Used Coater for sale (119)

Year of construction: 1998, condition: like new (used), GEA WetCoater 600 batter enrober. 600mm wide weir type batter enrober. Iodpfx Ajigru Dsdija

Condition: used, Coating system Hymmen CombiCoater ELX-S 1400 with UV dryer. Ijdpfx Aelf H Tcjdija * Technical data will follow shortly * For self-dismantling and collection.

Condition: used, Year of construction: 2010, operating hours: 100,000 h, functionality: fully functional, workpiece weight (max.): 50 kg, working width: 1,400 mm, suction capacity: 50,000 m³/h, type of input current: three-phase, total height: 2,800 mm, total length: 65,000 mm, total width: 2,700 mm, power: 365 kW (496.26 HP), input frequency: 50 Hz, input current: 930 A, operating pressure: 6 bar, workpiece width (max.): 1,250 mm, complete lacquering line: 2x Costa K7 sanders (2010, 1st- 2x roller / 2x pads, 2nd- 2x brushing, 1x pad ) Iodpfx Asv Tbgysdisa 1x Heesemann sander (LSM8 2006.12.161) 2x Wikoma hot air drying tunnel (2002) 4x UV lamps dryer ( 2lamps, UV 2000 M2+CRIM+TN 3500/HT / 2lamps UV 2000 M2+CRIM+TN 3500/HT / 1lamp UV 2000 M1+CRIM+TN 3000/HT / 3lamps UV 2000 M3+CRIM+TN 4000/HT) 2x stain roller coaters ( Smartcoater M) 2x heavy putty roller coaters (Smartcoater SP1) 3x lacuer roller coaters (Smartcoater MF) 8x belt/roller conveyors 2x hydraulic lifters (200-900mm height)

Condition: excellent (used), Year of construction: 2011, I sell the 2-cylinder roller coater Cefla Sorbini Smartcoater SP1. Year 2011 Isdpfjwink Nex Adisa Working width 1300mm Suitable for wet on wet, stains, primers and sealers coating application. Very good condition. Fully working. Available immediately.

Condition: used, Year of construction: 2006, operating hours: 100,000 h, functionality: fully functional, feed rate X-axis: 30 m/min, workpiece weight (max.): 50 kg, working width: 1,400 mm, suction capacity: 48,000 m³/h, type of input current: three-phase, total height: 2,800 mm, total length: 68,000 mm, total width: 2,600 mm, working height: 75 mm, power: 720 kW (978.93 HP), input frequency: 50 Hz, input current: 1,800 A, operating pressure: 6 bar, workpiece width (max.): 1,250 mm, compressed air connection: 6 bar, complete lacquering line: 2x Heesemann sanders (LSM8 2006.12.141, 3rollers-3pads/ LSM8 2006112.151, 2pads) 2x Heesemann cleaning mach. (EA8 2006.12.142 / EA8 2006.12.152) Iodpfjv Ta Tfjx Adiea 1x Cefla hot air drying tunnel (FEV EU2/8 6 IRM / TNSL) 4x UV lamps dryer ( 2lamps, UV 2000 M2+CRU+TN 4000/HT / 4lamps UV 2000 M2+CRU+TN 5000/HT / 2lamps / 4 lamps) 2x stain roller coaters ( Smartcoater M-EVO / model M) 2x heavy putty roller coaters (Smartcoater SP / SP1-EVO) 3x lacuer roller coaters (Smartcoater MF) 10x belt/roller conveyors 2x hydraulic lifters (200-900mm height)

Condition: excellent (used), Year of construction: 2009, I sell the 2-cylinder roller coater Cefla Sorbini Smartcoater SP. Year 2009 Working width 1300mm Suitable for wet on wet, stains, primers and sealers coating application. Very good condition. Fully working. Iedog D Uuijpfx Adisa Available immediately.

Condition: used, Year of construction: 1995, machine/vehicle number: 513053, Proficoater Hymmen PFC-S 1400 Painting system for the application of UV-curing paint systems consisting of 3 positions:Item 1 Roller transport TRR 1400: Conveyor length: 2,000 mm Nominal width: 1,400 mm Usable width: 1,300 mm Working height: 900 +/- 50 mm Feed: 6 - 30 m/min FU - control Carrying rollers: D = 80 mm, plastic coated Carrying roller pitch: 150 mmItem 2 Roller coating machine Hymmen ELX-S / PFC - Manufacturer Hymmen - Type ELX - S / PFC - Year of manufacture 1995 - Working width 1300 mm - Working height 900 mm + - 30 mm - Part height max. 100 mm - Paint application roller 50 Shore - Roller diameter ~ 238 mm - Application cylinder speed 6 - 45 m/min - Dosing roller hard chrome-plated ~ 174 mm - Dosing roller speed 2 - 12 m/min - Roller transport - Length ~ 700 mm - Feed ~ 6 - 35 m/min - Total connection approx. 2 kW - With control cabinet - Volt, Hz 400 / 50 Iedpsumvi Sofx Adiea - Location, in stock - Voltage fluctuations max. +/- 5 % UV channel Hymmen (Supferfici) 1 R - Manufacturer Hymmen / Superfici - Type TU 166 - Year of manufacture 1995 - Number of tubes from above 1 piece - Tubes positioned straight - Tube power 80 W/cm - Bar transport 3,000 mm (+1,000) mm - Bar pitch 80 mm - Exhaust air line, fan 250 mm - Adjustable feed rate ~ 6 - 30 m/min - Loading meter on truck 3.8 m - Location, in the warehouse - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5% General data:Coating: from above Operating side: leftYear of manufacture 1995 Working height: 900 +/- 50 mm, Effective usable width: 1,300 mm, Passage height: max. 100 mm, Transport feed rate: 6 - 30 m/min, frequency converter control, Mains voltage: 400 V, 50 Hz, Protection class: IP 54, Connection value: approx. 16 kW, Fuse: 63 A provided by customer, Total length: approx. 5,660 mm, Total width: approx. 2,700 mm,Panel type: wood-based panels,Panel length: min. 300 mm,Panel weight: max. 80 kg/m²,Paint: UV paints solvent-free 60 140 DIN 4sec,Application quantity 3 - 40 g /m² (optionally higher with a different roller) EX area: The ELX-S application machine is designed for cleaning with solvents of temperature class T3. When setting up and operating it, it must be ensured that no ignitable mixture within the meaning of the explosion protection directive occurs outside a distance of 500 mm around the paint-carrying parts of the machine.

Condition: used, Year of construction: 1994, machine/vehicle number: 6613, With this roll press, you can Iodpjwc Skgsfx Adisa press different materials together in a single pass. Application example: Previously, sandwich panels were bonded and pressed with this machine. Technical data: - Manufacturer: Bürkle - Type: AM - Year of manufacture: 1994 - Working width: 1,600 mm - Working height: 880 + - 20 mm - Part height 20 - 160 mm - Operating side left - Pressure cylinder from above, rubberised - Counterpressure cylinder from below, rubberised - Width of counterpressure cylinder 1,700 mm - Feed 3 m/min. - Total electrical connection - Volt/Hz 400/50 - Location in warehouse in Blomberg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 700 mm, total width: 2,000 mm, total height: 1,350 mm, type of input current: three-phase, input voltage: 380 V, working width: 1,300 mm, The DRM model offers the most economic single roller coater for smaller or start-up companies looking to oil wooden floorboards. This machine is specifically designed for the application of oil and glue. The machine is fully operational without any functional defaults. The machine comes with two new glue trays. Contact us for a quote, or visit our Test Center for a free demo. Iodpfxexdxf Rs Adioa

Condition: excellent (used), Eos EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The machine has been serviced regularly (last service: 08/2024). It has exclusively processed PA11 (EOS PA1101). The system is offered including accessories: 1 x build box, docking station, multibox with cooler Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been thoroughly inspected." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set: PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. charge: 420 g) Multibox is a typical EOS accessory for powder handling, used for transporting and interim storage of material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Iodpfx Adsxw Uyqsisa Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): Travel 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Take-off chamber heating: 1.6 kW, resistance heater coil with separate temperature measurement Control & Operation: Process computer with Windows 7 OS 15.1" TFT display, membrane keypad & mouse Ethernet network connection Other: Noise emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Line protection: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see picture) Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Specifications and information are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 1987, functionality: fully functional, total length: 1,400 mm, total width: 600 mm, total height: 1,800 mm, input voltage: 380 V, input frequency: 50 Hz, The Koppens ER 400 enrober is designed to improve efficiency and precision in food production processes, particularly for enrobing products such as meat, fish and other preparations. Thanks to its robust design, it guarantees uniform and homogeneous coating, delivering a high-quality finished product with every cycle. In fact, this machine adapts easily to different types of production, making coating fast and precise. What's more, the Koppens ER 400 coater stands out for its ability to offer total control over production speed, enabling parameters to be adjusted to suit specific needs. With an integrated liquid pump, it facilitates even coating application, reducing raw material losses while optimizing results. What's more, its compact design enables seamless integration into existing production lines, while offering flexibility for diverse product types. Finally, this enrober contributes to increased productivity by reducing manual intervention, thus ensuring greater reliability and efficiency in food processing operations. In short, the Koppens ER 400 coater is an indispensable solution for companies seeking to optimize their coating processes. Isdpfxeu E N Iyj Adiea Technical specifications: Power: 0.61 kW Frequency: 50 Hz Voltage: 380 V + 3 Ph Amperage: 3.2 A Weight: 135 Kg Belt width: 400 mm Mesh width: 5 mm Adjustable speed Liquid pump

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 700 kg, workpiece height (max.): 2,300 mm, workpiece length (max.): 6,000 mm, insulation material: Mineralwolle, insulation thickness: 150 mm, workpiece width (max.): 2,000 mm, Complete Plant with Chemical Pretreatment (7 Stages) for GSB Certification (QUALICOAT) (Suitable for Multimetal) All dimensions and further modifications can be taken into account during design and planning. The offer includes the following components: - Pretreatment cabin incl. reverse osmosis unit - Walk-in coating booth - Powder spray gun - Powder curing oven - Dryer - Manual conveyor system - Lifting-lowering station - Electrical control system Details: 1. Walk-in cleaning cabin, pretreatment for steel and aluminum The cleaning cabin is designed for automatic cleaning. Medium pressure spraying can be applied. The cabin contains 7 different spray tanks. Maximum part size: L = 6000 mm, W = 2000 mm, H = 2300 mm. 1. Cabin dimensions - Length: 6,500 mm - Width: 3,000 mm - Height: 3,600 mm 2. Total pretreatment dimensions - Length: 6,600 mm - Width: 4,640 mm - Height: 4,300 mm Process Stages: 1st Stage: Degreasing/Neutral Pickle - Heated tank, 50-55°C, time = 3-6 minutes, drip-off time = 80 seconds 2nd Stage: Acidic Mineral Pickle - Heated tank, 50-55°C, time = 3-6 minutes, drip-off time = 80 seconds 3rd Stage: Rinse 1 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 1 minute 4th Stage: Rinse 2 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 45 seconds 5th Stage: Rinse 3 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 45 seconds 6th Stage: Nano-Ceramic - Processed at ambient temperature, time = 0.75-1.5 minutes, drip-off time = 60 seconds 7th Stage: Overhead spray ring for post-rinsing after Stage 6 - Rinsing with ambient temperature, time = 1 minute, drip-off time = 60 seconds 8th Stage: Passivation, no-rinse for aluminum - Rinsing with ambient temperature, time = 2-3 minutes, drip-off time = 1-2 minutes 1.1. Reverse Osmosis Unit - Reverse osmosis system, 250 liters/hour 1.2. Oil Skimmer - Tank no. 1 is equipped with an oil skimmer "UniSkim-21-100". Construction: The spraying system is two-part and movable, and can be shifted up to 500 mm via a pneumatic sliding system. Return to the tanks is also mobile via a pneumatic sliding system with 7 positions in order to serve the 7 tanks. 2. Walk-in coating booth 1. Booth dimensions - Length: 7,400 mm - Width: 4,000 mm - Height: 3,236 mm 2. Booth dimensions incl. extraction system - Length: 8,552 mm - Width: 6,232 mm - Height: 4,393 mm The booth features 2 single-side pneumatic doors for entry/exit of workpieces, and an additional side door for the coater. 3. Powder Coating Equipment Wagner, Manual System "Sprint 2 B" 4. Powder Curing Oven - Internal dimensions: - Length: 6,500 mm - Width: 2,200 mm - Height: 3,416 mm 5. Dryer - Internal dimensions: - Length: 6,500 mm - Width: 1,200 mm - Height: 3,416 mm 6. Manual Conveyor System Iodpfeffv Tpex Adija The conveyor system consists of: The conveyor system is designed for a crossbar weight of 700 kg. The carriage can carry a maximum of 2,000 kg on 3 rails.

Condition: used, Year of construction: 2003, The Manroland Roland 504-L is a high-performance four-color sheetfed offset press, manufactured in 2003 and currently operational in a printshop in Germany. With a 520 x 740 mm format and 170 million impressions, this press is built for demanding, high-volume production environments. The Roland 504-L is equipped with coating units for added versatility, and features semi-automatic plate change (PPL) for quick job turnarounds. Automatic format adjustment and non-stop devices for feeder and delivery ensure seamless operation and minimal downtime. The press also includes automatic washing devices for ink rollers, blankets, and impression cylinders, simplifying maintenance and improving productivity. Advanced features such as inking unit temperature control (Tempcontrol NT3), a powder device (Hitronic-S Grafix), and a dampening solution cooling unit (Technotrans) guarantee consistent print quality and optimal operating conditions. The integrated Grafix IR dryer further enhances drying efficiency, making this press a comprehensive solution for high-quality, high-speed printing. Format: 520 x 740 mm Equipment: 4 Colors Offset press with Coater RCI with CCI Color Pilot Press Pilot Roland Matic Delta Dampening with Technotrans Impression Cylinders, Blankets and Rollers Washers PPL Auto. Plate Loading Inking unit temperature control (Tempcontrol NT3) Powder device (Hitronic-S Grafix) Coating Unit with Extended Delivery Air Glide Isdpfxsxnbiao Adija Grafix IR dryer

Condition: used, Year of construction: 2008, machine/vehicle number: 0117580020, Printing machine for non-synchronized printing of wood grains or other designs from above on flat workpieces in one-colour printing, suitable for aqueous and UV printing inks. - Type: SLDR 1300 - Year of manufacture: 2008 - Operating side: right - Workpiece width: 1.250mm - Min. workpiece length: 350mm (300mm) - Workpiece height: ~ 3-100mm - Suitable for printing ink, water-soluble and UV printing inks Transport system: - Conveyor belt width: 1,230mm - Max. Production speed: 10m/min. - Feed speed: 8-25m/min. Isdpowhp Dzefx Adija - Rubber coating 60Shore (6By1) - Diameter 186mm Application unit: - Rubber coating 50Shore (5by1) - Diameter: 238mm - Engraving cylinder, diameter: 174mm - Separate, infinitely variable FU direct drive for engraving cylinder and application roller. Engraving roller: - Diameter - circumferential speed Machine dimensions: - Installation length: 800mm - Working height approx. 900mm +-20mm - Width: ~ 2.700mm - Electrical connected load: 5kW - Weight: approx. 1.400kg - Location: in stock

Condition: like new (used), Year of construction: 2023, operating hours: 2 h, functionality: fully functional, working width: 400 mm, height adjustment type: electric, warranty duration: 6 months, Roller Application Machine Make: Cosma Model: 400 RC Iedpfjwu T Abox Adija Year of manufacture: 2023 (demo machine – never used in production!) 6-month used machinery warranty! 2-roller application machine for oil application With Cosma's roller application system, oils are applied, among other things, to solid wood floors (parquet), paneling, stairs, garden materials, scaffolding timber, and wall decorations. Working width: 400 mm Suitable for workpieces: Thickness: 10 – 50 mm Working height: 900 mm Equipped with: - Metering roller, 0.37 kW - Rubber-coated application roller, 0.37 kW, 25 Shore With electric height adjustment and mechanical height display Control panel for: Feed speed, amperage per roller, and roller height adjustment

Condition: excellent (used), Coherent Type: Creator RA (3D metal printer) + Sieve station Retsch AS200 basic (with the following sieves: 2x 63 µm, 1x 200 µm, 1x 250 µm) Sandblasting unit Reitel Sanduret 2 S Ultrasonic device Allpax Palssonic UD22 Wet vacuum cleaner Ruwac NA7-11 H (ex-protected) Various accessories (approx. 15 new steel build platforms, 1x spare filter, coater blades, original packaged build material approx. 22 kg 17-4PH) Technical data: Printer requires new license and PC Laser power: Yb: Fiber 250 W, wavelength 1070 nm. Build platform: 100 mm x 110 mm (diameter x height) Dimensions: 717 mm x 858 mm x 1794 mm Accuracy: Repeatability (x, y, z = 15 µm), typical accuracy 40 µm, minimum feature size (x, y = 80 µm, z = 20 µm). CREATOR® RA supports titanium, aluminium, and non-reactive materials. Sieve station Retsch AS200 basic (with the following sieves: 2x 63 µm, 1x 200 µm, 1x 250 µm) Isdpfxswupvko Adija Sandblasting unit Reitel Sanduret 2 S Ultrasonic device Allpax Palssonic UD22 Wet vacuum cleaner Ruwac NA7-11 H (ex-protected) Various accessories (approx. 15 new steel build platforms, 1x spare filter, coater blades, original packaged build material approx. 22 kg 17-4PH) File formats: STL, STEP, IGES, Object. Electrical requirements: 230 V/1 Ph/50 Hz/16 A. Condition: used Scope of delivery: (see pictures) Weight: 360 kg (Changes and errors in the technical data and information are reserved!) We are happy to answer further questions by phone.

Condition: as good as new (ex-display), Semi-automatic Universal Screen Printing Machine TIC SCF 550 DHE Ijdpfxsw N N Iue Adisa Flat and rotary printing machine, floor-standing model, printing format 300 x 450 mm or printing diameter 160 x 300 mm, max. screen frame size 730 x 530 x 30 mm. Machine comes with base frame and height-adjustable feed table with XY-adjustment capabilities. Height adjustment of feed table approx. 300 mm, allowing a max. print object height of approx. 450 mm. Upper frame with continuous lateral safety guard, equipped with 2 squeegee sets, requires 6 bar compressed air, connection: 230V, 50Hz. Unused demonstration model. Electro-pneumatically controlled machine with microprocessor control. Flatbed printing with T-slot table plate (option: vacuum table plate with vacuum pump), rotary printing with universal holder for cylindrical items as well as rack-and-pinion drive for multi-color printing, including inflation device. In setup mode, print movement can be adjusted individually. Squeegee stroke, squeegee pressure and flood coater are steplessly adjustable.

Condition: excellent (used), Year of construction: 2007, Komori Lithrone LS 640 C (X) Year: 2007 Max. paper size: 720x1030 mm Minimum size: 360 x 520 mm Image area: 710x1020 mm Plate size: 800 x 1030 mm Speed: 16,000 sheets/hour Stock thickness: 0.06 - 1.00 mm Blanket size: 1040 x 920 mm Number of colors: 6 AMR KHS APC plate change Iodexdiqdepfx Adisa Cocking Skeleton cylinder Ink temperature control Grafix powder spray Coater with Anilox roller Baldwin IVT IR drying system Powder spray Non-stop feeder Non-stop delivery Automatic impression cylinder washing Automatic blanket washing Automatic roller washing Extended delivery Elevated machine KOMORIMATIC dampening system PQC Print Quality Control

Year of construction: 1998, condition: good (used), Straight Machine RCI: Remote Control Desk APL (Fully-Automated Plate Changing ) Ink. Temperature Control Grapho Metronic Technotrans Cooling Device Roland Deltamatic Dampening IR Dryer QuickStart: re-start with fewer waste sheets Kersten Antistatic Device on Feeder LCS: Low Coverage Stabilisation of Inks Isdpfohy Tfwox Adiea Automatic Coater Washup Device with Brush Quick Action Clamps Coating Coating System with Doctor Chamber Blade Wekotron: Powder Sprayer Extended Delivery

Condition: used, Year of construction: 1987, With this roll press, you can press different materials together in a single pass. Application example: Previously, sandwich panels were bonded and pressed with this machine. Isdpfxswd Nx Dj Adiea Technical data: - Manufacturer: Bürkle - Type: AM - Year of manufacture: 1987 - Working width: 1,600 mm - Working height: 880 + - 20 mm - Part height 20 - 160 mm - Operating side left - Pressure cylinder from above, rubberised - Counterpressure cylinder from below, rubberised - Width of counterpressure cylinder 1,700 mm - Feed 3 m/min. - Total electrical connection - Volt/Hz 400/50 - Location in warehouse in Blomberg

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 540.552, HEIDELBERG SM102-5L Year 1998 Machine No.: 540.552 Approx. 115 million impressions Sheet-fed offset printing press – 5 printing units plus varnish coater Straight printing press High pile delivery Format: 28 x 40 in (720 x 1030 mm) Technical Specifications: • Max. production speed: 15,000 sheets/h • Max. paper size: 720 x 1020 mm • Min. paper size: 280 x 420 mm • Paper thickness: 0.04–0.6 mm Ijdpfexx D T Nex Adisa • Max. print area: 700 x 1020 mm • Plate: 790 x 1030 mm, thickness 0.30 mm • Blanket: 1045 x 790 mm, thickness 1.90 mm • Dimensions (LxWxH): 12.0 m x 3.0 m x 2.1 m • Power requirement: 85 kW (without dryer) • Weight: approx. 40,000 kg Included Equipment & Accessories: • Fully equipped • Steel plates fitted on feeder and delivery sections, with ramp (for plastic/wooden pallets) • Stream feeder with belt • Electronic double sheet detection • Electromechanical double sheet detector • Electronic side lay control: photoelectric and acoustic • Anti-static devices at feeder and delivery • Alcolor continuous dampening system with Technotrans alcohol dosing, cooling and re-circulation • PRESET automatic format and thickness adjustment • CPTronic – CPC 1.04 control and diagnostics, self-diagnosis, remote inking/dampening, axial, circumferential, and diagonal register control with light pen, daylight illuminator, job memory via cassette/memory card • Programmable automatic blanket cylinder wash • Programmable automatic roller wash • Autoplate semi-automatic plate changer with Bacher Control 2000 register system • All cylinders chrome-plated • Conventional coating unit • IR dryer • Powder spraying device • High pile delivery • Automatic sheet de-curler • Oil drip pan, tools, documentation • Complete with all standard parts and accessories Condition: No damage to cylinders, machine in good working order Availability: 01/2026 Location: Visible in production, Northern Italy Video available: Coming soon

Condition: ready for operation (used), Year of construction: 2007, Brand: Sorbini Model: VS/33-ACT-F Machine no.: MP1SCO27052 Year of manufacture: 2007 Compressed pneumatic air Pneumatic propellers Motor: 1.6 kW Weight: 1150 kg Iodpfjxtal Djx Adioa Stock no.: 2002709BXA

Condition: excellent (used), Year of construction: 2017, Cretors flothru FTCC12 Screw coater Iodowvbtqspfx Adisa Serial: 17031051 2017, stainless screw coater, screw length 3200mm, screw width 300mm, screw sits in jacketed vessel, previously used in caramel popcorn line, 3Ph

Condition: like new (used), Year of construction: 2025, operating hours: 8 h, functionality: fully functional, total length: 700 mm, total width: 2,000 mm, total height: 1,350 mm, type of input current: three-phase, input voltage: 380 V, working width: 1,300 mm, The DRM model offers the most economic single roller coater for smaller or start-up companies looking to oil wooden floorboards. This machine is specifically designed for the application of oil and glue. With just 8 operating hours, this machine is as good as new. Ijdpfx Adsxdxabsiea Contact us for a quote, or visit our Test Center for a free demo.

Condition: used, Year of construction: 2018, Diesinking / EDM 3D metal printer Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Ijdpfovtftwjx Adiea Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Machine Opening: 450 x 180 mm