Used Collet for sale (841)

Condition: ready for operation (used), functionality: limited functionality, drilling depth: 710 mm, rotational speed (max.): 1,250 rpm, spindle diameter: 100 mm, table length: 1,120 mm, table width: 1,250 mm, Placing a bid obligates you to collect the machine by the deadline of 28.01.2026! Prompt scheduling of an appointment is necessary after the end of the auction, as the machine has not yet been dismantled! TECHNICAL DETAILS Working spindle diameter: 100 mm Taper bore of working spindle: ISA steep taper No. 50 Drilling depth in one stroke: 710 mm Lowest position of spindle center above table surface: 0 mm Highest position of spindle center above table surface: 1,200 mm Maximum distance between spindle sleeve and tailstock: 2,300 mm Horizontal travel of tailstock: 1,300 mm Spindle speed: 6 - 1,250 rpm Clamping surface of the table: 1,120 mm x 1,250 mm Ppsdox Hfugjpfx Ag Isl Longitudinal travel of the table: 1,300 mm Cross travel of the table: 1,200 mm 34 feeds for spindle, headstock, and table: 0.017 - mm/rev Stepless feeds for headstock and table: 20 - 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Power supply: Three-phase current Voltage: 380 Volt Frequency: 50 Hz EQUIPMENT Documentation incl. wiring diagram Electrical diagrams Operating manuals Note: Brake defective, clutch removed (included). Repair costs in Germany approx. €3,000.

Condition: used, Year of construction: 1971, Technical details: max. diameter of face turning: ca. Ø 900 mm revolution per minute: Spindel: 12,5 - 00 / 24 step U/min revolution per minute: Planscheibe: 8 - 190 / 12 step U/min feed steps: Planscheibe: 0,03 - 3 / step Ppodeu Idtpjpfx Ag Ijl rapid traverse: alle Bewegungen: 2000 / 4000 m/min tool taper: der Arbeitsspindel: ISO 50 / SK50 table clamping surface:: 700 x 800 table rotating: 360° Grad drill table adjustment: quer: 800 mm max. table load: 1500 kg total power requirement: ca. 11,0 kW weight of the machine ca.: 7800 kg dimension machine xH: 3,0 x 2,0 x 2,6 m dimensions electric cabinet: 1800 x 400 x 1950 mm Ø of the face plate 420mm Movement of the face slide 180mm largest Ø during facing approx. 900mm Longitudinal movement of the column 700mm Vertical movement of the headstock 700mm Feed drive of column, headstock and clamping table: -for spindle operation=0,20 - 10 mm/rev with 34 speeds -for operation with faceplate= 0,16 - 16 mm/rev with speeds Equipment: optical fine measuring device/measuring system Heidenhain for axes X/Y/Z/C-table hydraulics machine feet/footplates control panel with boom *

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm Ppsdpfx Agov S Ay Sj Ijl arm length:: 1000 workpiece height max.: - mm column diameter: 300 mm horizontal adjustment of the boring slide: 400 mm distance table - lower edge spindle: 200 mm spindle taper MT: MK 4 bore spindle stroke: 200 mm range of revolutions per minute - continous: 18steps 14-710 U/min swivel range of the arm: 360 Grad feed: 0,09/0,12/0,25/0,5 mm/U weight of the machine ca.: 2,0 t dimension machine xH: 2,4 x 0,9 x 2,4 m Transportable! Operation via pressure switch Support feet 4x D=16x30mm Height-adjustable 60 mm with ratchet wrench *

Condition: ready for operation (used), Year of construction: 1975, arm 1200MM stroke head on bench 1400MM universal head Ppjdpfxjvm Akgo Ag Isl portable radial

Condition: used, Year of construction: 1973, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm total power requirement 4,5 kW weight of the machine ca. 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. Pedet Hwt Sspfx Ag Iopl This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.

Condition: good (used), DIGITAL BORING COLLET Ppodpfx Aj Dv N Iog Isl

Condition: used, Clamping head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Clamping sleeves: 23 pieces -Sizes: Ø 3 - 8.5 mm, see photo / parts list -Thread: M14 x 1.25mm -Dimensions: see photo techn. drawing -Sale: only for complete sale Ppjdpshh Tlisfx Ag Iol -Transport dimension: 180/140/H50 mm -Weight: 1.7kg

Condition: good (used), Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collet sleeves Psdpfefndyrjx Ag Ispl -Clamping sleeves: 6 pieces -Recording: SK50 -Various sizes: 6-32 mm -Sale: only to be sold as a complete set -Box dimensions: 280/220/H155 mm -Weight: 13 kg

Condition: good (used), Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Quantity: 12 collets -Various sizes: 5-25 mm -Drawing in the pictures Ppsdpfx Agoctg Rre Ijl -Price/Sale: complete -Weight: 2.1 kg

Condition: good (used), Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Length 85 mm, 79 pieces -Sizes: Ø 1 - 20 mm, see photos Pjdpfx Aevv Uy Seg Ispl -Price/Sale: complete -Dimensions: 310/200/H150 mm -Weight: 13 kg

Condition: good (used), Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Quantity: 15 collets Ppedpfx Agsb A I U Se Iel -Various sizes: Ø 3/3x4/2x3/2x6/7/3x8/9/10/11 mm -Price/Sale: complete -Weight: 1 kg

Condition: used, clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves Pedpju Tyu Dofx Ag Iepl -Clamping sleeves: length 115 mm, 20 pieces -Sizes: Ø 2 - 14 mm, see photos -Price/Delivery: complete -Transport dimensions: 330/190/H120 mm -Weight: 3.6 kg

Condition: good (used), Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, adapter sleeves -Manufacturer: WMW, adapter sleeves 10 pieces, with plastic box -Sizes: Ø 4-20 mm with wrench, see photos -Sale: only for sale as a whole Psdpfogl Rxxjx Ag Ijpl -Dimension box: 260/330/H80 mm -Weight: 2.3 kg

Condition: good (used), Collet collet sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, clamping sleeves Psdjb Hbxkspfx Ag Iopl -Number: 28 pieces adapter sleeves -different sizes: 6-20 mm -Only for sale as a package -Weight: 5 kg

Condition: used, clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Clamping sleeves: length 80 mm, 23 pieces -Sizes: Ø 8 - 40 mm, see photos -Price/Delivery: complete -Transport dimensions: 360/260/H80 mm -Weight: 19.2 kg Ppodpfou T Tpnox Ag Iol

Condition: used, collet chuck, tool holder, tool holder, milling chuck, milling tool -Collet holder: SK50 -Clamping sleeve: Ø31 mm Podsu S Tcxspfx Ag Ijpl -Dimensions: Ø 88 x 200 mm -Weight: 3.0 kg

Condition: good (used), Collet chuck, tool holder, tool holder, milling chuck, milling tool Pjdpfob A Ikcox Ag Iopl -Recording: SK40 -Cone: Ø B11/B16 -Price: complete -Quantity: 2 available -Weight: 2 kg

Condition: good (used), Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Milling holder: SK40 5 pieces -Mounting: Ø 33 mm: 2x Ø 28 mm / 1x Ø25/30/32 mm each -Versions: see photos -Price/Delivery: complete -Transport dimensions: 220/130/H190 mm -Total weight: 8.4 kg Ppsdpfswaw Nvsx Ag Ijl

Condition: used, clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves Ppsdpfxju S Tbzs Ag Iel -Clamping sleeves: length 80 mm, 5 pieces -Sizes: Ø 15/16/20/25/30 mm -Price/Delivery: complete -Transport dimensions: 140/90/H80 mm -Weight: 1.8 kg

Condition: used, collet chuck, tool holder, tool holder, milling chuck, milling tool Podpfeu S Tb Isx Ag Ispl -Collet holder: SK40 2 pieces -Type: Ø 63 x 150 mm -Clamping sleeve: Ø3 mm / Ø10 mm -Price/Delivery: complete -Transport dimensions: 150/120/H63 mm -Total weight: 2.6 kg

Condition: good (used), Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Collet chucks: Ø 5-16 mm Psdjb A R Ngspfx Ag Iopl -Tightening thread: M16 x 1.5 -Dimensions: See drawing in the images -Weight: 2 kg

Condition: good (used), Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets Pedpfx Aogl Rxmsg Ispl -Manufacturer: WMW, collets, 12 pieces, with plastic box -Sizes: Ø 3-18 mm, see photos -Sale/Price: complete -Box dimensions: 260/330/H80 mm -Weight: 2.2 kg

Condition: used, Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Number: 32 pieces adapter sleeves Podpfx Asd Erwgog Iepl -different: sizes and manufacturers -Sale: only as a package

Condition: good (used), Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Quantity: 21 pieces of collets -Various sizes: 3-25 mm -Price/Sale: complete -Weight: 4.5 kg Pjdpfjb Hbxfox Ag Ispl

Condition: good (used), collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Number: 14 pieces clamping sleeves type ER25 Pedpfx Agob Iwrfe Iopl -various sizes: 2-14 mm -Drawing in the pictures -Only sold as a package -Weight: 1 kg