Used Cnc Tube Bender for sale (11,231)

Condition: good (used), Year of construction: 2013, Ref. -No.: 10718 Manufacturer: REIDEN Type: RX 10 Year of construction: 2013 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Schweiz Machine-No.: 40-xxx Turning Speeds: 16.000 RPM X stroke: 1.000 mm Y stroke: 1.100 mm Z - stroke: 810 mm C-Axis: 360° Spindle power: 38 kW Fodpfxs Ahw Sio Aanjgi Tool Taper: HSK 63 Max. Rapid traverse: 60 m / min Further information: The machine is offered including all available accessories and technical documentation. The machine has been cleaned, is fully operational and can be inspected under power by prior appointment.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10649 Manufacturer: JUARISTI Type: TX1D Year of construction: 2008 Type of control: CNC Control: Heidenhain TNC 530 Storage location: Halberstadt Country of origin: Spain X-Travel: 4000 mm Y-Travel: 2500 mm Z-Travel: 2000 mm B-Axis: 360 ° C-Axis: 0,005 ° Rotary Table (Lxw): 1600 x 3000 mm Table Load: 4000 kg Tool Taper: SK50 Numbers Of Tools In Magazin: 100 Spindle Speed: 3500 RPM Drive Capacity - Spindle Motor: 25 kW Further information: - Weight limit for milling ⁓ 4000 kg - X-axis with rotary table and swivel head - 3 indexing tables, approx. 200 - Internal coolant supply (IKZ) is standard - Welding stand capable of welding and powder coating up to 6.3 t and 10 m in length with a 2 x 2.5 m cross-section Fsdpfxj Ahw N So Aanogi The machine can be viewed while powered on by prior arrangement.

Condition: used, Year of construction: 2021, turning diameter 42/200 mm turning length 430 mm control Fanuc 3li-B clamping chuck diameter 165 mm turret (x-stations) 2x12 travel -y axis 70 mm range L-W-H 2645 x 1645 x 1900 mm total power requirement 11/7,5 kW turning speeds 6000 U/min gripping station 42/200 mm load magazine Breuning IRCO SIMag chip conveyor Knoll kW coolant filtering unit Knoll kW total power requirement 11/7,5 kW weight of the machine ca. 6250 kg Feds Ah T Ulepfx Aansgi CNC Turning & Milling machine Miyano ANX 42 SYY

Condition: excellent (used), Year of construction: 2004, INDEX C65 turning and milling center + Kompaktbandfilter micro-filtration unit, year 2004. 3 x 12 tools (turret type) 200 H + 300 cm conveyor belt - FMB Turbo 10-72XT, year 2005, Fodpfxo Ah Hzbj Aansgi With its tool cabinet and contents.

Condition: used, functionality: fully functional, Machine Data • Gantry-type machine with fixed table and moving portal for minimal footprint • Base frame, bridge, and bridge uprights made from welded, stress-relieved, and machined steel in one piece • Main machine assemblies consist of ribbed welded constructions engineered for optimal stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading via forklift or overhead crane • Ground precision linear guides with high pre-load and additional cover tape for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-side synchronised drive on the X-axis (gantry drive) • Rack-and-pinion drive on the X and Y axes • Precision ball screw drives with dual-end bearing units on the Z axis • Precision planetary gearboxes with low backlash • Enclosed cable drag chains protect the drag chain cabling against chips and dust • High-quality shielded drag chain cables offer maximum protection against interference and failures Fjdsx E Tmbopfx Aanegi • X-axis travel: 3,120 mm • Y-axis travel: 2,190 mm • Z-axis clearance: 200 mm • Z-axis stroke: 280 mm • Network connectivity via Ethernet • Remote service via Internet Panel-Based CNC Control System • Touchscreen display • Multifunction keyboard with integrated touchpad • Integrated industrial PC with Windows 7 Professional, hard drive, and Ethernet • Comprehensive remote maintenance functionalities • Includes hand-held unit with electronic handwheel • MCP with rotary switch for feed and spindle override • Mobile control cabinet Hand-held Operating Device • Fast, increment-precise positioning • Handwheel with magnetic detent • Coarse, medium, and fine positioning • 2-channel emergency stop • Protection class IP65 Milling Spindle • Max. spindle power: 4 kW • Max. speed: 30,000 rpm • ISO-25 tool taper • Max. tool diameter (shank): 12 mm • Air-cooled • Pneumatic tool taper clamping • Dry, clean, oil-free compressed air required on customer side (< 0.1 μm, < 7 bar) Automatic Tool Changer / Linear • Linear tool magazine mounted outside the working area • Basic configuration: 4 slots • Up to 20 slots ISO-25 Extraction Unit for Automatic Tool Change • Hose connection diameter: 110 mm • Automatic up/down function for tool change Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Measuring accuracy: 0.001 mm • Contact force: 1.5 N Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Sensor mounted outside the working area 2x Side Channel Blowers • Max. power consumption: 7.5 kW • Maximum airflow: 650 m³/h • Rated voltage: 400 V • Rated current: 14 A • Pressure: 39,500 Pa

Condition: used, functionality: fully functional, Machine Data • Gantry system with fixed table and moving portal for minimal footprint • Base, bridge, and bridge columns made from steel, welded in one piece, stress-relieved and machined • Main machine assemblies are ribbed welded constructions, optimized for the best stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized via finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading with forklift or overhead crane Fgodpfxjx E Ttbj Aanoi • Ground precision linear guides with high preload and additional cover bands for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-sided, synchronized drive on the X-axis (gantry drive) • Rack and pinion drive on X and Y axes • Precision ball screws with double pillow block support on the Z-axis • Precision planetary gearboxes with low backlash • Fully enclosed cable drag chains protect cable harnesses from chips and dust • High-quality shielded cable drag chain wiring ensures superior protection against faults and failures • X-axis working area: 1,540 mm • Y-axis working area: 1,540 mm • Z-axis clearance: 150 mm • Z-axis travel: 200 mm • Network connection via Ethernet • Remote maintenance via Internet FlexiCAM Control • DIN-ISO 66025 G-code compatible • Includes TCP/IP network interface • 256 MB RAM • Simple operation via handheld control unit with display Spindle with Manual Tool Change • Power consumption: 2.2 kW • 5,000–24,000 rpm, steplessly programmable • Cooling by integrated electric fan Extraction System for Manual Tool Change • Hose connection diameter: 80–90 mm FlexiCAM Midrange Vacuum Table (Side Channel Blower) • T-slot profiles, individual ball valves, 6 zones • Side channel blower: 7.5 / 9 kW • Approx. 558 m³/h (50 Hz) or 654 m³/h (60 Hz) Safety Devices • CE-compliant to DIN EN 13849 • Includes EMC filter, emergency stop • Light barrier system controlled by machine controller

Condition: used, total height: 2,000 mm, total width: 1,300 mm, total length: 5,900 mm, Year of manufacture: 1990 Colour: Green Empty weight: 7.500 kg Center-height: 250mm Table-length: 2300mm Travel grinding-spindel: 200mm Gear diameter: 300 mm Module range: 0.5 mm – 8 mm Helix angle: ±35° Max. workpiece weight: 100 kg - Year: 1990 - Serial number: 018.0402 - Drive system: CNC Fgedpfxszy E Tas Aansi - Horizontal/vertical: Horizontal - Min. module [mm]: 0.5 - Max. module [mm]: 8 - Max. workpiece width [mm]: 2300 - Max. workpiece height [mm]: 500 - Max. workpiece weight [kg]: 100 - Table length [mm]: 2300 - Transport dimensions: 5900mm x 1300mm x 2000mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2014, workpiece weight (max.): 25,000 kg, total length: 10,000 mm, total height: 6,000 mm, total width: 10,000 mm, overall weight: 60,000 kg, DÖRRIES SCHARMANN VCE 3000 / 280 CNC Vertical Turning Machine Modernization: as part of the retrofit in 2014 to Siemens SINUMERIK 840D SL Working Area Table Diameter: 2,800 mm Max. Swing Diameter / Turning Diameter: 3,000 mm Max. Table Load: 25,000 kg Max. Turning Height: approx. 2,100 mm Fgedpfx Aaezmkzpensi X-Axis Travel: ±1,550 mm Z-Axis Travel / RAM Stroke: 1,500 mm Main Drive and Spindles Main Drive: Siemens main motor Drive Power: 130 kW Max. Spindle Speed: 4,500 min⁻¹ Operating Mode: S6, 40% Equipment: 2 vertical spindles Tool Changer and Peripherals o    2 automatic tool changers o    Coolant system o    Chip conveyor o    Oil mist extraction o    2 separate hydraulic units Operating Hours: approx. 12,571 hours according to mechanical hour meter Rotation height max.: 2,100 mm Weight approx.: 60,000 kg Dimensions (LxWxH) approx.: 10000 x 10000 x 6000 mm Table diameter: 2,800 mm Control: Siemens SINUMERIK 840D SL Component weight max.: 25,000 kg Swing: 3,000 mm Year of construction: 2,014 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No

Condition: good (used), Year of construction: 1999, For sale is a horizontal machining center from Axa of the Vario type with 2 milling tables. The machine is in good condition and has done little "heavy machining" (was mainly used for drilling and thread cutting). Technical data: Year of manufacture 1999 Control: Heidenhain TNC 410 M digital Table dimensions 2030 mm *500 mm Maximum table load (evenly distributed) 800 kg Min. speed 30 1/min Max. speed 10.000 1/min Drill length on X-axis (mechanical feed) 1760 mm Drill length on Y-axis (mechanical feed) 500 mm Drill length Z-axis (mechanical feed) 620 mm Machine dimensions: Height: 3900 mm Length: 2900 mm Width: 3000 mm Weight: 9 tons SCOPE OF DELIVERY/EQUIPMENT 1 spindle version SK 40 DIN 69 871 A 1 switch cabinet (integrated in the rear of the machine) Ball screws: Made by Deutsche Star Central lubrication unit: Bielomatik Hydraulic unit: Hydac RTA 2-300 MK-3 tailstock manually operated Electric handwheel HR 410 Scraper belt conveyor discharge side right Measuring probe TS 630 WORKPIECE HOLDERS NOT INCLUDED IN THE OFFER Fgsdott Abmspfx Aanji Prices plus value added tax Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 1997, functionality: fully functional, turning diameter over cross slide: 450 mm, turning length: 420 mm, turning diameter: 350 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 420 mm, overall weight: 3,500 kg, KEGAI TUR-15 Manufacturer: Ikegai Model: TUR-15 Machine Type: CNC Turning Center Year: 1997 CNC Control: Fanuc Series 18-T Drives: Fanuc Alpha Series Number of Axes: 2 Swing Over Bed: Approx. 450 mm Maximum Turning Diameter: Approx. 350 mm Maximum Turning Length: Approx. 410–420 mm X-Axis Travel: Approx. 170–200 mm Z-Axis Travel: Approx. 420 mm Chuck: 8" Hydraulic Chuck Spindle Nose: A2-6 Fsdpfezvmytsx Aanjgi Spindle Bore: Approx. 57–61 mm Bar Capacity: Approx. 45–51 mm Spindle Speed: Up to 4,000 rpm Spindle Motor Power: Approx. 11 kW / 15 HP Turret Capacity: 12 Stations Tailstock: Included Chip Conveyor: Included Machine Dimensions: Approx. 2,440 × 1,470 × 1,575 mm Machine Weight: Approx. 3,300–3,700 kg

Condition: used, Year of construction: 2006, spindle bore: 65 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, NC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm Fgsdpe Aawrljfx Aansi W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, total width: 1,990 mm, total length: 4,500 mm, total height: 2,300 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, overall weight: 9,000 kg, Gildemeister Sprint 65 Linear - CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Technical details: Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min Fsdpo Aawvwefx Aanegi X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2010, control type: CNC control, controller manufacturer: Beckof, number of rollers: 4, roller (bottom) diameter: 1,450 mm, roller (top) diameter: 1,500 mm, side roll diameter: 1,100 mm, sheet thickness (max.): 300 mm, overall weight: 819,000 kg, total length: 15,000 mm, total width: 7,200 mm, total height: 7,800 mm, 4 roll plate bender HAEUSLER - VRM-HY 4000/300 MACH-ID 9871 Make: HAEUSLER Type: VRM-HY 4000/300 Control: BECKHOF YOP: 2010 Minimum mending diameter 1720 mm Distance Top to Lower roll 300 mm Pressing force Lower to upper roll 7200 Ton Roll quality 60CrMoV 12.5 with strength 900-1050 Nm/mm2 Controll panel with Bend-iT (Beckhoff) Largest machine build ever by haeusler (1 off 2 in World) Rolling CANS, VESSELS, BOILERS Components for SMR / AMR steam drums, high-pressure systems Small Modular Reactors and Advanced Modular reactors Power generation sector ; Offshore Market Fsdpfs Ad Uccex Aanjgi Rolling width: 4000mm Rolling thickness 3x toproll Ø:250mm Rolling thickness 5x toproll Ø:300mm Rolling thickness prebending: 270mm Top Roll Ø: 1500mm Bottom Roll Ø: 1450mm Side roll Ø: 1100mm Number of rolls: 4 Rolling speed: 1,2 + 2,4 + 3,6 M/Min Number of driven rolls: 2 Power: 700kW Length: 15000mm Width: 7200mm Height: 7800mm Weight: 819000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2007, functionality: fully functional, HWACHEON HI TECH 200 B FANUC CONTROL MAX TURNING DIA 350 MM MAX TURNING LENGHT 400 250 MM HYD 3 JAW CHUCK TAILSTOCK Fjdpfx Aaoz N Dflonegi SLOTTED TURRET YEAR 2007 TOOL SETTER

Condition: new, pressure 320 t chamfer lenght 3100 mm distance between columns 2600 mm work stroke 310 mm dayligth 525 mm column arm 510 mm ram stroke speed 140 mm/sec work speed 8.0 mm/sec return speed 130 mm/sec table height 900 mm oil volume 290 ltr. voltage 400 Volt weight 16500 kg range L-W-H 4550 x 2450 x 3200 mm ----- CNC "C" SERIES electro-hydraulic press brake featuring: * Increased daylight (open height) * Extended cylinder stroke * Increased throat depth * Long-type "full machine cover" Fgsdpfs Afzvfex Aanji ----- Equipment: - DELEM CNC control, model "DA-69T," with touchscreen/graphics * 2D and 3D graphical programming via touchscreen * Three-dimensional visualization, including a representation of the machine . during simulation and production * 24-inch high-resolution TFT color display * Compatibility with the Delem "Modusys" system for flexible expansion and . customization of control modules * USB port and interfaces for external peripheral devices * Support for custom, application-specific software . * Control system with multitasking environment * Interface for sensor-supported bending and automatic corrections * Profile-S3D offline programming software * Swiveling touchscreen control unit, positioned at the front left - CNC-controlled axes: Y1, Y2, X, R, Z1, and Z2, plus CNC-controlled crowning - CNC-controlled, motorized backgauge * Travel range: X-axis 750 mm // R-axis 250 mm * Travel speed: X-axis 500-600 mm/s // R-axis 200 mm/s * Equipped with recirculating ball screws * CNC-controlled, motorized backgauge fingers (Z1 + Z2) - Sectionalized "gooseneck" (swan-neck) upper tool: ROLLERI 135.85.R08, "System A" * Includes quick-change clamping system * Includes integrated crowning system within the tool holder - Sectionalized 4-V universal die (60x60 mm) - Rear safety system: light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety system at the front of the machine (including FMSC) - 2x front support arms with a sliding system (HIWIN linear bearings) - 1x mobile dual-pedal foot control - CE marking / Declaration of Conformity - Operating manual, including electrical and hydraulic schematics * Image shows a machine of nearly identical design

Condition: new, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm down holder 16 Stück no. of strokes 9 - 17 Hub/min cutting angle 0.5 - 2.5 ° throat 150 mm table height 830 mm oil volume 250 ltr. weight of the machine ca. 11.000 kg range L-W-H 4150 x 2350 x 2450 mm ----- Robust electro-hydraulic CNC guillotine shear with "swing-beam" Fgsdpfxe Afzu Ij Aanji * Includes CYBELEC CNC touch-screen control system * Includes CNC electro-hydraulic blade-gap adjustment * Includes CNC electro-hydraulic cutting-angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with "swing-beam" - Includes CYBELEC CNC touch-screen controller, model "CybTouch 8" - Selected CNC control functions: * Backgauge positioning (X-axis) * Blade-gap adjustment * Piece counting * Cutting-length limitation * Material selection (including sheet thickness) * Cutting-line illumination (for cutting to a scribed line) ... and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X-axis) * Mounted on recirculating ball screws * Automatically retracts/swings up at maximum travel to . accommodate longer workpieces * Includes selectable "swing-away" (retraction) function * Positioning accuracy: 0.1 mm * Travel speed: approx. 80 mm/sec. - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfers in the front support table - Hinged finger guard with safety switch * Finger guard with viewing windows for cutting along a scribed line - Cutting line illumination (shadow line) - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Movable foot switch - CE mark / Declaration of Conformity - Operating manual + circuit diagram + hydraulic schematic * Image shows an identical model

Condition: new, sheet width 3050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm down holder 16 Stück no. of strokes 10 - 19 Hub/min cutting angle 0.5 - 2.0 ° throat 150 mm Fgsdpfj Afzvrox Aanoi table height 830 mm oil volume 140 ltr. weight of the machine ca. 8.000 kg range L-W-H 4150 x 2250 x 1900 mm ----- Robust electro-hydraulic CNC guillotine shear with "swing-beam" * Includes CYBELEC CNC touch-screen control system * Includes CNC electro-hydraulic blade-gap adjustment * Includes CNC electro-hydraulic cutting-angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with "swing-beam" - Includes CYBELEC CNC touch-screen controller, model "CybTouch 8" - Selected CNC control functions: * Backgauge positioning (X-axis) * Blade-gap adjustment + cutting-angle adjustment * Piece counting * Cutting-length limitation * Material selection (including sheet thickness) * Cutting-line illumination (for cutting to a scribed line) ... and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X-axis) * Mounted on recirculating ball screws * Automatically retracts/swings up at maximum travel distance . to accommodate longer workpieces * Includes selectable "swing-away" (retraction) function * Positioning accuracy: 0.1 mm * Travel speed: approx. 80.0 mm/sec. - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfers in the front support table - Hinged finger guard, with safety switch * Finger guard with viewing windows for cutting to a scribed line - Cutting line illumination (shadow line) - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - 1x mobile foot switch - CE mark / Declaration of Conformity - Operating manual + circuit diagram + hydraulic schematic * Special accessories included: - Pneumatic sheet support device for cutting thin metal sheets * Image shows a machine of a similar design

Condition: used, Year of construction: 2008, control SIEMENS - - - - - - - - - - - - - - - - - - CNC Lathe | INDEX - GU 600 The machine is in a well-maintained condition. Technical data of the machine will follow soon. Fgodpfx Aaozz S Itsnsi We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GU600 | GU-600

Condition: used, Year of construction: 2009, control SIEMENS Fgedpfx Aaozz S Iyonsi - - - - - - - - - - - - - - - - - - CNC Lathe | INDEX - GU 600 The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GU600 | GU-600

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Fsdpfxoz Ru Ere Aanegi Usage: Cooling or Heating of Viscous Products Previously Used on: Yoghurt and Juice Pastes Pump: Mono Pump Meters of Tube in Tube: 13 Condition: Very Good Available: Immediately

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Pinacho Lathe Fgodpjzhw D Tefx Aanei Type SE 200 Year 2023 Fagor CNC Made in Spain Includes Tooling Includes Goggles Machine is like new; it has only 200 hours of use Exact Model: Pinacho SE 200-42 Ax1000/S1 Key Features: ✔ Only 200 hours of use ✔ Virtually new

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: documentation/manual, Colchester Tornado Turning Center 3 Axes: X, Z, Y Model: Tornado 80 CNC: GE Fanuc Series 21i-T Year: 1998 Tornado Bar Feeder Colchester Fjdpfez S U Eujx Aanjgi Model: MBF 1000

Condition: good (used), Year of construction: 2010, functionality: fully functional, FOR SALE CNC Lathe with Two Spindles and Y-Axis Mori Seiki NL2500SY/700 (year 2010) available for sale: CNC Lathe with Two Spindles and Y-Axis Mori Seiki NL2500SY/700 (2010) Specifications and technical capabilities: - Machining capabilities: Max. turning diameter: 356 mm | Max. turning length: 705 mm | Bar capacity: 80 mm - Main spindle: Max. speed: 4,000 rpm | Spindle nose: A2-8 | Motor power: 26 kW - Counter spindle: Max. speed: 6,000 rpm | Spindle nose: A2-5 | Motor power: 11 kW - Turret and Y-axis: 12-position turret (all motorized, max. tool speed: 6,000 rpm) | Y-axis travel: ±50 mm Machine history and condition: - Numerical control: FANUC CNC - Identification: Manufactured in Japan in November 2010 - Certified hours: Power-on time: 16,311 h | Actual cutting time: 15,534 h | Operating time: 3,110 h - Maintenance: Machine in good condition, well-maintained and regularly serviced Equipment and accessories included: - Chip evacuation: Rear chip conveyor - Clamping: Equipped with a collet chuck - Turret tooling: Supplied with 5 drilling chucks and 2 double-sided external chucks - Important note: Sold without a drawbar, without a tailstock, and without a chip extraction system. Fgedpfxj Af A Amo Aanei Logistics: - Footprint dimensions: approximately 4.3 m x 2.1 m | Weight: 6,200 kg - Required power supply: 200V AC / 3-phase / 44 kVA

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Fgodpfx Aeya Iaqjansi Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition Fgedpfx Ajhmmfkoansi