Used Cold Water for sale (7,807)

Year of construction: 2001, condition: used, The Pall CFS system is designed as a single unit and can be installed directly in front of the filling line without the need for a buffer system. It is a completely independent process unit consisting of the following components: filter vessel Piping and connections Membrane cleaning system (CIP) integrity check Switchboard The hygienic design, the simple integrity test and the full automation ensure the microbiological safety of the system and usually allow the operation of the filling staff. Cluster filtering groups filter elements into clusters. Each cluster has its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization and integrity testing are performed per cluster. Advantages of the CFS principle; Longer life Integrity testing on site Integrity diagnostics per cluster Special rinsing High specific flow rate Short flush times Constant flow in all candles Minimal water consumption Quick replacement of filter elements Controlled backwash Minimal beer loss High biological safety Constant availability With this filter system only preclarified products may be filtered, which have normally filterable properties in their composition. Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Voltage: 220 V Kljdpevcqx Dsfx Abvjp Water: cold water: min. 150 hl/h; hot water (max 65 ° C): min. 150 hl/h Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Length: 1,40 m Width: 1,20 m Height: 1,85 m Weight: 3450 kg Base construction: basic frame with control and measuring components and filter container; cleaning module Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

Year of construction: 1995, condition: used, This filter system may only be used to filter preclarified products that have normal filterable properties in their composition. Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Klsdpfxevcqv Ns Abvsp Voltage: 220 V Water: cold water: min. 150 hl/h; hot water (max 65 °C): min. 150 hl/h Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Weight: 3450 kg Base construction: basic frame with control and measuring components and filter container; cleaning module Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

Year of construction: 2013, condition: used, Water degassing module. Suitable for integration into existing control systems. Additional title: cold degassing Capacity: 50 hl/h Residual oxygen content: 0,03 mg/l Column volume approx.: 300 l Kedpovcqqtjfx Abvjlp Operating temperature: 95 °C Operation / Control: PLC / visualization by customer Material: Stainless steel 1.4301 Base construction: Height-adjustable feet Features: Two-chamber column; water pump; panel

Year of construction: 1999, condition: good (used), For sale is a water treatment plant of make ENVOTECH and type 0320 from 1999. In 2016 a new reaction tank of the brand Leiblein, made of stainless steel, with the dimensions of 500*500*400 mm was added. The plant is fully functional and the contact details of the competent service technician are available and can be forwarded at the time of purchase. Technical data & information: - Executed in stainless steel - Including oil separation by coalescence principle - Including automatic cleaning - Built-in pump for waste water, concentrate and distillate - Frequency control of the compressor motor - Type: 0320 - Rated capacity l/h: 320 Energy consumption Kledopl Tqtspfx Abvjp - In operation: 25 kW - Maximum power: 35 kW Supply voltage: 3*400 V - 50 Hz Dimensions lxwxh: 245x155x265 Face: ca 2600 kg Sound pressure level: 75 dB All data refer to operation with water On request, loading and shipping can be organized throughout Europe. Prices plus VAT Viewing by appointment possible. Contact us, our team is happy to help you. Ch3mj0l3eg Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Year of construction: 2026, condition: new, Mobile cleaning centrifuge including buffer storage for dirty water, agitator and double membrane compressed air pump. - new machine - Numerous other variants and special designs on request. Machine type: Process water centrifuge solid-liquid Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: vibratory finishing technology, general solid-liquid separation, cooling lubricant processing, wet blasting systems, ... Benefits: - High discharge through acceleration forces acting in the system of over 1800 times the acceleration of gravity - Management of the process water in a circuit, which minimizes operating costs and protects the environment - Saving of expensive additives for the vibratory grinding process (compound) - Economical and efficient separation of solid particles from a mixture - Suitable for process liquids up to 70 ° C (optional cooling available) - frequency-controlled motor drive for smooth acceleration and braking of the rotor Are you looking for innovative solutions for surface treatment and process water treatment? We offer a wide range of systems in the field of vibratory grinding, drying and process water technology, which are precisely tailored to your application. Kodpfxef Sqfqe Abvelp From development to production: We deliver all of our products from a single source and everything is "Made in Germany". ----- Please just contact us, we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Year of construction: 2002, condition: used, Vertical circular saw Make : Berg + Schmid Model : VKS 370 A year of construction : 2002 Kodpfx Aomu Al Aobvslp used Technical data: Cutting range saw blade 350 mm 90° round 110 mm/square 85x85 mm/ flat material 180x85 mm 45° Re round 105/square/85x85/ Flat material 130x85 mm 45° Lks round 110/square 85x85 mm/ Flat material 130x85 mm 60° round 105/square 85x85/ flat material 90x85 mm max. saw bladeØ 370 mm speeds 2 speeds 15-70 rpm. motor power 1,5/2,2 kW 400 V dimensions: WxDxxH 1800x1200x2100 mm Weight without coolant 710 kg Accessories: Coolmatic incl. short roller conveyor 1000 mm

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total height: 3,100 mm, total width: 3,100 mm, stroke length: 950 mm, column diameter: 130 mm, mold height (min.): 900 mm, clamping force: 35,000 kN, pressure: 400 bar, Installed and commissioned with dry, test run only. - Two‑platen machine - Max locking force: 35,000kN - Injection force: Approx. 390–420kN (varies by plunger size) - Plunger diameter: Ø130mm - Plunger stroke: 950mm - Shot weight (Al): 6.5–8.5kg, depending on plunger - Projected area at 400 bar: 8,750–9,000cm² (calculated from 35,000kN clamping force) - Platen size (H × W): 3100× 3100mm - Distance between tie bars (H × W): 1950×1950mm - Die height (min / max): 900/1350mm Ksdpeygxr Rjfx Abvelp - Die opening stroke: 1200mm Støtek melting system with - Støtek SMG 3.0_7.0 two chamber gas fired melting shaft furnace with ingot charging elevator, furnace melting capacity approx. 1.5t/h - Støtek DTI 6020 holding furnace with Fuco-Heg MBS 2000 molten metal treatment/rinsing station - Støtek AMET 1700 dosing furnace LK Impress Plus DCC 3500 die casting machine with - Siemens PLC S7-1500 controls - ABB IRB 6650S die release agent spray robot - Wollin OSA 15-2-C die release agent supply system and spray head - AED 181-080 die lubrication dilution system - Fondarex Highvac Premium 2C 200 die casting vacuum system with air tank and vacuum pumps - 5x IECI PFN 330 2-Z oil temperature control units - 5x IECI PF-ZH 1802-Z water temperature control units - KMA Ultravent UV 20000EE fume extraction and filter system - ABB IRB 7600 robot for die casting machine unload, trim press load/unload and cooling station load - LK WB-100 1,000kN trim press with trim conveyor - ABB robot for cooling station unload, laser marking and outfeed - Keyence MD-X 1500C 3 axis laser marking system - Outfeed conveyor with cooling tunnel A quantity of spare parts is available with the line.

Condition: excellent (used), Motan DH-1 N-A/B instantaneous water heater, loadable You are buying a functional Motan instantaneous water heater. The device comes from Bundeswehr stocks and is in very good condition. Versatile in use, e.g. as a pool heater The bestseller for heating swimming pools in no time at all. A 100 m³ swimming pool heats up to 30 C in 3 hours. There is no quicker way to heat water. Perfect for use wherever there is no electricity. Tent camp, weekend house, building site, camping. Its effective output is infinitely variable from 40.5 kW to 128 kW. Despite its high output, the appliance is still portable at a weight of 130 kg. As the water temperature can be set anywhere between 30°C and 90°C, the appliance is can be set as required, the appliance is very versatile, e.g. as a hot water generator for camp showers, for hot water production. Also perfect for koi facilities and koi ponds. Technical data: Output: 35000 kcal/h to 110000 kcal/h infinitely variable (40.5 kW to 128 kW) Largest water volume: approx. 3600 l/h of water at maximum heat output. At max. water flow, the temperature increase is approx. 30°C, i.e. at 10°C. Water flow temp. and 30°C Increase = 40°C Final temperature Drive: Petrol engine Fichtel & Sachs, Stamo 75 Displacement: 75 ccm Power: 2.5 hp at 4500 rpm Consumption: approx. 1.8 l/h mixture 1 : 25 (for the engine!) For the burner depending on the amount of water max.: 24l/h gasoline with max. flow rate of 3600 l/h Tank capacity: 5 liters Dimensions Width: 500 mm, length: 1040 mm, height: 850 mm Weight: approx. 130 kg Manufacturer's price: 8000,-€ You can find more items - new and used - in our store! Kledpfx Ajulgh Nebvep International shipping costs on request!

Year of construction: 2023, condition: excellent (used), Flowtech Flowboost 2V JH1 water pump system with tank 2023, Two station pump unit with flow meters, 0.9Kw rating per pump, with 6000l insulated tank 2100mm x 2100mm x 1500mm, pumps in housing, 3Ph Ksdpsulianjfx Abvelp

Year of construction: 2014, condition: good (used), Cryovac STE96-600 hot water shrink tunnel Serial: SN00422 2014, Stainless hot water shrink tunnel, steam, belt dimensions 1300mm x 600mm, max product height 220mm, HMI touch screen control, 3Ph Kjdpfx Aemx Sknjbvelp

Condition: like new (used), Year of construction: 2023, x-travel 4216,0 mm y-travel 2007,0 mm z-travel 305,0 mm control CNC table-size 4902,0 x 2134,0 mm max. workpiece weight 1465 kg / m² machine weight ab. 2500 kg total power requirement 30 kW Kodsyclvnepfx Abvjlp dimensions of the machine ca. 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel high-pressure pipes - MAXIEM direct pump M4050 - OMAX Intelli-MAX PC control software for MAXIEM - OMAX PC control software Intelli-MAX Premium - Cutting head technology based on the A-Jet 5-axis angular cutting head - Height sensor for the A-Jet 5-axis angle cutting head - Laser pointer as a positioning aid - Automatic desludging system MBM ASAS-ME - Compressed air injection for the MBM ASAS-ME automatic desludging system - Clamping and fastening set for sheet material and material holders - Collecting grid in the cutting basin - Sensors for automatic monitoring of the cutting process - Water treatment through water conditioning incl. water analysis - Omni-Start drilling aid (Vacuum Assist) for brittle and laminated materials

Condition: new, Year of construction: 2025, neu 2025 060103 prompt, Zwischenverkauf v Türkei 7500 € 121.59 € 1 6300 € 350 mm 350x32x63 mm 45 / 80 U/Min Klodowmf Uaepfx Abvep 45 ° 45 ° rund 115 mm / quadratisch rund 110 mm / quadratisch rund 110 mm / quadratisch 1,8 / 2,2 kW 1100 mm 1000 mm 1400 mm 300 kg Semi-automatic circular saw designed High production rates, ideal for small and mid production Heavy duty gearbox Cast iron structure Foot switch actuation Hydro-pneumatic operation of saw head smoothes descent for optimum cut Pneumatic vice 2 cutting speeds Adjustable head stroke according to the dimensions of the material which has to be cut Piece counter 45° right to 45° left cutting saw blade not included OPTION: saw blade Dm. 350 mm € 180,00

Year of construction: 2015, condition: repair required (used), functionality: limited functionality, total length: 13,000 mm, total width: 4,520 mm, total height: 2,550 mm, machine/vehicle number: 201507-025, WATERJET CUTTING MACHINE & BONDING STATION: The system is part of a larger production line; please also refer to our other listings. In this offered system, EPS/XPS raw panels (manually loaded in the feed magazine) are bonded end-to-end into a continuous strand. Subsequently, formatting is carried out with the waterjet cutting machine, including cut-outs and groove milling. An ejector station and belt conveyor at the end of the line are also included in the scope of supply. RAW MATERIAL DIMENSIONS: Length: 1500mm - 2500mm Width: 600mm - 1250mm Height: 20mm - 50mm WATERJET CUTTING MACHINE: cut Expert variojet (Manufacturer: expert international GmbH, formerly expert systemtechnik GmbH) Klsdpfsytp U Ajx Abvep INCLUDES: Adhesive unit (Nordson), milling spindle (Jäger)

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 35 h, functionality: fully functional, Waterjet cutting system 1020 EcoCube 2D Demonstration system, fully serviced, tested and ready for operation, Maximator JET certificate Availability: within one week High-pressure pump: optional after consultation and availability, e.g. SERVOTRON 40.45+, year of manufacture 2018, complete Maximator JET retrofit Year of manufacture of cutting table: 2022 Operating hours of cutting table: 35 h • Effective cutting area 1,000 x 2,000 mm • CNC control NUM FLEXIUM • Z-axis CNC clear height 100 mm with Quick-UP • Automatic height sensing and collision protection • Laser for position determination • LED work area lighting • Cutting valve including abrasive cutting head • Ergonomic control panel • HP operator PC with 20 inch LED screen, splash-proof keyboard and Mouse • Water jet software SmartCut powered by IGEMS • Abrasive dosing unit CNC with intermediate container • Abrasive storage container 450 kg with mini hopper pressure conveying system • High pressure connection between pump and cutting head • Safety system with automatic lifting door • Stop edge in X and Y • Guarantee 1 year or 2,000 operating hours Price ex works plus VAT €125,000 Additional services  2D training, system operation for up to 4 people on site at the customer's premises, 2 days €2,400  Installation and assembly up to 400 km one way, 2 days €2,400  Transport according to current daily price approx. €1,600 Subject to changes and errors in the technical data and prices. Klodpfjv Dfxzox Abvsp Subject to prior sale. Payment conditions  100% after delivery, commissioning and acceptance on site

Condition: ready for operation (used), Year of construction: 2013, operating hours: 26,646 h, functionality: fully functional, machine/vehicle number: 20360, Available for inspection in operation at our production facility. Waterjet cutting machine 6x3m, 1x2.5D cutting head, incl. HD pump 4000 bar, stainless steel cutting tank, abrasive remover. Purchase date 03-12-2013 Serial number 20360 Model Resato ACM 3060 Operating hours 26,646 hours (as of 24 October 2025) XY working range machine 3020 x 6020 mm Precision in X or Y axis +/-50 µm Kljdpfx Absxu U Nmovjp Maximum gap between bridge 210 mm +/- 10 mm Z-axis range -220 – 0 mm Maximum working pressure 4000 bar Minimum speed 1 mm/min Speed range 1 – 30,000 mm/min Maximum acceleration 500 mm/s2 (acceleration depends on cutting process) Ambient temperature 12 – 32°C Relative humidity 30 – 80% General protection class IP54 Specific protection class IP65 Voltage-frequency 1x 230 ± 5% VAC, 50-60Hz Electrical connections 1 x 16A + N + PE Operator panel 17’’ touchscreen, color Network/internet connection RJ45 socket Communication 100BaseT CAT5e Slat load capacity 1000 kg/m2 Floor load 5 N/mm2 Air connection Quick coupling, type Orion Air quality Dry and filtered air Dew point at 3°C at 7 bar Min 7 bar, max 12 bar 30 Nl/min Required floor flatness Max 15 mm deviation over 6 meters Typical sound pressure level 87 – 92 dB Special details The tank was originally plastic but has been modified to stainless steel Pump specifications (optional extra pump available as spare) PJ4-4000 – Resato Waterjet Centix ID: 601194 Model: Resato Powerjet 4000 Serial number: 18996 Purchase date: 26-11-2012 Max. capacity: 3.8 L/min Max. pressure: 4000 bar Max. power: 30 kW Number of intensifiers: 1 Low noise level:

Condition: used, This listing is for the Millipore Elix Advantage 15 Water Purification System Klodpox Tuctsfx Abvjp The unit is in full working condition and is ready for immediate use The Elix Advantage 15 is a laboratory water purification system designed to generate Type II pure water directly from potable tap water using an advanced combination of purification technologies. It’s part of Millipore’s Elix series, which emphasizes reliable, continuous production with minimized maintenance needs.

Condition: excellent (used), Year of construction: 2022, For sale: industrial chiller unit from the reputable manufacturer HYFRA, designed for cooling water or process fluids in industrial installations. The unit is in very good visual condition and was manufactured in 2022. It has been professionally dismantled, is complete, and ready for recommissioning after connection. Technical data (from the nameplate): • Model: SIGMA7-S-P • Cooling capacity: 6.9 kW (conditions: 32°C / 20°C) • Year of manufacture: 2022 • Refrigerant: R410A (GWP 2088) • Refrigerant quantity: 1.0 kg (CO₂ eq. 2.1 t) • Power supply: 3 / PE, 380–415 V ±10%, 50 Hz • Rated current: 8.20 A • Rated power: 4.70 kW • Max. ambient temperature: +42°C • Max. pressure (HP): 42 bar • Protection: 16 A • Weight: - dry: approx. 180 kg - filled with water: approx. 300 kg Features / equipment: • Integrated air-cooled condenser • Comprehensive safeguards (pressure, flow, temperature, antifreeze protection) • Clear error code list on housing • Robust, industrial-grade construction • Connection stubs – visible in the photos • European manufacture, CE certification Applications: • CNC machines • Injection molding machines, extruders • Production lines Klodpfoyc H Irex Abvjp • Process cooling • Plastics, metal, chemical industries

Condition: like new (used), Year of construction: 2025, CARLO SALVI 476 SV revised to new Klodpfx Ajh N Di Djbvsp 4,76x45 mm. 450 ppm - New electrical system according to CE standards with inverter and PLC - New Lubrication System - New engine with disc, pulley and brake - New thread take-up roller pump - New belts - Rectification of all parts of the Central - Pins, Bushings and Nuts replacement - New bearings Available in CALOLZIOCORTE (LC) c/o HBR srl. HBR will provide to the total revision.

Condition: used, High-pressure industrial water pumps – 90 kW – 55 bar – 33 m³/h Available: No. 2 high-pressure multistage industrial pumps for water lifting, complete with three-phase asynchronous electric motor and installation base. The pumps are from a snowmaking plant and are in good overall condition, ideal for reuse in pumping stations, process systems, or pressurization plants. Technical data Pump: Flow rate: 33 m³/h Klodpfsytgvwox Abvop Head: 55 bar Type: High-pressure multistage pump Mounted on skid with flexible coupling Electric motor: Type: Three-phase asynchronous Power: 90 kW Voltage: 400 V Current: 167 A Speed: 2970 rpm Duty: S1 (continuous) Equipment supplied: - Industrial mounting base - Motor-to-pump flexible coupling - Complete assembly ready for installation - Identification nameplates present Typical applications: - Industrial water pumping stations - Pressurization systems - Process plants - Fire-fighting systems - Artificial snowmaking plants - Industrial washing installations 2 identical units available.

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 0278, Mitre cold circular saw EISELE type VMS-III-S-HYD Type No. 430 Machine. No. 0278 Year of construction 1984 Sawing range at 90°: (round) Ø 120 mm Sawing area at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 8, 16, 33, 66 rpm. (2 gear stages + 2 motor speeds) Mitre cut 45° to the left, 90° and up to 30°(60°) to the right, infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Hydraulic material quick clamping device - Infinitely adjustable hydraulic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Convenient and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life Ksdpst A Arljfx Abvolp - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base - Central lubrication (manually operated) Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 490 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 0783, Miter cold circular saw EISELE Type VMS-III-S-PV Type No. 430 Machine. No. 0783 Year of construction 1986 Sawing range at 90°: (round) Ø 120 mm Sawing range at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cut 45° to the left, 90° and up to 30°(60°) to the right infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Pneumatic material quick clamping device Kljdpfjt A Ar Sex Abvsp - Infinitely adjustable pneumatic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Comfortable and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 460 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: used, Manufacturer: Kaltenbach Type: KKS Kedpfx Abowpb E Hovelp Saw blade diameter 370 mm Cutting capacity 45° - 90° round 115 mm flat approx. 215 x 20 mm rectangular approx. 95 x 105 mm U-profile approx. 160 x 55 mm Speed: 14, 19, and 28 rpm Dimensions: 1100 x 1050 x 1600 mm (LxWxH) Weight: approx. 850 kg Equipment: • Semi-automatic operation • Hydro-pneumatic stepless saw blade feed • Mitre cuts on both sides R - L • 0° longitudinal cut possible • Coolant system • 1 saw blade The machine can gladly be demonstrated under power on site. All information without guarantee. Errors and interim sale excepted.

Condition: excellent (used), Cold gasifier for the storage of cryogenic gases (including argon, helium, hydrogen, nitrogen and oxygen). Kljdpfx Abjpgf Rqovop These are 15 vacuum-insulated, double-walled pressure vessels. Manufacturer: Messer Griesheim Model: ST 36 Volume: 3.557 ltr. Operating overpressure: 18 bar / outside vacuum Test pressure: 24,7 bar Operating temperature: -196°C Material: 1.5662 (steel) Dimensions: Height: 3,500 mm Diameter (inside): 1.300 mm Diameter (outside): 1,800 mm Empty weight: 2.700 kg Incl. complete technical pressure vessel documentation

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: TET081P3-NF - 2200414918, cooling capacity: 22.5 kW (30.59 HP), type of input current: three-phase, type of cooling: water, overall weight: 475 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 3.82 m³/h, pump pressure: 2.69 bar, total width: 761 mm, total length: 1,862 mm, total height: 1,437 mm, warranty duration: 12 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / air-cooled water chiller, Model: TAEevo Tech 081 P3-NF Manufacturer: MTA S.p.A. The TAEevo Tech 081 P3-NF is a compact, air-cooled water chiller designed for outdoor installation (operating temperatures from -5°C to +46°C). Features include crankcase heater, phase monitoring, 140-liter buffer tank, integrated P3 circulation pump, and NON FERROUS components, making the unit suitable for operation with aggressive process fluids. Chilled water outlet temperatures are adjustable from -10°C to +30°C. Cooling capacity: 22.5 kW Chilled water temperature (outlet/inlet in °C): 7 / 12 Flow rate (m³/h): 3.82 Available pump pressure (bar): 2.69 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Kodpfjw Np A Ejx Abvolp Max. power consumption: 12.04 kW Max. current: 20.2 A Starting current (circuit): 114.77 A Protection class: IP54 Dimensions: Length: 1,862 mm, Width: 761 mm, Height: 1,437 mm Weight: 475 kg Connection: Rp 1 1/2" Serial number: 2200414918 Year of manufacture: 2024 Condition: Visual 2 (very good), technically sound Stock item, as-new condition Price: On request in EUR (plus VAT, ex works Nettetal) (Subject to technical modifications and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 1981, turning speeds 40/80 U/min 0025 voltage 380 V clamping ja kW Kledpfovu Hlkex Abvop miter ja weight 700 kg