Used Cold Storage Evaporator for sale (10,593)

Condition: new, saw blade diameter 350 x 32 mm capacity degrees: round 1 mm capacity degrees: square 95 x 95 mm capacity degrees: flat 180 x 95 mm capacity degrees: round 110 mm capacity degrees: square 95 x 95 mm capacity degrees: flat 125 x 95 mm Njdpfx Aajxaab Sszslg capacity 60 degrees: round .0 mm capacity 60 degrees: square x mm capacity 60 degrees: flat x mm

Condition: used, Year of construction: 1996, saw blade diameter 300 mm cutting diameter 100 mm capacity 45 degrees: flat 105 x 80 mm capacity 45 degrees: round 100 mm capacity 60 degrees: flat 80 x 70 mm capacity 60 degrees: round 90,0 mm dimensions of saw-blade 300 x 2,5 x 40 mm hole of sawblade 40,0 mm stroke 150 mm cutting speed 17 + 33 U/min voltage 400 V weight 340 kg range L-W-H 1000 x 800 x 1600 mm Features: - Machine cabinet with built-in coolant system - Vertical saw head guide - 2 speeds - Very large work surface and turntable - Mitre adjustment on both sides: 60° to the left / 45° to the right - Clamping vise with lateral quick-adjustment and double clamping arm Nlsdpfx Aozl E Twsazjg - Precise prism guide for the gear head - Operatorâ??s manual

Condition: new, Year of construction: 2026, - Saw blade 400 mm Nodpfx Aasgg N Axozelg - Double mitre - 4 pneumatic clamps - Mist lubrication system - 300 cm roller conveyor with length stop - Blow gun - Protective cover - Documentation - 400V

Condition: good (used), Bibby 5000L Holding tank Nledpfxoyfhr Do Aazog 316 Stainless, 5000L holding tank, central bottom discharge with level sensor

Condition: good (used), Year of construction: 2005, functionality: fully functional, total height: 5,000 mm, Equipment: documentation/manual, safety light barrier, 7 Kardex vertical rotating storage units, models K1 to K7; 2 Kardex Shuttle vertical storage units, models K8 and K9; 6 Hänel Lean-Lift vertical storage units, models K10 to K15. K1 to K7 Kardex INDUSTRIEVER SYS 2512912-11, manufactured in the 1990s. Machine dimensions: height 5,400 x width 3,010 mm. Nlsdpfx Aaoz Dx Ntozeg 29 trays, usable dimensions: H 275mm x L 2,500mm x D 640 mm, load capacity 242 kg. K8 Kardex Shuttle 500-1650-863, year 1998, height 6,000 x width 1,980 x depth 2,975 mm, 29 trays, 450 kg/tray. K9 Kardex Shuttle 250-2850-635 NT, year 2003, height 5,028 x width 3,185 x depth 2,295 mm, 53 trays, 264 kg/tray. K10-K15 Hänel Lean-Lift 2450-825, year 2005, height 5,485 x 2,800 x 2,880 mm, 38 trays, 250 kg/tray. Plastic storage containers available.

Condition: used, total length: 5,300 mm, total width: 2,600 mm, total height: 30,003,500 mm, water tank capacity: 25,000 l, External dimensions: W 2600 mm, H 3000/3500 mm, L 5300 mm. Horizontal stainless steel tanks – 2 units. Manhole at the front 2.5" outlet at the end. Nlsdpfxewnn Aps Aazeg AISI 304.

Condition: good (used), Year of construction: 2003, Machine is in good working condition. Nlodpfxjz Egngs Aazog Parts shown by hand not come.

Condition: excellent (used), Year of construction: 2004, Type Loedige TSHK-160/KGU-400 Serial no. 3901 Year of manufacturing 2004 Hot mixer 210 liters Nlodpsvzzw Usfx Aazjg Cooling mixer 391 liters

Condition: used, Year of construction: 2015, functionality: fully functional, total height: 3,840 mm, total width: 4,200 mm, total length: 10,840 mm, overall weight: 73,500 kg, Oskar Frech GmbH & Co. KG Cold chamber die casting machine DAK 1600-133 and additional equipment The system is used for the production of die castings made of aluminum, magnesium, or copper alloys, which are manufactured using the cold chamber die casting process. Clamping force 16,000 kN Clamping stroke 1,200 mm Casting volume 3,014 – 12,057 cm³ Total weight of the system 73,500 kg Dimensions of the system Njdpfoz Eblajx Aazolg Length 10,840 mm Width 4,200 mm Height 3,840 mm The system is equipped with the following additional units: Metering furnace, manufacturer Westomat, type 1700 S, capacity 1,700 kg Mold release spray system, manufacturer Gerlieva, type GS 1600/1800 T Metering furnace, manufacturer Meltec AVDF 1800/10 K, consisting of an aluminum melting furnace and a vacuum metering unit. The entire system is designed to allow fully automated operation for die casting of workpieces when used in conjunction with automation components. All necessary interfaces for communication and monitoring are available. Oskar Frech GmbH & Co. KG is one of the leading manufacturers of die casting machines worldwide. The DAK 1600-133 is the largest machine in the smallest series currently manufactured by Frech. Automation of the die casting system, manufacturer Frech, type DAK 1600-133, using an automation cell, manufacturer Reis. These units are primarily used for removing the workpieces produced by the DAK 1600-133 die casting machine.

Condition: good (used), KARDEX SHUTTLE Type No.: XP-500-2450X13 Configuration: H/N55/N22D18B/N75D20/20 Permissible total payload: 2 x 33,200 kg Nlsdozr N H Ispfx Aazjg 28 compartments Approximate dimensions (W x H in mm): 2,770 x 7,000

Condition: good (used), KARDEX SHUTTLE Nlodpfx Aozr N Nijazeg Type No.: 250-1650x825-NT Permissible load: 2 x 10,000 kg 26 compartments Compartment load: 250 kg Dimensions W x H: approx. 2.00 x 4.90 m

Condition: used, Year of construction: 1988, Cylindroconical 965 hl fermentation and storage tank - designed for cooling with ammonia (can also be cooled with glycol), 1 x cone cooling, 3 x frame cooling - Swivel cone - stainless steel - insulated - Stand frame, short - Cleaning air fitting with safety valve - Vacuum valve 5 tanks, also available individually or in partial quantities. Njdsz Ek Tmopfx Aazslg Additional title: Outdoor tanks for storing fluids; years of manufacture 1988 - 1991 Capacity: 96450 l Operating pressure: 2 bar Length: approx. 12400 mm Width: approx. 3950 mm Height: approx. 3950 mm Weight: 6220 kg Material: Stainless steel 1.4301 Position: vertical Base construction: short supporting skirt Features: 7 tanks; Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination; safety valve; vacuum valve; temperature measurement

Condition: new, Year of construction: 2024, functionality: fully functional, Item: A-11297-Silostank 95m3 Exterior dimensions: Dia Ø 3300 mm Total H 11647 mm Stainless steel tank - 3 pcs. AISI 304 Outlet height 400 mm Top of the tank: Air in/outlet 500 mm with gauge Inside : polished weld Thickness of plates: Bottom: 4 mm, Cylinder : 4 and 3 mm, Top : 3 mm Njdoua U Hzepfx Aazslg Possible to choose color of outside plates if you need insulation.

Condition: good (used), Year of construction: 2010, Vertical sheet metal storage system, drawer-based sorting system for sheet metal, Hegla, 10 compartments for sheets 1.50m x 3m – used: Njdpfxjz Dtxis Aazjlg Price ex works: €4,500 (net)! Manufacturer: Hegla Type: SCH-SL-3 Year of manufacture: 03/2010 Maximum storage length: 3,000 mm Maximum storage height: 1,500 mm Number of compartments: 10 Load capacity: 500 kg per drawer (10 x 500 kg) Max. loading height: 1,500 mm Overall dimensions L x W x H: 3,250 mm x 1,590 mm x 1,950 mm Condition: good Available: immediately Location: 87719 Mindelheim

Year of construction: 2011, condition: good (used), Storemaster Regal, Master Tower SL 19, with double-sided pull-out and 6m crane – used: Price at location: €22,500 (net), disassembled and loaded Manufacturer: Storemaster Type: Master Tower SL 19 Year of manufacture: 2011 Max. possible load per drawer with uniform distribution: 1,200 daN Max. possible load per shelf block with uniform distribution: 60,000 daN Max. possible payload under the vacuum device attached to the 6m crane jib: 400 daN PROJECT NO.: 1101 AS 11459 TwenTower SL with 19 large-format drawers, each with a load capacity of 1.2 tons, filling height: 50 mm, Double-sided pull-out – continuous locking not possible, Pull-out roller guides in MasterTower® SL – Nlodpfez Dtu Rox Aazjg - Standard design with pivoting function OverheadTop with 5 large-format stacking bays, each with a capacity of 3 tons, Overall height: 4,135 mm (bridge crane height 3,500 mm!!!) Tower crane system-integrated for max. 400 kg sheet weight with a 6 m operating radius (from 350 kg sheet weight and fully electrified for safety reasons) ... manual version Additional cost for electric trolley for sheet weights ≥ 350 kg (large format 10 mm) Additional cost for electric crane arm swivel for sheet weights ≥ 350 kg (large format 10 mm) VacuMaster special for use with storemaster® drawer systems with a max. of 750 kg storemaster heavy-duty drawer rack system: MasterTower SL 19 (TwenTower base) Surface: Frame zinc-plated and drawers painted according to NCS-S6500-N (dark gray) Item in stock Drawing No.: 1 shelf block for large-format sheet packs, consisting of: 2 side walls 2,200 x 1,785 x 1,000 + welded top plate 220/100/10 19 welded rails in a 100 mm grid 4 side doors made of HEB100x2 200x1,535x650 with hinges 1 top beam pair: front 1x HEB 180 x 3,730 mm rear 1 x IPE 180 x 3,810 mm each with 4 supporting deep-web girders IPE 80 x 1,500 mm 1 frame extensions: 1,500x1,785x3,810 front 2 x HEB 140 x 1,500 (with 1,500 -C85SL length) rear 2 x IPE 180 x 1,500 (with 1,500 -C85SL length) each with 4 supporting deep-web girders IPE 80 x 1,500 mm 3 bracket beam levels IPE 120 x 1,100 with flange plate incl. end face each with 4 connecting bolts (1 piece per bracket arm shoe) each with 2 attached head-deep girders UNP 120 x 1,714 mm each with 2 insert deep girders IPE 80x 1,572 mm 1 top beam pair front 1x HEB 100 x 3,730 mm rear 1 x HEB 100 x 3,810 mm each with 4 supporting deep-web girders IPE 80 x 1,500 mm 19 drawers St-rollers UNP 80 x 3,300 x 1,750 (H*W*D) with ryt gf tiv 080 43 6 recessed deep-web girders QR 40/4, 3 mm from UK 1 tower crane, with electric rotation, electric travel and electric lifting, consisting of: a crane column QR 140/14 x 3,740 mm long (mounted on the right side), a pivoting crane 6,000 mm nominal length x 225° x 500 kg 1 VacuSheet - vacuum lifting device x 750 kg 1 machine nameplate 1 operating manual VacuMaster Basic and VacuMaster Comfort Technical data Due to its modular design, the VacuMaster Basic and VacuMaster Comfort can be individually configured for any application. The technical data of the device depend on the chosen configuration. Below, you can determine initial technical parameters for your VacuMaster based on preconfigured lifting devices for standard workpiece formats. Here's how to proceed: 1. Select the type of handling: e.g. Horizontal handling 2. Select the maximum load capacity: e.g. 250 kg 3. Select the workpiece format: e.g. 2,000 x 1,000 mm Condition: good Available: immediately Location: 87719 Mindelheim

Condition: used, Length of infeed table: 6000mm, length of outfeed table: 4150mm, length: 2340mm, width: 1220mm, height: 1780mm, with saw blades as accessories and documentation, was not regularly maintained, without maintenance reports, no known defects. Nsdoz D S Dwopfx Aazjlg

Condition: used, Length of infeed table: 6000mm, length of outfeed table: 4300mm, length: 2400mm, width: 1300mm, height: 1800mm, with saw blades and length stop as accessories and documentation, was not regularly maintained, without maintenance reports, no known defects. Nlsdpfx Aaoz D S D Dozsg

Condition: used, Year of construction: 2019, Overview This lot comprises two VIG pressure tanks of 5,000 litres each, built in 2019 by VIG Vertrieb Industrieller Güter (Kreuztal, Germany). The vessels are CE-marked pressure vessels according to EC pressure equipment directive 2014/68/EU and were last used as activated carbon filters in a brewery’s water treatment. Each tank is fitted with a filter star; the filter candles show light damage. The tanks are interconnected with DN 65 piping and come with butterfly valves for cleaning, draining and shut-off as well as vacuum/check valves. With their young year of construction and availability as a pair, the vessels suit filtration and pressure-holding duties in breweries and beverage plants alike. Technical data - Manufacturer: VIG Vertrieb Industrieller Güter (Kreuztal, Germany) - Year of manufacture: 2019 - Number of tanks: 2 - Volume: 5,000 l per tank - Max. operating pressure (PS): 6 bar - Test pressure (PT): 7.8 bar - Operating temperature (TS): 0 - 50 °C - Pressure vessel per EC directive 2014/68/EU, CE-marked - Front manhole on each tank Equipment - Filter star with filter candles in each tank (candles with light damage) Nedpfx Aaszpaiuszelg - Interconnecting piping DN 65 - 3x M&S butterfly valves (cleaning, draining, shut-off) - 2x vacuum / check valves Condition Used - good overall condition in line with the young year of construction. The filter candles of the filter stars show light damage. The tanks are installed indoors. Availability Immediately. Location: Germany.

Condition: used, Year of construction: 2016, Overview  This rotary cold-glue labelling machine was manufactured in 2016 by Germany KRONES. The machine is designed for high-speed beverage bottling lines and is equipped with three cold-glue labelling aggregates for front, back and neck labels. The machine is used and still under power. Technical data - Capacity: approx. 33,000 bottles/hour - Formats: - 0.75 GDB DN2 - 0.5 L longneck beer - 0.33 L longneck - 0.25 L individual bottle - Application: Cold-glue labelling of beverage bottles - Configuration: 2.400-40-188.5, 3 cold-glue labelling aggregates Nedpfx Ajzhaadeazslg - Label positions: Front, back, neck - Integrated systems: Domino coding system, Krones Checkmat 731 inspection system, Plasmatreat for seal label

Condition: used, Year of construction: 2012, Overview The labeler was manufactured in 2012 by the German manufacturer Krones. The machine was regularly maintained by OEM and is still in operation till early 2027. As the selling mineral water company is receiving a completely new bottling line, they are selling the used machines of their current line, which are still in good shape. With the two labelling stations, the machine can label front, back and neck. A date coder is included and installed on the machine. Technical Details Nsdpozb Afdofx Aazelg - Output: 20,000 bph - Formats: 0,25l Vichy 0,5l 0,7 and 0,75l GDB and Schlegl - Pitch circle diameter: 600 mm - No servo drive of the plates - Infeed and output direction 90° - Rotation: counter clockwise - 36,000 operating hours - Glue pumps included - working direction: counter clockwise

Condition: used, Year of construction: 2020, Overview  This labelling machine was manufactured in 2020 by Gernep. The machine is designed for labelling applications in the juice industry. The machine is currently still installed and under power and can be visited on request. Technical data - Capacity: 10,000 bph - Application: Juice - Configuration: Gernep Labetta 4/3/10 640 2A - Labelling technology: Cold glue / Rollina - Labelling stations: 2 × cold glue aggregates - Bottle Formats - Container type: Glass bottles (fruit juice) - Typical formats: - 1.0 L VDF (H=307 mm, Ø90 mm) - 0.5 L NRW (H=260 mm, Ø68 mm) Nljdpfx Aezazkvsazjg - Special capability: - Suitable for hot-fill applications - Label Data - 1st cold glue station: - Label length: approx. 25 – 140 mm - Label height: max. 150 mm - Lower edge: max. 15 mm - Upper edge: max. 320 mm - 2nd cold glue station (incl. wrap capability): - Label length: approx. 25 – 140 mm - Up to 170° wrap-around of bottle circumference - Label height: max. 150 mm - Lower edge: max. 15 mm - Upper edge: max. 220 mm - Applications: - Body label - Front (chest) label - Back label

Condition: used, Year of construction: 2000, Overview These HERPASA self-emptying stainless steel tanks, designed as 30,000 liter autovaciante tanks, are suitable for wine production and similar beverage processing applications. The tanks are installed as a group of vertical stainless steel vessels and are equipped with bottom cone discharge systems for efficient product emptying and solids handling. The tanks are manufactured from AISI 304 / AISI 316 stainless steel and feature a 45° bottom cone, rectangular access doors, cooling jackets, temperature monitoring, product connections, and an internal mechanical extraction / rotating discharge system. The available drawings and photos show a robust industrial tank configuration with cooling surfaces, lower discharge equipment, and external piping for wine circulation or transfer. The tanks are particularly suitable for applications such as fermentation, storage, cooling, wine processing, and controlled product discharge, especially where self-emptying functionality is required. The visible installation includes at least four tanks of similar construction. Technical Data - Manufacturer: HERPASA - Year: 2000 Nledpsy Uc A Rsfx Aazeg - Tank Type: Self-emptying vertical tank / autovaciante tank - Application: Wine / beverage processing - Capacity: 30,000 liters - Material: Stainless steel AISI 304 / AISI 316 - Tank Diameter: approx. 2,800 mm - Total Height: approx. 7,050 mm - Bottom Cone Angle: 45° - Cooling System: Upper and lower cooling jackets - Upper Cooling Jacket Surface: approx. 8.35 m² - Lower Cooling Jacket Surface: approx. 4.4 m² - Cooling Jacket Connections: R 3/4" water inlet / outlet - Temperature Measurement: Thermometer, range 0 to +60°C - Probe Connection: R 1/2" sleeve - Discharge System: Bottom discharge with extraction system - Internal Equipment: Rotating wine diffuser / internal extraction or sweeping mechanism - Access Doors: Rectangular manways / inspection openings - Connections: NW50 and NW65 product connections - Safety Equipment: Safety valves 2 1/2" - Installation: Group of vertical stainless steel tanks with external pipework - Condition: Used, installed in industrial winery environment

Condition: used, Year of construction: 2008, Overview: The ENOS Eticap is a fully automatic labelling machine designed for the application of wet-glue labels on cylindrical bottles. Built by the Italian manufacturer ENOS and delivered in 2008, the system was used in production until 2020 and has since been taken out of service and stored. The machine is equipped with two wet-glue labelling units: one for front and neck labels and one for back labels. The conveyor system supports left-to-right operation. Technical Data:  - manufacturer: ENOS, Italy Nledpsy Scb Ijfx Aazjg - model: Eticap - year of manufacture: 2008 - labelling Heads: 2 (wet-glue heads) - Head 1: front and neck labels - Head 2: back labels - operation Direction: Left to right - production Capacity: 4.000/h - adjusted for: cylindrical glass bottles - 0,7 L = Ø75mm - 1,0 L = Ø86mm - condition: Stored off-line since 2020, machine in a good condition - actual label sizes:  - front label: 131mm height, 77mm width - back label: 114mm height, 66mm width

Condition: used, Year of construction: 1994, Overview These 2 isobaric pressure tanks (150 hl each) manufactured by TMCI Padovan in 1994 originate from the wine industry and were previously used for sparkling wine production. Designed with a full cooling jacket and pressure resistance up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated products, including beer, sparkling wine, and similar beverages. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, representing a widely used technology before stainless steel tanks became the industry standard. They offer a cost-efficient alternative to stainless steel vessels, especially for operations with lower investment requirements. Each tank is fully insulated and equipped with a complete cooling jacket, allowing temperature-controlled processing. As with all epoxy-coated vessels, periodic renewal of the internal coating is required depending on usage and product conditions. TECHNICAL DATA Nsdsy Hknxspfx Aazslg - Manufacturer: TMCI Padovan - Year of Manufacture: 1994 - Quantity: 2 units - Type: Isobaric pressure tank with full cooling jacket - Application: Fermentation, maturation, storage of carbonated beverages - Capacity: 150 hl per tank - Material: Base: Carbon steel Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding - Pressure Rating: 6 bar - Dimensions (per tank): Outer Diameter: approx. 2,400 mm Cylinder Height: approx. 4,000 mm

Condition: used, Year of construction: 1992, Overview These 4 isobaric pressure tanks (200 hl each) manufactured by TMCI Padovan in 1992 originate from the wine industry and were previously used for sparkling wine production. With their full cooling jacket design and pressure rating of up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and related products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, a technology widely used before stainless steel became the industry standard. They represent a cost-effective alternative to stainless steel tanks, particularly for producers seeking lower capital investment. Each tank is fully insulated and equipped with a complete cooling jacket, enabling controlled temperature processes. Due to the coating system, regular inspection and renewal of the epoxy lining is required, depending on usage and product type. Technical Data - Manufacturer: TMCI Padovan - Year of Manufacture: 1992 - Quantity: 4 units - Type: Isobaric pressure tank with full cooling jacket - Application: Fermentation, maturation, storage of carbonated beverages - Capacity: 200 hl per tank Nlodpfx Aoy Hkl Deazsg - Material: Base: Carbon steel Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding - Pressure Rating: 6 bar - Dimensions (per tank): Outer Diameter: approx. 2,200 mm Cylinder Height: approx. 7,000 mm Total Height: approx. 9,000 mm