. Machining length: 320 mm per chuck Max. Diameter for frontal drilling: 12 mm Max. Diameter for frontal tapping: M10 Diameter of spindle passage: 36 mm Main spindle speed: 200 - 8000 rpm Change of main spindle speed: digits S + 4 without graduation Step feed of the main spindle: 1°. C-axis of the main spindle: 0,001°. Max. Clamping diameter of counter spindle: 32 mm Max. Length of the part to the front during backward machining: 145 mm Max. Protrusion of the parts from the counter spindle: 65 mm Max. Drilling diameter in backward machining: 10 mm Max. Max. threading diameter in backworking process: M8 Counter spindle speed: 200 - 7000 rpm Graduated speed change, counter spindle: digits S + 4 without graduation Graduated feed rate, counter spindle: 1°. C axis of the counter spindle: 0.001°. Tool spindle of tool holder 1 Max. Drilling diameter: 7 mm Max. Max. thread diameter: M8 Spindle speed, stepless: From 200 - 5000 rpm Tool spindle from tool holder 2 Max. Drilling diameter: 10 mm Max. Max. thread diameter: M8 Spindle speed, stepless: From 200 - 5000 rpm Tool spindle of the counter spindle tool holder Max. Drilling diameter: 7 mm Max. Max. thread diameter: M6 Spindle speed, stepless: From 200 - 5000 rpm Count of step feed for turret station: 20 Number of mountable tools: Up to 21 tools Rotary chisel in tool holder 1: 5 tools Driven tools in tool holder 1: 4 tools Tools in tool holder 2: 3 tools Tool holder for turret tool holder: Ø36-Ø12 (positioning pins) Tool dimension tool, tool holder 1: 16 x 16 x 130 mm Tool, tool holder 2: 16 x 16 x 90 mm Sleeve (tool holder 2): Ø 25.4 mm Sleeve (counter spindle tool holder): Ø 25.4 mm Max. Diameter of the tool clamped in the holder for driven tools (in tool holder 1): Ø 10 mm Max. Diameter of the tool clamped in the holder for driven tools (in tool holder 2): Ø 10 mm / Ø 60 x Ø 15.875 Ø 63 x Ø 16 Ø 60 x Ø 25.40 / Ø 63 x Ø 22 Ø 32 x Ø 10 / Ø 80 x Ø 15.875 Rapid traverse X1, Y1, Z1: 20 m/min X2, Z2: 20 m/min Y2: 8 m/min X3, Z3: 20 m/min Smallest increment X1, Y1, Z1: 0.001 mm X2, Y2, Z2: 0.001 mm X3, Z3: 0.001 mm Axis stroke X1: 108 mm Y1: 275 mm Z1: 325 mm X2: 120 mm Y2: 44 mm Z2: 202 mm X3: 238 mm Z3: 410 mm Bar length: 2500 mm Yruaofad Central height: 1132 mm Motors 2,2 / 3,7 kW 3,7 / 5,5 kW For control of guide bush: 0,75 / 1,5 kW For control of counter spindle: 0,75 / 1,5 kW For tool spindle of tool holder 1: 1 kW For tool spindle of tool holder 2: 0,75 / 1,5 kW For tool spindle of counter spindle tool holder: 0,75 kW X1: 0.4 kW Y1: 0,75 kW Z1: 0,75 kW X2: 1 kW Y2: 0.75 kW Z2: 0,75 kW X3: 0,75 kW Z3: 0,75 kW T1: 1 kW For main spindle chuck: 0,2 kW For counter spindle chuck: 0,2 kW For the extractor: 0,2 kW For unloading the products from the machine: 0,2 kW For the coolant: 0,4 kW For the lubricating oil: 0,004 kW Dimensions: 2770 x 1370 x 1820 mm Weight: 3100 kg For the correctness, completeness and topicality of the data we do not take over guarantee

more

Listing

Zuchwil

1,186 km

STAR Micronics SR-20J type N

Call

Condition: excellent (used), Year of construction: 2011, STAR SR-20J type N CNC automatic lathe - Very good condition - Documentation available Cg2gseiwdj Please refer to the attached catalog for technical data. (page 3 there)

more

Listing

Zuchwil

1,186 km

Seibu CNC Automatic Lathes

STAR Micronics SV-20

Call

Condition: good (used), STAR SV-20 CNC automatic lathe TECHNICAL DATA OF THE CONTROL AXES rapid feed X,Y: 15000 mm/min rapid feed A,B: 15000 mm/min rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C axis: 0.001°. MACHINING CAPACITY Max. turning diameter: 20 mm Max. headstock stroke: 205 mm Max. drilling capacity: stationary: 14 mm; driven: 8 mm Max. Tapping capacity: Stationary: M10 X P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: spindle drive main spindle motor: 3,7 / 5,5 kW main spindle bore: 26 mm PICK-UP SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Unclamping length: 75 mm spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2,2 / 3,7 kW Indexing angle: 1°, 15 CONFIGURATION Operation mode: right-handed Dimensions: 2670 x 1375 x 1650 mm Weight: 3400 kg We do not guarantee the accuracy, completeness and timeliness of the information. Cg2f03m9i2

more

Listing

Kabin Buri District, Prachin Buri, Thailand

9,681 km

Seibu SNC 20P

Call

Condition: used, Year of construction: 2001, Seibu SNC 20P (6 Units) CNC Automatic Lathes E3vzgnltl Fanuc Series 21i-T control, Transfer Robot -Single Tray No.

more

Listing

Kabin Buri District, Prachin Buri, Thailand

9,681 km

CNC Automatic Bar Feed Lathes

Tsugami BM16C

Call

Condition: used, Year of construction: 2002, Tsugami BM16C (4 Units) CNC Automatic Bar Feed Lathes Bafv0usr0e Nos 379, 380, 391, 392

more

Listing

Kabin Buri District, Prachin Buri, Thailand

9,681 km

CNC Automatic Lathes

Tsugami C004 III (X.Z)

Call

Condition: used, Tsugami C004 III (X.Z) (4 Units) CNC Automatic Lathes Dmdjbv Tsugami Fanuc LG2 Control, 200V, 50/60Hz, Weight 2,200kg, Twin head Robot- 2 tray stack. Nos 966, 969, 976, 974

more

Listing

Boswil

1,212 km

Cycle lathe

MAS Reiden Masturn 32 CNC MT 32 CNC

Call

Condition: good (used), Masturn 32 CNC JG2000. In good condition. Neat accessories according to pictures. Control : Heidenhain NC340 172 - Accessories available. - Parat holder system. Working area Rotation diameter over bed 320 mm Swing diameter over slide 150 mm Center distance 800 mm Work spindle Spindle holder according to DIN 55027 B6 Spindle bore 50 mm Spindle taper metric 60 Main drive Motor power at speed 1500 min-1 7 kW Spindle speed range 1st stage 0 - 1000 mm-1 Spindle speed range 2nd stage 20 - 4000 mm-1 Max. Spindle torque 1st stage 360 Nm 2nd stage 90 Nm Axis X Max. Travel 190 mm Rapid traverse 5000 mm.min-1 Max. Feed force 3000 N Z axis Max. Travel of the bed slide 750 mm Rapid traverse 8000 mm.min-1 Max. Feed force 5000 N Bicxqtpfqim Max. Steel diameter 25 x 25 mm Tailstock Quill diameter 65 mm Quill adjustment 120 mm Inner taper of the quill - Morse 4 Dimensions: Length 2180 mm Width 1341 mm Height 1775 mm Weight of the machine. 2150 kg Power requirement 21 kVA

more

Listing

Malsch

1,078 km

CNC Lathe

MAZAK - CNC Integrex 400Y

Call

Condition: used, Year of construction: 2000, turning diameter 400 mm turning length 1500 mm control Mazak Fusion 640 MT Mazak 8dxxhhx3lb motor 200 V turning diameter over bed slide 390 turning diameter over bed 610 mm tool taper KM 63 total power requirement 48 kW weight of the machine ca. 9650 Kg dimensions of the machine ca. 5,4x2x2,9 m

more

Listing

Seal Jet Economos CNC Drehmaschine Hydraulik Dichtungen economos Dichtungsdrehmaschine

Herten

(dealership location)

820 km

Seal Jet Cnc LATHE

Seal Jet Economos CNC Drehmaschine Hydraulik Dichtungen economos Dichtungsdrehmaschine

€15,000

Call

Condition: repair required (used), Sell here a good CNC seal lathe from Economos Austria for turning seals for hydraulics Bhjbkmnidm

more

Listing

Monforte del Cid

1,902 km

PL50x1500 cnc lathe

Vurcon CNC PL50x1500

€40,560

CNC Lathe with bar feeder

Call

Condition: new, Year of construction: 2023, The Vurcon parallel cnc lathe is the perfect machine for your workshop, it is composed of a 6 position turret with a distance of 1500 mm in the Z axis travel and comes standard with the SIEMENS 828D control. Standard configuration cnc parallel lathe Vurcon PL50x1500 Numerical control Siemens 828D (PPU240) Shopturn function 15 kW main motor 2.500 rpm main spindle Gqdn7qyjr 6-position turret 3-jaw manual chuck USB interface Lubrication unit Coolant cooling system Complete fairing Siemens electronic components CE marking

more

Listing

Draše

1,697 km

CNC-TAKANG TNC 24

€12,000

Call

Condition: good (used), Year of construction: 1994, Machine is in operable state. Due to its age, last 8+ years it has not been used because company moved its business to light metal casting and did not have job for it. Machine comes with: • 12 station Sauter tool turret, VDI 16mm which accepts up to 6 live tools • LNS hydrobar barfeeder Mdprgqof • Chip conveyor • user manuals Price is for machine loaded on truck.

more

Listing

בת חפר

3,930 km

FCA Fixed price VAT not applicable

BINNS&BERRY 800X3000 CNC Trident 800

€45,000

Call

turning diameter over cross slide: 800 mm, turning length: 3,000 mm, turning diameter: 800 mm, spindle bore: 100 mm, Condition: good (used), Year of construction: 1994, Binns and Berry Type Trident 800 CNC Double Gap Bed Centre Lathe Swing Over Bed 800mm, Distance Between Centres 3000mm, Spindle Speed Maximum Rpm 1200, Spindle Bore 100mm, 500mm 3 Jaw Chuck, , 3 Point Steady, , Quick Change Tool Post, Range of Tooling . CONTROL : Simiens 808 (retrofit in 2023) Gw9lkl3

more

Listing

YANTRANG CNC AUTOMATION PVT LTD VTL1250 TM

Rajkot

7,011 km

Vertical Turnmill Lathe

YANTRANG CNC AUTOMATION PVT LTD VTL1250 TM

€122,800

Call

Condition: new, Vtl 1250 TM OCTAGONE SHAPE QUILL HEAVY CAST IRON STRUCTURE MAX TURNING:1500MM FACE PLATE:1250 CROSS SLIDE TRAVEL: 750MM Bhwap9alm8b MAX JOB HEIGHT :1500 VERTICAL QUILL TRAVEL: 950

more

Listing

YANTRANG CNC AUTOMATION PVT LTD FLAT BED CNC LATHE

Kotharia

7,013 km

HEAVY DUTY CNC LATHE

YANTRANG CNC AUTOMATION PVT LTD FLAT BED CNC LATHE

€68,000

Call

Condition: new, Year of construction: 2023, MODEL:FB1250/2000 Fzgcsnc Swing :1700mm Max turning dai:1500 Max turning lenght:ABD2000MM 4STATION HEAVY DUTY TURRET FANUC CONTROLLER

more

Auction

Shropshire, UK

301 km

Automatic Lathe

Wickman Multi-spindle (6) Lathe

11 days left

Details

Condition: used, Wickman Multi-spindle (6) Lathe 2 1/4" (57mm) Capacity 6 spindle Automatic Lathe ( Electric Clutch), Thread Chasing Drive in Position 4, Standard Bar Feed & Screw Type Swarf Conveyor. S/No. 15753 Dm9hhd Please Note: This lot is located in Cleobury Mortimer, Shropshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Listing

Butzbach

979 km

Crankshaft Turning Lathe

VDF BOEHRINGER 135 Z/CNC

Call

Condition: used, Year of construction: 1999, machine/vehicle number: 1325.0458-14, Lathe with 4 tools only for 3-cylinder crank shaft Bb3ot37bqys

more

Listing

Deutschland

1,034 km

BERG & SCHMID SBS 300 VA-I / CNC

Call

Condition: new, 300 mm Cketktfre 300 mm 300 x 260 mm saw band length 3920 x 34 x 1,1 mm table height 780 mm band speed 20 - 100 m/min total power requirement 3,7 kW weight of the machine ca. 1,65 t dimensions 2,0 x 2,05 x 1,7 m

more

Listing

Deutschland

1,034 km

BERG & SCHMID SBS 460 VA-I / CNC

Call

Condition: new, 460 mm 460 mm 460 x 460 mm saw band length 5450 x 41 x 1,3 mm table height 800 mm band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,2 t dimensions 2,675x 2,15 x 2,05 m Bh2y28wmnr

more

Listing

Deutschland

1,034 km

BERG & SCHMID SBS 330 VA-I / CNC

Call

Condition: new, 330 mm 330 mm 400x330 mm Bgwjqqzlff saw band length 4570 x 34 x 1,1 mm table height 800 mm band speed 20 - 100 m/min total power requirement 3,7 kW weight of the machine ca. 2,35 t dimensions 2,23 x 2,15 x 1,8 m

more

Listing

Deutschland

1,034 km

BERG & SCHMID SBS 550 VA-I / CNC

Call

Condition: new, 550 mm 550 mm 550 x 550 mm saw band length 5980 x 41 x 1,3 mm table height 800 mm Bh2y3ihsbs band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,8 t dimensions 3,0 x 2,15 x 2,2 m

more

Listing

Wishaw

56 km

Mori Seiki SL 65A

Call

Condition: good (used), Model: SL 65A Control: Moric – T5F (Fanuc) Capacity: 890 x 900mm Spindle Speeds: 4-1800 RPM Spindle Bore: 105mm Dm7qvp

more

Listing

Burscough

203 km

CNC Lathe

Colchester Tornado 300

Call

Condition: good (used), Year of construction: 1997, Year 1997 Under power for any inspection - We welcome any viewings 3 Phase Fanuc Series OT CNC Control F3fwow9 Swarf Conveyor 530mm swing over bed 300mm swing over cross slide 800mm between centres 3000rpm spindle speeds 22kw motor VDI Tooling & jaws included

more

Listing

United Kingdom

0 km

Muratec MT100

Call

Condition: excellent (used), Year of construction: 2016, MURATEC MT100 WITH MURATEC FANUC CNC CONTROL (2016/03) INSTALLED 2018, GANTRY UNLOADING SYSTEM & LNS ALPHA SL65S BAR FEED Fljj9weyh Twin Spindle Collet Chucks (Spindle Nose JIS A2-5). Twin Turret Both With 'Y' Axis. Maximum Swing Ø190mm. Axis Travel Upper Turret 'X'=150mm, 'Z'=620mm, 'Y'=±30 mm. Lower Turret 'X'=150mm, 'Z'=620mm, 'Y'=±30 mm. Right Spindle Travel 'Z'=680mm. Axis Rapid Traverse 'X'=24m/min, 'Z'=40m/min, 'Y'=12m/min, 'Z's'=36m/min. 15 Station Turrets. Maximum Spindle Speed 6,000rpm (11kW Motor). Maximum Driven Tool 6,000rpm (2.2kW Motor). Maximum Bar Size Ø51 x 620mm. Power on 14,751h, Run Time 13,329h, Cutting 5,962h. S/No.15KX312450001018), Bar Feed S/No.29115001 (2018).

more

Listing

Thurmaston

338 km

Doosan Lynx 2100

Call

Condition: excellent (used), Year of construction: 2017, Swing over bed 600mm, swing over carriage 400mm, bar capacity 65mm, machining diameter 350mm, machining length 550mm, 12 position turret, Fanuc i control, Bioiexwf38q Spindle 4500 rpm, swarf conveyor, tool setter, parts catcher, tailstock

more

Listing

Wishaw

56 km

Mori Seiki SL 65

Call

Condition: good (used), Model: SL 65 Control: Fanuc I5-T Capacity: 760 x 900mm Bhnpvnkvj Spindle Speeds: 4-1010 RPM

more

Listing

United Kingdom

0 km

Dean Smith & Grace 30P X 120

Call

Condition: good (used), Year of construction: 2013, DEAN SMITH & GRACE 30P X 120, 15" HOLLOW SPINDLE MANUAL PLUS CNC OIL COUNTRY LATHE WITH HEIDENHAIN CONTROL Bihxq0v3goo Ø760mm 4 Jaw Chuck & Rear Spindle Chuck. Maximum Swing Over Bed Ø813mm. Maximum Swing Over Saddle Ø508mm. Distance Between Centres 3,005mm. Spindle Bore Ø375mm. 4 Speed Gear Box-Maximum Geared Speed Ranges 35, 177, 250, 355rpm. QTC. S/No. 42390 (2013).

more

Listing

Thurmaston

338 km