Used Collet Chuck for sale (4,275)

Condition: used, Year of construction: 1971, Technical details: max. diameter of face turning: ca. Ø 900 mm revolution per minute: Spindel: 12,5 - 00 / 24 step U/min revolution per minute: Planscheibe: 8 - 190 / 12 step U/min feed steps: Planscheibe: 0,03 - 3 / step rapid traverse: alle Bewegungen: 2000 / 4000 m/min tool taper: der Arbeitsspindel: ISO 50 / SK50 table clamping surface:: 700 x 800 table rotating: 360° Grad drill table adjustment: quer: 800 mm max. table load: 1500 kg total power requirement: ca. 11,0 kW weight of the machine ca.: 7800 kg dimension machine xH: 3,0 x 2,0 x 2,6 m dimensions electric cabinet: 1800 x 400 x 1950 mm Ø of the face plate 420mm Movement of the face slide 180mm largest Ø during facing approx. 900mm Longitudinal movement of the column 700mm Vertical movement of the headstock 700mm Feed drive of column, headstock and clamping table: -for spindle operation=0,20 - 10 mm/rev with 34 speeds -for operation with faceplate= 0,16 - 16 mm/rev with speeds Equipment: optical fine measuring device/measuring system Heidenhain for axes X/Y/Z/C-table hydraulics machine feet/footplates Njdpfeu Idtpex Anfjwf control panel with boom *

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1000 workpiece height max.: - mm column diameter: 300 mm horizontal adjustment of the boring slide: 400 mm distance table - lower edge spindle: 200 mm spindle taper MT: MK 4 Nsdpfx Anjv S Ay Sofewf bore spindle stroke: 200 mm range of revolutions per minute - continous: 18steps 14-710 U/min swivel range of the arm: 360 Grad feed: 0,09/0,12/0,25/0,5 mm/U weight of the machine ca.: 2,0 t dimension machine xH: 2,4 x 0,9 x 2,4 m Transportable! Operation via pressure switch Support feet 4x D=16x30mm Height-adjustable 60 mm with ratchet wrench *

Condition: ready for operation (used), functionality: limited functionality, drilling depth: 710 mm, rotational speed (max.): 1,250 rpm, table width: 1,250 mm, table length: 1,120 mm, spindle diameter: 100 mm, Placing a bid obligates you to collect the machine by the deadline of 28.01.2026! Prompt scheduling of an appointment is necessary after the end of the auction, as the machine has not yet been dismantled! TECHNICAL DETAILS Working spindle diameter: 100 mm Taper bore of working spindle: ISA steep taper No. 50 Drilling depth in one stroke: 710 mm Lowest position of spindle center above table surface: 0 mm Highest position of spindle center above table surface: 1,200 mm Maximum distance between spindle sleeve and tailstock: 2,300 mm Horizontal travel of tailstock: 1,300 mm Spindle speed: 6 - 1,250 rpm Clamping surface of the table: 1,120 mm x 1,250 mm Nwjdpfxex Hfugj Anfsf Longitudinal travel of the table: 1,300 mm Cross travel of the table: 1,200 mm 34 feeds for spindle, headstock, and table: 0.017 - mm/rev Stepless feeds for headstock and table: 20 - 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Power supply: Three-phase current Voltage: 380 Volt Frequency: 50 Hz EQUIPMENT Documentation incl. wiring diagram Electrical diagrams Operating manuals Note: Brake defective, clutch removed (included). Repair costs in Germany approx. €3,000.

Condition: excellent (used), Professional TITE-LOCK MILLING CHUCK with SK40 – CT20A mounting – 90 mm. The high-quality quick-clamping TITE-LOCK system ensures exceptional clamping force and working precision, ideal for milling, drilling, and precision machining. . Type: TITE-LOCK MILLING CHUCK . Mounting: SK40 – CT20A . Length: 90 mm . Applications: milling, drilling, CNC machining . Condition: used, fully operational, very good technical condition ✅ Robust and precise industrial tool for professional use on milling machines and machining centers. Excellent rigidity and high tool holding force. Nwsdpfexk T H Aex Anfof

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, travel distance X-axis: 6,000 mm, positioning speed: 100 m/min, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, total length: 6,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, fume extraction, nozzle changer, safety light barrier, 3 Chuck Professional pipe laser cutting machine (GS-6022HG) Working area (L/W): 6000mm*φ220mm Repeat positioning accuracy: ≤0.03mm Max. positioning speed: 100m/min Max. acceleration: 1.0G Nodpfsvrwt Tsx Anfewf Max. rotating speed of chuck: 110r/min Machine weight: 10T Round pipe: Φ15mm-Φ220mm Square pipe: 15mm*15mm ~ 150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flat oval tube: Short axis≥15mm, long axis≤210mm Channel steel: Max 20# I-beam: Max 18# H steel: Max 175*90mm Supports high-precision cutting of round tubes, square tubes and special-shaped tubes. Flexibly adapts to different specifications of tubes.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Equipment model: NS56FG Maximum tubelength: Nedpfjww Umajx Anfswf

Condition: used, Year of construction: 1973, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm total power requirement 4,5 kW weight of the machine ca. 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. Nwsdpfxet Hwt So Anfof * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.

Condition: good (used), DIGITAL BORING COLLET Nedps Dv N Iefx Anfewf

Condition: good (used), Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Number of clamping sleeves: 29 pieces -Various sizes: Ø 9-35 mm -6,10,13,14,20,20,20,20,22,24,24,24,26,26,27,28,30,30,30,32,33,3 3,35,35,35,35,35,35 -Cone: 44 to 55 mm -Shaft: Ø 42 mm -Sale: only as a package Nwsdpfx Aneb A Swkjfef -Weight: 16 kg

Condition: used, Dividing Head Nedpfx Anoy E T Dgofowf Center Height: 100 mm Transmission Ratio: 40:1 Spindle Taper: SK 40 with M16 draw thread Clamping Surface: 240 x 200 mm Grid Pattern on Clamping Surface: 210 x 125 mm, Ø 14 mm - 3-jaw chuck Ø 125 mm with step jaws - Crank handle with indexing plate and sector arms - Crank handle with swing-out indexing plate for direct dividing - 1 indexing plate with hole counts: 15, 18, 21, 29, 37, 43, 51 - 1 indexing plate with hole counts: 16, 19, 23, 31, 39, 47, 53 - 1 indexing plate with hole counts: 17, 20, 27, 33, 41, 49, 57 - 24-position index (15° increments), graduated scale on work spindle - Complete dividing head, rotatable and tiltable on the base plate Dimensions (L x W x H): 410 x 370 x 300 mm Net weight: 48 kg Good condition

Condition: used, Thread cutting chuck BILZ Type DSPL 127 MK2 Thread size: M3 - M12 Mounting shank: MK 2 Length compensation: 30 mm Clamping range: Ø 2.5 - Ø 10 mm (tap shank diameter) - Chuck clamping for the tap shank and torque transmission on the square - Adjustable safety clutch for torque limitation - Length compensation +10 mm / -20 mm for precise pitch threading Maximum chuck diameter: Ø 58 mm Chuck length: 120 mm Total length with shank: 215 mm Net weight: 1.7 kg Very good condition Nwodsy E T Daepfx Anfjf

Condition: used, Hydraulic power chuck cylinder for actuating power chucks Suitable for Gildemeister GDM 42 Through-hole cylinder RÖHM SZS 45/92 559 Ident no.: 414096 Serial no.: 7069 Operating pressure: max. 40 bar Speed: max. 7000 rpm Piston diameter: 125 mm Piston rod diameter: 62/53 mm Nodpfxsy E T A Ao Anfjwf Piston stroke: 25 mm Inner diameter of cylinder tube: 45 mm Hydraulic power chuck cylinder for opening and closing automatic power chucks. For hydraulic operation of power chucks or collet chucks. Through-hole cylinder for hydraulic actuation of power or collet chucks with a through-bore.

Condition: used, 3-jaw wedge bar power chuck FORKARDT type HGF 160-45-3 HI GRIP No. 109452 Diameter: 165 mm Internal diameter: 46 mm Cylindrical centering ring mounting: Ø 140 mm Max speed: 5,500 rpm - Wedge bar chuck with centrally adjustable clamping jaws - 1 set of stepped jaws, reversible for use as hard or soft jaws (can be reversed by 180°) Njdpfxjy Ehypo Anfewf - 3 mounting holes Ø 11 mm, bolt circle 105 mm Weight: 9.3 kg Very good, as-new condition

Condition: good (used), Clamping head, dead-collet chuck, collet sleeves, collet, tool holder, milling chuck, milling tool, clamping sleeves -Clamping sleeves: 17 pieces -Diameter: Ø 6 - 20 mm, see photos -Price/Delivery: complete Nwedpfxjwc R Dfo Anfof -Transport dimensions: 230/120/H60 mm -Weight: 2.5 kg

Condition: good (used), Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Length 85 mm, 79 pieces -Sizes: Ø 1 - 20 mm, see photos -Price/Sale: complete -Dimensions: 310/200/H150 mm -Weight: 13 kg Nwedpfjvv Uy Sex Anfef

Condition: good (used), clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Clamping sleeves: length 80 mm, 23 pieces -Sizes: Ø 8 - 40 mm, see photos -Price/Delivery: complete -Transport dimensions: 360/260/H80 mm Nsdpfxou T Tpnj Anfewf -Weight: 19.2 kg

Condition: good (used), clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves Nwedju Tyu Dspfx Anfsf -Clamping sleeves: length 115 mm, 20 pieces -Sizes: Ø 2 - 14 mm, see photos -Price/Delivery: complete -Transport dimensions: 330/190/H120 mm -Weight: 3.6 kg

Condition: good (used), clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Clamping sleeves: length 70 mm, 17 pieces -Sizes: Ø 10 - 40 mm, see photos -Price/Delivery: complete -Transport dimensions: 300/170/H70 mm -Weight: 9.3 kg Nwjdpfx Aju Uwwljnfof

Condition: good (used), Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets Njdpoyz Sl Uofx Anfswf -Clamping sleeves: Length 42 mm, 37 pieces -Sizes: Ø 2.5 - 18 mm, see photos / parts list -Price/Fee: complete -Transport dimensions: 180/160/H42 mm -Weight: 3.0 kg

Condition: good (used), Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets Nwodpfxeyzyiuj Anfsf -Clamping sleeves: Length 125 mm, 27 pieces -Sizes: Ø 0.7 - 17 mm, see photos / parts list -Price/Fee: complete -Transport dimensions: 195/180/H130 mm -Weight: 4.7 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck Nwodpob A Hh Hjfx Anfef -Mounting plate: Ø 300 mm -Mouth size: Ø 240 mm -Bore: Ø 75 mm -Weight: 30 kg

Condition: used, overall weight: 260 kg, Material: steel Nodpfxoyxgf Rs Anfowf Diameter: 710 mm Spindle bore: 150 mm Spindle speed: 400 RPM Weight: 260 kg

Condition: good (used), 3-Jaw Spiral Chuck Manufacturer: RÖHM Diameter 500 mm Spindle mount DIN 55027 size 11 Chuck inner bore 200 mm Chuck height 145 mm Weight 182 kg Accessories / Special Features: • Hard turning and drilling jaws • 1 chuck key Siegfried Volz Machine Tools Nwsdpfxopmtgno Anfsf Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), 1 used, very well-preserved thread cutting chuck M 14-30 for cutting internal threads on switchable drilling machines, lathes and milling machines. Can be used horizontally and vertically Brand: BILZ, Origin Germany Model: DSPL 30-MK4 • With Morse taper shank and tang according to DIN 228 B • With patented double chuck (clamps shank and square) • Elastic length compensation for compression and tension • Axis-parallel pendulum device and elastic length compensation for cutting precisely aligned threads • With clockwise and counterclockwise rotation Technical specifications: Suitable for threads M 14 - 30 Morse taper size Mk 4 Clamping range diameter min. 11 mm Nwsdpowimm Nofx Anfef Clamping range diameter max. 23 mm Axis length compensation 30 mm Protrusion length 230 mm Axis-parallel compensation 2 mm Weight 12 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2000, functionality: fully functional, overall weight: 800 kg, chuck outer diameter: 800 mm, mount diameter: 520 mm, bolt circle diameter: 436 mm, cone mount: 286 mm, Pos. 1.0) Chuck diameter ø 800mm Three-jaw power chuck with 6 clamping jaws Manufacturer: SMW-Autoblock ø 800HL-6GR incl. Flange size 11: SMW Autoblock: 241261 FF2 Thread connection for draw tube: Workpiece clamping via jaws: Pneumatic or hydraulic operation. Incl. bolt-on jaws with serrated interface: Weight: approx. 700kg Good condition, low operating hours. ----- Pos. 1.1) Optional flange available Mounting diameter: 520 mm Bolt circle: 436.6mm; M24 Taper: KK 15: 285.78mm Width: approx. 40mm Weight: approx. 60kg _____ SMW-800HL description Suitable for clamping thin-walled workpieces. Designed for horizontal CNC lathes. Adjustable to 6 jaws. STANDARD EQUIPMENT Power chuck with mounting bolts, Incl. set of bolt-on jaws Low maintenance due to sealed design (Proofline series chucks). 6-jaw power chuck _____ Pos. 2) 3-jaw power chuck ø 800 mm Manufacturer: FORKARDT: Jaw interface: Serrated Size: to be provided Thread connection for draw tube: on request Spindle adapter flange for machine: on request Nwjdpfxoy Appmj Anfef Price incl. shipping: on request