Used Condensate for sale (876)

Condition: used, This listing is for the KSA SQ1E Steam Quality Test Kit. The system is in excellent working condition and ready for immediate use. ----- System Overview The KSA SQ1E is a portable, air-cooled steam quality testing unit designed for performing Non-Condensable Gas (NCG), Dryness, and Superheat tests in compliance with EN 285 and HTM standards. It provides a complete, self-contained solution for validating clean and pure steam systems used in pharmaceutical, biotechnology, and healthcare facilities. Unlike traditional systems, the SQ1E uses a built-in electric fan condenser, removing the need for cooling water and allowing tests to be carried out anywhere with minimal setup. The compact and durable design makes it ideal for on-site steam testing, validation, and qualification work. ----- Main Components KSA SQ1E Steam Quality Test Unit – fully air-cooled condenser assembly with built-in burette and measuring cylinder for NCG and dryness testing. Dryness and Superheat Test Assembly – includes test expansion tube, pitot tubes, flask, and temperature probe connections. Integrated Burette and Measuring Cylinder – illuminated and fitted with push-button zeroing and pause functions for precise readings. Power Supply – 12 V DC operation for the condenser fan and internal electronics. Steam Connection Set – includes tri-clamp and hose fittings for connection to clean steam systems. Portable Case – compact and rugged housing with handle and workspace shelf for field testing. Operating Manual and Documentation – includes standard test procedures, setup guidance, and result templates. ----- Key Features Air-cooled condenser design eliminates the need for external cooling water. Performs all required steam quality tests: Non-Condensable Gases, Dryness, and Superheat. Built-in burette and measuring cylinder for accurate, repeatable measurement. Push-button zeroing, pause function, and backlit illumination for ease of use. Portable, plug-and-play design ideal for site validation and testing. Complies fully with EN 285, HTM, and pharmaceutical clean steam standards. ----- Specifications Manufacturer: KSA (Keystone Scientific / KSA Pharma) Model: SQ1E Type: Steam Quality Test Kit Power Supply: 12 V DC Gtedexqqyyepfx Abdjt Cooling Method: Air-cooled, fan-assisted condenser Functions: NCG, Dryness, Superheat testing Operation: Manual/portable Compliance: EN 285, HTM, AAMI, PDA guidelines Construction: Stainless steel and aluminium components in rugged portable case

Condition: good (used), Emulsion splitting plant, oil-water separation system -The cost-effective and permanently reliable Godpfx Abob A S I Hedott The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations regarding sewer discharge. -Dimensions: 750/350/H830 mm -Weight: 10 kg

Condition: new, Year of construction: 2025, - Demonstration machine from 2025 completely made of stainless steel including Washing pump - Automatic basket drive - Touch button for turning the basket outside the Cleaning procedure - Tank cover and sieve filter under the basket stainless steel - Protection against dry running - Door security switch - Connections for plate phase separator (oil separator) - Inner basket width 1180 mm - Usable height of the basket to the lower edge of the nozzle holder 675 mm - Flat jet nozzles Gtjdpfeg Hgcwsx Abdjt - washing pressure 4 bar - Return bend as a condenser for little water consumption - including 20 KG LCT Power Star 50-730 - delivery after receipt of payment within 5 - 6 weeks - 24 months guarantee

Condition: used, Little used 11.6 MW Condensing Steam Turbine Generator, TGM Kanis Turbinen GmbH, 2017 Reported to have less than 100 operating hours due to project cancellation. Includes turbine, synchronous generator, auxiliaries, and controls. Turbine Manufacturer: TGM Kanis Turbinen (Germany) Type: CT32-54 Condensing Steam Turbine Year: 2017 Live Steam Conditions: 43 bar @ 398 °C Exhaust Conditions: 0.064 bar @ 38 °C Power Output: Max continuous 11,615 kW Speed: 7,200 rpm Generator Manufacturer: Elin Motoren Type: HTM290E04, synchronous generator Rating: 14,631 kVA Voltage: 11,000 V Current: 768 A Frequency: 50 Hz Enclosure: IP54 Weight: 30,600 kg Year: 2017 Auxiliaries Gjdpfx Aoxvq Nrobdstt Voith Turbo I/P Converter Type: DSG-B07143 Supply voltage: +24 VDC Input pressure: 8 bar Output pressure: 2–5 bar Sirocco Cooling System Type: 2x16 KDL-E-50-2-1850-2-1.8 Motor power: 253 kW Air flow: 29,664 m³/h (65/35 °C, 2x0.065 kPa) Water flow: 2×25 m³/h (25/29 °C, 10 kPa) Pressure: 10–15 bar Controls Turbine control system included. Turbine was intended to be fed by boiler (not included in sale) with steam production capacity of 52570 kg/hour.

Condition: good (used), mileage: 328,619 km, power: 350 kW (475.87 HP), first registration: 03/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,850 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2023, Equipment: AdBlue, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, navigation system, parking heater, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, - Adaptive cruise control - Aluminum fuel tank - Leaf suspension - Bluetooth - Brake booster - EPS (Electric Power Steering) - Remote central locking - Low noise - Speed limiter - Intarder (retarder) - Load protection grid - Particulate filter - Radio/CD player - Rain sensor - Sliding roof - Sleeper cab - Side door - Seat heating - Sun visor flap - Lane keeping assist - Auxiliary heater (parking heater) - Toolbox - Xenon lighting Front axle: Steered; Suspension: Leaf springs Rear axle: Suspension: Air suspension Unladen weight: 8,250 kg Payload: 12,250 kg gross vehicle weight (GVW): 20,500 kg APK (Technical Inspection): valid until 03/2026 Technical condition: good Optical condition: good Reference number: 74 Vehicle number: 74 Mercedes Benz Actros 5 / 2148 / Mirror CAM / BigSpace / Euro 6 VIN: W1T9634051C054039 Suspension: Leaf / Air Transmission: Automatic Air conditioning Engine brake Cruise control Auxiliary heater (parking heater) Distance control assist Lane keeping assist Navigation system Emission standard EURO 6 2 x Tank Special Equipment: Axle load - measuring system, Front axle load 8.0 t, trailer socket 15-pin + 7+7-pin, Audio system: DAB/DAB+ digital radio, Equipment package: Media, Equipment package: Safety, Equipment package: Storage, 220 Ah (AGM) battery, Air horn, Driver assistance system: High beam assist and cornering light, Driver’s cab: air-suspended, Suspension: Front springs 8.0 t, 2 leaf, fire extinguisher, 12-speed transmission - Type: G 281-12, Rear lights LED, Integrated rear, folding table by window ledge, automatic climate control, 3-part mudguard, Fuel tank: 630 L aluminum, left, Fuel tank: auxiliary tank 430 L aluminum, right, cooler/refrigerator, roof and side air deflectors (lockable), mounting plate / saddle plate 40 mm for fifth wheel coupling 20 t, reinforced engine brake, wheelbase variant 3850 mm, rear overhang 1050 mm, smoker package, rain sensor, tire pressure monitoring system, acoustic reverse warning with external hazard warning lights, fifth wheel coupling: manual lubrication, MirrorCam switch at bed, electric glass sliding/tilting roof, additional remote key (2), fleet management interface, drawers under window ledge, co-driver seat upholstery: velour, driver seat upholstery: velour, seats in cab: comfort air-suspended driver’s seat, steel rims 11.75x22.5 (front axle), electric parking air conditioning, external storage hatch left, socket 12V / 15A in co-driver footwell (extra), sleeper cab curtain, seat belt warning system Gtodex Urc Hspfx Abdjt Further Equipment: Emission standard EURO 6, Axle configuration: 4x2, Actros 5, Actros cab L, heated entry/front mirrors, trailer electrical and brake connection (low), trailer socket 24V/15-pin, entry step left side of cab, exhaust outlet right side, Equipment package: Powertrain 2, exterior mirror camera MirrorCam, side-by-side battery arrangement, rear axle differential lock, 12th gear torque increase, compressed air port in cab, steel air tank, air unit with condensate monitoring, standard air unit, automatic driving light activation (light sensor), Driver assistance system: Attention Assist (fatigue detection sensor), Driver assistance system: Autonomous emergency brake assist (Active...

Condition: used, Year of construction: 2015, functionality: fully functional, input voltage: 230 V, overall weight: 31 kg, workpiece weight (max.): 2 kg, travel distance X-axis: 100 mm, travel distance Z-axis: 30 mm, power: 0.3 kW (0.41 HP), Equipment: documentation/manual, type plate available, Model IM-6225 Type Measurement Unit Image Sensor 1" 6.6 megapixel monochrome CMOS Gtjdpfjx S D I Ajx Abdjt Display 10.4" LCD monitor (XGA: 1024 x 768), external monitor connectable (clone output) Light-collecting Lens Dual telecentric lens Image Measurement Field of View Wide field: ø100×L200mm High Accuracy: □25×L125mm Minimum Display Unit 0.1 µm Repeatability Without Stage Movement Wide field: ±1µm High Accuracy: ±0.5µm With Stage Movement Wide field: ±2µm High Accuracy: ±1.5µm Measurement Accuracy (±2σ) Without Clamping Wide field: ±5µm*1 High Accuracy: ±2µm*2 Height Measurement Measurement Area - External Remote Input Non-voltage input (contact or solid-state) External Output OK/NG/FAIL/MEAS. Relay output / Max. load: 24 VDC 0.5A / ON resistance: 50 mΩ or less Interface LAN RJ-45 (10BASE-T / 100BASE-TX / 1000BASE-T) USB 2.0 Type A 6 ports (front: 2, rear: 4) Storage Hard Disk Drive 250 GB Illumination System Transmissive Telecentric transmissive illumination (green LED) X Axis Support Travel Range 100 mm (motorized) Z Axis Support 30 mm (motorized) Max. Load 2 kg Power Supply Voltage 100 to 240 VAC 50 / 60 Hz Power Consumption 310 VA max. Environmental Resistance Ambient Temperature +10 to +35 °C Ambient Humidity 20 to 80 % RH (non-condensing) Weight Approx. 31 kg

Condition: used, This listing is for the ATI Porta Sens 11 Gas leak detector The unit is in full working condition and is ready for immediate use Key Specifications (PortaSens II) Gtjdpfxexv Dh Ie Abdet Sensor Compatibility: Accepts H10 “Smart Sensor” modules for detecting over 30 different gases, including toxic, flammable gases, and oxygen. Range & Accuracy: Accuracy typically within ±5% of the measured value (dependent on sensor). Display: Backlit graphics LCD for clear visibility in varying lighting. Alarms: Three levels of gas concentration alarms, low flow alarm, and low battery alarm. Sampling Modes: Supports both instantaneous and timed sampling. Data Logging: Stores up to 12,000 data points with customizable intervals (1–60 minutes). Power Supply: D-cell alkaline battery (75 hours) and NiCad rechargeable backup (6 hours). Pump: Internal rotary vane pump (~400 cc/min flow rate). Operating Range: -25°C to 55°C; 0–95% RH (non-condensing) Size & Weight: 3.5″ W x 9″ H x 5.5″ D; ~7 lbs

Condition: good (used), mileage: 142,351 km, power: 84 kW (114.21 HP), first registration: 06/2018, fuel type: diesel, wheelbase: 3,400 mm, fuel: diesel, fuel tank capacity: 70 l, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro6, number of seats: 3, total length: 5,300 mm, total width: 1,900 mm, total height: 1,990 mm, Year of construction: 2018, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), full service history, navigation system, onboard computer, power assisted steering, power mirror, sliding door, soot filter, traction control, trailer coupling, = Additional options and features = - Alarm system - Armrest - Auto-dimming interior rearview mirror - AUX input - Outside temperature display - Cup holder - Bluetooth - DAB radio - Tachometer - Third brake light - Driver airbag - Height-adjustable driver’s seat - Remote central locking - Tinted glass - Rear doors - Height-adjustable steering wheel - Cabin - Folding exterior mirrors Gjdpfxex Dtwzj Abdott - Air conditioning - Metallic paint - Rear parking sensors - Particulate filter - Radio/CD player - Spare wheel - Disc brakes - Partition wall - USB port - Immobilizer - Bulkhead without window = Remarks = VW Transporter L2, model year 06/2018. Light damage to front right, potentially drivable. The following parts need to be replaced: right front fender, front bumper, air filter housing, bonnet, right headlight. Radiator, intercooler, and condenser are undamaged! First registration in the Netherlands, full service history, manuals and vehicle registration documents available. Equipment: CarPlay, air conditioning, rear parking assistance, navigation system, cruise control, electric windows, electrically adjustable exterior mirrors. For more photos or information, please contact us by email at or by phone at . Our full offering can be found at = Further information = General information Cab type: single Technical details Number of cylinders: 4 Engine displacement: 1,969 cc Maximum front axle load: 1,550 kg Maximum rear axle load: 1,550 kg Weights Unladen weight: 1,857 kg Payload: 943 kg gross vehicle weight: 2,800 kg Consumption Average fuel consumption: 6.2 l/100km Urban fuel consumption: 7.3 l/100km Extra-urban fuel consumption: 5.6 l/100km Maintenance APK (Roadworthiness inspection): valid until 04/2026 History Booklets: Available (dealer-maintained) Condition Technical condition: good Visual condition: good Damage: Damaged vehicle (not drivable) = Company information = Nidro cars Holland is located in the centre of the country and is the right place for the purchase of your car, van, or truck. The indicated price is the 'internet takeaway price.' For questions or to book a test drive, please contact us: SEE OUR FULL STOCK AT All types of trade are possible with us! (Our advertisements are compiled with great care, but no rights can be derived from the content.)

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVDPump support benchATEX: Ex-d-IIB-T4 – IP55Power: 11 kWAtmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter Gedpfxox R D Efs Abdjtt G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: like new (used), Year of construction: 2018, machine/vehicle number: IntNr231087, IntNo231087 AR FILTRATIONI S.R.L. 1449 Oil/emulsion mist extraction system Extraction unit series ARNO 2: Mechanical AR 5-stage air cleaner for emulsion mist/oil smoke Air flow rate 2600 m3/h (1.5kW) Voltage Frequency 230/400 50 V Hz Noise level dBa approx. 70 Stage 1- Centrifugal condenser, self-cleaning Stage 2 - Metal mesh filter, washable Stage 3 - Pocket filter Stage 4 - Fine filter mat, washable Stage 5 - Hepa ultra-fine filter Filter performance of the entire unit: up to 99.97% - Quick and easy maintenance, once a year, high operational reliability - Robust design, low space requirement - Recovery of up to 80% of the condensed cooling lubricant - Design and function in accordance with current standards - Energy savings of approx. 415.00 euros per air purifier - Reduction in emissions of 9,000 kg CO2/year/system - Protects the sensitive parts of the machine tool - Protects the environment and people Dimensions: approx. 990 x 570 x 1400 [mm] Weight: approx. 120 [kg] Delivery time at short notice by arrangement. The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved! IntNo231084 AR FILTRATIONI S.R.L. Extraction series ARNO 2: Mechanical AR 5-stage air purifier for emulsion mist/oil smoke Air flow rate 2600 m3/h (1.5kW) Voltage Frequency 230/400 50 V Hz Noise level dBa approx. 70 Stage 1- Centrifugal condenser, self-cleaning Stage 2 - Metal mesh filter, washable Stage 3 - Pocket filter Stage 4 - Fine filter mat, washable Stage 5 - Hepa ultra-fine filter Filter performance of the entire unit: up to 99.97% - Quick and easy maintenance, once a year, high operational reliability - Robust design, low space requirement - Recovery of up to 80% of the condensed cooling lubricant - Design and function in accordance with current standards - Energy savings of approx. 415.00 euros per air purifier - Reduction in emissions of 9,000 kg CO2/year/system - Protects the sensitive parts of the machine tool - Protects the environment and people Gjdpfx Abjx U Dhnsdett Dimensions: approx. 990 x 570 x 1400 [mm] Weight: approx. 120 [kg] Delivery time at short notice by arrangement. The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: good (used), mileage: 238,784 km, power: 350 kW (475.87 HP), first registration: 05/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,850 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2023, Equipment: AdBlue, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, navigation system, parking heater, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, - Adaptive cruise control - Aluminium fuel tank - Leaf spring suspension - Bluetooth - Brake booster - EPS (Electric Power Steering) - Remote central locking - Low noise - Speed limiter - Intarder - Load protection grille - Particulate filter - Radio/CD player - Rain sensor Gjdex Urcyspfx Abdett - Sliding roof - Sleeper cab - Side door - Seat heating - Sun visor - Lane keeping assistant - Auxiliary heater (parking heater) - Toolbox - Xenon lighting Front axle: Steered; Suspension: Leaf spring Rear axle: Suspension: Air suspension Unladen weight: 8,250 kg Payload: 12,250 kg Gross vehicle weight: 20,500 kg APK (Main technical inspection): valid until 06/2026 Technical condition: good Optical condition: good Vehicle number: 105 Mercedes Benz Actros 5 / 2148 / Mirror CAM / BigSpace / Euro6 Chassis no.: W1T9634041C057286 Suspension: leaf / air Transmission: automatic Air conditioning Engine brake Cruise control Auxiliary heater (parking heater) Adaptive cruise control Lane keeping assistant Navigation system Emission standard: EURO 6 2 x fuel tanks Special equipment: Axle load - measuring device, front axle load 8.0 t, trailer socket 15-pin + 7+7-pin, Audio system: digital radio DAB / DAB+, Equipment package: Media, Equipment package: Safety, Equipment package: Storage, Battery 220 Ah (AGM), Air horn, Driver assistance system: main beam assist and cornering light, Cab: with air suspension, Suspension: front springs 8.0 t, 2-leaf, Fire extinguisher, 12-speed gearbox - Type: G 281-12, LED tail lights, Integral rear, Folding table in console, Automatic climate control, 3-piece mudguards, Fuel tank: 630 l aluminium, left side, Additional fuel tank: 430 l aluminium, right side, Cool box / refrigerator, Roof air deflector (adjustable) and side deflectors, Mounting plate / fifth-wheel plate 40 mm for 20 t fifth wheel coupling, Reinforced engine brake, Wheelbase variant 3,850 mm, Frame overhang 1,050 mm, Smoking package, Rain sensor, Tyre pressure monitoring system, Acoustic reverse warning and external warning hazard light (external warning signal), Fifth wheel coupling: manually lubricated, MirrorCam switch at bed, Electric sliding/lifting roof (glass), Spare key with remote (2), Fleet management system interface, Drawers under console, Seat cover/upholstery: passenger seat velour, Seat cover/upholstery: driver seat velour, Cab seats: driver's comfort air suspension seat, Steel wheels 11.75x22.5 (on front axle), Electric auxiliary air conditioning, External storage hatch left, Additional socket 12V / 15 A in passenger footwell, Sleeper cab curtain, Seat belt warning device Further equipment: Emission standard: EURO 6, Axle configuration: 4x2, Actros 5, Actros cab L, Heated entry/front mirrors, Trailer electrical and brake connection low, Trailer socket 24V / 15-pin, Entry step driver's cab left, Exhaust outlet to right, Equipment package: Powertrain 2, Exterior mirror camera MirrorCam, Batteries mounted side by side, Rear axle differential lock, 12th gear torque increase, Compressed air connection in cab, Steel compressed air tank, Condensate monitoring unit for compressed air, Medium compressed air unit, Automatic driving light activation (light sensor), Driver assistance system: Attention Assist (fatigue detection sensor), Driver assistance system: Autonomous emergency braking system (Active Brake Assist 5), ...

Condition: used, This listing is for the Hanwell 4000 Wireless Transmitter The unit is in full working condition and is ready for immediate release Key Features: Single & Dual Channel Options: Choose between single or dual thermistor channels to suit your monitoring needs. ​ LCD Display: Equipped with an LCD display showing real-time data readings and battery life. ​ Temperature Range: Measures temperatures from -40°C to +60°C, accommodating various storage conditions. ​ Long-Range Wireless Transmission: Utilizes low-power radio technology with a transmission range of up to 3 km over open ground. ​ Battery Life: Powered by a 3.6V AA lithium battery​ Memory Capacity: Stores up to 100,000 readings for single-channel units and 50,000 readings per channel for dual-channel units. ​ Applications: Ideal for monitoring temperatures in fridges, freezers, and chillers. ​ Compatible Sensors The transmitters are compatible with various thermistor probes, available separately, to meet specific monitoring requirements. ​ Specifications at a Glance Feature Specification Dimensions 110 x 80 x 35 mm Weight 200 grams Power Supply 3.6V AA Lithium Battery Battery Life Up to 2 years Operating Range 0°C to +60°C (non-condensing RH environment) Storage Range -40°C to +60°C Accuracy ±0.1°C Radio Frequency 433–458 MHz (country-specific) Radio Power 10 mW Radio Range Up to 3 km over open ground IP Rating IP30 Gtedpfx Aexv D H Rebdjt

Condition: used, Year of construction: 2003, Manufacturer : Martin Christ Gefriertrocknungsanlagen GmbH Model: EPSILON 2-6D Year: 2003 Type : Laboratory and pilot freeze-dryer Applications: Dry or liquid drying in vials, bottles, ampoules, flanges, trays, etc. Examples of products: Biological products: bacteria, viruses, tissues, plant extracts / Pharmaceutical products: plasma, serum, antibodies, vaccines / Biochemical tests / Food products: ferments, vitamins General data : Pre-freezing, freeze-drying (sublimation) and final drying Vacuum application, < -10°C 3 + 1 shelves Shelf surface area: 0.3 m². Distance between shelves: 68 mm Software: SCADA Software Cleaning flange Sample extraction system Manual stopper for vials Ice condenser : Capacity: 8.0 kg Performance: 6.0 kg / 24 h Temperature: -75°C Dimensions : Width: 800 mm Depth: 840 mm Height: 1640 mm Weight: ~650 kg Energy data : Power supply: 3-phase, 400 V / 50 Hz Power consumption: max. 5.0 kVA Max. ambient temperature: +25°C Refrigerant : Types : R404A, R508, Isceon 89 Gjdpfjx R Dlfsx Abdott Heat transfer fluid: Syltherm XLT Technical connections Warm water inlet: ½" hose connection Defrost water drain: ½" hose connection Vacuum exhaust: DN 25 stainless steel pipe Ventilation: DN 6 connection Others : Documentation and qualifications available Sold with LPC plus computer for data analysis. Spare parts

Condition: good (used), mileage: 312,660 km, power: 350 kW (475.87 HP), first registration: 04/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,850 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2023, Equipment: AdBlue, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, navigation system, parking heater, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, - Adaptive cruise control - Aluminium fuel tank - Leaf suspension - Bluetooth - Power brake booster - EPS (Electronic Power Steering) - Remote central locking - Low noise - Speed limiter - Retarder - Load protection grille - Particulate filter - Radio/CD player - Rain sensor - Sliding roof - Sleeper cab - Side door - Heated seats - Sun visor - Lane keeping assistant - Auxiliary heater - Toolbox - Xenon lighting Front axle: Steering; Suspension: Leaf spring Rear axle: Suspension: Air suspension Unladen weight: 8,250 kg Payload: 12,250 kg gross vehicle weight: 20,500 kg APK (Technical Inspection): valid until 04/2026 Technical condition: good Optical condition: good Vehicle number: 103 Mercedes Benz Actros 5 / 2148 / Mirror CAM / BigSpace / Euro 6 .: W1T96340X1C054926 Suspension: Leaf/Air Gedpfx Aex Urctjbdott Transmission: Automatic Air conditioning Engine brake Cruise control Auxiliary heater Proximity control assistant Lane keeping assistant Navigation system Emission standard EURO 6 2 x tank Special equipment: Axle load measuring system, front axle load 8.0 t, 15-pin + 7-pin trailer socket, Audio system: digital radio DAB / DAB+, Equipment package: Media, Equipment package: Safety, Equipment package: Storage, Battery 220 Ah (AGM), air horn, Driving assistance system: high-beam assistant and cornering light, Cab: with air suspension, Suspension: Front springs 8.0 t, 2-leaf, Fire extinguisher, 12-speed transmission - Type: G 281-12, LED rear lights, integrated rear section, Folding table at console, Automatic air conditioning, 3-piece mudguards, Fuel tank: 630 L aluminum, left, Auxiliary fuel tank: 430 L aluminum, right, Coolbox / refrigerator, Roof and side air deflector (adjustable), Mounting plate / fifth wheel plate 40 mm for fifth wheel coupling 20 t, Enhanced engine brake, Wheelbase option 3850 mm, Rear overhang 1050 mm, Smokers package, Rain sensor, Tire pressure monitoring system, Acoustic reversing warning and warning beacon (external warning signal), Fifth wheel coupling: manual lubrication, MirrorCam switch at the bed, Electric sliding/tilting glass roof, Additional remote control key (2), Fleet management system interface, Drawers under console, Upholstery: passenger seat velour, Upholstery: driver’s seat velour, Cab seats: comfort suspension driver seat, Steel rims 11.75x22.5 (front axle), Electric stand-alone air conditioning, External storage hatch, 12V/15A socket in passenger footwell (additional), Sleeper cab curtain, Seat belt warning system Additional equipment: EURO 6 emission standard, Axle configuration: 4x2, Actros 5, Actros cab L, Heated approach/front mirror, Trailer electrical and brake connections low, Trailer socket 24V / 15-pin, Cab entry left, Exhaust to right outside, Equipment package: Powertrain 2, MirrorCam exterior camera, Batteries installed side by side, Rear axle differential lock, 12th gear torque increase, Air supply in the cab, Steel air reservoir, Condensate monitored air unit, Standard air unit, Automatic driving light activation (light sensor), Driver assistance system: Attention Assist (fatigue detection sensor), Driver assistance system: Autonomous emergency brake assist (Active Brake Assist 5),...

Condition: used, This listing is for the Hitech Instruments GIR250 Gas Analyser The unit is in full working condition and is ready for immediate use The GIR250 is a bench‑top / transportable analyser designed to measure oxygen (O₂) and carbon dioxide (CO₂) simultaneously in gas samples. It is made by Hitech Instruments (now part of the MTL / Eaton group). Its design emphasizes ease of use, reliability, and low maintenance cost. Other supporting features: The instrument can be programmed with pass/fail criteria for each gas (alarms). It provides analog outputs, typically 4–20 mA, for external logging or control systems. Calibration is designed to be simple (via the front panel keypad) to reduce training burden. The O₂ galvanic cell is user-replaceable (i.e. maintenance can be performed in the field). Mechanical, Electrical & Operational Details The GIR250 is housed in a rugged, transportable case (lab-style) so it can be used as a benchtop or mobile analyser. Sample inlet and outlet connections use 0.25″ (~6 mm) tubing. Gtjdpfsxhdqtex Abdot The sample system should avoid condensation and contaminants; non‑condensing sample environment is required. Operating ambient temperature: –5 to +40 °C (for non‑condensing conditions) Power / interface: standard for bench‑top analysers (the catalogue doesn’t always detail it, but likely mains or DC supply, suitable for lab use) Typical Applications & Suitability Because it can measure both O₂ and CO₂ in a single unit, the GIR250 is used in applications such as: Respiration / breathing gas analysis / Douglas bag analysis (i.e. in physiological or experimental gas mixture measurement) Fermentation / bioprocess monitoring (where O₂ and CO₂ both matter) Gas mixture / inertisation / process gas quality (checking gas purity, calibrating mixtures) It is not primarily intended for measuring very low trace levels (ppm-level) of O₂ or CO₂ unless its ranges are suitably adapted or specified. The design is more for percent-range analysis

Condition: good (used), mileage: 237,675 km, power: 350 kW (475.87 HP), first registration: 03/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,850 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2023, Equipment: AdBlue, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, navigation system, parking heater, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, - Adaptive cruise control - Aluminum fuel tank - Leaf suspension - Bluetooth - Power brake booster - EPS (Electronic Power Steering) Gedpfx Aox Urcmobdott - Remote central locking - Low noise emission - Speed limiter - Intarder - Load protection grid - Particulate filter - Radio/CD player - Rain sensor - Sliding roof - Sleeper cab - Side door - Seat heating - Sun visor - Lane keeping assist - Auxiliary heater (parking heater) - Toolbox - Xenon lighting Front axle: Steered; Suspension: Leaf springs Rear axle: Suspension: Air suspension Unladen weight: 8,250 kg Payload: 12,250 kg Gross vehicle weight: 20,500 kg APk (Main technical inspection): valid until 03/2026 Technical condition: good Visual condition: good Vehicle number: 102 Mercedes Benz Actros 5 / 2148 / Mirror CAM / BigSpace / Euro 6 .: W1T9634011C054040 Suspension: Leaf / Air Transmission: Automatic Air conditioning Engine brake Cruise control Auxiliary heater (parking heater) Distance control assist Lane keeping assist Navigation system Emission standard EURO 6 2 x tanks Special equipment: Axle load measuring device, Front axle load 8.0 t, Trailer socket 15-pin, 7+7-pin, Audio system: Digital radio DAB/DAB+, Equipment package: Media, Equipment package: Safety, Equipment package: Storage, Battery 220 Ah (AGM), Compressed air horn, Driver assistance system: High-beam assist and cornering light, Cab: air-sprung, Suspension: Front springs 8.0 t, 2-leaf, Fire extinguisher, 12-speed transmission - Type: G 281-12, LED tail lights, Integral rear end, Folding table at ledge, Climate control, 3-piece fender, Fuel tank: 630 l aluminum, left, Additional tank: 430 l aluminum, right, Cool box / refrigerator, Roof air deflector (adjustable) and side deflectors, Mounting/Fifth wheel plate 40 mm for 20 t fifth-wheel coupling, Reinforced engine brake, Wheelbase variant 3,850 mm, Frame overhang 1,050 mm, Smoker's package, Rain sensor, Tire pressure monitoring system, Acoustic and warning flasher reverse warning (external warning signal), Fifth wheel: manually lubricated, MirrorCam switch on bed, Electric sliding/tilting roof (glass), Additional remote control keys (2), Fleet management system interface, Drawers below ledge, Seat cover/upholstery: passenger seat velour, Seat cover/upholstery: driver's seat velour, Seats in cab: driver’s comfort suspension seat, Steel rims 11.75x22.5 (front axle), Electric stand-alone air conditioning, External storage flap left, Socket 12V/15A in passenger footwell (additional), Curtain for sleeper cab, Seatbelt warning system Further equipment: Emission standard EURO 6, Axle configuration: 4x2, Actros 5, Actros L cab, Heated step/front mirror, Trailer electric and brake connection low, Trailer socket 24V/15-pin, Entry on left of cab, Exhaust to the right, Equipment package: Powertrain 2, Exterior mirror camera MirrorCam, Side-by-side batteries, Rear axle differential lock, Gear torque increase 12th gear, Compressed air connection in cab, Steel air tank, Air unit with condensate monitoring, Medium air unit, Automatic headlights activation (light sensor), Driver assistance system: Attention Assist (fatigue detection sensor), Driver assistance system: Autonomous emergency brake assist (Active Brake Assist 5), ...

Year of construction: 2014, condition: used, This listing is for 1 of 2 Mueller PyroPure P7310 Pure Steam Generator. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. The “Turned on Time”of the unit is 65,000 hours, but as this unit is 1 of 2 generators in an alternating system it does not indicate the "Steam Production Time". The sites steam requirements were low therefore the unit is in immaculate condition. They have full maintenance records backed up on their electronic technical system supplied as an extra by Freestead. This Unit is fitted with a Allen Bradley Compact Logix PLC and Panel View plus 1000 HMI's The Unit is supplied with- ⦁ Feed water pump system ⦁ Pure steam condensate sampling system ⦁ Pure steam analyser ⦁ Stainless steel sheathing and frame ⦁ Feed water analyser Gedpfx Abjxv Af Sodjtt ⦁ Degasser The Mueller PyroPure P7310 Pure Steam Generator is a high-performance system designed to produce pyrogen-free pure steam suitable for the most demanding applications, such as pharmaceutical production, biotechnology processes, and healthcare sterilization. Built to meet or exceed U.S. Pharmacopoeia (USP) standards, the P7310 combines precision engineering, advanced technology, and robust materials to ensure consistent performance and reliability. They are CE marked and compliant with 3.1B material certification. The terms pure steam and clean steam are often used interchangeably in the pharmaceutical industry. However, not all equipment marketed as clean steam generators are up to the task of producing WFI quality pharmaceutical pure steam. Mueller pure steam generators use a tangential nozzle to provide separation of impurities from incoming feed water, producing pyrogen-free steam that, when condensed, meets USP requirements for water for injection. Key Benefits Superior Steam Quality: Produces pyrogen-free steam that meets USP requirements, ensuring safety and regulatory compliance. Optimized for critical applications like autoclaves, clean room humidification, and steam-in-place (SIP) sterilization. Achieves a 5 Log reduction in contaminants, which corresponds to a 99.999% reduction in microbial populations. This level of reduction ensures the highest degree of sterilization, making it ideal for pharmaceutical and biotechnology applications where absolute purity is critical. Efficient Design: External evaporator allows easy access for inspection and maintenance, reducing downtime. Separation column has no internal components requiring maintenance, eliminating potential for bacterial growth. Efficient heat transfer with a double-tube sheet evaporator minimizes stress cracking and maximizes performance. Ease of Maintenance: All critical components can be serviced with only 24" of clearance around the system. Fully drainable design prevents standing water, reducing contamination risks. Polished 316/316L stainless steel construction ensures durability and easy cleaning. Enhanced Operational Features: Minimal instrumentation is required, reducing complexity and operational costs. Simplified control with an Allen-Bradley PLC system, compatible with Ethernet for integration with facility systems. Certified elastomers (USP Class VI) provide enhanced compatibility with feed water and product. Specifications Performance: Pure Steam Capacity: from 0 to 700 kg/hr at optimal feed water conditions. Operating Pressure Range: Pure steam output pressure up to 50 psig. Mater...

Condition: used, This listing is for the Partical Measuring Systems LASAIR lll 310c particle measuring systems The unit is in full working condition and is ready for immediate release The Lasair® III 310C is a state-of-the-art portable aerosol particle counter designed to meet the stringent requirements of highly regulated environments. Manufactured by Particle Measuring Systems (PMS), it sets the standard for portable particle counters, ensuring that your environment remains clean and compliant.​ Key Features Particle Size Range: 0.3 to 25.0 µm Flow Rate: 1.0 CFM (28.3 LPM) ±5% Counting Efficiency: Complies with ISO 21501-4 requirements Display: 8.4" color VGA IR touch screen (IP65 rated) Data Storage: Up to 3,000 complete data sets Connectivity: Ethernet, Modbus TCP/IP, RS-232, USB data downloading; optional wireless Ethernet Environmental Inputs: Four 4-20 mA inputs for external sensors Power Options: Operates on AC power or hot-swappable batteries Compliance: Meets ISO 14644-1, EU GMP Annex 1, and ISO 21501-4 standards Software Compatibility: Supports FacilityNet, PharmaceuticalNet, and FacilityPro for data analysis and reporting Reporting Capabilities: Cleanroom certification results are available through a local printout, downloadable via USB in a secure format, or through the use of external software packages Wireless Communication: Wireless network communications are facilitated with an externally mounted wireless adapter, simplifying communications with network systems ​ Specifications Dimensions: 30.1 x 32.7 x 25.9 cm Weight: 6 kg (without battery), 7.5 kg (with two optional batteries) Operating Environment: Temperature: 0 – 30°C; Humidity: 5 – 95% RH non-condensing Sample Tubing: Supports 3/8", 1/2", and 3/4" tubing up to 8 meters in length Gtedpfexv A T Nox Abdst Sample Output Filtering: Internally filtered to >99.97% at 0.3 µm

Condition: used, This listing is for the Eppendorf thermostat C Dry Block Heater The unit is in full working condition and is ready for immediate release Description Peltier technology enables comfortable and precise temperature control from -10°C to +110°C Heating and active cooling in all common vessel and plate formats from 5μL to 50mL Precise maintenance of various temperature levels Reliable prevention of condensate formation with optional ThermoTop™ (tect™) lid Highly flexible due to large selection of exchangeable SmartBlocks Dry incubation for improved lab hygiene Simple and intuitive operation due to predefined temperature keys (4, 16, 37, 56 and 95°C) Individually store up to 15 programs Comprehensive range of program functions Eppendorf Thermostat C is the ideal device to accurately set and maintain temperatures. The ThermoStat C features excellent temperature management. Peltier technology provides the comfortable and precise temperature control of all conventional lab vessels. The operation is easier and more intuitive than ever before. Predefined temperature keys provide quick access to five important experimental temperatures. Due to comprehensive program functions, you can also individually store 15 programs. With an extensive range of exchangeable SmartBlocks, the ThermoStat C adapts to any application. Key Features Heating and active cooling in all common vessel and plate formats from 5 μL to 50 mL Gtsdpfx Aoxwc Nmjbdet Excellent temperature management Precise temperature control from -10°C to 110°C (110°C can be set when using the 12 mm and cryo SmartBlocks.) Precise maintenance of various temperature levels Reliable prevention of condensate formation with the optional ThermoTop® (tect) lid Maximum flexibility thanks to large selection of exchangeable SmartBlocks™ Dry incubation for improved lab hygiene Simple and intuitive operation due to predefined temperature keys (4°C, 16°C, 37°C, 56°C and 95°C) Comprehensive range of program functions 2 second block exchange due to quick release system of SmartBlock

Condition: used, This listing is for the Smeg GW1160 Glassware Washer The unit is in full working condition and is ready for immediate use Smeg GW1160 Glassware Washer – Overview The Smeg GW1160 is a compact, high-performance laboratory glassware washer engineered for precision cleaning, thermal disinfection, and drying of laboratory glassware. It’s particularly suitable for critical cleaning applications in biotechnology, pharmaceutical, and research labs. Key Features Washing Temperature: Up to 95°C for thermal disinfection. Microprocessor Control: Programmable electronic control system with 9 default programs and 6 customizable (free) programs. RS232 Serial Port: Enables data logging or printer/PC connection for traceability. Active Thermodynamic Drying: Ensures fast and thorough drying of internal surfaces. High-Efficiency Ecoslim Steam Condenser: With cold water injection for effective drying and steam management. Chemical Dispensing: Alkaline powder detergent dispenser. Peristaltic pump for acid liquid neutralizer. Two additional peristaltic pumps can be installed. Washing Chamber: Made of AISI 316L stainless steel for corrosion resistance and hygiene. External Panels: Constructed from AISI 304 stainless steel. Two Independent Washing Levels: Accessible via telescopic guides, suitable for various glassware sizes. Built-in Water Softener: With salt sensor to optimize cleaning and prevent scaling. Gtedpfxexhgd Nj Abdot Dual Water Connections: Compatible with cold water and demineralized water. Technical Specifications External Dimensions (W x D x H): 600 x 605 x 850 mm Internal Chamber Dimensions (W x D x H): 525 x 490 x 570 mm Weight: ~74 kg Electrical Options: 400V (3-phase, 7.0 kW) 230V (single-phase, 2.8 kW)

Year of construction: 2014, condition: used, This listing is for a Full Mueller PyroPure WFI System. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. This system is in immaculate condition as the sites steam requirements were “Turned on Time”of the Steam Generator's is 65,000 hours, but as this unit is 1 of 2 generators in an alternating system it does not indicate the "Steam Production Time". The Mueller PyroPure WFI System stands out as a high-performance, integrated solution for the pharmaceutical and biotechnology industries, focusing on the production, storage, and distribution of ultra-high-purity Water for Injection (WFI). Below is an in-depth look at its components, capabilities, and specifications. Key Components 2x Mueller P7310 Pure Steam Generator High Capacity: Generates from 0 to 700 kg/hr of pure steam, suitable for high-volume operations. Operational Flexibility: Can operate alternately with another unit of the same model, maximizing efficiency and reducing downtime. Regulatory Compliance: Meets USP WFI standards, ensuring suitability for pharmaceutical applications. Maintenance-Friendly Design: Features an external evaporator for easy access and servicing, minimizing contamination risks. Advanced Control: Equipped with an Allen Bradley Compact Logix PLC and an intuitive operator interface terminal (OIT) for real-time monitoring and control. Safety Mechanisms: Includes pressure relief valves and temperature controls to ensure safe operation. Energy Efficiency: Designed to optimize energy consumption, especially when alternating operations between units. Durable Construction: Made from high-quality stainless steel for longevity and hygienic conditions. 1x Mueller P4003 Pure Steam Condensing System Condition: This unit is in full working condition and ready for immediate release. Installed new in 2015 by Freestead Process Technology. Gtjdoxv Af Espfx Abdet Capacity: Produces 100 gallons per hour (379 litres per hour) of WFI-quality distillate, with a pure steam inlet capacity of 807 lb/hr (366 kg/hr). Compliance: Meets stringent USP WFI standards, is CE marked, and FDA compliant with 3.1B material certification. Core Features: Utilizes a tangential nozzle design for superior impurity separation. Drainable components to minimize contamination risks, with electro-polished 316/316L stainless steel ensuring hygienic operation. Easy maintenance due to a removable tube bundle in the condenser and minimal instrumentation, requiring just 24 inches of clearance for service. 1x Ormandy Newade WFI Storage Vessel Condition: This 2000L WFI storage vessel is also in full working condition, installed in 2015 by Freestead Process Technology. Capacity: Perfectly balances storage efficiency for mid-sized operations with its 2000 litres capacity. Design Flexibility: Available in both horizontal and vertical configurations, customisable based on specific facility layouts. Material Excellence: Made from high-grade austenitic and Duplex stainless steel, ensuring durability and resistance to corrosion. Compliance: Adheres to key industry standards such as PD5500, ASME VIII, and EN 13445, and is CE marked under the Pressure Equipment Directive. 1x Fristam FPE742/185A Centrifugal Pump Condition: This robust 5.5KW sanitary pump is operational and ready for immediate use, also installed in 2015 by Freestead Process Technology. Hygienic Design: Features close internal clearances (as ...

Condition: used, This listing is for the Julabo FL601 Recirculating The unit is in full working condition and is ready for immediate use The Julabo FL601 is a recirculating chiller engineered for routine cooling applications in laboratories and process environments. Designed for space-saving integration, energy efficiency, and ease of operation, the FL601 delivers precision temperature control with an extensive range of safety and connectivity features. Performance & Control Temperature Range: −20 °C to +40 °C Temperature Stability: ±0.5 °C via microprocessor PID control Cooling Capacity: Up to 600 W at +20 °C Pump Flow Rate: Up to 23 L/min at 1 bar Return Line Temp Limit: +80 °C The FL601 features reliable PID temperature control, making it suitable for continuous operation in demanding environments such as analytical instrumentation, rotary evaporators, and closed-loop process cooling. Design & Ergonomics The FL601 emphasizes ease of use and maintenance: Splash-proof keypad with large, bright LED display Accessible top-mounted filling port with lift-up cover Second hinged document tray for the user manual or install documents Removable front venting grid for quick cleaning of the condenser Front-facing drain tap for easy fluid replacement Integrated stainless steel bath tank with level indicator Compact footprint with front and rear ventilation only — no side vents — allowing side-by-side placement with other devices Smart Features & Connectivity RS232 interface for PC/lab system connectivity Potential-free alarm output (max. 30 VA) for external device integration IP21-rated housing (IEC 60529) for splash protection Optical and audible low-level alarm system for added safety Key Advantages at a Glance Feature Benefit Microprocessor PID control Stable, accurate temperature regulation Front-facing vents Space-saving design; units can be placed side-by-side Easy access filling & draining- Reduces downtime for maintenance Integrated stainless steel bath tank Corrosion-resistant and durable Audible/visual alarms Ensures safe operation and early fault detection RS232 & alarm contact Ready for system automation and remote monitoring Quiet operation (~55 dBA) Suitable for sensitive lab environments Robust construction (~48 kg) Long-lasting performance in daily use Common Applications Rotary evaporators Refractometers Spectrophotometers Gedpfx Ajxhf A Djbdstt Distillation units Jacketed reactors Heat exchangers Laser cooling and OEM equipment support

Condition: used, This listing is for a CFS Protemist DT II Automated Protein Synthesizer Abnova presents a new generation, fully automated robotic desktop protein synthesizer, Protemist® DT II, for high throughput eykaryotic protein production. The system is developed and manufactured by CellFree Sciences Co., Ltd. It synthesizes the protein of interest using a special wheat germ lysate and a bi-layer reaction. Protemist® DT II can run two scales of translational reaction, 1.2 ml (24 well) or 6 ml (6 well). Batch affinity purification is available for affinity tagged fusion protein synthesized in 6-ml (6 well) reaction scale. This is an expert system in transcription, translation, and purification. The protocol and automation is designed for easy operation obviating the need for manual handling and production. Specifications Dimensions: 79cm(h) x 50cm(d) x 70cm(w) Weight: 100 kg Power: 100~240 V 50/60 Hz Voltage Fluctuation Tolerance: ±10% Power Consumption: 350 VA Max. Number of Samples Per Run: 6 samples: transcription, translation and affinity purification (6 ml/sample) 24 samples: transcription, translation (1.2 ml/sample) Processing Volumes: 100 ul to 800 ul Reagent Unit: Temperature Control Method: Peltier moduleTemperature Setting: 4°C (Fixed) Dispensing Volume Variation: Within ±5%, CV < 1% (in dispensing 100 µl distilled water) Ambience for Installation: 15~30°C, humidity < 75%, dew condensation to be avoided Gtjdpfx Aoxzh Ucsbdet

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 with OneTouch ES The Life Technologies Ion OneTouch 2 with Ion OneTouch ES comprises two modules: the Ion OneTouch™ 2 Instrument and the Ion OneTouch™ ES (enrichment system). It simplifies the workflows by providing an automated solution for scalable and reproducible template preparation. It is used for DNA sequencing in healthcare, lab and life sciences. It streamlines the overall Ion semiconductor sequencing workflow, yielding significant time savings and increasing sequencing productivity. The system enables parallel template processing with sample sequencing on the Ion Proton™ or Ion PGM™ sequencers. This reduces the time from sample to sequence to a single day and enables processing of multiple samples per day. The combination of Ion semiconductor sequencing and the Ion OneTouch™ 2 System maximizes the speed of each experiment and minimizes the overall time to completion for each project. The modular design also allows for QC of Ion Sphere™ particles, to maximize experimental control and the success of each experiment. Features: Integrates multiple manual template preparation workflows into a single system Enables parallel processing of multiple samples per day through modular design Supports scalable template preparation for all Ion semiconductor sequencing chips Supports up to 400 bases on the Ion PGM™ System and up to 200 bases on the Ion Proton™ System Includes a full thermal cycling modality for amplification for quick optimization of thermal cycling parameters Employs a peristaltic pump fluidic system that eliminates the need for gas Fits easily on any benchtop with its small instrument footprint Specifications: Weight, OneTouch 2 23 lbs. (10.4 kg.) Weight, OneTouch ES 12 lbs. (5.4 kg.) Dimensions, OneTouch 2 12" W x 16" D x 14" H (30 x 41 x 36 cm) Gjdpfjxzg Ubox Abdott Dimensions, OneTouch ES 9.5" W x 12.5" D x 11" H (24 x 32 x 28 cm) Operating Humidity 20%-80% (non-condensing) Operating Temperature 15°C-25°C Multiplex Capability Up to 384 barcoded libraries High Throughput Compatibility Automated Protocols, Multiplexing, High Throughput-Compatible Power 100-240 VAC, 50/60 Hz, 5.5 A max

Condition: used, This listing is for 1 of 2 Grant-Bio PHMP Thermo-Shaker Excellent temperatures uniformity across the platform/microplate (patented bi-directional heating of microplates) combined with variable speed and variable temperature produces the ideal thermoshaker for microplate incubations. Can be used with all types of standard depth microplates and offers three devices in one for maximum versatility and efficiency. A microplate thermoshaker A compact benchtop incubator without shaking A microplate shaker in cold or ambient temperatures Features Temperature setting range: + 25°C to 100°C Temperature stability ± 0.1°C, temperature uniformity ± 0.2°C due to the bi-directional heating system (platform and lid) Shaking speed: 250 to 1200rpm Rapid heat-up Continuous or timed operation, with alarm buzzer and automatic switch-off facility Choice of two models with capacity for two (PHMP) or four (PHMP-4) 96- or 384-well microplates The heated lid completely covers the flat heating plate to provide bi-directional heating and excellent temperature stability and uniformity, whilst preventing condensation Combination of bi-directional heating and powerful orbital shaking capability produces the maximum yield from incubations Very easy to operate, with simple set-up of temperature, shaking speed and time via push buttons and the 2-line LCD status display Dimensions (h x d x w) - 125 x 250 x 265mm Temperature range - +25 to 60°C Temperature control range - Ambient +5 to 60°C Stability - 0.1°C Uniformity - 0.25°C Display - 2 line x 16 character LCD Shaking speed - 250 to 1200rmp Speed setting resolution - Increment 10rpm Gtedpexzgvfsfx Abdot Average heat up speed - 12 minutes from 25 to 37,35 minutes from 25 to 60 Maximum height of microplates - 18mm Capacity - 2 microplates Orbit diameter - 2mm Timer - (with auto-off and audible alarm) 1 minute to 96 hours (1 minute increment) External power supply - Input AC 120-230V, 50/60Hz Output DC 12V Power consumption - 40W (3.3A) Weight - 6.1kg