Used Composting for sale (91)

Year of construction: 2001, condition: used, functionality: fully functional, Compost turner BACKHUS 10.10. Diesel engine: 264 hp Weight: 14.9 tons Fgsdpfx Aozudwtol Seh

Year of construction: 2001, condition: excellent (used), functionality: fully functional, Compost Turner BACKHUS 10.10. Diesel engine: 264 hp Fjdpfxoy Equ Hj Al Sjgh Weight: 14.9 t Current videos can be provided upon request.

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Fgjdpfxszg Dx Ue Al Ssh Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, The machine is operational. Sandblasting and repainting of the paintwork and other parts are available for an additional charge upon request. Serviced. Last service: April 2025. Operating manual available. Deutz 6-cylinder engine, 240 hp. Dimensions (length/width/height): 3.45/4.65/3.35 m. Operating dimensions: Wavelength 3.88 m, diameter 1.0 m. Fgodpezkrrwefx Al Ssh Weight: approx. 10,000 kg. Delivery rate: 300–2,500 m³. Mileage: unknown, odometer defective. Upon request, we will gladly send you a short video of the machine in operation.

Year of construction: 2014, operating hours: 12,583 h, condition: used, functionality: fully functional, machine/vehicle number: VKARC1310E0000007, The Stonefex 3000 stone separator reliably and efficiently removes stones and inert objects from biomass. The input product is typically a biomass fraction, such as that obtained from a screen, for example, the woody part of green waste, an intermediate fraction after compost screening, or wood chips. Fgjdpfx Alozt I Rus Ssh

Year of construction: 2019, operating hours: 1,685 h, condition: good (used), Backers 2HTA Star Screen / Lindner ZetaStar 75 – Crawler Mobile & Hooklift System For sale is a versatile Backers 2HTA built in 2019 with only 1,685 operating hours. The machine was manufactured by Backers and was also sold under the name Lindner ZetaStar 75. The machine is ideally suited as a secondary screening unit behind shredders and pre-shredders. It performs especially well when processing bulky waste, commercial waste, green waste or waste wood, as the material is efficiently screened and the oversized fraction can be returned directly into the shredder via the hydraulically swivelable oversize conveyor. This eliminates the need for an additional excavator or wheel loader for material recirculation. Fsdpoy Ui Erjfx Al Sogh Thanks to the flexible star and screen deck configuration, the machine can also be used for screening topsoil, wet clay soil, sand, compost or construction waste. The screening size can be individually adjusted; the machine is currently set up for material smaller than 60 mm. Modifications to the stars and screen deck are available at extra cost. The compact design allows easy transportation via hooklift system. On site, the machine can be repositioned quickly using the crawler track system. Technical Data: * Year of manufacture: 2019 * Operating hours: 1,685 h * 2-fraction screening * Perkins engine 74.5 kW * DEF / AdBlue system * Throughput: >120 m³/h * Operating weight: approx. 12 t * Crawler mobile with hooklift system Transport Dimensions: * Transport length: 7.50 m * Transport width: 2.55 m * Transport height: 2.70 m Hopper: * Capacity: 2.5 m³ * Dimensions (L x W x H): 2.80 m x 1.20 m x 1.00 m * Loading height: approx. 3 m Screen Deck: * Dimensions (L x W): 4.20 m x 1.20 m Special Features: * Hydraulically swivelable oversize conveyor * Direct recirculation of oversized material into the shredder * No additional wheel loader required for recirculation * Adjustable screening sizes available * Suitable for various materials * Compact and highly mobile design The machine is in good condition and ready for immediate use. Ideal for recycling companies, composting operations, wood processing, waste management or earthmoving businesses. Viewing and test operation possible by appointment. If interested, please feel free to contact us. Notes: * Sale excludes any warranty or guarantee. * No returns or renegotiations. * Subject to prior sale. * All information provided without guarantee. The seller accepts no liability for errors, omissions or changes in the description. * Sale is subject to prior sale at any time.

Condition: excellent (used), Year of construction: 2000, operating hours: 10,900 h, functionality: fully functional, overall weight: 16,000 kg, power: 338 kW (459.55 HP), Willibald MZA 3500 / Shredder / Chipper / Crusher • Manufacturer: Willibald • Type: MZA 3500 • Year of manufacture: 2000 • Operating hours: 10,900 hours • Engine: MAN D 2876, 6-cylinder diesel • Power: 338 kW / 460 hp • Inlet opening: 500 mm • Number of axles: 2 tandem axles • Braking system: Air pressure • Number of rotors: 48 • Rotor speed: 1300 rpm Fgodpfx Aozdtzmel Sjh • Tow hitch: 40 mm • Fiberizing of organic material for composting up to a diameter of 30 cm • Shredding of old wood, waste wood up to a diameter of 30 cm • Total weight: 16,000 kg • German machine • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: excellent (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 21O0400016-04, total height: 6,557,000 mm, total width: 2,450,000 mm, total length: 8,290,000 mm, type of input current: three-phase, input voltage: 380 V, power: 90 kW (122.37 HP), Equipment: CE marking, type plate available, The Mixer is a machine designed to blend materials of different consistencies, such as pruning residues and digestate, within the composting process. Feeding can be automatic via conveyor belts or manual using a loader operated by an operator. The machine is in nearly-new condition and can be applied in various fields; it can be inspected and tested, including with specific products. Fodsw Tir Iepfx Al Sogh

Condition: excellent (used), Year of construction: 2019, Doppstadt HS 800 Star Screen with Hooklift System Manufacturer: Doppstadt Model: HS 800 Star Screen with Hooklift System Year of Manufacture: 2019 For sale is a Doppstadt HS 800 star screen with a hooklift system, manufactured in 2019. Equipment: 2-fraction version Central lubrication system Hooklift system Operating weight: approx. 9,000 kg Additional interchangeable star screen kit, year of manufacture 2020 The machine is in good and operational condition. Thanks to the additional star screen kit, the machine can be flexibly adapted to different material requirements. Ideally suited for the processing of compost, biomass, wood, green cuttings, and other bulk materials. Further information, photos, or an inspection appointment are available upon request. Price: Upon request Location: Upon request Fgjdpfx Ajzdbp Tjl Ssh Errors and prior sale excepted.

Condition: used, Year of construction: 2015, ALLU DS 4-12 bucket separator / screening bucket – manufactured in 2015 – 2,070 kg. For sale: an ALLU DS 4-12 bucket separator/screening bucket, manufactured in 2015. High-quality Finnish ALLU attachment for processing a wide variety of materials directly on the construction site. Technical data: * Manufacturer: ALLU Finland Oy * Type: DS 4-12 Fgodpjz Dm Nbefx Al Ssh * Year of manufacture: 2015 * Serial number: DS41215444 * Weight according to nameplate: 2,070 kg * Recommended hydraulic oil flow: 95–160 l/min * For excavators approx. 20–35 t * 4 drums * Robust heavy-duty design Possible applications: * Sieving soil and topsoil * Construction rubble and recycled materials * Gravel and sand * Compost and biomass * Processing and separating soil material * Depending on the shaft configuration, also crushing and mixing The ALLU D series is designed for sieving, crushing, mixing, aerating, and loading material. Condition: used, with signs of wear and tear commensurate with its age. Inspection possible by appointment.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,685 h, maximum speed: 80 km/h, overall weight: 11,500 kg, total height: 2,500 mm, total length: 9,720 mm, total width: 2,300 mm, mobility: mobile, machine/vehicle number: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were replaced just a few operating hours ago. Some spare flails are still available and will be included in the sale. All 8 V-belts were also replaced just a few operating hours ago. Both NOx sensors as well as AdBlue sensors are new. Fgjdpfx Aljy Hi D Sj Sjh Important note: Drawbar is bent, therefore currently not road-legal. Throughput: 60-100 m³/h depending on material and feeder equipment Recommended max. log diameter: 200 mm Machine No.: 11520 Max. revolutions per minute: 1200 rpm Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer’s Description: FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated “HFG (Husmann forestry equipment)”, achieve a uniform, fine, and clean shredding result thanks to their special beating technology and flail arrangement. The shredded material is fed via a spacious intake hopper with forged steel chain conveyor to the infeed roller and onward to the flail rotor. The pendulum-mounted infeed roller is guided by rack-and-pinion and driven hydraulically by a large reduction gearbox. Adaptable to the material being fed, the roller can also be operated and lifted by remote control. The roller or feed aperture of 460 mm ensures smooth and fast feeding. The robust rotor, made from high-grade steel (1000 kg), reinforced with additional bracing and mature construction techniques, is break-proof even when processing heavy foreign materials. Sixty free-swinging flails are arranged in offset positions on eight hardened flail shafts. The quick-change system allows the carbide-tipped flail tips to be bolted on to the flail holders. With the large number of 50 mm wide flails and the rotor’s direction of rotation across a breaker bar towards the infeed belt, the shredding material is optimally fragmented and made compostable. The load-dependent and continuously adjustable feeding speed of the scraper floor and infeed roller allows further influence and improvement of the output product quality. The rotor trough and discharge area design allows for windrow heights up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, making operation and maintenance simple. Clear controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit is equipped with an 80 km/h running gear and air brakes, and can be configured either stationary or with a hooklift frame. The HFG IV is a composting machine for organic and inorganic waste, suitable for mechanical feeding." If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, power: 209 kW (284.16 HP), overall weight: 12,000 kg, fuel type: diesel, color: yellow, fuel: diesel, gearing type: automatic, emission class: euro4, loading space width: 2,550 mm, loading space length: 5,150 mm, loading space height: 3,100 mm, Year of construction: 2012, operating hours: 6,790 h, machine/vehicle number: 17.55.856, Backhus 17.55 windrow turner together with Backhus Hose Drum HD 63 for sale. The 17.55 Machine is fully equipped in great and working condition. Manufactured in 2012 and 6790 operating hours. The machine is sold together with the Backhus Hose Drum HD63 with 200 m long hose (Drum has never been used) which can be connected to the machine for spraying the compost rows. The HD 63 drum is operated automatically via the Bachus 17.55. On demand we can send aditional pictures. Fjdpfx Asxmvlyel Sogh For further information please contact us.

Condition: new, Year of construction: 2026, HIGH-QUALITY SCREENING DRUM – OPTIMIZED DESIGN Suitable for Doppstadt SM 620 / SM 518 and Komptech Nemus 620 Robust construction – optimized hole geometry – high screening performance Are you looking for a powerful and durable screening drum for professional use? Our screening drum has been structurally optimized to combine high stability, reliable material flow, and the lowest possible tendency to clog. Suitable for processing: Compost Topsoil Biomass Wood and organic materials other bulk materials – depending on the selected hole size ----- WHAT MAKES THIS SCREENING DRUM SPECIAL? Trapezoidal hole design – 18 to 21 mm The openings are laser-cut in a trapezoidal shape and widen from approximately 18 mm to 21 mm. Due to this special geometry, material components that become lodged in the opening during the screening process can more easily exit. The result: ➡️ fewer clogged openings ➡️ reliable material flow ➡️ uniform screening process. As a result, the drum is not only designed for the largest possible screening area but also for the stresses of daily professional use. Fgedsz N Al Repfx Al Seh ----- A special structural advantage: Reinforced screw conveyor In the area of the screw conveyor, there are no openings on either side for approximately 15–30 mm. This keeps the highly stressed area closed and provides greater material stability. ➡️ higher load-bearing capacity ➡️ less weakening of the material ➡️ robust design of the screw conveyor ➡️ designed for demanding continuous use Rectangular alignment of the holes in the direction of material flow This ensures that the material is guided in a controlled manner across the screening area, and the available screening area is used efficiently. ----- YOUR ADVANTAGES ✅ Optimized screening performance ✅ Lower tendency to clog ✅ Uniform material flow ✅ Large open screening area ✅ High mechanical stability ✅ Reinforced screw conveyor ✅ Robust and durable construction ✅ Professional manufacturing ✅ Suitable for demanding recycling and processing operations ----- We specialize in the manufacture of metal assemblies, screening drums, and components for machinery and recycling technology. If you have any questions about the right drum, design, or hole size, we will be happy to assist you. SUITABLE FOR Doppstadt SM 620 SM 518 Komptech Nemus 620 QUALITY FROM PROFESSIONAL MANUFACTURING The result is a robust screening drum for users who value performance, service life, and reliable operation. ----- INDIVIDUAL HOLE DESIGN POSSIBLE Depending on the application, different hole sizes or mesh widths may be of interest. Do you need a different hole size or a special design? Please contact us. We will be happy to check the suitable design for your application. MANUFACTURER RKS Metallverarbeitung GmbH, 48336 Sassenberg

Year of construction: 2023, condition: used, The drum sieve REMAV RS1500 is designed for space-saving sieving and, with a small space requirement, can separate larger quantities of screenings and lay them over conveyor belts and in heaps! Fedpfx Alorrvy Aj Sogh As a car trailer with street legal (80 km / h) with TüV it is easy to transport with 2.4 to total weight. Processing of all kinds of soils, broken rubble or compost - the RS 1500 is ideal for use in gardening and landscaping, civil engineering or pipeline construction!

Condition: used, power: 104 kW (141.40 HP), fuel type: diesel, color: yellow, first registration: 07/2017, Year of construction: 2017, operating hours: 18,886 h, Model year: 2017 Number of cylinders: 4 Engine displacement: 6,930 cc Unladen weight: 13,500 kg Payload: 3,500 kg GVWR: 17,000 kg Dimensions (L x W x H): 753 x 250 x 325 cm CE marking: yes # OFFER ## Liebherr L 538 wheel loader with high-dump bucket Manufacturer: Liebherr Type: L 538 Year of manufacture: 2017 Operating hours: 18,886 original hours Color: Original Liebherr factory paint Condition: Normal, well-maintained used condition ### General description We offer you this Liebherr L 538 wheel loader from the year 2017. The machine has 18,886 original operating hours and is in a normal, well-maintained used condition. Thanks to the proven Liebherr quality, this machine is ideally suited for daily professional use. The wheel loader is equipped with an original high-dump bucket and is ideal for loading walking floor trailers, containers, and high trucks. In addition, the machine has solid rubber tires, which minimizes downtime due to tire damage. This makes it particularly suitable for recycling plants, scrap yards, transshipment companies, and industrial applications. ### Engine * Manufacturer: Liebherr * Engine type: Liebherr D934 A7 * 4-cylinder turbocharged diesel engine * Displacement: approx. 5,030 cm³ * Power: 104 kW (141 hp) * Emission standard: Stage IV / Tier 4 Final * Water-cooled * Fuel-efficient * High torque at low speeds ### Drive * Liebherr hydrostatic drive * Permanent all-wheel drive * Automatic transmission * High tractive force * Precise and comfortable operation ### Equipment * Original high-dump bucket * Solid rubber tires * Comfort cab * Air conditioning * Heater * Air-suspended driver's seat * Joystick control * Work lights * Reversing alarm * CE version ### Technical data * Operating weight: approx. 13,500 kg * Engine power: 104 kW (141 hp) * Bucket capacity, high-dump bucket: approx. 3.0 m³ * Tipping load, straight: approx. 9,500 kg * Maximum speed: 40 km/h ### Transport dimensions * Overall length: approx. 7.55 m * Overall width: 2.55 m * Overall height: approx. 3.30 m * Wheelbase: 3.00 m * Transport weight: approx. 13,500 kg ### Areas of application Fjdpfxozk Elds Al Segh This machine is ideally suited for: * Recycling plants * Scrap and metal recycling * Waste management * Transshipment companies * Wood industry * Biomass * Composting plants * Industrial companies * Loading of walking floor trailers and containers ### Summary * Year of manufacture 2017 * 18,886 original operating hours * Original Liebherr factory paint * High-dump bucket * Solid rubber tires * Fuel-efficient Liebherr engine * Hydrostatic drive * Well-maintained used condition * Ready for immediate use This Liebherr L 538 is a reliable and economical wheel loader solution for professional use in recycling, transshipment, and industrial operations. The combination of a high-dump bucket, solid rubber tires, and robust Liebherr technology makes this machine a...

Condition: used, Year of construction: 2024, operating hours: 300 h, Self-propelled compost turner for the treatment of organic waste such as green waste, bio waste or microbiologically contaminated soils. JT630, semi-autonomous - windrow width up to 6.30 m Fjdjizku Eepfx Al Sjgh - windrow height up to 2.9 m - radio-controlled with semi-autonomous functions - up to 25% fuel savings - Easy to transport and quickly ready for use

Condition: used, power: 265 kW (360.30 HP), gearing type: automatic, fuel type: diesel, first registration: 01/2016, emission class: euro4, BACKHUS A63 Compost Turner | Year of manufacture 2016 | Top condition For sale is a fully functional compost turner from the manufacturer BACKHUS, model A63. Year of manufacture 2016. | Working width: approx. 6.3 m | Power: approx. 360 hp | Comfort cabin, hydraulic drive | Ideal for large-scale composting, digestate, green waste | Regularly serviced, ready for operation Service recently done! Completely overhauled!!! Fjdpfjwqqyijx Al Ssgh

Year of construction: 2024, condition: like new (used), The separator is designed for screening topsoil / humus. With the Terra-Star, screening and blending of compost, sand, or other materials can be accomplished in a single operation. The four shafts provide impressive throughput in screening and mixing. The shafts are equipped with star discs made from wear-resistant HX 500. In case of wear, re-welding can be performed at any time. The Terra-Star is a modern system designed to give you a foundation for future adaptation, today. Fjdpfeya Uuzox Al Sjgh Changing to other carrier machines is always possible, as all connections are bolted. Converting the shafts for different applications is also feasible at any time—from screening shafts to mixing shafts or other combinations. Required adapters for excavators or wheel loaders are available from us upon request. For excavators from 2.2 t For wheel loaders from 1.8 t Weight in kg: 250 Throughput: 6-8 m³/h No leakage oil connection required Series: TSE.054.087

Year of construction: 2025, condition: like new (used), Fine screening 0-15/20 mm. The separator is ideally suited for fine screening of topsoil and humus when it is undesirable for larger stones to be present in significant quantities in the screened material. The mixing of compost, sand, or substrate in a supplementary pass while screening with a Terra-Star also works excellently. This way, dirt is turned into new money! Fodsyfwd Nopfx Al Sogh Disc spacing: 10 mm. Screen size: 0-15/20 mm. Fitted with an OQ45-5 quick coupler, which can be replaced or purchased for €1,890. For excavators from 6 t For wheel loaders from 4 t Throughput: 18-23 m³/h Leak oil connection required: 2 Series: TSE.103.569

Year of construction: 2025, condition: like new (used), The separator is designed for screening topsoil / humus. Screening and mixing of compost, sand, or other materials can be performed in a single operation with the Terra-Star. The four shafts deliver an impressive throughput when screening and mixing. The shafts are fitted with wear-resistant HX 500 star discs. When wear occurs, the discs can be re-welded at any time. The Terra-Star is a modern, forward-thinking system that already provides the foundation for tomorrow’s adaptability. Switching to other carrier machines is always possible, as all components are bolted. The shafts can also be converted for other applications at any time, for example, from screening shafts to mixing shafts or to any other combination. Required adapters for excavators or wheel loaders are, of course, available upon request directly from us. Fgjdpfx Asya Uu Iel Ssh Price without mounting plate. Mounted is a Lehnhoff quick coupler, which can be retained or purchased separately. Price MS 03: €420 For excavators from 2.2 t For wheel loaders from 1.8 t Weight in kg: 250 Throughput: 6-8 m³/h Leak oil connection required: 0 Series: TSE.054.104

Year of construction: 2025, condition: like new (used), Medium screening 0-20/25 mm The installed screening shaft with a disc spacing of 15 mm is the most popular and frequently purchased screening line. Suitable for screening topsoil/humus, with smaller stones of -20/25 mm included in the fraction. The stones maintain soil permeability and stability, reducing moss formation. Mixing in compost, sand, or substrate turns dirt into new revenue. Disc spacing 15 mm – in a single operation with screening – works excellently with a Terra-Star. Screen fraction: 0-20/25 mm Wheel loader mounting is installed but not included in the price. Fedoyfwbzspfx Al Segh On request, we supply the separator with adapters for excavators and wheel loaders. For excavators from 4t For wheel loaders from 3t No leakage oil connection necessary Series: TSE.083.210

Year of construction: 2021, condition: used, The separator was used in the production of flowable fill (liquid soil). Primarily, peat was shredded, which is why cross-discs are installed to ensure effective material size reduction. The PE lining ensures improved material flow. The shafts are suitable for shredding biomass and compost, as well as other soft materials such as bark, etc. The separator is equipped with an adapter compatible with wheel loader systems from Volvo, Cat, and Liebherr, as well as an overflow protection system that prevents debris from spilling over. We can also equip the separator with different shafts, such as screening shafts or mixing shafts. Please refer to the attached description. Fjdpfeyf Ar Eox Al Ssgh Suitable for excavators from 16 t Suitable for wheel loaders from 12 t Weight (kg): 1600 Drain line required: 2 Series: TSC.184.007

Year of construction: 2022, condition: used, Application with screening shafts: Separation of stones, branches, roots, turf, debris, etc. from reusable waste soil. Effective even with moist soil. Mixing in compost, sand, substrate, etc. is possible in a single pass during screening. Suitable for screening topsoil, construction waste, gravel. Ideal for backfilling structures and trench refilling, etc. Can also be adapted for other mesh sizes or shaft tasks upon request—please ask us for details. The separator comes from a buyback due to business closure. The separator has been inspected in our workshop and includes a 12-month warranty. Currently, an OQ45-5 is installed, which is not included in the price. Price: €1,750 Fgodpfxsyfwdvj Al Sjh For excavators from 6 t For wheel loaders from 4 t Weight in kg: 600 Throughput: 23 m³/h Leak oil connection required: 2 Series: TSE.103.283

Condition: excellent (used), Year of construction: 1991, For sale a screening bucket of the renowned Van Dalfsen brand, model HPL 2000 SP20. Specification: • Type: Screening bucket (rotary) • Model: HPL 2000 SP20 • Drive: hydraulic • Working width: approx. • Technical condition: good, functional • Ideal for screening soil, compost, rubble, stones, etc. - Solid construction, ready to work - Suitable for excavators, loaders. Fgjdswpl Rmspfx Al Ssh

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, I am selling: TRASMEC COC800DN Mobile Screw Loader/ Conveyor in a good working condition. Manufactured in 2009 by the well-known Italian conveying equipment manufacturer TRASMEC S.r.l. Suitable for handling wood chips, sawdust, biomass, shavings, pellets, compost, and other bulk materials. Ideal for sawmills, pellet plants, biomass facilities, recycling operations, and wood-processing companies. Specifications Manufacturer: TRASMEC S.r.l. (Italy) Model: COC800DN Year of Manufacture: 2009 Serial Number: AL0581C-C006603 Mobile wheeled design Heavy-duty steel construction Industrial screw conveyor system Electric drive CE-marked European equipment Condition Used industrial equipment Structurally sound Applications Wood chips Sawdust Fgodpfxozcu Hvs Al Soh Biomass Wood shavings Pellet production Compost and organic materials Bulk material handling