Used Compressors for sale (3,354)

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Max. load per shelf 35 kg Total load with max. grid load 100 kg Test area lighting: 3x halogen lamp 20 W, 12 V Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoint values Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature range: -40°C to +180°C Nominal voltage: 400V 3/N 50Hz Rated power: 10.4 kW Nominal current: 17.2 A Compressor: TFH2516Z Pipe feed-through NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, width 975, depth 2200 mm External dimensions: Height 1950, width 1290, depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) < 55 dB(A) Weight: approx. 1200 kg The following information is for your safety as a buyer! Bdsdpjup T Uqofx Aczok The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, mileage: 139,000 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, first registration: 05/2022, next inspection (TÜV): 05/2026, emission class: euro6, color: white, number of seats: 3, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Mercedes-Benz 315 CDI SPRINTER STANDARD RWD 9G-TRONIC German vehicle from Mercedes Benz Leasing. One owner – excellent condition Fresh service – ALEX Unladen weight: 2,260 kg Gross weight: 3,500 kg Special equipment: Passenger airbag, Acoustic package, DAB tuner (digital radio reception), rear right entry handle on rear pillar, Suspension: Stabilization Level I, Vehicle without lowering feature, Rear doors (opening angle 270°), Hinged cover for storage compartment, Instrument cluster with color display, Fuel filter with water separator, Radiator grille frame painted in vehicle color, Conduit at rear door portal, Conduit at side wall, Side marker lights, Front engine PTO with bracket for additional coolant compressor, MBUX multimedia system (10.25" touchscreen with navigation), Fog lamps with cornering light, Park Assist package, Smoker’s package, Spare wheel (same as driving wheels), Spare wheel mount under frame end (incl. jack), Windscreen wiper with rain sensor, Driver cabin seats: double passenger bench, Driver cabin seats: heated driver’s seat, Driver cabin seats: Comfort shock-absorber seat (driver’s side), Driver cabin seats: low-profile seat box (driver), USB port in middle under dashboard (charging only), Rear wall trim, Jack, Heat-insulating glass (windscreen with top filter strip) Additional features: Third brake light, Overhead storage above windscreen, Storage compartment below dashboard (passenger side), Rear tow hook, Adaptive brake light, Driver airbag, Hill start assist, Traction control (ASR), Washer fluid level indicator, Electrically adjustable & heated exterior mirrors (both sides), Outside temperature display, Brake assist, Automatic driving light activation, Grab handle for sliding door at load bulkhead, Electronic brake force distribution (EBV), Assistance system: Breakdown management, Assistance system: Crosswind assist, Exterior noise reduction, GTronic automatic transmission (9-speed), Body/structure: Standard van, Keyless start, Child lock, Communication module (LTE) for digital services, Main fuel tank: 71 liters, Full bulkhead, Steering wheel (mechanically adjustable column), Headlight range adjustment, Truck registration, Mercedes-Benz emergency call system, Engine 2.0L – 110 kW CDI CAT, Wheelbase 3,665 mm, Low emissions according to Euro 6d standard, Sliding door on right in load/passenger compartment, Seat belt warning system (passenger side), Seat belt warning system (driver side), Upholstery: fabric, Steel wheels 6.5x16, Start/stop system, AGM battery 92 Ah, Service interval display (Assyst), Permissible gross weight 3.5 t Bdedpfx Acexri D Hezjk * Sales consultant info * + * AN APPOINTMENT IS REQUIRED FOR TEST DRIVE OR VIEWING * + * Trade-in and financing possible. * Subject to possible input errors. * Please check the features at your appointment. Subject to errors and prior sale.

Year of construction: 2010, condition: used, Used machine Used Schneider screw compressor type AIRMASTER AM 7-10 with Schneider DK 985 ECO refrigerated compressed air dryer and compressed air tank. Year of manufacture: 2010 Compressor technical data: Volume flow: 930 l/min Final compression pressure: 10 bar Motor power: 7.5 kW Refrigerated dryer technical data: Air volume flow: 985 l/min Max. operating pressure: 16 bar Refrigerant: R134a Air connection: 3/4'' internal Power consumption: 0.3 kW Compressed air tank technical data: Tank volume: 270 l Max. operating pressure: 16.5 bar Availability: by arrangement Location: Flörsheim Bdsdjxy Avlopfx Aczok

Condition: excellent (used), Year of construction: 2015, operating hours: 3,093 h, Make of engine: Deutz 6 cylinder CE mark: yes Technical condition: very good Bdodpoxykvajfx Aczek Visual appearance: very good Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Delivery terms: EXW Production country: SE Please contact Christiaan Dekker for more information Atlas Copco Boomer WE3 C30 Year: 2015 Hours: 3093 1000 volt CE certified Gross weight: 54.7 ton Diesel power180KW 6 cylinder engine Electric power 28KW/ 320Ampere Hydraulic tilt cabin Prepared for Leica GPS Rotary air drills COP 3038 drills Hydraulic waterbooster Hydraulic Compressor Hydraulic manbasket Tyres 90% good Price Euro. 129.000,-

Condition: repair required (used), piston compressor, compressor -Compressor: without function, sold as spare part -Handover in the current condition as viewed -Volume flow: 340 l/min -Max. pressure: 10 bar Bsdpsb A Sbwofx Aczsdk -Engine power: 4 kW -Tank capacity: 150 l -Dimensions: 1400/500/H900 mm -Weight: 180 kg

Condition: used, This ECADY 24L compressor is being auctioned in our industrial auction / machinery clearance auction, stock sale – individual/demo units in Oettingen (without VAT statement), online auction. Bedpfx Acox A Eb Aszjdk

Condition: excellent (used), Here we offer a Feutron climate test cell. Feutron climate test cell Temperature Temperature range: -40...90°C Climatic range (without heat load) 10...85°C Temperature difference,temporal during temperature operation ≤ ± 0.5 K/min. Temperature difference,temporal at climatic operation ± 1,0... ± 1.5 K/min Rate of change Heating 2.0 on average K/min Cooling 2,0 in average K/min The IEC 1646 standard can be realized with testing, solar modules with max. 160kg weight and non-linear ramps. (setpoint step change) can be realized Drying Air drying Condensation drying Humidity Humidification of air Steam humidification Humidity range 10... 95 % r.h. Humidity difference,temporal ≤ ± 3,0... ±5.0 %r.H. Dew point range 8... 80,9 °C Test room Test room volume 7.0m³ Dimensions Test room dimensions width 1500 mm x height 2250 mm x depth 2000 mm Revolving door DIN right heated,i,l.. width 900 mm x height 2100 mm Viewing window, heated with darkening flap and lockable Width 500 mm x height 600 mm Feed-through opening 2x in front side right ∅ 75 mm Irradiation unit test room Cut-out 4x in side panel left for SC 2500 850 x 700 mm each Area to be irradiated when using SC 2500 1200 x 1200 mm Intensity of radiation at 1.0 m distance from wall 1000 ± 10% W/m² Lighting 1xhalogen lamp 200W Refrigeration system Bitzer compressor semi-hermetic 2-stage,air-cooled Condenser: split condenser (outdoor installation winter control) Refrigerant R507 /R23 Temperature control system Cooling brine medium Tyfocor / water Mixing ratio 50/50 Density of cooling brine 1,072 kg/dm³ Filling quantity approx. 80dm³ Bdjdpfxeklv H Ie Aczek Pyranometer Temperature range -40... 150°C Max. Radiation absorption 4000 W/m² Spectral range (50% points) 305... 2800nm Sensitivity (norminal) 7 µV/W/m² Power supply Test cell Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type fixed connection Max. simultaneous power requirement approx. 32.0 kW Supply line fuse 3 x 63, Char C (A) Power supply SolarConstant Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type Max. simultaneous power requirement approx. 30.0 kW Supply line fuse 3 x 63, Char C (A) Outer dimensions of the test cell complete with: Genset room/switch cabinet and control cabinet for SolarConstant 2500 Outer dimensions of aggregate room width 3440 mm x height 2580 mm x depth 2950 mm /switch cabinet width 2200 mm x height 1830 mm x depth 1100 mm Outer dimensions of condenser, split width 900 mm x height 950 mm x depth 2000 mm Mass of test cell, total approx. 2700 kg Mass of condenser, empty 153 kg Weight : 2700 Kg Type: 3707/06 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Year of construction: 2018, operating hours: 6,020 h, Field of application: Construction Serial number: APP52xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21882 Specifications: - 2018 model - Hours: 6020 - Humbaur chassis - 478 kW Bjdpexy Evbefx Aczsdk - 35 Bar - 2 axles - Air compressor - Weight: 9683 kg - Ready for delivery Hours: 6020 Own weight: Model: 2018 Atlas Copco Y35 LuftKompressor på Humbaur understell.

Condition: used, Year of construction: 2017, feed pressure / bar liter capacity / l Air consumption / m³/h Bedsxy S H Tjpfx Aczedk

Condition: good (used), Year of construction: 1999, Refrigeration dryer Manufacturer: KAESER Model: TE 121 Bodpfx Acettwzbozjdk Year of manufacture: 1999 Motor rated power: 2.1 kW Maintenance performed by Kaeser.

Condition: used, This ECADY Ultra Silent Compressor 6L is being auctioned in our industrial auction/machinery auction - assortment clearance, warehouse sale - individual/display units in Oettingen (without VAT statement), online auction. Bdedpfx Acjx A Ea Sezok

Condition: excellent (used), CTS Climate test chamber C-55/1000 Li water-cooled Temperature range: -50°C to +100°C Humidity range: 5 to 95% RH Dew point range: 5°C to +78°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type C -55/1000/Li 1) C means: climate 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C Climate tests: Temperature range +5 °C to +95 °C Humidity range 5% to 95% rel. humidity Dew point range +5°C to 78°C Temperature deviation ≤ ±1.0 K in time Humidity deviation ≤ ±3.0% relative humidity over time The technical data refers to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may influence the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: Bedpfx Acjva Hi Hjzjdk water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, This ECADY belt-driven compressor 90L, model: DH-40100, is being auctioned in our industrial auction/machinery auction for assortment clearance, warehouse sale - single/exhibition pieces in Oettingen (without VAT statement), online auction. Bodpfx Acjx A Earszsdk

Condition: used, Trumpf TRUMPF TruDisk 6602 (4C) High-Power Disk Laser with up to 6.6 kW Type: TruDisk 6602 (4C) The TRUMPF TruDisk 6602 (4C) is a high-performance disk laser offering approximately 6.6 kW of continuous power output – perfectly suited for welding, cutting, and surface treatment processes for metals such as steel, aluminum, copper, etc. System type: TruDisk 6602 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: November 2012 Drawing number: 20-10-02-A5 No further in-house inspection has been performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. Key Technical Features: • Power: Continuously adjustable from 80 W up to 6,600 W, max. 6.6 kW for machine tool applications • Beam quality: < 2 mm·mrad for excellent focus handling • Wavelength: 1030 nm (infrared), adaptable to green wavelength for specific models • Output options: Up to 4 laser outputs (4C) for simultaneous supply of multiple process cells • Cooling system: Integrated heat exchanger (up to 28°C inlet temperature), optional compressor cooling (up to 38°C) • Modular and service-friendly: Compact footprint (< 1 m²), modular components for fast maintenance and service Benefits & Applications • Maximum process stability: Real-time power regulation ensures reproducible results • Reflection resistance: Patented resonator design enables welding of reflective metals such as copper and aluminum • Industry 4.0 ready: Sensor-integrated monitoring system, OPC-UA interface for condition monitoring & predictive maintenance • Energy efficiency: Up to 50% reduction in power consumption thanks to intelligent pulse control and energy-saving modes • Versatility: Application range includes welding (including BrightLine for nearly spatter-free seams), cutting, hardening, casting processing, additive manufacturing, laser wire deposition welding, and more Suitable Use Cases: Ideally suited for industrial high-power laser applications: Bdsdpfswy Uyxjx Aczok Application | Features ---|--- Automotive structural part manufacturing | Deep penetration welding with high reproducibility Copper welding | Particularly suitable with green wavelength (> 95% spatter reduction) Remote hybrid welding | Fast processing of large surfaces with robust beam Additive manufacturing & hardening | Enabled by excellent beam quality and compact design Main Technical Data Property | Specification ---|--- Laser power | Up to 6,600 W (6.6 kW), continuous Beam quality | < 2 mm·mrad Wavelength | 1030 nm (infrared) Number of outputs (4C) | Up to 4 simultaneously usable fiber outputs Fiber connector diameter | 100–600 µm (depending on configuration) Beam delivery | Fiber-based, passive (no deflection mirrors required) Cooling | Water/air-cooled, internal or external chiller Dimensions | Approx. 1000 × 800 × 2100 mm (W×D×H, variant-dependent) Weight | ~800–1200 kg (excluding cooling) Power supply | 380 V - 10% ... 460 V +10%, 3-phase AC + PE, 38 kW / 41 kVA, 59 A / 400 V, 50–60 Hz Control | TruControl 1000/3000, OPC-UA interface Safety standards | Laser safety class 4 according to EN 60825-1 Weight: approx. 1200 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data. Information may be subject to alteration!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), CTS Temperature test chamber T-55/1000 Li water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type T -55/1000/Li 1) T means: temperature 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Bedovba Raepfx Aczodk Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS climate chamber climate test cell Here we offer a CTS climate chamber climate test cell. Available from mid-January 2023! Water cooled Bsdjip Dp Sopfx Aczedk Height adjustable! Footprint approx. (W x D x H): 3755x 3470x 2480 Test area approx. (W x D x H): 2500x 2720x 2200 Test space volume: approx. 15m³ Temperature range: -40°C to +140°C Temperature deviation 1 K temporally Temperature change speed in the average without heat radiation Measured in the supply air heating: 2 K/min Cooling: 1 K/min from +110°C to -35°C Climatic tests: Temperature range: +10 °C to +90 °C Humidity range . +30 % to +95% r.H. dew point range : +5°C to 89°C temperature deviation 0,5 K temporal Humidity deviation ±1- ±3% r.H. temporal nominal voltage: 400V 3/N, PE, 50 Hz rated power: 53,5 KW Rated current: 92,3 A Compressor: S6J-16.2 + chiller Refrigerant: R404A Weight 5500 kg Type: CW-40/16 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you Thermotron environmental test chamber. Thermotron Environmental Test Chamber Water Cooled Working volume: 227 liters Temperature uniformity: All models 0.7°C Temperature range: -70°C to + 180°C Temperature control tolerance: All models 0.3°C Shipping weight: approx 400 kg Internal dimensions width 610 mm x depth 610 mm x height 610 mm Outer dimensions width 890 mm x depth 1240 mm x height 1850 mm Humidity range: All models 10% to 98% RH Humidity control: All models 2.5% RH Heating capacity in minutes -65º to 71ºC: 17 Heating power in minutes -65º to 180ºC: 43 Bdsdpfx Acsmhfr Iszjk Heating power in minutes -40º to 85ºC: 16 Electrical requirements in full load amplifiers 230/3/60: 19 Electrical requirements in full load amplifiers 230/1/60: 25 Electrical requirements in full power amplifiers 220/1/50: 27 Cooling capacity in minutes 85º to -40ºC: 32 Cooling capacity in minutes 71º to -65ºC: 54 Cooling capacity in minutes 180º to -65ºC: 72 Compressor size: (2) -2 Hp Operating voltage: 400V 16.7 A Type: SM-8-8200 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Trumpf TruDisk 4002 (6 C) High-Power Solid-State Disk Laser with up to 4 kW The Trumpf TruDisk 4002 (6 C) is a state-of-the-art, efficient, and robustly built disk laser optimized for demanding industrial metalworking applications. Machine type: TruDisk 4002 (6 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: March 2016 Drawing number: 20-10-03-A204 No further testing was conducted in-house. Operating hours could not be read. The laser was operating flawlessly up until decommissioning. Features: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient, modular architecture - Ideal for a wide range of applications in the automotive industry, mechanical engineering, or surface processing Technical Highlights: - Power: From 80 W up to max. 4000 W in continuous operation (CW) - Wavelength: Approx. 1030 nm (Infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (benchmark for exceptional quality), often with a range of 2–25 mm·mrad - Output options: Modular configuration – up to 4 outputs possible (depending on series) Bdedjwzabqopfx Aczok - Optional cooling: Water-cooled, e.g., via KLH chiller or integrated heat exchanger/compressor - Modular design: Robust optical layout, efficient operation, power factor correction, energy-saving modes, PROFIenergy interface Typical Applications: - Laser welding (including hybrid or scanner-guided), e.g., for bodywork or gearboxes - Cutting / flame cutting of metals with high precision - Surface processing, coating applications, etc. – professional industrial use Supply voltage: 380 V (-10%) to 460 V (+10%), 3-phase AC + PE Frequency: 50 – 60 Hz Power consumption: 22 kW / 23 kVA Rated current: 325 A at 400 V Protection class: IP54 Short-circuit resistance: Icn / SCCR 50 kA Weight: 850 kg Condition: Used Scope of delivery: (See images) (Specifications subject to change and errors excepted!) Should you have any further questions, feel free to contact us by phone.

Condition: used, Trumpf TRUMPF TruDisk 4002 (4 C) High-Performance Solid-State Disk Laser with up to 4 kW Output Bdodpfx Acswzahdjzsk Type: TruDisk 4002 (4 C) The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution – ideal for industrial manufacturing environments with demanding requirements for quality, precision, and automation. The combination of high power, excellent beam quality, and smart factory features makes it particularly attractive for modern production lines. System type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: May 2012 Drawing number: 20-10-02-A3* No additional tests were carried out in-house. Operating hours could not be read out. The laser operated flawlessly until decommissioning. Technical features: Output & wavelength: 80–4000 W at 1030 nm Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad, depending on configuration) Modular & compact: footprint < 1 m², modular design simplifies maintenance/service Efficient energy & cooling systems: energy-saving modes, active power factor correction, pulse function to reduce consumption Flexible cooling: integrated heat exchanger (5–28 °C), optional with compressor (up to 38 °C inlet temperature) Reflection-resistant: special resonator design also suitable for highly reflective metals Industry 4.0 capable: extensive sensor technology and data interfaces for condition monitoring, OPC UA, predictive maintenance Application areas: Scanner & hybrid welding (e.g. automotive body manufacturing, shipbuilding) High-speed cutting, including on reflective metals Flame cutting & surface processing Laser cladding, hardening, deep penetration welding where high precision is required Technical data: Supply voltage: 380 V (-10%) to 460 V (+10%), 3AC + PE Frequency: 50 – 60 Hz Power consumption: 23 kW / 25 kVA Rated current: 34 A at 400 V Protection rating: IP 54 Short-circuit strength: Icn / SCCR 50 kA Weight: 850 kg Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) We would be happy to answer any further questions by phone.

Condition: used, Trumpf Trumpf TruDisk 4002 (6 C) High-Power Solid-State Disk Laser with up to 4 kW The Trumpf TruDisk 4002 (6 C) is a state-of-the-art, efficient, and robustly engineered disk laser optimized for demanding industrial metalworking applications. System type: TruDisk 4002 (6 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Bdodpswzaiusfx Aczsk Year of manufacture: March 2016 Drawing number: 20-10-03-A204* No further in-house inspection was performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. It offers: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient, modular architecture Ideal for diverse applications in the automotive industry, mechanical engineering, or surface processing. Technical Highlights: - Power: From 80 W up to max. 4000 W in continuous operation (CW) - Wavelength: Approx. 1030 nm (infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (a benchmark for excellent quality), typically ranging from 2–25 mm·mrad - Output options: Modular configuration – up to 4 outputs possible (depending on model) - Optional cooling: Water-cooled, e.g. via KLH chiller or integrated heat exchanger/compressor - Modular design: Robust optical configuration, efficient operation, power factor correction, energy-saving modes, PROFIenergy connectivity Typical applications: - Laser welding (also hybrid or scanner-controlled), e.g. bodywork or gear assemblies - Cutting / flame cutting of metals with high precision - Surface processing, coating applications, etc. – for professional industrial use Supply voltage: - 380 V (-10%) to 460 V (+10%), 3-phase + PE - Frequency: 50 – 60 Hz - Power consumption: 22 kW / 23 kVA - Rated current: 32.5 A at 400 V - Protection class: IP 54 - Short-circuit strength: Icn / SCCR 50 kA - Weight: 850 kg Condition: used Scope of supply: (see picture) (Subject to modifications and errors in technical data and specifications!) We are happy to answer further questions for you by phone.

Condition: excellent (used), CTS Climatic test chamber T-70/600 water-cooled Temperature range: -70°C to +180°C Rated voltage: 400V 3/N PE 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Control system: -Microprocessor-controlled control and monitoring system Simple, user-friendly terminal built into the door. -Digital temperature setpoint and actual value display Simple variation via +/- button -Digital input for temperature in °C -PLC compatible -Up to 100 test programs possible -RS 232 interface -2 free switching channels for on-site test material control Insert grid: Stainless steel, contact surface 820 x 710 mm Load per grid max. 35 kg Total load with max. grid configuration 100 kg Cooling unit: Water-cooled, low-noise, fully hermetic Infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 Temperature tests: Temperature range -70 °C to+ 180 °C Temperature deviation ±0.1 to 10.3 K in time Rate of temperature change according to DIN 50 011, part 12 measured in the center of the test room Heating 2.5 K/min Cooling 2 K/min Heat radiation max. 1500 W at +20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x Dx H) External dimensions 1050 x 1850 x 1900 mm (W x DxH) Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current: 10.2 A Protection class IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Bdjdpfxsvaxq Ne Aczjk Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, CTS Type: TS -70/600-13 Temperature test chamber, water-cooled Type series: TS -70/600-13 Control system: - 32 bit controller - LCD control panel - Digital display of setpoints and actual values - Numerical input of setpoint values - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Test chamber volume: 600 liters Test chamber dimensions: Height approx. 730 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 2250 mm, width approx. 1300 mm, depth approx. 2475 mm Temperature range: -70 to +180°C Heating speed: 13 K/min at -40°C to +120°C Cooling speed: 13 K/min at 120°C to -40°C Temperature deviation: ± 0.1K temporal, ± 0.5 K spatial Electrical connection 400/3P/N/PE Nominal power: approx. 27.8 kW Nominal current: approx. 44.1 A Compressor: 4TC-8.2Y/4PC-10.2Y Refrigerant: R-404 A / R-23 Weight: 1350 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: Bdedpfx Acsvcyawjzek 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), We offer here a Beko adsorption air dryer. BEKO activated carbon adsorber CLEARPOINT 2X times DRYPOINT dust filterS075RFWMX Kondensomat Bekomat 20 FM KA20K1ZAR BEKO activated carbon adsorber CLEARPOINT 2X Type: Beko adsorption dryer Bdsdponyh Tysfx Aczsk Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Bodpfx Acexdi Ezjzedk Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), Year of construction: 2022, ICS Cool Energy Type: IC 305 Year of manufacture: 2022 ICS Cool Energy i-Chiller IC 305 – Industrial Water Chiller 8 kW For sale is a compact industrial water chiller (process chiller) of the type i-Chiller IC 305 by ICS Cool Energy. This unit is ideally suited for cooling machinery, processes, or laboratory applications. Features / Equipment: - Integrated hydraulic system (including pump, expansion tank, etc.) - Robust “coil-in-tank” evaporator system for high operational reliability - Compact, space-saving design - Plug-and-play installation – immediately ready for use Bodpfx Aew S Txisczedk - Suitable for a wide range of applications: plastics processing, food industry, breweries, recycling, laboratories, and more. Technical details - Cooling capacity: 8 kW (nominal output) - Power consumption: 3.64 kW - Energy efficiency (EER): 2.85 - Power supply: 400 V ± 10 %, 3-phase + PE, 50 Hz - Max. ambient temperature: 46 °C - Compressor(s): 1 unit - Refrigerant: R410A - Tank volume: 115 l - Dimensions (L×W×H): 660 × 1315 × 1420 mm - Noise level: 81 dB(A) sound power, 53 dB(A) sound pressure - Weight (operating weight): approx. 220 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change or error!) For any further questions, please contact us by phone.