Used Feed for sale (11,873)

Condition: used, Year of construction: 2020, This is a Product Pump with the Balance tank for viscous products ie. yoghurt, pastes, cream, etc. It is designed to transfer the product from A To B without overheating or beating the product. This is located on skid with an extra high speed volume pump for the CIP wash down of the system. Control panel is included in the line. Product Pump: For viscous Products CIP: Special CIP Pump on the skid Stainless steel: Yes Electricals: 3 phase / 400v /50-60hz Ibjdpfx Asz Izh Tom Doc Available: Immediately

Condition: used, total length: 11,500 mm, total width: 2,450 mm, total height: 2,600 mm, Colour: Green Empty weight: 16.500 kg Veneer press Feed-through press HOT Colombo Machine dimensions: 4400x1400 Oil heated input/output is included 8 cylinders Complete with glue roller etc. - Documentation available: No - CE certificate present: No - Press drive: Hydraulic - Max. workpiece length [mm]: 4500 - Max. workpiece width [mm]: 1400 - Max. workpiece height [mm]: 140 - Total stroke [mm]: 140 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 8 - Cylinder diameter [mm]: 85 - Working pressure [kg/cm²]: 4 - Heating type: Oil heated - Voltage [V]: 400 - Transport dimensions: 11500mm x 2450mm x 2600mm (l x w x h) - Transport weight [kg]: 16500kg Ijdpownhvvjfx Am Dsbc Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, L & Z spindle lathe / WEILER CONDOR B / incl. Heidenhain 3-axis digital control - Machine from an educational institution / in perfect condition - Three-axis Heidenhain digital control - Center height 165 mm - Swing over bed 330 mm - Swing over cross slide 185 mm - Turning length approx. 800 mm - Spindle speeds (geared) 22 - 2800 rpm - Thread cutting / Metric / Inch, etc. - Bar capacity 40 mm - Tailstock / Morse taper MK 3 - Electric chuck guard - Multifix base holder with inserts - Three-jaw chuck Forkardt - Machine lamp Iedpfxez St Iuj Am Debc - Chip guard - Bed stop - Machine feet - Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight 1100 kg Errors and omissions excepted.

Condition: not inspected (used), machine/vehicle number: 42893, Lead screw and feed spindle lathe, manufacturer: ZMM/Bulgaria, type: L400 TS, serial number: 42893, year of manufacture: unknown, turning length: 1,000 mm, up to 2,180 rpm, 3-axis digital display, manufacturer: Facor, Multifix steel tool holder, coolant system, tailstock, light, splash guard, 3 steady rests, 4-jaw chuck, accessories. Ijdpjz R Nalefx Am Dobc

Condition: ready for operation (used), functionality: fully functional, L & Z Lathe WEILER Matador -Center height 140mm -Distance between centers 500mm -Speed range (continuously variable speed adjustment) 25-3000 RPM -Spindle bore approx. 36mm -Automatic longitudinal and cross feeds -Thread cutting / Metric / Inch, etc. -Tailstock / Morse taper MK3 -Electric chuck guard -Multifix with insert -Three-jaw chuck with interchangeable jaws -Machine feet -Change gears -Drill chuck & rotating center -Documentation Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight approx. 600 kg Errors and omissions excepted. Iedpfxez Nltdj Am Debc

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, L & Z lathe / WEILER CONDOR AC / Stepless speed control / FROM AN EDUCATIONAL INSTITUTION - CE marking - Year of manufacture: 2000 - Swing over cross slide: 180 mm - Distance between centers: 165 mm - Max. swing: 330 mm - Turning length: approx. 800 mm - Speed (stepless): max. 2800 rpm - Automatic longitudinal / cross feeds - Threading / Metric / Inch etc. - 3-jaw chuck - Tailstock - Chip guard - Machine light - Multifix base and 6 inserts - Various change gears - Coolant system - Various operating tools - Documentation Iedpfx Aoz Izi Dom Dsbc Dimensions: L x W x H: 1.8 x 1 x 1.8 meters / Weight: 1300 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2000, pressing force: 80 t, bale width: 1,100 mm, bale height: 720 mm, noise level: 85 dB, oil tank capacity: 900 l, empty load weight: 24,000 kg, operating pressure: 250 bar, For sale: a Bollegraaf 80A baling press from the year 2000, including a feed conveyor. The machine is in working condition and is still in use. The machine can be inspected by appointment. The machine is equipped with a pre-compression flap, cross-tying with horizontal wires, and is powered by a 45 kW main pump. The feed conveyor has a working width of 1500 mm. Iedpfxsz Sza Ej Am Dsbc

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, L&Z Lathe KMUTH BASIC Plus incl. 3-axis digital display - Year of manufacture 2011 - CE marking - Three-axis digital display - Center height 150mm - Max. turning diameter 300mm - Max. turning diameter over support 178mm - Max. turning diameter without bridge 430mm - Center distance 810mm - Spindle bore 38mm - Spindle speeds (geared) 60 - 1550 rpm (9 steps) - Automatic longitudinal / facing feeds Ijdpfx Amez Hwx Eo Debc - Spindle mount - Camlock D1 - 4" - Tailstock taper MK 3 - Quill travel 100mm - Bed width 180mm - Multifix base with insert - Electric chuck guard - Work light - Coaxial center - 3-jaw chuck - 2 x steady rests - Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.6 meters / Weight 550 kg Errors and omissions excepted.

Condition: ready for operation (used), functionality: fully functional, Weiler Matador lead and draw spindle lathe -Distance between centers: 500 mm -Swing over bed: 140 mm -Automatic longitudinal/cross feeds -Thread cutting / metric, inch, etc. -Spindle bore approx. 36 mm -Spindle head: Size 5 -Speed range: (geared) 15–3,550 rpm -Brake motor -Coolant pump -Chuck guard -Forkardt F 160 collet chuck -Quick-change tool holder Multifix & insert -Drill chuck -Follower rest -Documentation Iodpfxjztbbto Am Djbc Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight 600 kg Errors and omissions excepted

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, overall weight: 3,000 kg, COMPLETE FEEDING LINE 3v1 Ibsdpfxjz S T Sgo Am Doc UNCOILER + STRAIGHTENER + FEEDER Type CR-AP 400 Year 2013 width = 400 mm thickness minimal 0,5 mm thickness max = 3,0 mm 9+2 straightener rollers UNCOILER: model SM15 Year 2013, motorized, hydraulic expansion pressure arm coil width 400 mm Decoiler capacity 1500 kg The feeding straightener straightens the material and feeds it into the press. The "CR AP" series features an opening head for easier roller cleaning and pilot release. This type of machine is suitable for working with medium-thickness strips.

Condition: used, Ifsys Type: 114100 Type: VL 13 Screw feeding system Hopper system with 2x Vibroliner and 2x Vibrohopper 1x Return conveyor Isdjzdp Icspfx Am Djbc 2x Control unit FC 1000 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: ready for operation (used), functionality: fully functional, WEISSER HEILBRONN Junior / L & Z lathe with Heidenhain digital control -Center height 220mm -Turning diameter over bed 440mm -Distance between centers 1000mm -Spindle bore approx. 50mm -Spindle speeds 40 - 2000 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch, etc. -Heidenhain digital display ND 780 -Forkardt F250 3-jaw chuck -Multifix base and inserts -Electric chuck guard -Follow rest -L & Z spindle cover -Work light -Documentation Ibedpfezwggvex Am Djc Dimensions: L x W x H 2.6 x 1.3 x 1.8 meters / Weight approx. 1800 kg Errors and omissions excepted.

Condition: used, Year of construction: 2003, Overview This Krones preform feeding system stores preforms in bulk and delivers them, oriented, to the infeed of a stretch blow moulding machine. It was in production until March 2026, feeding a Krones Contiform S24 blow moulder. The preforms are tipped into the buffer silo, carried up by the inclined preform elevator and aligned on the roller sorter, which hands them over in a continuous row to the blow moulder's infeed rail. The access platform gives the operator safe access to the roller sorter. Technical data - Manufacturer: Krones - Machine type: preform feeding system for a stretch blow moulding machine - Operated with: Krones Contiform S24 blow moulder - In production until: March 2026 Scope of Delivery Iodez Sr Imepfx Am Dobc - Preform buffer silo | Krones | stainless steel hopper with access stairs - Preform elevator | Krones | inclined elevator from the silo to the roller sorter - Roller sorter | Krones | orients the preforms and feeds them into the blow moulding machine - Access platform | Krones | steel platform with stairs and railings Condition Used, dismantled and stored. The preform tipper and the electrical control cabinet are not included; the preform tipper visible in one photo is not part of the offer. Availability Available immediately. Location: Germany. Viewing is possible.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Equipment: CE marking, scorer, Horizontal panel dividing saw / Horizontal panel saw with lifting table feed Manufacturer: SCM / Gabbiani Type: Gabbiani ST 115 Year of manufacture: 2018 Horizontal beam saw with lifting table feed from the rear, originating from a parquet factory. Cutting length approx. 3200 mm Cutting depth on the lifting table approx. 1850 mm Max. stack height on the lifting table (with supports) approx. 600 mm Saw blade projection 115 mm Variable saw carriage speed 0 - 135 m/min. Variable sliding table speed 0 - 70 m/min. Motor of the main saw blade approx. 9 kW Main saw blade speed 3900 rpm Saw blade diameter 400 mm Motor of the scoring saw approx. 1.8 kW Scoring saw speed 6300 rpm Scoring saw blade diameter 160 mm 6 clamping devices (3 of which with front aligner) 2 air cushion tables, each with blower Ibodjzyx Evepfx Am Dec Voltage: 400 V, 3 phases, 50 Hz, 43 A Weight approx. 5500 kg Data partially estimated and taken from the brochure.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 20,000 h, functionality: fully functional, overall weight: 15,000 kg, rotor diameter: 500 mm, rotational speed (max.): 200 rpm, power: 90 kW (122.37 HP), input voltage: 400 V, type of input current: three-phase, The MeWa Universal Granulator UG 1000 is a high-performance, stationary single-shaft secondary shredder, specifically designed for the fine shredding and recycling of various composite materials and waste. The machine operates according to the principle of a guillotine shear, in which the material is cut between rotating and stationary blades. Drive power: 90 kW Cutting chamber / working width: 1,000 mm Number of blades (rotor / stator): 25/5 blades Ibsdpfx Ajz Antujm Doc Rotor diameter (circle of rotation): 500 mm Total weight: approx. 15 tons Screen size: Flexible, interchangeable screens under the rotor determine the final particle size (typically between 10 mm and 80 mm).

Condition: used, Board feeding system Jacksteel Ibjdpsz Syifofx Am Djc Year of construction: 2018 JackSteel board feeding system for transporting boards/blocks out of the saw, separating the blocks one by one and then feeding them into the centre for re-sawing. Below the line is a chain conveyor for the collection of chips and waste. The line operates at speeds of up to 90 m/min.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, L & Z Lathe WEILER CONDOR B incl. three-axis digital display -CE marking -Machine from an educational institution / very well maintained -Center height 165mm -Swinging diameter over bed 330mm -Swinging diameter over cross slide 185mm -Turning length 800mm -Spindle speeds 22 - 2800 rpm -Automatic / longitudinal and cross feeds -Threading / metric / inch, etc. -Bar capacity 40mm -Tailstock / Morse taper MT3 -Multifix base and inserts -Three-jaw chuck 200mm -Electric chuck guard -Spindle cover -2x Emergency stop -Coolant system -Chip guard -Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight 1200 kg Ibsdpfx Aezvx A Tem Dsc Errors and omissions excepted.

Condition: used, Year of manufacture: 2000 Colour: Grey Veneer press continuous press gluing press plate press Colombo Machine dimensions: 4500x1300 Oil heated to a maximum of 140 degrees input/outpu t6 cylinders Solid plates 40mm - Details: - └ Description: Osama glue roller is no longer available - Year: 2000 - Documentation available: No - CE certificate present: No - Press drive: Hydraulic - Max. workpiece length [mm]: 4500 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 140 - Total stroke [mm]: 140 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 120 - Heating boiler present: Yes - Heating type: Oil heated - Max. working temperature [°C]: 140 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Iedpfx Aswnhabem Debc Yorick Diebels

Condition: excellent (used), Year of construction: 2017, Böllhoff Uniquick Vario screw feeding machine UNIQUICK Feeder Type 360 Plastic sorting container, ∅ 360 mm Ibodpjwbr N Hefx Am Doc Quiet and surface-friendly conveying Optimal helix dimensioning depending on the conveyed material (width and height) Integrated and controlled baffle High wear resistance Consistent conveying performance through amplitude control In a sound-insulated housing on a frame Belt width: 20 mm Head diameter of the fastener up to 20 mm Length of the fastener up to 55 mm Filling volume: 3 l SIM BB-10-C (ws) belt bunker Bunker container, chute: stainless steel Belt: white, FDA-approved Filling volume: 10 liters Max. filling weight: 35 kg Drive: AC gear motor 230V / 50Hz Bunker with innovative drive to ensure a metered, quiet and component-friendly feed of screws and fasteners. UNIQUICK Multi Modular expandable 3-way diverter Distributes the inspected screws to three stationary screwing machines Singulation Adapted outlet chute Precise guidance at the head Modular design Few format-dependent parts Reproducibility of the component Sensor monitoring Maintenance-free Noise reduction Screw conveying in a plastic container Lining with noise-reducing material Airtight injection of screws Compressed air maintenance unit Compressed air connection: 6 bar Power supply: 230 V AC Year of manufacture: 2017 Dimensions: HxWxD 1050 x 650 x 650 mm Technical data You can find more new and used items in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2000, functionality: unexamined, Equipment: documentation/manual, Eccentric press VSS, type LE 400 C, complete with LASA strip feed system. Press LE 400 C Table size 1250 x 895 mm Ram size 950 x 560 mm Weight 21,000 kg Nominal capacity 400 t (metric tons) Stroke rate 40/min Stroke length 450 mm Dimensions 1550 x 2900 x 3610 mm Unwinding reel – up to 4000 kg - Coil outer diameter – 1600 mm - Coil inner diameter – 450/550 mm - Strip width – 450 mm - Revolutions – max. up to 25/min LASA 400 strip straightening machine Ibjdpfsz Rk Shsx Am Dec - Adjustable height - Speed – up to 70 m/min - Complete documentation - More information and detailed images available upon request - The straightening machine with unwinding reel can also be sold separately. Press – after inspection - Stroke adjustment and clutch-brake

Condition: ready for operation (used), WEILER Matador VS 2, including a new three-axis digital display, Iedpfxezr Rnyj Am Djbc from a school workshop. -Maximum distance between centers: 140 mm -Distance between centers: 500 mm -Spindle speeds: 15 - 3550 rpm -Automatic longitudinal and cross feeds -Threading capabilities: metric, inch, etc. -New three-axis digital display -Electric chuck guard -Work light -Multifix base with inserts -Coolant system -Three-jaw chuck / collet chuck -Tailstock MK 3 -Various tools -Documentation Dimensions: L x W x H: 1.5 x 0.6 x 1.5 meters / Weight: 680 kg Errors and omissions excepted.

Condition: refurbished (used), functionality: fully functional, Weiler Primus lathe with lead screw and drive spindle. Ijdpfjz Nh Epox Am Djbc Includes tailstock. The machine can be inspected while powered on prior to purchase. Shipping is possible for an additional charge. VAT can be shown separately.

Condition: ready for operation (used), Year of construction: 2012, L & Z Spindle Lathe ZMM - CU 630 RD incl. Digital Display -CE marking -Digital display -Year of manufacture 2012 -Center height 315mm -Turning diameter over guides 630mm -Turning diameter over cross slide 430mm -Distance between centers 1500mm -Turning diameter with bridge removed 830mm -Spindle bore 103mm -Automatic longitudinal / facing feeds -Motorized rapid traverse in the carriage -Speed range 16 - 1250 RPM (stepless speed control) -Drive power 11Kw -Three-jaw chuck / ROTAX 315 incl. hard & soft jaws -Chuck guard -Tailstock -Steady rest -Multifix base with inserts -Coolant system Isdpszhx Hvofx Am Debc -Work light Dimensions: L x W x H 3.5 x 1.5 x 1.7 meters / Weight 4000Kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Hofmann table milling machine, built in 1978, in a heavy-duty industrial design. The machine is equipped with a Holz-Her 3-roller feed unit ETZ and is suitable for a variety of milling operations in carpentry workshops, joineries, and in the furniture and interior design industries. The height adjustment of the milling spindle is conveniently done via a handwheel. The milling jaws can be adjusted manually. Three different spindle speeds allow for adaptation to various milling operations. In addition, the machine is equipped with 3 Aigner rails. Technical data Manufacturer: Hofmann Year of construction: 1978 Milling spindle diameter: 30 mm Spindle speeds: 6,000 / 8,000 / 10,000 rpm Height adjustment: by means of a handwheel Milling jaw adjustment: manual Dust extraction connections: Ø 120 / 140 mm Machine size: approx. 2,700 x 1,100 mm Heavy-duty table and machine construction made of cast iron Equipment Holz-Her 3-roller feed unit ETZ 3 feed rollers Height-adjustable feed unit Manual milling fence 3 Aigner rails Milling spindle Ø 30 mm 3 spindle speeds Handwheel for height adjustment Dust extraction connections Accessories as shown in the photos Scope of supply Isdpfx Amezvdk Aj Debc Hofmann table milling machine Holz-Her 3-roller feed unit ETZ 3 Aigner rails Accessories as shown in the photos The machine can be inspected and tested under power by appointment. Transport possible for an extra charge! The machine is subject to differential taxation according to § 25a UStG. The machine will be inspected before sale. For used machines with a year of construction of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 2001, functionality: fully functional, Gassner closure feeding system with pneumatic lifting station and blower Air transport filter system Special price due to warehouse clearance: €3,600 ex works Külsheim. Iodjww Hvmspfx Am Djbc