Used Cold Saw for sale (6,984)

Condition: used, Year of construction: 2007, saw blade diameter 370 mm capacity 90 degrees: flat 200x100 mm capacity 90 degrees: round 130 mm 34/68 UpM total power requirement 2,6 kW Todpfxjzr Rqbo Al Asc height of material-table 900 mm dimensions of the machine ca. 1335x865x2175 m weight of the machine ca. 430 kg

Condition: good (used), Year of construction: 2003, Machine is in good working condition. Tjdpjz Egngefx Al Aoc Parts shown by hand not come.

Condition: good (used), Year of construction: 2011, From a company liquidation: Berg und Schmid VKS 370 HA Year of manufacture 2011 Semi-automatic machine 4-meter roller conveyor left + right Left stop with digital length measuring system, adjustable via handwheel Cutting capacity with a 370mm saw blade: Round 120mm - Square 100mm - Rectangle 180x100mm at 90° at 60°: Round 110mm - Square 90mm - Rectangle 90x100mm Miter cuts left up to 60° - right up to 45° Saw blade mount 40mm Saw blade speed 15-70 rpm 380 volts Tsdpfx Aowa Ecqsl Ajc Coolant pump Semi-automatic function: 1. Clamp the material 2. Saw starts 3. Lower at rapid traverse to the beginning of the material or cut immediately for serial cutting 4. Remove the saw blade 5. Raise the frame until just above the material 6. Open the clamping jaw

Condition: used, Gehrungs cold-cut circular saw machine MEP Type Tiger 350 CNC FE Factory No. 00011818 Year of manufacture 1995 Cutting range at 90° round: Ø 115 mm Cutting range at 90° rectangle: 180 x 95 mm Cutting range at 45° round: Ø 110 mm Cutting range at 45° rectangle: 125 x 95 mm Cutting range at 30° round: Ø 90 mm Cutting range at 30° rectangle: 90 x 95 mm Cutting range round: Ø 120 mm Rectangle: 180 x 100 mm Vise opening: max. 185 mm Saw blade diameter: 350 mm Miter cut: 60° left to 45° right Saw blade speed: 15 / 30 / 45 and 90 rpm Motor power: 1.8 and 2.6 kW Tjdpfjzrpl Dox Al Aec Mains connection: 400 Volt, 50 Hz Compressed air requirement: 6 bar - CNC control for up to 80 different cut lengths with corresponding quantities ???? - CNC control, cut length and quantity programmable - hydro-pneumatic saw head lowering - pneumatic material clamping - pneumatic material support - jaw feed with servo drive and ball screw - feed stroke programmable up to 9999 mm - 2 gear stages and 2 motor speeds - coolant system in the machine stand Space requirement L x W x H: 2000 x 1100 x 2030 mm Weight: 650 kg Good condition

Condition: used, Year of construction: 1995, Eisele VMS 300 Metal Cold Circular Saw Vertical metal cold circular saw (manual) Eisele Type/Model VMS 300 Condition Used Year of Manufacture 1995 Technical Data Saw blade diameter: Ø 275 mm up to max. 300 mm Saw blade speed: 40 / 80 rpm (2 speeds for steel / stainless steel) Cutting capacity: 90° (round) max. Ø 90 mm (with Ø 300 blade up to 100 mm) Cutting capacity: 90° (square) max. 75 x 75 mm (up to 82 x 82 mm) Cutting capacity: 90° (flat) max. 120 x 75 mm (up to 160 x 82 mm) Cutting capacity: 45° (round) max. Ø 90 mm Cutting capacity: 45° (square) max. 75 x 75 mm Cutting capacity: 45° (flat) max. 80 x 75 mm Motor power: 1.0 / 1.4 kW (pole-changing) Connection voltage: 400 V / 50 Hz Machine weight: approx. 210 to 300 kg (depending on the base) Space requirement (L x W x H): approx. 700 x 750 x 1,600 mm Equipment - Integrated coolant system - Miter adjustment Todpfxozymc Ns Al Asc Inquiry item: Transportation costs in a separate offer.

Condition: used, Year of construction: 2021, saw blade diameter 370x32x3 mm 15-150 U/min vice 190 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 180x100 mm 115 mm 90 mm Todsyvvpaopfx Al Aoc 90x90 mm 115 mm 100 mm 120x100 mm 115 mm 100 mm 120x100 mm total power requirement 5,5 kW weight 615 kg Overall size 1400x1400x2000 mm

Condition: used, Year of construction: 1990, functionality: unexamined, total length: 1,050 mm, total height: 2,000 mm, total width: 1,800 mm, overall weight: 550 kg, space requirement height: 2,000 mm, space requirement length: 1,050 mm, space requirement width: 1,800 mm, -KOM 3178- Here, we offer a fully automatic metal saw from the manufacturer MEP. The saw is in good optical condition. In addition to the automated operation, the saw can also be operated manually. The maximum clamping width of the workpiece is approximately 150 mm. The recommended saw blade diameter varies, depending on the profile, between 315 and 350 mm. Manufacturer: MEP Type: Tiger 350 AX Tsdsyykivspfx Al Ajc Total weight: approx. 550 kg Space requirements: Width: approx. 1800 mm Height: approx. 2000 mm Depth: approx. 1050 mm

Condition: good (used), Machine is in good working condition. Tjdsqzypmjpfx Al Aec

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, saw blade diameter: 120 mm, O F F E R We can offer you the following ex stock, subject to prior sale and errors excepted, without obligation: EISELE Vertical cold circular saw with mitre cut Type VMS II – 350 PV Year of manufacture 2010 _____ Todpfeyub N Uox Al Asc Max. saw blade diameter 350 mm Saw blade speeds 40 / 80 rpm Workpiece diameter 90 mm Swivel range of saw table 0 – 90 degrees Continuously adjustable pneumatic feed 0 – 10 (?) Approx. weight 350 kg Features: • Adjustable workpiece length stop, mounted on the right - Max. adjustable length: 500 mm • Pneumatic workpiece vice – clamping width 160 mm • Minimum quantity coolant system (MMKS) for saw blade • Adjustable depth stop

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Year of construction approx. 1980 Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Sawing range for 90° square 95 x 95 mm Todpfxoquzd Rj Al Aoc Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45° - Material vice with quick-release eccentric lever - Coolant device with electric coolant pump - material stop 350 mm - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition

Condition: used, Kaltenbach saw, cutting machine, mitre saw, metalworking circular saw, used machine Tsdjyfnpiopfx Al Aoc Manufacturer: KALTENBACH Model: KKS Machine No.: 21139 Electrical specifications: 400 V Weight : 1200 kg aprox. Cutting speeds (blade peripheral speed): Z59 tooth count: • 1st gear: 17 m/min • 2nd gear: 34 m/min Z72 tooth count: • 1st gear: 14 m/min • 2nd gear: 28 m/min Z90 tooth count: • 1st gear: 11 m/min • 2nd gear: 22 m/min

Condition: used, Year of construction: 2004, cutting diameter 120 mm saw blade diameter 370 mm vice 190 mm capacity 90 degrees: flat 180 x 95 mm capacity 45 degrees: round 110 mm capacity 45 degrees: flat 125 x 95 mm capacity 60 degrees: round 90.0 mm capacity 60 degrees: flat 90 x 95 mm dimensions of saw-blade 370 x 32 x 2,5 mm cutting speed 15 - 150 m/min engine output 3.0 kW weight 640 kg range L-W-H 900 x 1500 x 1910 mm New price ~ 16.000 euros - in checked condition - machine video - ?v=gxj5GWtTcDE Furnishing : - semi-automatic vertical metal circular saw - with miter adjustment 60 ° left / 45 ° right - swiveling control panel, front left - The saw head slides on linear double guides - pneumatic vice clamping - pneumatic saw blade feed, stepless - Infinitely variable speed adjustment from the saw blade - 2x replacement saw blade - Machine frame with coolant device - Operation manual Todpfx Aoxabrxsl Ajc

Condition: ready for operation (used), Year of construction: 1980, Saw blade diameter: 400 mm Cutting capacity at 90° round: 120 mm Rectangular: 200 x 80 or 150 x 70 mm Mitre cut at 45° rectangular/flat: 150 x 70 mm Upright: 100 x 60 mm 2 cutting speeds via pole-changing motor: 19 and 28 m/min Feed rate hydraulically infinitely adjustable: 0 - 1000 mm/min Drive motor: 380 V, 1.7/2.6 kW Tjdpfex Anl Dex Al Asc Weight: approx. 850 kg Required space: 1200 x 1100 x 1620 mm

Condition: good (used), Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, cold circular saw metal circular saw type TRL 300 pivoting on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 315 mm -Cutting area at 90 degrees flat: 110 x 70 mm Tjdpjxlzytjfx Al Aec -Cutting range at 45 degrees: 100 mm -Accessories: incl.2 saw blades, see photos -Dimensions: 1230/630/H1800 mm -Weight: 273 kg

Condition: excellent (used), Year of construction: 2012, KASTO circular saw, type: radial M6, year of manufacture 2012 In very good condition, like new. Barely used. Todpfxjwah E Us Al Aoc Cutting range: Circular max: 90 mm Cutting speed: 26/53 m/min Saw blade: 315 x 2.5 x 32 mm Coolant system. Weight approx. 210 kg. Machine documentation available. For further information, see data sheets.

Condition: excellent (used), Year of construction: 2013, Used automatic band saw MEP SHARK 310 CNC HS Blade dimensions: 4640x34x1.1 mm Variable blade cutting speed: 15–115 m/min Cutting capacity: round 310 mm, square 310x310 mm Automatic blade tensioner Tedpfx Aloyyuxno Aec Automatic chip conveyor Additional equipment: vertical vise Machine weight: 2200 kg The machine is in excellent condition and will be fully inspected and serviced.

Condition: good (used), Year of construction: 2002, Saw blade diameter: 350 mm Cutting capacity: Tjdpfx Aloy Uv Its Aec Round: 120 mm Square: 100 x 100 mm Rectangular: 170 x 100 mm 2 saw blade speeds: 34/68 rpm Drive motor: 380 V, 2/2.6 kW Weight approx.: 300 kg Space required approx.: 800 x 700 x 1770 mm

Condition: used, Sawing Machine, Industrial Circular Metal Saw, KALTENBACH Professional Industrial Circular Metal Saw with Complete Infeed and Outfeed Roller Conveyors, Used Machine Manufacturer Hans Kaltenbach Maschinenfabrik KG (Lörrach, Germany) Model TL 400 Serial Number 30973 Item Number 7081 Technical Specifications Applicable Saw Blade Size: 9.5 × 1050 mm Tsdpfx Alezcxius Ajc Suitable for: HSS (High-Speed Steel) saw blades Carbide-tipped saw blades Integrated Cooling and Lubrication System: Equipped with a coolant pump and spray nozzle unit for blade lubrication and cooling during cutting operations. Overall Dimensions Width: 6420 mm Depth: 1000 mm Height: 1720 mm Roller Conveyor Dimensions Infeed Roller Conveyor Width: 3000 mm Depth: 300 mm Height: 1010 mm Outfeed Roller Conveyor Width: 2410 mm Depth: 300 mm Height: 1010 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, saw blade diameter: 315 mm, IMET SIRIO 315 circular saw with 3 m roller conveyor on the loading side and 3 m electronic stop on the unloading side Tedpfx Ajwzhnljl Aec

Condition: used, Year of construction: 1998, saw blade diameter 350 mm cutting diameter 110 mm capacity 90 degrees: flat 180 x 85 mm capacity 45 degrees: round 105 mm capacity 45 degrees: flat 130 x 85 mm capacity 60 degrees: round 105 mm capacity 60 degrees: flat 90 x 85 mm turning speeds 9-18-36-74 U/min vice max. 180 mm Control IMET CNC total power requirement 1.5 / 2.2 kW weight 710 kg range L-W-H 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. Choosing the right tooth pitch is decisive for the optimal use of metal circular saw blades. For the material cross-section to be machined in connection with the material quality. Furnishing: - CNC fully automatic / vertically guided metal circular saw - swiveling CNC control, front left * Entry of parameters such as quantities and material lengths - Precision prism guide of the gear head, laterally adjustable - Hydro-pneumatic control of the saw unit - with automatic material feed & quantity specification * electro-pneumatic material feed unit - Smooth-running, powerful worm drive * with large transmission ratio - with miter adjustment via large turntable - continuous saw blade lowering - pneumatic material clamping - Stable base with built-in automatic cooling and large chip drawer Tjdpfx Aexabzyel Asc - Micro spray device for stainless steel cuts (untested) - Safety device for feed device (hood) - Saw blade guard - User manual (PDF) * Machine link : ?machineno=1008-9164086

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, saw blade diameter: 370 mm, CNC Mitre Circular Saw Full-Automatic with Microprocessor Control Details: - Frequency-controlled saw drive: 13-73 rpm - Modern microprocessor control - Max. saw blade Ø up to 370 mm - Mitre angles: 60° left and 45° right - Large chip drawer - Vise with double clamping arm for burr-free cuts - Vertical clamping cylinder - Automatic cooling with electric submersible pump Tsdpfxow Uftqj Al Asc Technical Data: Cutting range at 90°: Ø 120 mm or 180 x 100 mm Saw motor: 3.0 kW-400 V Working height: 925 mm Weight approx. 750 kg Air connection: 6 bar Dimensions (LxWxH): 3,300 x 1,250 x 1,400 mm Working height: 900 - 980 mm

Condition: good (used), Year of construction: 1987, Saw blade Ø: 400 mm Cutting range round: 130 mm Rectangular: 305 x 40 mm Mitre cut at 45° round: 130 mm Rectangular: 245 x 40 mm 2 cutting speeds via pole-switchable motor: 9 and 18 m/min Feed rate hydraulically steplessly adjustable: 0 - 1000 mm/min Saw drive: 380 V, 1.7/2.6 kW Weight approx.: 800 kg Space requirement without roller conveyor: 1100 x 1000 x 1900 mm Todex Ir Rwepfx Al Aoc

Year of construction: 1998, condition: ready for operation (used), Feed rate: 50-1000 mm/min, operating voltage: 3x 400 V, control voltage: 24 V, rated current: 12 A. On-site viewing is possible. Tedoyln A Nopfx Al Ajc

Condition: used, Year of construction: 2020, dimensions of saw-blade 350x32x4 mm Tsdpoyvvnpefx Al Aoc vice 180 mm 1700/3400 U/min capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm capacity 45 degrees: round 120/110 mm capacity 45 degrees: square 100/95 mm capacity 45 degrees: flat 135x60 mm output 2,2 kw weight 225 kg

Condition: excellent (used), Offered here is a heavy, well-preserved cold circular saw from the company Trennjäger. Data: Tjdpfxsg Rxh Dj Al Asc Saw blade: 275 x 2.5 x 40 T8 = Z110 Two speeds Angle adjustment: from 90°-0 Equipment: Hydraulic vice hydraulic feed (infinitely variable) Integrated coolant system