Used Cnc Lathe With Y Axis for sale (17,759)

Condition: ready for operation (used), controller manufacturer: Siemens, empty load weight: 55,000 kg, 2-koloms portaalfreesmachine tussen de kolommen: 2550 mm!! Csdpsv Sfkasfx Adaehd 5-assige freeskop koeling door spindel totaal vermogen: 90 kVa Longitudinal travel X-axe: 8000 mm Cross travel Y-axe: 2500 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2500 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Power needed (KVA): 90 ACCESSORIES & TOOLING: toolchanger - 28 toolpositions

Condition: used, Year of construction: 2008, turning diameter 720 mm turning length 2200 mm control OSP-P-200L workpiece weight flying clamped 300 workpiece weight 1000 kg z-travel 2215 mm y-travel 660 mm z-travel 250 ( -125 / +125 ) mm c-axis 360 0 Codexuv Hmepfx Adaehd b-axis -15 / +195 ° tailstock quill taper metric 120 mm tailstock - travel of quill 250 mm tool changer 32 Plätze total power requirement 55 kW weight of the machine ca. 28 t dimensions of the machine ca. 7x3,1x3 m

Condition: used, machine/vehicle number: L2SIH0236, turning diameter over cross slide: 700 mm, turning length: 1,500 mm, spindle bore: 80 mm, Leadwell LTC 30 BPL, CNC Turning Centre with Fanuc OT Control, fitted with 300mm dia 3 jaw chuck Made in Japan, approx 700mm swing x 1500mm centre distance, spindle bore 80mm,  operators foot pedal, Serial Number L2SIH0236, swarf conveyor, Chsdpfx Adjw A Rqrjaed

Condition: good (used), Ecoca MT-312/750 CNC Lathe FANUC 21iTB, 12″ Chuck, 2006 Codoxpnl Depfx Adaehd Year: 2006 Control: FANUC 21iTB Chuck Size: 12″ (305 mm) – 3-Jaw Swing Over Bed: 600 mm Swing Over Cross Slide: 330 mm Max Turning Diameter: Over Bed: 450 mm (17.7″) Over Cross Slide: 330 mm (12.99″) Z-Axis Travel (Turning Length): 730 mm (28.74″) Spindle Power: 24.8 HP (18.5 kW) Spindle Speed: Up to 3,200 RPM Tool Turret: 12-station Tailstock: Included Tool Arm: Included

Condition: good (used), Year of construction: 2007, turning length: 600 mm, spindle bore: 33 mm, Distance between main spil and left turret 404 mm Cedsxtb Nwspfx Adajhd Distance between spil and sub spil nose minimum 260 mm Distance between spil and sub spil nose maximum 760 mm Max. turning Ø: 180mm X-Axis: 160mm Z-Axis: 210/600mm Spindle bore: 33mm Speedrange: 4000Rpm Spindle power: 7.5kW Subspindle speeds:4000Rpm Subspindle bore: 7.5mm Length: 3100mm Width: 1700mm Height: 1800mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, turning length 4000 mm turning diameter over bed 1000 mm turning diameter over cross slideways 900 mm centre height 1090 mm Chedpfx Aexukvpjdajd control SIEMENS 810D max. workpiece weight 1500 kg Rotating speeds 1000 U/min bed width 355 mm max. workpiece weight 3000 kg dia. of quill 180 mm spindle passage 155 mm engine output 40 kW weight of the machine ca. 3,15 t required space 3,51 x 1,80 x 2,02 m GURUTZPE A-1200 G4 CNC lathe with milling and grinding equipment

Condition: used, Year of construction: 2008, turning diameter 0410 mm turning length 500 mm control Plus iT Heidenhain turret head 12 pos. VDI 30 swing over bed 520 mm spindle turning speed - stepless 25 - 5000 rpm spindle bore 87 mm feed - longitudinal/cross mm/min rapid travel - longitudinal/face 24/20 m/min dimensions 5000 x 1800 x 1800 mm total power requirement 44 KVA Csdpexukqmsfx Adashd weight of the machine ca. 5,0 t Machine is with C- axe and life tooling! Control: Heidenhain Plus iT. Machine has chip conveyor, chuck and tailstock.

Condition: good (used), Year of construction: 2010, Bar capacity 50.8mm, maximum cutting diameter 279mm, maximum cutting length 274mm, Spindle power 11Kw, Spindle speed 6,000rpm, 12 station turret, fitted with collet chuck, tool setter and magazine barfeed unit. Cjdpfxexlch Ss Adaohd

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 1,630 mm, turning diameter: 500 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 430 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 1,474 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 20 m/min, total height: 23,000 mm, total length: 54,050 mm, total width: 28,880 mm, Equipment: documentation/manual, Okuma MacTurn 30 - 1500 OSP U100L CNC-Controller Cedpfx Adjrdvhheashd Number of axis - 5 +2 Swing over bed - Ø500mm Swing over carriage - Ø500mm Max dia. turning - Ø500 mm Max turning length - 1474 mm X axis Upper travel - 430 mm X axis Lower travel - 140 mm Z axis Upper travel - 1474 mm Z axis Lower travel - 1305 mm Y axis travel - 190 mm (+95/-95mm) W axis travel - 1305 mm C axis 360° (0.001 increment) Rapid travers Upper X-axis 20,000 mm/min Lower X-axis 15,000 mm/min Upper Z-axis 25,000 mm/min Lower Z-axis 20,000 mm/min Y -axis 12,000 mm/min C-axis 200 rpm Spindle nose - JIS A2-6 Main spindle speed - 45-4500 rpm Sub spindle speed - 45-4500 rpm Main spindle power - 15 kW Sub spindle power - 15 kW Main spindle diameter - Ø100 mm Sub spindle diameter - Ø100 mm Main spindle boring - Ø62 mm Sub spindle boring - Ø62 mm Rotary tool spindle - 6000rpm Rotary tool spindle - 6,8kW ATC Magazine - BT40 Tool storage capacity - 40 tool Max tool dia. - Ø110 mm Max. tool lenght 300 mm Max. tool mass - 10 kg Chip conveyor type high Wight - 12100kg

Condition: excellent (used), Harrison Alpha 1550 XS Manual / CNC Lathe Year: 2018 Control: FANUC Oi-TF Swing Over Bed: 554mm Swing Over Cross Slide: 370mm Swing in Gap: 830mm Distance Between Centres: 2000mm Spindle Bore: 104mm dia. Spindle Speeds: 1 to 2000 RPM Quick Change Toolpost Boring Bar attachment Cjdpjxpnk Tjfx Adaohd

Condition: excellent (used), Year of construction: 2020, SIEMENS 840D SL control unit MAIN SPINDLE Speed 5.000 1/min Spindle bore 65 mm COUNTER SPINDLE Speed 7,000 1/min Spindle bore 42 mm 2 REVOVER Travel X1, X2 180mm Travel Y1 ±45mm Travel Z1= 704mm, Z2= 620mm 12 stations per revover all driven Cjdpfxjvi Nizo Adashd Chip conveyor Bar loading magazine TOP X-FILES XFS/7.3

Condition: used, Year of construction: 2013, functionality: fully functional, HWACHEON - Cutex 160 B Offer Details Stock Number: 1039-9338 Machine Type: CNC Lathe Manufacturer: HWACHEON Model: Cutex 160 B Year of Manufacture: 2013 Control System: Fanuc Oi-TD Location: D-59302 Oelde Country of Origin: Korea Delivery Time: by arrangement Freight Terms: ex location Additional Information: CNC Lathe HWACHEON - Cutex 160 B Operating Hours: - Control on: approx. 26,932 h - Machining time: approx. 7,546 h WE OFFER YOU: - Workshop-inspected machines - Free loaded on truck - NO auction fee Chsdpfx Ajxt N I Iedaod - Delivery possible (at extra cost) - Unloading and commissioning (at extra cost) Technical Details Turning diameter max.: 300 mm Turning length max.: 284 mm Control: Fanuc Oi-TD Swing diameter over bed: 550 mm Chuck diameter: 210 mm Spindle nose: A2-6 Main Spindle: Max. speed: 4,500 rpm Spindle bore: 62 mm Bar capacity: 51 mm Spindle bearing diameter: 100 mm Main spindle drive power: 11 / 7.5 kW Travel: X-axis travel: 170 mm Z-axis travel: 335 mm Tool Turret: Number of tool stations: 12 positions Tool size: Ø25 x Ø40 mm Feed Rates: Rapid traverse (X / Z): 36 / 36 m/min Tailstock: Quill diameter: 60 mm Quill stroke: 80 mm Tailstock taper: MT 4 Total power requirement: 25 kVA Machine weight approx.: 3.2 t Space requirement approx.: 8.5 x 2.5 x 2.0 m Accessories - Documentation - Chip conveyor - Coolant system - Tailstock - Signal lamp - Parts catcher - Hydraulic unit - 3-jaw chuck: SEOAM CAH-08 - Collet chuck: HAINBUCH nova size 65 - Tool measurement - Interface for bar feeder - Bar loading magazine: Breuning SIMAG 70.1-3000 - Various toolholders

Condition: used, Year of construction: 2000, turning diameter 0420 mm turning length 635 mm control 21i-T Fanuc turret head 12 pos. swing over bed 570 mm Chsdexukqtjpfx Adaod spindle turning speed - stepless 25 - 5000 rpm spindle bore 79 mm feed - longitudinal/cross mm/min rapid travel - longitudinal/face 24/20 m/min main drive motor 28/21 (40/100%) kW total power requirement 44 KVA weight of the machine ca. 5,7 t dimensions of the machine ca. 5,5 x 3 x 1,8 m Control: Fanuc 21i-T. Machine is with tailstock. Machine has dust exhaust and chip conveyor.

Condition: used, Year of construction: 2012, Max. part diameter 39 mm Max. part length 65 mm max. turning length 58 mm control Siemens x-axis 750 mm z-axis 180/140 mm spindle tunring speed 6.000 U/min drive capacity - spindle motor 13,7 kW rapid traverse (x/z) 60/30 m/min Acceleration (x/z) 7 m/s² Tool compensation axis 3 mm Tool holder for turning tools Capto C 4 weight ca. 7.000 t In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories: - Step conveyor, Knoll - Chip conveyor, Knoll - Robot, Fanuc - Tilting device, Sachwarz Chsdpfx Aexuv Uqedajd - Hydraulic unit, Bosch Rexroth Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: excellent (used), Year of construction: 2005, operating hours: 51,558 h, functionality: fully functional, machine/vehicle number: 02280000921, Used CNC lathe Chjdjwlaqgepfx Adasd Make: GILDEMEISTER Type: CTX520 Linear Year of manufacture: 2005

Condition: used, Year of construction: 2017, functionality: fully functional, turning length: 3,000 mm, turning diameter: 805 mm, Used CNC cycle lathe with C-axis, featuring the following specifications: Distance between centers: 3,000 mm Center height: 400 mm Swing diameter over bed: 805 mm Swing diameter over carriage: 720 mm Swing diameter over cross slide: 515 mm Cross travel: 400 mm Carriage length: 900 mm Cross slide length: 750 mm Bed width: 425 mm Spindle bore: 105 mm Spindle nose: A2-8/8 Spindle taper: MT 5 Speed range: 1st range: 0 – 425 rpm 2nd range: 425 – 1,700 rpm Feed rate: 0 – 7,000 mm/min Rapid traverse Z-axis: 10,000 mm/min Rapid traverse X-axis: 10,000 mm/min Ball screw Ø Z-axis: 50/10 mm Ball screw Ø X-axis: 32/5 mm Tailstock quill Ø: 106 mm Tailstock quill stroke: 215 mm Tailstock taper: MT 6 Number of tool stations: 12 Tool shank: 32 mm Boring bar: 50 mm Positioning accuracy: 0.01 mm Repeatability: 0.01 mm Motor power: 17 kW Pump motor: 0.57 kW Flow rate: 50 l/min Coolant tank capacity: 225 l Machine dimensions (LxWxH): 5557 x 2077 x 2227 mm Machine weight approx.: 6,460 kg Standard equipment: • CNC control, Fagor brand, model 8055 • Z/X-axis servomotors • Electronic handwheel for X and Z-axis • Servo spindle motor • Coolant system • Spindle sleeve and fixed centre MT 6 • Partial enclosure • Automatic shifting gearbox by Baruffaldi • Automatic lubrication system • Manual tailstock • Work light • Leveling bolts and nuts • Operating and programming manuals in German • CE version including CE Declaration of Conformity • For connection 400V, 50Hz, 3-phase Special equipment: • “C-axis”, continuous positioning • 1 piece 12-station disc turret, Baruffaldi brand, model TBHMA200-12, for live tools with VDI 40 mount • 2 pcs radial tool holders for live tools, VDI 40, type PRR-S-40-ER32/50-T • 1 pc axial tool holder for live tools, BMT65-A-ER32/50-T • 1 pc hydraulic chuck, Ø 400 mm, hydraulic cylinder Ø 92 mm, and hydraulic tailstock quill • Renishaw tool measurement system on the machine • 1 pc chip conveyor • 1 pc fixed steady rest for Ø 10–300 mm • 1 pc fixed steady rest for Ø 300–530 mm • 1 set soft jaws for Ø 400 mm chuck • 1 set hard jaws for Ø 400 mm chuck Cedpfsxr U H Hox Adaohd By the way, besides competitively priced new machines and inspected used machines, you can also expect more from us: • On-site consultation and solution finding • Organization of transport to your facility • Installation, commissioning, and handing over ready for operation • Spare parts supply • Control training for Siemens, Heidenhain, and Fanuc • Trained service personnel also in your area, etc. • 24/7 telephone availability • Tax-optimized trade-in of your old machine • Favorable financing, even without down payment Enquire now! Image shows machine as a new version with 2000 mm center distance.

Condition: ready for operation (used), controller manufacturer: Siemens 840D, empty load weight: 24,000 kg, Universum 6 koeldeur spindel met vaste haakse freeskop + specifieke gereedschapswisselaar werkgebied kan in twee secties verdeeld worden verplaatsbare bedieningspaneel (4 meter) lucht/lucht warmtewisselaar Chedexqh Smepfx Adajd elektronisch handwiel kleurenmonitor Longitudinal travel X-axe: 4000 mm Crosstravel Y -axe: 800 mm Travel Z-axe (Height): 600 mm Dimensions clamping space - table: 4100 x 900 mm Max Height of workpiece: 820 mm Power on spindle: 20/26 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 6000 rpm Power needed: 50 kVa Coolant pump: yes

Condition: used, Year of construction: 2014, control Haas Cedpfx Aoxuv Spjdaehd weight of the machine ca. 6487 kg

Condition: new, Year of construction: 2025, 0583 mm Cjdpfswp Tqnjx Adashd 1710 mm 82 mm 436 mm 3000 U/min A1-8 DIN 55026 100 mm 235 mm

Condition: used, turning diameter 250 mm Chodpfx Ajxuv Ukodaod turning length 610 mm control ARIX CNC spindle bore 54 mm tail stock MK4 turning speeds 20 - 6000 U/min weight of the machine ca. 3,5 t

Condition: used, Year of construction: 1997, functionality: fully functional, GILDEMEISTER - CTX 500 Offer Details Stock number: 1039-9180 Type of machine: CNC lathe Manufacturer: GILDEMEISTER Model: CTX 500 Year of manufacture: 1997 Control: Eltropilot Heidenhain Location: D-59302 Oelde Country of origin: Germany Delivery time: immediately Freight basis: ex stock Additional information: Cjdpoxtpd Aefx Adajhd CNC Lathe GILDEMEISTER - CTX 500 WE OFFER YOU: - Workshop-inspected machines - Free loading on truck - WITHOUT auction fee - Delivery possible (at extra cost) - Unloading and commissioning (at extra cost) Technical Details Turning length: 1,000 mm Swing diameter max. over bed cover: 600 mm Swing diameter over cross slide: 420 mm Control: Eltropilot Heidenhain Travel - X-axis: 275 mm Travel - Z-axis: 1,065 mm Main spindle: Spindle speed range: 16 - 3,200 rpm Main spindle drive power: 27 kW Max. torque: 800 Nm Spindle diameter at front bearing: 120 mm Spindle bore: 85 mm Chuck diameter: 260 mm Spindle nose: 220H5 Turret: Number of tool stations: 12 positions Shank diameter: 40 mm Turret indexing time: 0.8 sec. Tailstock: Quill diameter: 100 mm Quill stroke: 120 mm Quill fitting: Morse Taper 5 (MT 5) Quill pressure: max. 950 daN Feeds: Rapid traverse X: 10 / Z: 15 m/min Feed force X: 500 / Z: 1,000 daN Total connected load: 52 kVA Machine weight approx.: 7.5 t Space requirements approx.: 5.5 x 2.5 x 2.1 m Accessories Documentation Chip conveyor Coolant system Tailstock Hydraulic unit Three-jaw chuck SMW KNCS-N-260-72 Tool changer 12 positions

Condition: ready for operation (used), total height: 3,300 mm, total width: 3,450 mm, total length: 6,000 mm, controller manufacturer: Siemens, empty load weight: 17,000 kg, Model: FTV 850 Koeling door spindel Het werkgebied kan in twee secties worden verdeeld 2 magnetische tafels Bewegende kolom, vergelijkbaar met Mazak VTC / Unisign / Hedelius Zware chassisstructuur Longitudinal travel X-axe: 1800 mm Crosstravel Y -axe: 850 mm Travel Z-axe (Height): 800 mm Dimensions clamping space - table: 2300 x 900 mm Universal (2x 360°): ISO 50 Boring head (1 x90°): 19 kW Cedpfx Aowxz D Uodaohd

Condition: used, Year of construction: 1999, turning length 600 mm control Fanuc OT Chedpfsxuv Sisx Adaed

Condition: used, Year of construction: 2011, turning diameter 200 mm control DMG weight of the machine ca. 5200 kg Csdpexuv Scofx Adaohd

Condition: used, Year of construction: 2007, turning diameter 246 mm turning length 445 mm control Fanuc 32 Csdpfoxuv R Sex Adashd weight of the machine ca. 4250 kg