Used Kitamura Double Column for sale (14)

Condition: used, Standard Machine Specifications Table: Working surface: 305 x 305 mm Max. workpiece capacity: Ø 500 mm x 560 mm Max. table load: 250 kg Travel: X-axis: 510 mm Y-axis: 510 mm Z-axis: 490 mm Axis: 0.001° – 360° Distance from table top edge to spindle center: 40 - 550 mm Distance from table center to spindle nose: 100 - 590 mm Spindle: Spindle taper: NST No. 40 Speed: 20 – 20,000 rpm Drive: 4-stage gearbox (2 mechanical, 2 electric) Max. torque: 157 Nm Feed: Rapid traverse X, Y, Z-axis: 50,000 mm/min Rapid traverse 4th axis: 9,000°/min 90° rotation of the 4th axis: 0.6 seconds Cutting feed rate X-, Y-, Z-axes: 40,000 mm/min Tools: Tool positions: 40 Tool selection method: direct control, bidirectional Tool holder: BT (SK) 40 Max. tool diameter: 95 mm (150 mm if adjacent positions are empty) Kodpfxev Si Sus Addodg Max. tool length: 300 mm Max. tool weight: 10 kg Tool change time (tool-to-tool): 1.7 seconds Tool change time (chip-to-chip): 5.0 seconds Motors: Spindle motor (30 min./continuous operation): 11.0 kW AC Tool changer motor: 400 W AC Cooling system motor: 1,200 W AC Pallet: Pallet change time: 6.0 seconds Other: Power supply: 25 KVA, 200 V AC, 3 phases Air supply: 5 bar, 330 l/min Dimensions: Machine height: 2,940 mm max. Footprint with chip conveyor: 3,492 mm x 3,173 mm Weight: 9,900 kg Control system: Fanuc 16iMB Standard machine accessories Spindle with 20,000 rpm and 4-speed gearbox (2-speed gear drive, 2-speed electronic gearbox) 2 spindle bearing compensation within 0.005 mm (IAC system 1) Big Plus spindle (contact in the taper and on the Front face) Automatic spindle cleaning with compressed air Coolant through spindle at 15 bar and its own pump Spindle bearing lubrication system (air-oil mixture) Spindle cooler Automatic lubrication of the X, Y, and Z axes Automatic high-speed tool changer with 40 tool stations Fixed tool location: each tool is coded independently of the machine and identified in the magazine Original Kitamura tool hold function through T-code pre-selection Automatic pallet changer, 180° reciprocating (2 stations) Coolant pump 1,200 W Double-deck chip conveyor with 2 chip conveyor belts for coarse and small chips, with filter system Chip flushing at the bottom with a separate 1,200 W pump Fully enclosed Enclosure Automatic central lubrication of the guideways Air FRL unit (filter, regulator, lubrication) Hydraulic power unit with tank Work light End of cycle lamp Compensating thread cutting 4 free M functions, M20 – M23 Pivoting control panel Portable handwheel RS 232C interface PCMCIA interface Door lock Emergency stop switch on the tool magazine Manual indexing switches on the tool magazine Self-diagnosis function

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Standard Specifications of the Machine Table: Working area: 305 x 305 mm Max. workpiece volume: Ø 500 mm x 560 mm Max. table load: 250 kg Travel: X-axis: 510 mm Y-axis: 510 mm Z-axis: 490 mm Rotary axis: 0.001° – 360° Distance table top – spindle center: 40 - 550 mm Distance table center – spindle nose: 100 - 590 mm Spindle: Spindle taper: NST No. 40 Spindle speed: 20 – 20,000 rpm Drive: 4-step gearbox (2 mechanical, 2 electric) Max. torque: 157 Nm Feed: Rapid traverse X, Y, Z-axis: 50,000 mm/min Rapid traverse 4th axis: 9,000°/min 90° rotation of 4th axis: 0.6 seconds Cutting feed X, Y, Z-axis: 40,000 mm/min Tools: Tool positions: 40 Tool selection: direct, bi-directional Tool holder: BT (SK) 40 Max. tool diameter: 95 mm (150 mm if adjacent positions are empty) Max. tool length: 300 mm Max. tool weight: 10 kg Tool change time (tool-to-tool): 1.7 seconds Tool change time (chip-to-chip): 5.0 seconds Motors: Spindle motor (30 min./continuous operation): 11.0 kW AC Tool changer motor: 400 W AC Coolant system motor: 1,200 W AC Pallet: Pallet change time: 6.0 seconds Other: Power supply: 25 kVA, 200V AC, 3-phase Air supply: 5 bar, 330 l/min Dimensions: Machine height: 2,940 mm max. Footprint with chip conveyor: 3,492 mm x 3,173 mm Weight: 9,900 kg Control: Fanuc 16iMB Standard Accessories Spindle with 20,000 rpm and 4-step gearbox (2-speed gear drive, 2-speed electronic gear) 2-Point spindle bearing compensation within 0.005 mm (IAC System 1) Big-Plus spindle (contact in taper and face) Automatic spindle taper cleaning with compressed air Through-spindle coolant at 15 bar with separate pump Spindle bearing lubrication system (air-oil mixture) Spindle cooler Automatic lubrication of axis ballscrews in X, Y, and Z axes Automatic high-speed tool changer with 40 tool stations Fixed tool position: each tool is independently coded by the machine and identified in the magazine Original Kitamura tool wait-release function via pre-selection of the T-code Automatic 180° pallet changer (2 stations) Coolant pump 1,200 W Double-deck chip conveyor with 2 chip belts for coarse and fine chips, with filter system Lower chip flushing with separate 1,200 W pump Fully enclosed guard Automatic central lubrication of guideways Air FRL unit (filter, regulator, lubrication) Hydraulic power unit with tank Work light Cycle end lamp Tapping without compensating chuck 4 free M-functions, M20 – M23 Swiveling control panel Portable handwheel RS 232C interface PCMCIA interface Kdedow Al Tbjpfx Addeg Door interlock Emergency stop at tool magazine Manual index switches at tool magazine Self-diagnostic function

Condition: excellent (used), Kitamura HX630i Horizontal Machining Center Year of manufacture: 2010 Control: Fanuc 16i-MB Travel paths: X: 1000 mm Y: 800 mm Z: 820 mm Kedpfx Adjxx Drxodjdg B axis: 0.001° Table size: 630 mm x 630 mm Spindle: 12,000 rpm Tool changer: 50 positions Tool holder: BT50 The machine is in very well-maintained condition.

Condition: ready for operation (used), Year of construction: 2005, Main Drive Number of axis 3 Movement X-Axis Movement 760 mm X-Axis Rapid Traverse 50 m/min Y-Axis Movement 455 mm Y-Axis Rapid Traverse 50 m/min Z-Axis Movement 460 mm Z-Axis Rapid Traverse 36 m/min Kdodpfxjx D Rc Ie Addeg Table Table load 200 kg This 3-axis Kitamura 3XiF was manufactured in 2005. It features a robust FANUC 16i-MB control system, a spindle speed of 10,000 rpm, and a BT-40 taper. The machine includes a chip conveyor with an extended neck and a 30-tool changer. Table size is 900 x 410 mm, supporting up to 200 kg. Ideal for precision machining with internal spindle cooling available. Contact us for more information about this machine. Application Types Milling

Condition: used, Horizontal Machining Center Kitamura HX500G Main Technical specifications: Spindle Max. Speed: 12000 RPM Max. diameter of tools: 125mm Kedpfxom E Ttbs Addjdg Max. weight of tools: 20 kg Table work area: 630x630mm Max. work size: 1000x1000mm Table load capacity: 1200kg X-axis: 1050 mm Y-axis: 850 mm Z axis: 900 mm Spindle nose to table distance: 130 - 1030 mm Available. Fast delivery

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 40543, travel distance X-axis: 425 mm, travel distance Y-axis: 425 mm, travel distance Z-axis: 400 mm, overall weight: 8,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 100, TECHNICAL DETAILS Kdjdpfx Aoxnwkgsddjg X-axis: 425 mm Y-axis: 425 mm Z-axis: 400 mm Pallet size: 300 x 300 mm Feed Rates Rapid traverse: 36,000 mm/min Cutting feed rate: 0–10,000 mm/min Tool Magazine Capacity: 100 ATC Spindle speed: 10,000 rpm Tool diameter: 95 mm Maximum tool length: 350 mm Maximum tool weight: 10 kg Max. tool weight (with tool holder): 10 kg Tool change time: 1.7 s Chip-to-chip time: min. 7 s Control: Fanuc 15M Pallet indexing: Full 4th axis MACHINE DETAILS Installation dimensions: approx. 3,690 x 4,614 x 2,475 mm Transport dimensions of the machine: 2.4 x 3.80 x 2.8 m Connected load: 20 kVA Phases: 3 Frequency: 50/60 Hz EQUIPMENT - Chip conveyor - Through-spindle coolant Note: The robot is equipped with 40 pallets. Spare pallets are also available.

Condition: repair required (used), Year of construction: 2003, operating hours: 926 h, functionality: limited functionality, travel distance X-axis: 760 mm, travel distance Y-axis: 455 mm, travel distance Z-axis: 460 mm, controller manufacturer: Fanuc, controller model: 16iM, table width: 410 mm, table height: 900 mm, rotational speed (max.): 15,000 rpm, We are selling our Kitamura numerically controlled machining center, model MY-3Xi, with FANUC 16iM CNC control system. The machine is out of operation; tool changer must be referenced. Year of manufacture: 2003 Travel: 760x455x460mm Tool magazine positions: 30 Spindle speed: 15,000 rpm Spindle taper: (BIC-PLUS) ISO/BT40 2-stage gearbox Table size: 410x900mm Control on-time: 38,746 h Milling time: 926 h Remarks: - The price does NOT include any accessories! - Pickup by the buyer, ex works. - Pickup date to be arranged with the seller. Kdsdpfexzqguox Addog - No warranty - Advance payment (invoice) or cash payment on collection

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand FANUC Model 16 i MB Movement X-Axis Rapid Traverse 50 m/min Y-Axis Rapid Traverse 50 m/min Z-Axis Rapid Traverse 50 m/min X-Axis Movement 735 mm Y-Axis Movement 610 mm Z-Axis Movement 610 mm This Kitamura HX500 ia was manufactured in 2008. It features X-Y-Z Axis Travels of 735, 610, and 610 mm, a table size of 500x500 mm, and a spindle speed of 13,000 rpm. The machine includes a BT40 spindle mount, a 50-position tool changer, and a FANUC 16 i MB control system with a 10.4" color LCD. Consider the opportunity to buy this Kitamura HX500 ia horizontal machining centre. Contact us for more information about this machine. Kdjdpfex D Ntxsx Addeg Application Types Milling

Condition: excellent (used), Year of construction: 2001, spindle speed (max.): 10,000 rpm, Vices are not included in the scope of delivery! Kdjdpfx Adsxb Dyhedeg

Condition: good (used), Year of construction: 2005, KITAMURA CNC MYCENTAR 5 YEAR OF CONSTRUCTION 2005 CHANGING TABLE X-travel 1200 mm Y-travel 560 mm Kdsdpfsu Sznpox Addsg Z travels 560 mm Type Vertical CNC FANUC 16MA Table length 1200 mm table width 500 mm Tool changer 30 Spindle cone BT 40 Max. Spindle speeds 10000 rpm Weigth 11,000 kg Machine length 6.007 mm Machine width 2,830 mm Machine height 3.305 mm

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 735 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: FANUC 16iM, spindle speed (max.): 13,000 rpm, The machine is available from 01.10! TECHNICAL DETAILS Kdodpfxew Euc Rs Addeg Travels Travel X: 735 mm Travel Y: 610 mm Travel Z: 610 mm Workpiece Table size Length: 400 mm Table size Width: 400 mm Workpiece weight: max. 400 kg Spindle and Tool Tool changer: 50 stations Spindle taper: BT 40 Spindle speed: max. 13,000 rpm Spindle motor power: 22 kW CNC control: FANUC 16iM MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 3,987.8 mm x 2,232.7 mm x 2,893.1 mm Machine weight: 15,000 kg

Condition: ready for operation (used), Positioning accuracy: +/-0.003mm, repeat accuracy: +/-0.001mm, spindle speed: 15000rpm, rapid traverse X/Y/Z: 50m/min/50m/min/36m/min, spindle power: 7.5kW, table dimensions X/Y: 355mm/786mm, max. table load: 240kg, max. tool diameter: 70mm, max. tool weight: 2kg. Machine dimensions X/Y/Z: approx. 2400mm/2100mm/2650mm, machine weight: approx. 3700kg. Documentation available. On-site inspection is possible. Ksdpfeu Tuwmjx Addedg

Year of construction: 2018, condition: ready for operation (used), Travel X/Y/Z: 460mm/510mm/560mm, table dimensions X/Y: 305mm/305mm, speed: 15000rpm, power: 22kW, tool positions: 50, tool diameter: 95mm, tool weight: 10kg, max. workpiece diameter: 500mm, max. workpiece height: 745mm. Rapid traverse: 60m/min, B-axis speed: 150rpm, positioning accuracy: +/-0.001mm, power consumption: 45kVA, control: Arumatik. Documentation available. On-site inspection is possible. Kjdpfov H Dg Nox Addedg

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 81362, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Fanuc 18i-MB, total height: 3,300 mm, total length: 2,030 mm, total width: 2,300 mm, table width: 250 mm, table length: 250 mm, overall weight: 4,600 kg, spindle speed (max.): 15,000 rpm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Kitamura Mycenter HX250iF, year 2011 Serial No.: 81362 - CNC control unit: Fanuc 18i-MB - Spindle power: 11.2 kW - Spindle speed: 15,000 rpm - Axis travels X/Y/Z: 305 / 305 / 330 mm - Rapid traverse (X/Y/Z): 48 m/min - Number of tool stations: 40 - Tool holder type: BT30 - Tool change time: 1.2 s - Pallet size: 250 x 250 mm - Number of pallets: 2 - Maximum pallet load: 110 kg - Distance table center/spindle nose: 380 mm - Machine dimensions: 3,300 x 2,030 × 2,300 mm - Machine weight: 4,600 kg Equipment Kodpfx Adexur E Sededg - Handheld remote control - 3-color status signal tower - Coolant tank with high-pressure pump - Oil mist extractor - Chip conveyor - Spindle chiller unit - Renishaw 3D probe - Renishaw tool measurement - Transformer - Approx. 150 tool holders