Used Cnc Router for sale (3,547)

Condition: as good as new (ex-display), single phase, 1950 kg, dust extraction, vacuum table with four individually controlled sections, water cooled 6kw 24000 rpm spindle, A2 hand held controller.spindle, Chsdjhh Anrjpfx Abrjd

Condition: used, machine/vehicle number: 008739, X axis working area: 6000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Chodoz N Swispfx Abrsd Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 16 Total number of tool changer positions: 14

Condition: used, functionality: unexamined, travel distance X-axis: 2,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 130 mm, total length: 3,070 mm, table length: 2,800 mm, table width: 1,340 mm, total width: 1,800 mm, spindle speed (max.): 30,000 rpm, total height: 1,420 mm, overall weight: 500 kg, spindle motor power: 2,200 W, controller manufacturer: CNC-STEP (KinetiC-NC), number of axes: 3, Equipment: documentation/manual, We are selling our CNC portal milling machine, CNC-STEP High-Z T-Rex S-1224, with extensive equipment. The machine was purchased new in 2019 (total investment approximately €39,900 net) and is suitable for milling and engraving aluminum, plastic, and wood. Condition: The machine is generally functional. However, after being transported to its current location, it has not been fully reassembled and connected, so its functionality cannot currently be tested. An inspection is possible, but a test run under power is not. Technical data: - Travel distances: X 2,400 mm / Y 1,200 mm / Z 130 mm - Clamping area: 2,800 x 1,340 mm - Drive: 3 brushless stepper motors, ball screw spindles on all axes - Linear guides HIWIN/THK on all axes - Rapid traverse max. approx. 12,000 mm/min, working speed max. approx. 8,000 mm/min - Repeatability approx. 0.01 mm - Overall dimensions approx. 3,070 x 1,800 x 1,420 mm, weight approx. 500 kg Equipment: - High-frequency spindle Mechatron ATC-8022-30: 2.2 kW, 30,000 rpm, HSK25/ER16, pneumatic, with control cabinet and frequency inverter - 5 tool holders HSK-E-25-ER16, collet set ER16 - Tool length sensor - Vacuum table covering the entire area (MDF), 2 side channel blowers each 4 kW (high voltage) - Minimum quantity lubrication - T-slot table - KinetiC-NC control system with wireless remote control, emergency stop - Control laptop (ASUS) included - CAM software VCarve Pro - Operating manuals and wiring diagrams Without automatic tool changer. Cedpfx Abs Af Ifzerehd Notes: - Inspection possible by arrangement (not under power) - Disassembly and transport by the buyer, we will assist with the forklift during loading - Sale excludes any warranty - Invoice with VAT shown

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 200 h, power: 4.5 kW (6.12 HP), input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 1,800 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,050 mm, number of axes: 4, controller manufacturer: Syntec, total height: 3,600 mm, total length: 5,800 mm, total width: 2,440 mm, overall weight: 2,600 kg, table length: 5,400 mm, table width: 2,030 mm, For sale is a large-format, 4-axis CNC portal milling machine from Yishun, privately owned. With its enormous working area and 1050 mm Z-axis, the machine is ideal for the precise machining of large components made of foam (Ureol/Styrodur), plastics, wood, and aluminum (e.g., for mold making, boat building, or prototype construction). The machine has only been in operation for approximately 200 hours (year of manufacture 2016) and will be handed over in perfect mechanical and electrical condition. High-quality industrial components have been used throughout. Codpfxezv U Tbj Abrshd TECHNICAL DATA & COMPONENTS: • Working area (X/Y/Z): 1800 mm x 4500 mm x 1050 mm • External dimensions: approx. 5800 mm x 2440 mm x 3600 mm (L x W x H) • Weight: approx. 2600 kg • Spindle: High-quality HSD spindle • Drives: Reliable, powerful Yaskawa servo motors • Controller: Syntec controller (machine can be moved on-site) • Guides & Mechanics: HIWIN linear guides, WMH rack and pinion with precise Rouist gears on the servo motors, ball screw in the Z-axis feed • Equipment: Integrated zero-point sensor for the Z-axis. Post-processors for HSMtec are available to a limited extent. • Reference: The finely finished aluminum milling sample produced on the machine, shown in the video, is available (see photos). • Note on scope of delivery: The machine does not have an automatic tool changer, dust extraction system, or vacuum clamping table. CONDITION & HISTORY: The machine has been unused but stored dry in a hall for the past few years. To consistently prevent the onset of surface rust due to natural humidity in the winter, the steel structure was recently preventively re-primed and painted. The guides are completely free of rust and have been regularly preserved. The machine runs perfectly mechanically and electrically. IMPORTANT INFORMATION REGARDING TRANSPORT & PICK-UP: 1. Private sale: The sale is made by a private individual, excluding any liability for defects, warranty, or right of return. No VAT can be charged. Purchased as seen and tested. 2. Loading assistance on-site: A suitable forklift will be arranged and can be used free of charge for loading onto your low-bed trailer or truck. 3. Transport options: The machine is primarily intended for self-collection. Delivery within a close radius (up to 50 km) is possibly possible after prior arrangement and upon payment of costs. If transport over longer distances is an issue, we will certainly find a joint solution after prior consultation or provide assistance in finding a freight forwarder. We are open to realistic price offers. An inspection and demonstration of the axes on-site in 91183 Abenberg are welcome after prior arrangement.

Year of construction: 2020, operating hours: 414 h, condition: used, functionality: fully functional, machine/vehicle number: C-322-K7-13853, We offer this used MultiCam Celero 7 Flatbed cutter / CNC Router, year of construction 2020. Serial Number: C-322-K7-13853 Year of Manufacture: 2020 year Voltage: 380 V Phases: 3 Ph Current: 58.2 A Chodpozvvc Djfx Abred Power: 38.3 kW Frequency: 50/60 Hz Comes with HF Spindle, Two Knife modules, ATC, Depth Adjustment Sensor, Laser Pointer If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 1997, functionality: fully functional, input current: 50 A, number of axes: 3, number of slots in tool magazine: 12, total length: 5,000 mm, total width: 2,900 mm, overall weight: 4,500 kg, Equipment: CE marking, documentation/manual, CNC milling machine with a tool magazine for 12 tools, featuring a vacuum clamping system to secure the workpiece, and includes a vacuum pump. Csdpfoza U Nxex Abrshd

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 80 mm, We offer this very good Morbidelli Uniflex HP Throughfeed Borer and Router CNC, year of construction 2016. Manufacturer: Morbidelli Model: Uniflex HP Year of manufacture: 2016 Condition: very good Category ID: 2074 Type ID: 151 Machine type: Throughfeed Borer and Router CNC The Morbidelli UNIFLEX HP is a high-performance CNC drilling and routing centre designed for precision panel processing in furniture and cabinet manufacturing. It allows drilling on multiple faces of a panel and routing operations with high accuracy while minimizing setup time through automated clamping and CNC control. Key Features • 6-side panel drilling capability with upper and lower machining heads • Up to 134 independent spindles for high production throughput • RO.AX rotoaxial spindle technology ensuring zero backlash and extremely accurate drilling • Dual independent clamps eliminate machine setup time and allow simultaneous operations • Ability to process two overlapped panels simultaneously • Integrated saw blade in X-axis for panel cutting operations • Heavy-duty welded O-frame structure for maximum rigidity and precision • CNC controlled panel movement with brushless motors and ball screws • Xylog Plus 2 CNC software with PC interface Drilling System • 96 vertical drilling spindles (48 upper + 48 lower) • Horizontal drilling spindles: o 8 + 8 in X direction o 4 + 2 in Y direction • Maximum spindle speed: 6,000 rpm • Integrated X-axis saw blade: o Diameter: 125 mm o Speed: 7,500 rpm CNC Control & Software • Industrial PC with Windows operating system • 17" colour display and keyboard interface • Xylog Plus 2 programming software Cjdpfx Abjyr Uguerohd • Programming options: Parametric programming • DXF and ASCII file import support • Simulation and optimisation of drilling cycles Panel Capacity • Panel length: 250 – 3000 mm • Panel width: 70 – 1300 mm • Panel thickness: 10 – 80 mm • Maximum panel weight: 100 kg Axis Speeds • X axis: 120 m/min • Y axis: 35 m/min • Z axis: 30 m/min Machine Requirements • Compressed air: 6.5 bar • Average air consumption: 500 Nl/min • Dust extraction airflow: o Upper head: 5000 m³/h o Lower head: 2250 m³/h Additional Equipment Included • Panel length measuring device • Electrical cabinet with air conditioning • Manual loading and unloading stations with cross belts If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4.5 kW (6.12 HP), number of axes: 3, overall weight: 880 kg, table length: 2,500 mm, table width: 1,300 mm, Equipment: CE marking, documentation/manual, Universal CNC router for cutting, engraving, and 3D milling of any shape or form you need. This model can create half of the furnishings for the kitchen and living area. Easy-to-use Wattsan CNC milling machine for medium or large production which will serve you accurately. Wattsan M1 1325 planetary gears allow you to cut hard wood and soft metals easily. Also, a vacuum table can be installed so the fixation is as steady as stone. With a Wattsan milling machine, you may work with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Wattsan M1 1325 characteristics Working area: 1300x2500 mm Spindle: 4.5 kW Machine size: 2080 x 3100 x 1890 mm Weight: 690 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Csdpforywfnex Abrjhd Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 80 h, total height: 1,900 mm, total length: 4,200 mm, total width: 2,250 mm, overall weight: 2,000 kg, Very less used 3 axes CNC machine. Installed 10/2025. Available October 2026 Chodpfozvnpcox Abrjd Spindle 9kW Automatic tool changer for 8 tools, ISO30 ER32 Working area 2000x3000x260mm

Condition: used, machine/vehicle number: 008805, X axis working area: 5920 mm Y axis working area: 1660 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of drilling spindles: 28 Total number of tool changer positions: 33 Cedpfo Ad U Aisx Abrehd

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4.5 kW (6.12 HP), number of axes: 3, overall weight: 880 kg, table length: 2,500 mm, table width: 1,300 mm, Equipment: CE marking, documentation/manual, Any shape or form may be cut, engraved, or 3D milled using this universal CNC router. The Wattsan M1 6090 can create décor, furniture, advertising, and packaging. This machine is compatible with several materials, including wood, MDF, chipboard, acrylic, plexiglass, PVC, composite, and aluminum. The working table of the Wattsan M1 6090 is 600x900x200 mm. A 2.2 kW spindle and a T-slot table are part of its basic design. Compared to the A1 6090 model, the processing depth may be increased by 20% in a single pass thanks to the 300 mm portal height. Csdpervh Ebofx Abrjhd You can give our managers a call for additional details! Wattsan M1 6090 characteristics Working area: 600x900 mm Spindle: 2.2 kW Machine size: 1380 x 1500 x 1890 mm Weight: 400 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, Equipment: CE marking, IMA BIMA 410 V CNC WORKING CENTRE FOR BORING + ROUTING + EDGE BANDING • Industrial machine with heavy-duty structure • Working area: X:4000 mm Y:1200 mm Z: 100 mm • Travel speed: X:100 m/min Y:80 m/min Z: 25 m/min • 2 Working areas • 8 movable work tables to support the panels. SCHMALZ system • 23 SCHMALZ suction cups with vacuum system for the locking of the working piece • 4 loading device through pneumatic bars assembled on the work tables that lift the pieces • 1 SIEMENS vacuum pump ROUTING UNIT: • 10 HP. Refrigerated router head • Automatic change of the tool • Tool holders: HSK F-63 • C AXIS that allows to turn and 360° angle drive heads with rotation regulation in automatic by numerical control • 0 to 20.000 rpm • Tool magazine 12 positions MULTI-BORING UNIT: • 7 independent spindles for vertical boring in X direction Csdpfx Abszc E A Ierohd • 5 independent spindles for vertical boring in Y direction • High revolution speed: 9.000 rpm EDGE BANDING UNIT: • Automatic device to apply the edge into straight profiles of shaped panels • Applicable banding material in coils: thin edge and PVC up to 3 mm • Independent unit to edge band shaped panels. It's installed on the main frame of the machine - hot-melt glue pot and premelter - spreading roller to regulate the quantity of apllied glue - edge pression roller • Lamp zone to pre-heat the side of the panel • Multiple magazine for edge coils with 2 positions, to automatically change the edge type • Top and bottom edge trimming head-unit • Top and bottom edge scraping head-unit CONTROL OF THE MACHINE: • IMATRONIC • Software IMAWOP • Command board installed on a separated electrical cabinet to control the machine PROTECTION ENCLOSURE OF THE WORKING UNITS PROTECTION FENCES SECURITY CARPETS SECURITY NORME CE MARK

Condition: used, machine/vehicle number: 008550, X axis working area: 4300 mm Y axis working area: 2205 mm Working Table: Flat table Main Electrospindle power: 13 KW Codpfx Abjz Eyycjrehd Number of controlled axes: 5 axes Total number of drilling spindles: 28 Total number of tool changer positions: 16

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), number of axes: 3, total length: 2,500 mm, total width: 1,300 mm, overall weight: 1,260 kg, Equipment: CE marking, documentation/manual, Reduce retooling by 4-5 times with pneumatic auto-change and a tool height sensor! Convenience in operations. This CNC router machine can cut and engrave wood, MDF, chipboard, acrylic, plexiglass, PVC, composites, and aluminum. The Wattsan M3 1325 has an increased thickness of housing that allows it to work with heavy workpieces. It can manufacture parts for light industries, interior and exterior decorating, souvenirs, outdoor advertising, working with soft metals and stone, woodworking, and furniture production. You can give our managers a call for additional details! Wattsan M3 1325 characteristics Working area: 1300x2500 mm Positioning precision: 0.03 mm Spindle: 7.5 kW Machine size: 1960x3350x1740 Weight: 830 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. Chedorywtqspfx Abred YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 2013, condition: used, 2013 Neway GVM 850 H CNC Machining Center with Fanuc 0i-MD Controller X / Y / Z Axis Travel: 850 mm × 520 mm × 560 mm. Table Dimensions: 950 mm × 520 mm. Distance spindle to table: 150-710 mm. Maximum Table Load: 600 kg. Spindle Taper: BT40. Spindle Speed: 8,000 RPM. Spindle Motor Power: 7.5 kW continuous / 11 kW peak. Control System: Fanuc 0i-MD. Tool Magazine (ATC): 24-station arm-type. Rapid Traverse (X/Y): 30 m/min. Rapid Traverse (Z): 24 m/min. Note: Machine located in 32-640 Zator, Poland. Chjdpfx Abj Ahq Dmorod Machine dimensions: 3672 x 2414 x 3000 mm. Machine Weight: 6,000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4.5 kW (6.12 HP), number of axes: 3, overall weight: 730 kg, table length: 1,600 mm, table width: 1,600 mm, Equipment: CE marking, documentation/manual, This is a medium-sized CNC router designed for cutting, engraving, and 3D milling. It can work with plywood, wood, MDF, chipboard, plexiglass, plastic, soft metal, and aluminum. Equipment for effective work operates at all hours of the day and night. The Wattsan M1 1616 has a 4.5 kW spindle as standard. The machine has a working table of 1600x1600x200 mm. Its gantry has increased rigidity and allows the use of 1 to 12 spindles. Heavy workpieces can be operated thanks to that as well. You can give our managers a call for additional details! Wattsan M1 1616 characteristics Working area: 1600x1600 mm Spindle: 4.5 kW Machine size: 2300x2140x1780 mm Weight: 590 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Cedpjrywhuofx Abrohd Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2026, PREMIUM models feature high rigidity and maximum resolution precision, operating in full interpolation across the X, Y, and Z axes. A high-quality CNC milling router designed for subtractive machining, suitable for numerous industries such as industrial, electronic, welding, woodworking, and advertising. These are efficient and precise machines equipped with user-friendly CNC control systems. Optionally – latest UCanCAM V13 software. Technical parameters Spindle 5.5kW / 18,000 rpm inverter, air-cooled Working area 1500x3000 mm Maximum spindle height 350 mm Control DSP Software resolution 0.001 mm Power supply 400V Weight 1380 kg Machine dimensions 2450 x 3800 x 2200 mm Table height 715 mm Vacuum pump 5.5 kW (optional) Vacuum pressure 440 mbar Guideways linear Drive transmission rack and pinion (Z axis – ball screw) Axis drives hybrid servo drives Software UCanCAM V13 (option) Equipment Air-cooled spindle, PREMIUM version Hybrid servo drives Raised Z-axis gantry – 350 mm Vacuum table – 4 independent vacuum zones + T-slot table for manual fixing Tool height sensor included Tool set, collets, levelling feet, and accessories DSP control – digital signal processing Starter milling cutter set Unloading and machine placement are the customer’s responsibility. Power plug on the customer’s side due to various 16A / 32A sockets. On-site commissioning of CNC routers available upon request, with individual pricing. Chjdpfx Asycupwobred

Condition: new, Year of construction: 2026, functionality: fully functional, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 2,900 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 2,800 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 300 mm, number of axes: 3, number of slots in tool magazine: 12, actuation type: electric, total height: 2,275 mm, total length: 4,060 mm, total width: 3,315 mm, overall weight: 1,700 kg, Equipment: documentation/manual, The 2128 PANA ATC is a next-generation DANIBRUM CNC router, designed for modern workshops and manufacturing facilities seeking high productivity, consistent precision, and efficient automation in a single, fully integrated machine. Equipped with a 12-position automatic tool changer (ATC) and ISO30 tool holder system, the machine offers rapid tool changes and extended flexibility for processing a wide variety of materials: particle board, MDF, solid wood, plastics, Alucobond, and composites. The robust machine frame is supported by 25 mm linear guides, helical rack and pinion drives M1.25, and 750 W servo motors, ensuring fast, smooth movements and precise positioning across all axes. The 9 kW air-cooled electrospindle, with speeds up to 18,000 rpm, is controlled by an 11 kW inverter, allowing fine speed adjustment and stable performance under load. Cedoymcncepfx Abrehd The result is a reliable, fast, and versatile CNC router, tailored to the current demands of furniture production and industrial processing.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4.5 kW (6.12 HP), table width: 1,300 mm, table length: 2,500 mm, overall weight: 790 kg, number of axes: 3, Equipment: CE marking, documentation/manual, This is a CNC router that has 4 spindles operating simultaneously and can change automatically! That increases the effectiveness of the production, making it 4 times faster. Chodpfsr D Ntfjx Abrjd That CNC milling machine is perfect for big production of facades, doors, windows, casing moldings, etc. Wattsan M1 1325 planetary gears allow you to cut hardwoods and soft metals easily. Also, a vacuum table can be installed so the fixation is as steady as stone. With a Wattsan milling machine, you may work with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Wattsan M1 1325 S4 machine characteristics: Working area: 1300x2500 mm Spindle: 6 kW Machine size: 2000 x 3040 x 1780 mm Weight: 1000 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 3.2 kW (4.35 HP), number of axes: 3, table length: 2,500 mm, table width: 1,300 mm, Equipment: CE marking, documentation/manual, Universal CNC router for cutting, engraving, and 3D milling of any shape or form you need. Easy-to-use Wattsan CNC milling machine for medium or large production which will serve you accurately. It works with metal, wood, plastic, foam rubber, aluminum, and plexiglass. Wattsan A1 1325 has a T-slot table that allows you to secure items using bolts, clamps, or a mechanical holdback. This router is equipped with two-phase stepper motors, allowing for better movement along the X, Y, and Z axes. With a Wattsan milling machine, you may make doors, tables, seats, machine components, and other items. You can give our managers a call for additional details! Wattsan A1 1325 characteristics Working area: 1300x2500 mm Chsdpfx Aboryv Dbsrod Spindle: 3 kW Machine size: 1960 x 3100 x 1662 mm Weight: 630 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, machine/vehicle number: 008481, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of drilling spindles: 22 Total number of tool changer positions: 36 Chjdpfxjy Edpmj Abrod

Condition: used, machine/vehicle number: 008694, X axis working area: 4320 mm Y axis working area: 1287 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Chodpfx Ajzqz Nxebrod Number of controlled axes: 5 axes Total number of drilling spindles: 16 Total number of tool changer positions: 31

Condition: used, machine/vehicle number: 008112, X axis working area: 3390 mm Y axis working area: 1535 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Total number of drilling spindles: 21 Chjdpjw Idgvsfx Abrsd Total number of tool changer positions: 14

Condition: used, machine/vehicle number: 008340, X axis working area: 4400 mm Y axis working area: 1300 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of drilling spindles: 36 Total number of tool changer positions: 30 Chsdpfxey Nkpnj Abrjd

Condition: used, machine/vehicle number: 008496, X axis working area: 5920 mm Y axis working area: 1600 mm Csdsy H Dzfepfx Abrjhd Working Table: Pod and Rail Main Electrospindle power: 16.5 KW Number of controlled axes: 5 axes Total number of drilling spindles: 23 Total number of tool changer positions: 34