Used Cnc Plasma Cutting Systems for sale (53,413)

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-6020-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 6100 mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 6750 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 2600.0 kg Ihsdpfx Ash E Iyzsddst - Maximum load: 5000.0 kg - Adjustable support legs: 10 pcs Systems THC – Torch Height Controller – The integrated cutting height control system automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the programme information about the angle of the material in relation to the table. Assistance by a specialist We are committed to staying in continuous contact with our Customers; therefore, we meet this challenge by offering a package of hours to be used for the Otinus Professional Assistance within every machine purchased. Otinus Academy This is a constantly growing e-learning platform created for Otinus brand Clients. By purchasing this machine you will gain a year access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Supplied with machine Installation of the machine and training in the use of the machine at our Clients' sites. - 1 day, up to 8 hours - installation of the machine and learning to use the controller. Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-2010-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1020 x 2100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 2650 mm - Width: 1780 mm - Height: 1500 mm - Total mass: 800.0 kg - Maximum load: 800.0 kg - Adjustable support legs: 4 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Iedpfx Adsh E Iytedeht Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-2512-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1270 x 2600mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Iodpsrp A Ukefx Addoht Structure specifications: - Length: 3150 mm - Width: 2030 mm - Height: 1500 mm - Total mass: 1050.0 kg - Maximum load: 1750.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems GCS – Gas Cutting System – An integrated oxy-fuel system that can cut sheets up to 150mm thick. THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCO-3020-D The machine was engineered and manufactured in Poland. Ihjdpfx Aorp Dcrsddjt Working parameters: - XY operating range (working area): 2020 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1450.0 kg - Maximum load: 2000.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 245, type of input current: three-phase, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, working width: 2,000 mm, working length: 6,000 mm, color: red, Equipment: documentation/manual, lighting, For sale: an excellent plasma gas-oxygen cutting machine from a renowned brand with 8000W power. STIGAL DYNAMIC SPEED, Cebora 165. Manufactured in 2012, 400V supply voltage. Serial number 245. The cutting machine is in continuous operation and regularly serviced. Fully operational! Technical specifications of the STIGAL DYNAMIC SPEED plasma cutter: working area (L x W): 6000 x 2000 mm, positioning accuracy: +/- 0.05 mm, travel speed: 22 m/min, maximum power consumption: 8000 W. Viewing is welcome. Isdpfxjx S E Nze Addjht

Year of construction: 2007, condition: excellent (used), machine/vehicle number: 20051619, Basic Functions: Slit, Cross cut, Crease In-feed paper size: 210(W)x210(L) to 370(W)x520(L)mm Minimum finished size: 55(W)x45(L)mm Paper weight: 120 to 400gsm *Depending on paper quality Operation: 4" Touch Screen Job memories: 263 preset jobs & 150 customized job memories. (100 MANU SET + 50 FLEX MODE) Feeding mechanism Upper belt tri-suction suction feed (Patented) Side blower Skew adjustment Side aligner Double feed detection Cut mark registration Feed tray stacking capacity: 100mm Iodpfx Ashii Swsddeht Speed 8.8 sheets / min. : SRA3 21up business card 11 sheets / min. : SRA3 8up post card 12.2 sheets / min. : SRA3 4up greeting card 15.4 sheets / min. : A4 2 cuts & 1 crease

Condition: excellent (used), Year of construction: 2016, Portal plasma cutting system KOIKE MOD. DELTATEX 4000. Useful vertical transversal cut: mm 3,000. Useful vertical longitudinal cut: mm 12,000. Length of runways: mm 14,000. Movement speed: mm/min 24,000. Gantry guide system: X - Y axes, rack and pinion. Type of trolleys installed: 1x Trolley for KOIKE 3D Link plasma support. Numerical Control: KoiKe Katana. Ihodpfxjv Sua Re Addet Source: KJELLBERG HF 280i. Recommended cutting capacity plasma KJELLBERG HF 280i.: Cooling unit KWE 360. -Vertical plasma: 35 mm (in production) CS/SS. -Maximum vertical plasma breakthrough: 40 mm CS/SS. Visible in operation, excellent condition.

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 5125 mm Measurements height 2100 mm Control Unit Brand ESAB Model EPP-360 Vis 51 Main Drive Spindle speed range 50.8–25000 mm/min Number of axis 3 Isdpfx Adjx R E Smodjht This 3-axis ESAB Combirex DX 4000 plasma cutting machine was manufactured in 2012. It features the ESAB WELDING & CUTTING Vission 51 control and a Precision Plasmarc 368 plasma source. Capable of cutting up to 40 mm with plasma and 300 mm with gas, it offers a cutting area of 3000 × 13000 mm. Consider the opportunity to buy this ESAB Combirex DX 4000 plasma cutting machine. Contact us for more information. Application Types Cutting

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: CNC Plasma Cutting Machine for Flue Pipe and Ventilation Component Production Condition: Used, in good technical order, currently connected – available for on-site inspection and testing. This equipment is designed for manufacturing pipes, flue pipes, and ventilation elements from sheet metal and light metals. Technical Specifications Model: TTENGINEERING Made in: Italy Year of manufacture: 2007 Pipe cutting diameter: from Ø60 mm to Ø600 mm Maximum workpiece length: 1500 mm Sheet thickness (official): 0.5 – 1 mm Tested capability: cuts up to 3 mm wall thickness (depending on plasma source power and metal type) Plasma sources: 2 units – 60A and 80A Plasma power: 60 A / 80 A (depending on selected source) Features and Equipment: - Fully programmable CNC-controlled machine - Capability to generate cutting contours based on models or templates - Precise automatic positioning and rotation system - Adaptable to different pipe diameters - Integrated plasma cutting control system with adjustable power - Supplied with two plasma sources (60A and 80A) to suit product requirements Applications: - Suitable for the production of ventilation systems, flue pipes, air ducts, and various tubular structures. - Ideal for cutting thin sheet metal (0.5–1 mm) and processing thicker wall sections (up to 3 mm). - Utilizes CNC technology to ensure high cutting precision and repeatability while reducing manual labor needs. Ihodpfx Adexlp Sqedjt If you have any further questions, please do not hesitate to contact us.

Year of construction: 2012, condition: good (used), - for foils, cork, veneer etc. Ihjdsn Hxiiopfx Addst - Rotary cross section - cutting width max. (mm): 2100 - heating: included - cooling: included

Condition: good (used), Year of construction: 2019, Type: Gammatec 2040 Machine number: KE2019010 Cutting size: 4,000 x 2,000 mm Max. sheet thickness: 30 mm Number of torches: 1 Control: Kjellberg Finsterwalde HiFocus 280i / PGV 3-440 / KWE 360 Connection: 2 kVA Cooling type: Equipment: Dimensions: 5,000 x 2,400 x 1,000 mm Iedpfx Adox Ndpnsdsht Weight: approx. 4 t

Condition: defective spare-parts repository (used), Year of construction: 2006, functionality: not functional, type of input current: three-phase, overall weight: 1,500 kg, input voltage: 230 V, total width: 2,450 mm, total height: 1,550 mm, total length: 10,000 mm, table height: 800 mm, positioning speed: 20,000 m/min, space requirement length: 10,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, height adjustment type: pneumatic, ESAB E-Vent Plasma Cutting System + Hypertherm Powermax 1000 – Year of Manufacture 2006 – Defective / For Hobbyists For sale is an ESAB MXL-P 2000, E-Vent plasma cutting system (year 2006) including a Hypertherm Powermax 1000 plasma source. The machine is defective and is being sold as a non-working unit/parts donor. The Powermax 1000 is present; operational status has not been tested. Key technical data (ESAB E-Vent): * Machine length: approx. 7000 mm * Cutting length: approx. 6000 mm * Machine width: approx. 2450 mm * Cutting width: approx. 1500 mm Ihjdpfx Adex Ap Tpjdjt * Machine height: approx. 1550 mm * Weight: approx. 1500 kg * Voltage: 230 V / 50 Hz, Power consumption 2 kVA Ideal for: * Refurbishment * Conversion to new control system * Parts procurement (gantry, guides, table, plasma source) No warranty, no returns.

Condition: good (used), Year of construction: 2000, CNC Gantry Plasma Cutting Machine Ihsdpshwtn Iofx Addot Manufacturer: Messer Model: Omnimat L5000 Year of manufacture: 2000 CNC control: Fanuc Working area: 3000 x 6000 mm Extension possible 1 plasma torch with Hypertherm HT2000 power source 3 oxy-fuel torches without table without filter 161225ä

Condition: used, Year of construction: 2006, CNC portal flame cutting machine Manufacturer: Bach Model: ACK-2D Year of manufacture: 2006 Isdew El Udjpfx Addsht CNC control: NBS300 Worktable: 1.5 x 6 m 2 oxy-fuel torches 101225ä

Condition: used, Year of construction: 2017, operating hours: 4,032 h, functionality: fully functional, TCI BP-C 4020 Combi Excellent condition Still in daily use and can be inspected under power at any time Cutting area 4000x2000 Plasma 130A Many wear parts included Ihsdpfx Adoxtu E Eodst Additional stainless steel grid table for cutting aluminium and stainless steel sheets

Condition: used, Year of construction: 1998, sheet thickness: 8driving power: 18,5weight approx.: 5800messurements (LxWxH): 2130 x 3260 x 2360sheet length: 1550 Max. cutting length: 1550 mm side. Projection in column: 50 mm Sheet metal passage: 16 mm Cutting angle adjustable: 2°30 - 0.5° Empty strokes: 25 - 32 Number of hold-downs: 8 Cutting pressure: 280 bar Oil filling: 300 l Total connected load: 20.1 kW External dimensions: 2130 x 3260 x 2360 mm with - CNC control SIEMENS S 5 for numerical sheet metal bending - Holding up device mot. Scrap switch - Sheet metal removal with conveyor belt Iedpjvaatljfx Addsht - Cutting gap and cutting angle with control programmable - Spare blades - Shear blade for 750 kg strength - Separate hold-down actuation, e.g. cutting after cracking - Hold-down pressure can be set and read from the front - 2 rocker stops - Finger protection with recessed grip - Balls in the support table - Angle stop with Norius -Foot switch used in good condition Price on request. Delivery: from warehouse or location free loading truck. Payment: in the case of takeover purely net or by agreement. Technical specifications are non-binding. Errors excepted.

Condition: used, pressure: 70throat depth: 750messurements (LxWxH): ca. 900 x 2300 x 1900 Hole punch GEKA Puma 70/E-750 Specifications: Punching force            70 t Punching capacity      27 in 20 mm Punches max. Drm.    70 in 8.0 mm or Drm.                        100 in 5.0 mm or Rectangular             50 in 8.0 mm or Rectangular             60 in 7.0 mm or Rectangular             70 in 6.0 mm Projection                     750 with -Separate PT 700 / Leonard and Bauer Economic controller for positioning table for punching Ihedpjwrkcyofx Addjt -Foot switch

Condition: like new (used), Year of construction: 1991, machine/vehicle number: 176063, Plasma cutting machine CORTA PS 3100 Year of construction 1991/retrofit, machine number: 176063 Cutting area: 4000 x 2000 mm Alternating operation of 2 cutting processes: Iodsvfmiwepfx Addjht 1x plasma cutting unit Stak Pak ll, 105 Ampere 1x oxyfuel cutting torch MG 12 SE 30 CPS control unit DNC connection Graphic base version Trajectory: 6000 mm 1 torch suspension MG 200 K arc-dependent scanning 1 plasma interlock Portal carriage, cross carriage Torch suspension MG 200 K Cutting table 4200 x 2100 x 700 mm Modular, technically advanced Stak Pak II plasma cutting system, 105 amps 1 control module CM 6032 3 power modules PM 6042 1 PCM 35 torch, 15 m 1 PCM 140 torch, 15 m 1 cooling module ex works

Condition: good (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 63 mm, sheet thickness steel (max.): 63 mm, sheet thickness aluminum (max.): 50 mm, overall weight: 10,000 kg, input voltage: 400 V, cutting speed: 3,850 mm/min, total width: 3,000 mm, total height: 2,000 mm, total length: 13,000 mm, repeat accuracy: 0.2 mm, workpiece weight (max.): 20,000 kg, cutting current: 260 A, Koike plasma cutting machine Working area: Length: 12,000 mm Width: 2,600 mm Cutting capacity Mild Steel (Dross Free) Production pierce: 32 mm (1-1/4") Maximum cutting capacity: 64 mm (2-1/2") Stainless Steel Production pierce: 32 mm (1-1/4") Maximum cutting capacity: 50 mm (2") Aluminum Production pierce: 25 mm (1") Maximum cutting capacity: 50 mm (2") Cutting speed Mild steel, manufacturer's specification at maximum output current 12 mm (1/2"): 3,850 mm/min (145 ipm) Cut quality Cut angle (ISO 9013 range): 2–4 Weldability: Ready to weld Process gases per material (Plasma / Shield) Mild Steel: O₂ / Air O₂ / O₂ Ar / Air Stainless Steel: Ijdpfjyanhhjx Addsht H35 / N₂ N₂ / N₂ H35-N₂ / N₂ F5 / N₂ Ar / Air Ar / N₂ Aluminum: H35 / N₂ Air / Air H35-N₂ / N₂ Ar / Air Ar / N₂ Cutting Amps: 30–260 A Filtering system included. Plenty of spare parts and cutting consumables included.

Condition: excellent (used), Year of construction: 2008, A used TruLaser 3530 laser cutting system is for sale. Technical data: - Operating hours: beam on 2955 h/laser on 15464 h - X-travel 3000 mm (max. 3104) - Y-travel 1500 mm (max. 1580) - Xp-travel 300 mm (max. 305 mm) - Z-travel 114 mm Ijdpoixl Tnofx Addjht - max. material thickness 20 mm - maintenance-free three-phase motors in X1, X2, Xp, Y1, Y2 and Z axes - max. positioning speed parallel to the axis 120 m/min - simultaneous 170 mm/min. - Acceleration when positioning X-axis 9 m/second - Xp + Y-axis 15 m/second - Cutting X-axis 4 m/second - Cutting Xp and Y-axis 15 m/sec. Standard equipment - Closed machine frame with integrated laser resonator - Movement unit for optimal processing speeds - Additional highly dynamic XP axis - Automatic pallet changer - Closed beam guidance - NitroLine, high-pressure cutting - FocusLine, constant focus position - Compressed air cutting - PierceLine, reduction of the piercing process - PlasmaLine, plasma sensors - SprintLine, fast processing - LensLine - FlyLine - ContourLine, for producing small holes - Microweld - Spray device - Position laser diode - Programmable cutting gas pressure - Automatic switch-off - Work area lighting - TruTops Laser lite - CO2 laser TruFlow 3200 with high-frequency excitation, mirror telescope and maintenance-free turbo radial blower - Laser control TASC 3, logbook function and cooling unit - Laser cutting head with 5 and 7.5 lens and quick-change device - ControlLine, capacitive height control and process control - Sinumerik 840D control: Open control - Causes of error messages via diagnostic functions Extended machine equipment - Pallet changing system - Laser cutting heads 5" and 7.5" - Additional laser cutting head with 3.75" lens for high-speed cutting - Dimensions in mm: approx. 9300 x 4600 x 2000, weight in kg: approx. 11500 Year of manufacture: 2008 Special price €55,000 net Machine has been dismantled. Can be viewed by prior arrangement. If you are interested, please contact us

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 60 mm, kaitec Smart – CUTTING TECHNOLOGY BY PROFESSIONALS FOR PROFESSIONALS With the highly economical plasma process, material thicknesses of up to 25 mm can be cut optimally. Automatic initial height detection, automatic arc control, and intelligent collision protection ensure maximum quality and the highest possible repeatability. The automated program sequence and the long service life of the consumables help to actively and significantly minimize cutting costs. The oxy-fuel process also impresses with its ease of use and functionality. Thanks to the automatic piercing function, preheating times and the activation of cutting oxygen are controlled by CNC. This allows sheets up to 80 mm thick to be cut very cost-effectively. The oxy-fuel system is available for acetylene or propane and is equipped with automatic height control. kaitec Smart – WATER TABLE SYSTEM The foundation of the flatbed design is a stable water table. The longitudinal guide mechanism is mounted with high precision on milled surfaces. The sturdy cutting grate features offset, serrated support blades, providing optimal sheet metal support and reducing slag formation on the workpiece as well as excessive wear of the blades, which saves real money on rework and maintenance. The depth of the trough is precisely designed to accommodate slag and ensure effective cooling; it is easy to clean and captures the dust produced during cutting. Cutting area: 1,500 x 1,500 mm 1,500 x 3,000 mm Ihodpfxox Ngn Ts Addst 1,500 x 4,000 mm Plasma material thickness: 1–25 mm Oxy-fuel material thickness: 10–80 mm Price: Machine price depending on configuration, tailored to your requirements from €38,900 plus plasma unit, transport & installation We look forward to your inquiry!

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 50 mm, kaitec Easycut – PLASMA & OXYFUEL CUTTING PERFECTION FOR METAL & STEEL CONSTRUCTION The kaitec Easycut is a highly flexible CNC gantry cutting system, specifically developed for cutting material thicknesses between 1 and 50 mm. Thanks to its space-saving flatbed design, it is ideally suited for a wide range of applications. The double-sided driven machine gantry ensures exceptional cutting results through high rigidity and precise mechanical guidance. Available in three cutting area sizes, the kaitec Easycut can be tailored exactly to your sheet metal processing needs. It impresses with its great flexibility in the compact cutting machine segment. Iedpfxsx Ngnyo Addoht kaitec Easycut – WATER TABLE SYSTEM The robust water table forms the basis of the flatbed design. The precisely aligned longitudinal guides and the sturdy, serrated cutting grate reduce slag, protect the slats, and minimize maintenance costs. Optimized tank depth enables efficient slag collection and cooling. In addition, the system is easy to clean and reliably captures cutting dust. kaitec Easycut – PROFESSIONAL CUTTING TECHNOLOGY FOR PROFESSIONALS With its highly efficient plasma process, material thicknesses up to 25 mm can be cut precisely and cost-effectively. Automatic initial height sensing, arc voltage control, and intelligent collision protection ensure maximum quality and repeatability. The automated cutting process and long consumable life notably reduce operating costs. The oxyfuel process also impresses with straightforward handling and reliable functionality. The CNC-controlled piercing function optimizes preheating times and automatically regulates the oxygen supply, enabling sheets up to 50 mm to be cut efficiently. The oxyfuel system is available for acetylene or propane gas and features automatic height control for consistently precise cutting results. Cutting Area: 1,500 x 3,000 mm Material Thickness Plasma: 1-25 mm Material Thickness Oxyfuel: 10-50 mm Price: Machine price depending on equipment, tailored to your requirements from €29,900 plus plasma unit, transport & installation We look forward to hearing from you!

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 60 mm, kaitec 1530 – Your Ultimate Solution for Precision Cutting! Are you looking for the best entry-level machine on the market? Your search ends here! With the kaitec 1530 plasma cutting system, you gain access to unrivaled cutting performance and unbeatable flexibility. No more reliance on external cutting services or dealing with lengthy lead times from suppliers. The kaitec 1530 plasma cutter is designed to give you full control over your cutting requirements. Its intelligent material utilization will save you money and reduce unnecessary transport costs. Say goodbye to long waits for your orders – you control the delivery schedule and work at your own pace. Our kaitec 1530 cutting system has taken the industry by storm—and for good reason. It combines performance, flexibility, and cost efficiency like no other. Eliminate dependency and delays—choose the kaitec 1530 plasma cutting system to boost your productivity, save costs, and accelerate your workflow. Welcome to the future of cutting! kaitec 1530 – Precision and Versatility for the Future of Cutting! Our innovative machine combines the power of plasma and oxy-fuel technologies, enabling you to cut materials with impressive thicknesses of up to 50 mm. Precision cutting has never been so easy. Thanks to our integrated cutting database for mild steel, aluminum, and stainless steel, you always have total control with optimal settings for every material. With 50 macros for creating cutting programs directly on the CNC controller, your possibilities are virtually limitless. The kaitec 1530 plasma cutter not only ensures efficient workflows but also cost optimization. Our intelligent remnant sheet management and cutting cost module help you reduce material waste and lower your production costs. Experience the future of cutting with kaitec 1530 and increase your productivity, efficiency, and profitability. Welcome to a new era in cutting! Cutting Area: 1,000 x 2,000 mm 1,500 x 3,000 mm Material Thickness (Plasma): 1–25 mm Material Thickness (Oxy-fuel): 10–60 mm Ihsdpex Ngl Sefx Addet Price: Machine price depending on configuration, tailored to your requirements: from €8,900 (machine only, without table, etc.) from €15,900 (complete set) plus plasma source, transport & installation We look forward to your inquiry!

Condition: good (used), Year of construction: 2006, CNC Gantry Flame Cutting Machine Manufacturer: Messer Model: Easytherm 4600 Year: 2006 Control: Global Control Working area: 3 x 9 m No table included!! A table can be offered upon request! Track length: 12 m with HEB beam 1 oxy-fuel torch ALFA 1 plasma torch with Kjellberg 160i plus power source Ijdpfx Asivz A Rjddeht Including marking unit Torit filter system In-house technicians available for installation, commissioning, and training! All spare parts in stock. 161225ä

Condition: good (used), Year of construction: 2016, CNC Portal flame cutting machine Manufacturer: Sato Type: Satronik D5765 Manufacture: 2016 Isdpegqkc Nsfx Addsht CNC control: Satocontrol CNC 3010 Track width: 5.750 mm 6 x oxyfuel torche without tracks without table without filter