Used Condensate for sale (878)

Condition: good (used), Condensate drain, pressure reducing valve, condensate drain, valve, check valve, control valve Gsdpfxsb A S Epo Abdeil -230 VAC/50-60 Hz Temperature: 1 °C/ 60 °C -Nominal pressure: min. 1 max. 16 bar -Capacity: 22 L/h Price: per piece -Quantity: 2 available -Weight: 2.8 kg

Year of construction: 1996, condition: excellent (used), Used condensate vessel Manufacturer: Gestra Year of manufacture: 1996 Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Gisdjiz A Tzepfx Abdjl Loading possible

Condition: good (used), Ultrafilter ultraaqua autoclean 0016 AC Donaldson Ultrafilter ultrafiltration system for compressed air compressor condensate Oil/water separator for compressed air condensate. Godpfx Abeidx Uisdeil ● Treatment plant for separating compressed air condensate and condensates with difficult separation properties (e.g. stable emulsions) by means of cross-flow filtration ● Physical separation principle guarantees residual oil content of < 5 mg/l in water Intelligent control concept with programmable control for safe analog operation, incl. plain text display by means of text display, Fault monitoring via alarm messages with potential-free contacts and optional external network connection Optimized cleaning by comparison of input/output extends cleaning intervals and saves operating costs ● Thermally and chemically highly resistant ceramic membrane with long service life ● Antifreeze protection with integrated heating ● High-quality, corrosion-resistant materials for vessels, piping, pumps, seals, and valves Manufacturer: Donaldson Ultrafilter System type: ultraaqua autoclean 0016 AC Electrical data: 3 x 380 V, 50 Hz, 2.6 kW Compressed air: pmin: 5,5 bar, pmax: 8,5 bar, Pneurop 4 Water: pmax: 5 bar Membrane: pHmin: 1, pHmax: 11, tmin: 5°C, tmax: 70°C You can find additional filtration systems in other sizes—new and used—in our shop! International shipping costs upon request!

Year of construction: 2025, condition: new, functionality: fully functional, Efficient and gentle removal of excess liquid instead of long draining times: Gsdpfxoxc T Nus Abdoil The pressure dewatering unit has been specially designed to efficiently remove excess liquid from preserved vegetables as well as pickled or thawed vegetables. The machine is easy to operate and can be handled by a single person. The product to be dewatered, such as canned mushrooms, pickled or thawed vegetables, is placed into the perforated crate. Once the system is started, a plate is lowered onto the product. The product is gently dewatered by applying uniform pressure over this plate. Efficient dewatering and minimal space requirement! The processing of pickled, thawed, or preserved vegetables is simplified and accelerated, as prolonged draining times are eliminated by efficient dewatering through gentle pressing. Due to its compact design, the machine requires minimal space and can therefore be easily integrated into various areas of production. Adjustable working pressure: approx. 6 bar Dimensions (LxWxH): 700x650x1200 mm Weight: approx. 150 kg

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. 1 unit Aftercooler Type WFN009 DHH16 Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1,020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm + 1 unit Water Separator Type CSP 008 Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Gijdpfjdzqn Ujx Abdel Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available

Condition: good (used), Condensate drain, pressure reducing valve, condensate drain, valve, check valve, control valve -Manufacturer: Bekomat Ecoair, condensate drain type KA02 ACO AO / AK 05 -Voltage: 230 VAC/50 Hz Gjdpfxjvuzpke Abdsil Temperature: 1 °C/ 60 °C -Nominal pressure: max. 16 bar -Quantity: 3 available Price: per piece -Transport dimensions: 220/140/H150 mm -Weight: 1.6 kg/pc.

Year of construction: 2006, condition: excellent (used), 1.CestraLOOS 800l, 0,1Bar 2nd Flowserve Cestra Power 400kw Content 15l Gsdofm Rumspfx Abdjil Y.O.M. 2006 3.Cestra YY,1997 Power 400kw Content 18l 4.cestra condensate collection tank YY,1996 capacity 250l

Condition: good (used), Air conditioner, air conditioning, condensate pump for air conditioning, defrost water pump -Air conditioners -Manufacturer: Eckerle Gedjd Dcf Hopfx Abdsil -Type: EE2000 -Number: 1x pumps available -Price per piece -Dimensions: 150/190/H80 mm -Weight: 0.5kg

Condition: used, Synthesis reactor Comprising : - Two mixing and distillation reactors 1000 litre - One condensate collection vessel 200 litre - Four washing units 6 litre Gisdpfjx Niy Sjx Abdsl - One condenser - Two VERDER pneumatic diaphragm pumps - Two heating skids - One refrigeration unit

Condition: new, table width 3000 mm table length 1500 mm burner heads 1 Control CNC feed 20.000 mm/min total power requirement 15 kVA dimensions of the machine ca. 4,5 x 2,5 m * Heavy machine bed with precision guides for quiet movement machine * A ball bearing cross carriage for height adjustment with 400mm vertical Hub * Thermal separation of the drive and cutting areas ensures the highest precision * Automatic height finding and torch height control during cutting * Torch holder with collision protection and automatic shutdown in the event of a collision * Installation or implementation of the machine using the plug & play method with a forklift, Ant or crane possible * 3-sided accessibility to cutting area through boom design SATOTEC suction table: The SATOTEC table system is characterized by a stable table construction max. cutting thickness of 150 mm. For cutting a workpiece thickness of 150 mm, oxyfuel cutting technology is required. The workpiece support frame has interchangeable ones placed at a 45° angle and 3 mm thick flat iron slats. The distance between the slats is 50 mm. Power source Kjellberg Q1500: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm both dry and under water * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, increase possible with ProPierce Technology * Marking, notching and punching, including coated metallic materials * Inverter power source with digitally controlled, fully electronic process flow * Integrated cooling with partially automated filling and emptying Gas control: Fully automatically controlled, processor-controlled plasma all-gas console Q- Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Extraction TEKA EcoCube 5.5 kW Medium to be filtered: dry, fat-free or oil-free dust/smoke Filter area: 100 m² (4 cartridges of 25 m²) Filter cartridge: BIA M, Type Nano Degree of separation: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan performance: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz. Current consumption: 11.5 A Current type: 3Ph+N+PE Fan structure: on the system, including silencer duct bend, right side Motor control: frequency converter Noise level: 75dB(A) + max 10 dB(A) with cleaning pulse Gsdpfx Abspm U U Nodeil Intake port: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: Light gray - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Locking hooks and toggle locks - Compressed air connection and condensate drain each mounted with one Bulkhead fitting - Compressed air connection with hose nozzle d=8mm - Provide the system with grounding bolts - Cable in UL version - EATON frequency converter on the left in the attached control cabinet

Condition: used, This listing is for a Eppendorf ThermoMixer C Mixer. The unit is in full working condition and is ready for immediate release. The Eppendorf ThermoMixer C is a versatile and compact laboratory instrument designed for precise heating, cooling, and mixing of biological samples. Its advanced features and flexibility make it ideal for a wide range of laboratory applications. Key Features: - Heating and Cooling:Temperature Range: Operates from 15°C below room temperature (RT) to 100°C. - Heating Rate: Achieves up to 7°C/min when using SmartBlock plates. - Cooling Rate: Reduces temperature by up to 2.5°C/min from 100°C to RT. - Mixing Performance: Mixing Frequency: Adjustable between 300 and 3,000 rpm, suitable for various vessel types and applications. Giodpfx Abjxxx Sasdsl - Mixing Orbit: Provides a uniform 3 mm orbit for efficient sample mixing. - Mixing and Vortexing Radius: Ensures thorough mixing with a 1.5 mm radius. - Precision Temperature Control: - Accuracy: Ensures precise temperature control with an accuracy of ±0.5°C between 20°C and 45°C. - Timer Functionality:Adjustable Timer: Can be set from 15 seconds to 99 hours and 30 minutes or for continuous operation. - Flexibility:Interchangeable SmartBlocks: Offers 11 SmartBlock options to support all common lab vessels and plates, from 5 µL to 50 mL. - Condensation Prevention: Compatible with the Eppendorf ThermoTop (tect®) to prevent condensation and ensure sample integrity. - Simple and Intuitive Operation: - Predefined Program Keys: Facilitates quick and easy setup for common applications. - USB Connectivity: Includes a USB interface for data management and connectivity. Benefits: - Outstanding Precision: High performance in mixing and temperature control ensures reliable and reproducible results. - Versatile Compatibility: Suitable for plasmid, RNA, and DNA purification, cDNA synthesis, enzymatic reactions, bacterial growth, and protein/DNA/RNA denaturation. - Anti-Spill Technology: Prevents lid wetting and cross-contamination for enhanced sample protection. - Compact and Low Noise Design: Compact dimensions (20.6 × 30.4 × 13.6 cm) and low operating noise provide a stress-free workspace. - Cost-Effective Maintenance: Durable design and affordable, easy-to-replace SmartBlocks reduce operating costs. Applications: - The Eppendorf ThermoMixer C is ideal for laboratories requiring precise heating, cooling, and mixing capabilities for molecular biology, biochemistry, and life science applications. Its intuitive design and flexibility ensure dependable and reproducible results across a wide range of workflows.

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. System described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Gsdpfx Absw U A Hbodsil Full documentation for equipment available.

Condition: used, This listing is for the Techne TC 3000 Well Thermal Cycler The unit is in full working condition and is ready for immediate use The Techne TC‑3000 (models FTC3/02 and FTC3/05) is a compact, robust, and cost-effective PCR thermal cycler, ideal for personal use, educational settings, and basic molecular biology research. Despite its small footprint, it delivers high performance, reproducibility, and flexibility. Key Features Compact and Low Cost One of the smallest and most affordable thermal cyclers on the market. Weighing ~5 kg with a footprint of just 33 × 17 cm, it's perfect for labs with limited space. Available with interchangeable blocks: FTC3/02: 25 × 0.2 mL microtubes FTC3/05: 20 × 0.5 mL microtubes Godpfxoxhfzas Abdeil Fast Peltier-Based Cycling Efficient thermal transfer with rapid heating (up to 3.6 °C/s) and cooling (up to 2 °C/s) using advanced Peltier elements. Heated Lid with Selectable Temperature Adjustable from 100–115 °C, the heated lid minimizes condensation and reduces the risk of sample evaporation. It can be enabled or disabled as needed, making it suitable for a range of PCR tubes and strip types. Unparalleled Block Uniformity Delivers consistent results with ±0.1 °C block uniformity at 50 °C, ensuring optimal reproducibility across samples. Wide Temperature Range From 4 °C to 99 °C with precision control (±0.1 °C), supporting even demanding PCR protocols.

Condition: used, This listing is for a Hanna HI 93728 Nitrate-Nitrogen Photometer. The unit is in full working condition and is ready for immediate release. Overview of Nitrates and Measurement Importance Nitrates are naturally occurring compounds produced from the decomposition of organic matter or from fertilizers. However, they can be converted to nitrites, which pose health risks. Guidelines for Nitrate Levels: Global Maximum: 45 mg/L for nitrates in water. Europe: 50 mg/L for potable water. USA (EPA): 10 mg/L for nitrate nitrogen (NO₃-N), which equates to 45 mg/L of nitrates. Gedpfx Abjxxyimsdoil HANNA® HI 93728 and HI 93828 Meters These handheld meters are designed for field measurements of nitrate levels with ease and accuracy. Key Features: HI 93728 Meter: Measures nitrogen nitrate from 0 to 30 mg/L (NO₃-N). To convert to nitrate concentration, multiply the reading by 4.43, allowing a maximum reading of up to 133 mg/L of nitrate (NO₃). Measurement Range: 0.0 to 30.0 mg/L (NO₃-N) Resolution: 0.1 mg/L Accuracy: ±0.5 mg/L ±10% of reading Light Source: LED at 555 nm Light Detection: Silicon Photocell Battery Type/Life: 1 x 9V with approximately 40 hours of continuous use. Operating Environment: 0 to 50°C (32 to 122°F); RH max 95% non-condensing Dimensions: 180 x 83 x 46 mm (7.1 x 3.3 x 1.8 inches) Weight: 290 g (10 oz.) Method: Adaptation of the cadmium reaction method, producing an amber tint in the sample upon reaction with nitrate-nitrogen.

Condition: used, This listing is for a Star Lab C1000-STR-230EU Plate Centrifuge. The unit is in full working condition and is ready for immediate release. The plate centrifuge makes the safe and quick spin down of droplets and condensation very easy. Sealed plates are loaded vertically and surface tension keeps samples in place so there is no danger of spilling samples. The centrifuge accepts all plates up to 25 mm high. An optional adaptor is available for centrifuging 48-well PCR plates and 0.2 ml PCR tubes or strips. Less than quarter the size of most plate centrifuges Accommodates two plates Rapid start to stop Use before and after thermal cycling to increase PCR yield Accepts skirted, semi-skirted and non-skirted plates Easy cleaning and maintenance Gisdpfxjxx Aqts Abdel Rotor capacity: Two plates, any style, up to 25 mm high Power supply: 230 V, 50/60 Hz Permissible Relative Humidity: < 85% Dimensions (W × D × H) 190 mm × 210 mm × 193 mm

Condition: used, This listing is for 1 of 2 Applikon BioPilot 70L Fermenter. The unit is in full working condition and is ready for immediate use Overview The Applikon BioPilot 70L is a fully integrated, pilot-scale fermentation system designed for microbial and cell culture applications in research, development, and small-scale production. Manufactured by Applikon Biotechnology, a global innovator in advanced bioreactor systems, the BioPilot 70L offers exceptional flexibility, process control, and scalability—bridging the gap between laboratory and production environments. Key Features Advanced Bioprocess Technology Precision Control: Integrated control of key parameters such as pH, dissolved oxygen (DO), temperature, agitation, and feed rates. Scalable Design: Built to mimic laboratory-scale conditions, enabling seamless scale-up to production volumes. Modular Automation: Compatible with Applikon ez-Control, DeltaV, or Lucullus® PIMS for sophisticated process control and data management. High-Quality Construction 70L Total Volume (50L Working Volume): Ideal for pilot studies, process optimization, and small-batch production. 316L Stainless Steel Vessel: Electro-polished and cGMP-compliant for pharmaceutical and biotechnological use. Jacketed Design: Enables precise temperature control via thermal fluid circulation. Technical Specifications Model: BioPilot 70L Total Volume: 70 liters Working Volume: 50 liters (typical) Vessel Material: 316L stainless steel, electro-polished Control Options: ez-Control, DeltaV, Lucullus® Gsdsxhfngjpfx Abdjil Sterilization: In-situ sterilizable (SIP) and Clean-in-Place (CIP) compatible Ports: Multiple ports for probes, additions, sampling, gas inlets/outlets Applications Biopharmaceuticals: Production of recombinant proteins, enzymes, vaccines Industrial Biotechnology: Fermentation of bio-based chemicals and specialty metabolites Food & Beverage: Cultivation of probiotics and functional ingredients Academic & R&D: Process development, scale-up studies, and microbial strain screening System Components 70L stainless steel fermentation vessel (jacketed) Modular control tower or integrated skid system Peristaltic pumps for acid/base, antifoam, and nutrient feed Autoclavable or SIP-compatible sensors for pH, DO, temperature, and level Gas flow control via mass flow controllers (MFCs) or rotameters Harvest and sampling ports, exhaust condenser, and sterile connections Quality Assurance Applikon fermentation systems are engineered and manufactured under strict quality control standards, ensuring full cGMP and FDA compliance where required. Factory Acceptance Testing (FAT), documentation, and validation support are provided for regulated environments. Benefits Flexible Configuration: Customizable to meet process-specific requirements Reliable Scale-Up: Accurate replication of lab-scale conditions in pilot volumes High-Level Automation: Advanced monitoring and control systems for optimized yields Ease of Integration: Compatible with existing bioprocess infrastructure Compliance-Ready: Suited for regulated production and research environments Conclusion The Applikon BioPilot 70L Fermentation System is the perfect solution for companies and institutions needing a reliable, scalable, and compliant bioreactor platform. With precise control, robust construction, and full integration capability, it empowers bioprocess development from the lab bench to commercial readiness.

Condition: used, This listing is for the Olympus CX31RBSF Microscope The unit is in full working condition and is ready for immediate use Overview The Olympus CX31RBSF is an upright, binocular compound biological microscope, part of Olympus’s CX series known for its durable, ergonomic design and high-quality optics tailored for educational and routine clinical use. Key Features & Specifications Optical System & Image Quality Utilizes the UIS 2 (Universal Infinity System) optical system, delivering bright, high-contrast images with excellent field flatness. Equipped with Planned Achromat (PLCN) objectives offering superior sharpness and clarity across the field of view. Features integrated anti-fungal treatment on optics to preserve performance in high-humidity environments. Optical Components Eyepieces: Wide‑field binocular type (Field Number = 20), with a 30° inclination and interpupillary adjustment between 48‑75 mm. Objectives (typical standard set): Plan Achromats at 4×, 10×, 40×, and optionally 100× oil immersion (in some configurations). Scribd Condenser: Built‑in Abbe condenser with NA of 1.25 (with oil immersion) and aperture iris diaphragm for precise illumination control. Illumination & Stage Comes with a built‑in Köhler illuminator using a 6 V, 30 W halogen bulb. Stage: Rackless design with a double-slide holder, complete with ergonomic tactile grips for smooth X‑Y movement; stage travel approx. 76 mm × 50 mm. Ergonomics & Build Quality Featuring a rigid Y-frame, low-positioned coaxial coarse/fine focusing knobs, and pre‑focus upper limit to prevent contact with slides. Integrated hand grips make transport within labs easy and safe. Some models in the CX31 line include tilting binocular tubes, though CX31RBSF is typically fixed Dimensions & Operating Conditions Approx. 233 mm (W) × 411 mm (H) × 367.5 mm (D), weighing around 7.7–8 kg. Designed for indoor use at altitudes up to 2000 m, ambient temperature range 5 °C to 40 °C, with humidity restrictions depending on temperature. Godpfx Aexhfd Isbdoil

Condition: used, This listing is for the Smeg GW1160S Lab Glassware Washer The unit is in full working condition and is ready for immediate use Key Features & Capabilities Thermal Disinfection: Heats up to 95 °C to deliver bactericidal cleaning for lab-grade glassware Programmable Control: Microprocessor-based electronic control with 9 preset programs and ability to store 6 custom cycles RS232 Connectivity: Integrates with external printers or PCs for traceability and logging Thermodynamic Drying: Equipped with active thermodynamic drying and a steam condenser (Ecoslim) featuring cold-water injection Construction & Design Internal Chamber: Made from AISI 316L stainless steel; robust, chemical-resistant, and easy to sanitize Gisdpfjxhf Aqex Abdjl Exterior Finish: Panels constructed from AISI 304 stainless steel for durability and easy cleaning . Dual Wash Levels: Two independent rack levels on telescopic guides to accommodate varied glassware sizes Water & Chemical Handling Water Softener Built‑In: Includes a salt-sensing, auto-regenerating softener to prevent scale and enhance cleaning Dual Water Inlets: Compatible with both cold and demineralized water sources Detergent & Neutraliser Pumps: Comes standard with peristaltic pumps for alkaline powder detergent and acidic neutraliser; can optionally add more pumps Safety & Compliance Electronic Door Lock: Ensures the door remains securely locked during high-temp cycles Safety Thermostats & Alarms: Features multiple thermostats, interlocks, plus acoustic and visual alarms . Dimensions & Power External Footprint: Approximately 600 × 600 × 850 mm, suitable for standard 60 cm bench space Chamber Size: Internal dimensions ~ 525 × 490 × 570 mm (depth varies slightly by source) Power Supply: Standard: 3-phase 400 V, 50 Hz, max 7 kW .

Year of construction: 2025, condition: new, Introducing the Xiros Mikro—a compact, bench-top freeze dryer engineered for efficiency and versatility. With an 8 kg ice capacity, it can extract up to 4 kg of ice from your products within 24 hours, making it ideal for small to medium batches. Key Features: - Adaptable Tray System: Comes standard with five electrically heated shelves; expandable up to nine to accommodate varying batch sizes. This flexibility allows you to process different quantities efficiently. - Candy-Pop Feature: The new Candy-Pop feature enables you to freeze-dry candies with just the touch of a button, simplifying the process for confectionery applications. - Customizable Processing: Offers manual and automatic modes, allowing you to program up to 16 unique steps for tailored drying recipes. This customization ensures optimal results for various products. - Efficient Design: Low-profile construction facilitates easy loading, while the stainless steel interior ensures durability and hygiene. The design also contributes to market-leading energy efficiency. - Advanced Vacuum Technology: Compatible with scroll dry vacuum pumps, ensuring low maintenance and quiet operation. This feature enhances the overall user experience by reducing noise and upkeep. - High-Quality Construction: Built with premium components for reliability and longevity. The innovative shelf-stack design improves temperature control accuracy by 60%, eliminating the use of adhesives and reducing out-gassing. - User-Friendly Interface: Features a 5-inch color touchscreen for easy monitoring and control, with USB connectivity for data logging and software upgrades. This interface simplifies operation and allows for seamless updates. - Warranty: CE certified and includes a 2-year commercial-grade warranty for peace of mind. This certification ensures compliance with global standards, and the warranty reflects the manufacturer's confidence in the product's durability. What’s Included Giedpfxsxxx Ihj Abdel - Xiros Mikro Freeze Dryer - 5 tier shelf stack plus trays supplied as standard - Vacuum Hose - Clamps (set of 2) - Sealing Ring (set of 2) - Drain Hose (set of 2) - Quick Setup Card Features - Customizable Processing: With manual and automatic modes, program up to 16 unique steps to tailor your drying recipes to perfection. Store your customized settings at the touch of a button. - Efficient Design: The low-profile design facilitates easy loading, while the full stainless steel interior guarantees durability and hygiene. - Adaptable Tray System: Start with 5 electrically heated shelves and expand to a maximum of 9 shelves, providing flexibility for varying batch sizes. - Advanced Vacuum Technology: Recommended for use with a scroll dry vacuum pump, ensuring low maintenance and quiet operation. - High-Quality Construction: The full stainless steel interior and high-performance components ensure durability and hygiene, while the low-profile design makes loading a breeze. - Warranty: The Xiros Mikro is CE certified and comes with a 2-year commercial-grade warranty, providing peace of mind. - Market-Leading Ice Holding Capacity: Designed for larger batches or longer defrost intervals. - 24/7 Operation: Designed to run continuously around the clock. - Premium Components: High-quality and performance parts from leading suppliers, ensuring reliability. - High-Performance Vacuum Technology: Utilizes specialized vacuum technology fittings and connectors for maximum efficiency. - Ice Condenser Specifications: - Volume: 11 ...

Year of construction: 2025, condition: new, Introducing the Xiros Mikro—a compact, bench-top Freeze Dryer engineered for efficiency and versatility. With an 8 kg ice capacity, it can extract up to 4 kg of ice from your products within 24 hours, making it ideal for small to medium batches. Key Features: - Adaptable Tray System: Comes standard with five electrically heated shelves; expandable up to nine to accommodate varying batch sizes. This flexibility allows you to process different quantities efficiently. - Candy-Pop Feature: The new Candy-Pop feature enables you to freeze-dry candies with just the touch of a button, simplifying the process for confectionery applications. - Customizable Processing: Offers manual and automatic modes, allowing you to program up to 16 unique steps for tailored drying recipes. This customization ensures optimal results for various products. - Efficient Design: Low-profile construction facilitates easy loading, while the stainless steel interior ensures durability and hygiene. The design also contributes to market-leading energy efficiency. - Advanced Vacuum Technology: Compatible with scroll dry vacuum pumps, ensuring low maintenance and quiet operation. This feature enhances the overall user experience by reducing noise and upkeep. - High-Quality Construction: Built with premium components for reliability and longevity. The innovative shelf-stack design improves temperature control accuracy by 60%, eliminating the use of adhesives and reducing out-gassing. - User-Friendly Interface: Features a 5-inch color touchscreen for easy monitoring and control, with USB connectivity for data logging and software upgrades. This interface simplifies operation and allows for seamless updates. - Warranty: CE certified and includes a 2-year commercial-grade warranty for peace of mind. This certification ensures compliance with global standards, and the warranty reflects the manufacturer's confidence in the product's durability. What’s Included - Xiros Mikro Freeze Dryer - Scroll Vacuum Pump - 5 tier shelf stack plus trays supplied as standard - Vacuum Hose - Clamps (set of 2) - Sealing Ring (set of 2) - Drain Hose (set of 2) - Quick Setup Card Features - Customizable Processing: With manual and automatic modes, program up to 16 unique steps to tailor your drying recipes to perfection. Store your customized settings at the touch of a button. - Efficient Design: The low-profile design facilitates easy loading, while the full stainless steel interior guarantees durability and hygiene. - Adaptable Tray System: Start with 5 electrically heated shelves and expand to a maximum of 9 shelves, providing flexibility for varying batch sizes. - Advanced Vacuum Technology: Recommended for use with a scroll dry vacuum pump, ensuring low maintenance and quiet operation. - High-Quality Construction: The full stainless steel interior and high-performance components ensure durability and hygiene, while the low-profile design makes loading a breeze. - Warranty: The Xiros Mikro is CE certified and comes with a 2-year commercial-grade warranty, providing peace of mind. - Market-Leading Ice Holding Capacity: Designed for larger batches or longer defrost intervals. - 24/7 Operation: Designed to run continuously around the clock. Gijdpfx Absxxx I Ujdjl - Premium Components: High-quality and performance parts from leading suppliers, ensuring reliability. - High-Performance Vacuum Technology: Utilizes specialized vacuum technology fittings and connectors for maximum efficiency. - Ice Condenser Specific...

Year of construction: 2002, condition: used, This listing is for a WFI System with 2 Mueller Clean Steam Generators. The system was installed in 2002, is in working condition, and is ready for immediate use. ----- System Overview A complete Water For Injection (WFI) production, clean-steam generation, and storage system for pharmaceutical or biotech facilities. Produces ultra-high purity water and clean steam using dual Mueller steam generators, pressure columns, UV filtration, and automated control via a Pharma Tec panel. ----- Main Components Mueller Clean Steam Generators ×2 – dual units producing clean / pure steam for WFI and sterilization duties. Four Pressure Columns – separation, purification, and holding of steam / condensate under controlled pressure. Fristam Pumps – sanitary main supply pumps providing feedwater or circulation through the system. Hanovia UV Filters – ultraviolet sterilizing filters to remove microbiological contamination from feedwater or WFI stream. Pharma Tec Control Panel – automation and control system with PLC, level, temperature, pressure, and conductivity monitoring; full alarm & data-logging. ----- Key Features Dual redundancy via two clean steam generators allows maintenance or alternating load without shutdown. Four pressure columns improve separation, holding and stability of steam / condensate under varying pressure loads. UV filtration ensures microbiological safety in line with regulatory requirements. Sanitary pumps (Fristam) for clean design, ease of clean-in-place, and high hygiene. Automated control panel (Pharma Tec) providing precise monitoring, control, and regulatory compliance. ----- Specifications Manufacturer: Mueller, Fristam, Hanovia / Pharma Tec Year Installed: 2002 System Type: Clean Steam + WFI generation & storage Steam Generators: 2 × Mueller Clean Steam Generators Prize Pumps: Fristam sanitary feed / supply pumps Filtration: Hanovia UV sterilisation units on feed / WFI lines Giedpfexv Aaisx Abdsl Control: Pharma Tec PLC / automation panel with full instrumentation (pressure, temperature, level, conductivity) Operating Conditions: Designed for pharmaceutical WFI-grade water and clean steam (sterile / pyrogen-free)

Condition: used, This listing is for a Shell Lab SC05A-2 CO2 Series CO2 Incubator. The unit is in full working condition and is ready for immediate release. The Shell Lab SC05A-2 CO2 Incubator is expertly designed to meet the stringent requirements for sensitive tissue and cell culture applications. Here’s a concise look at its key features and specifications: Key Features: Fast CO2 Recovery: The infrared (IR) CO2 sensor swiftly restores CO2 levels after door openings, essential for maintaining pH stability in cell cultures. Exceptional Temperature Uniformity: With a unique air jacket design, it delivers outstanding temperature uniformity of ±0.25°C at 37°C, crucial for consistent incubation conditions. Humidity Control: Maintains humidity levels through evaporation, allowing for up to 95% relative humidity—perfect for sensitive cultures that require a moist environment. Advanced Contamination Control: Patented Copper-Caged HEPA Filter: Enhances air quality by trapping contaminants while utilizing copper's antimicrobial properties. Heated Door: Reduces potential condensation on the inner glass, maintaining temperature integrity. Heated Copper CO2 Inlet: Prevents moisture from entering the chamber, further safeguarding culture conditions. Durable & Easy to Clean: The stainless steel interior ensures longevity and simplifies maintenance, while the autoclavable shelving provides additional sanitation options. Data Logging Capabilities: Enables tracking of environmental conditions for compliance and research documentation. Technical Specifications: Model: SCO5A Part ID: SCO5A Exterior Dimensions: 27.5" W × 28.5" D × 37.8" H (699 mm × 724 mm × 960 mm) Interior Dimensions: 20.5" W × 19.8" D × 21.5" H (521 mm × 503 mm × 546 mm) Volume: 5.0 . (142 L) Shelf Dimensions: 19.1" W × 17.8" D (485 mm × 251 mm) Godexxygxspfx Abdeil Unit Weight: 200 lbs (91 kg) Interior Metal: 300 Series Stainless Steel Exterior Metal: Painted Cold Roll Steel Operating Temperature Range: Ambient +5°C to 60°C Temperature Uniformity (Midrange): ±0.25 °C Temperature Stability (Midrange): ±0.1 °C Controller Type: Digital Display Resolution: 0.1 °C Power Requirements: 110-120 VAC, 50/60 Hz, 6.0 Amps Safety Certifications: UL 61010-1, EN 61010-1, CSA 61010-1, CE

Year of construction: 2014, condition: used, This listing is for a Mueller PyroPure P4003 Pure Steam Condensing System. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. This Unit is fitted with a Allen Bradley Compact Logix PLC and Panel View plus 1000 HMI's- Product Overview: The Mueller P4003 is a high-capacity pure steam condensing system, part of the trusted PyroPure series. Designed for pharmaceutical manufacturing, this system produces pyrogen-free and endotoxin-free water-for-injection (WFI) by condensing pure steam. Built to meet or exceed U.S. Pharmacopoeia (USP) standards for WFI, as well as CE marked and FDA compliant with 3.1B material certification. It is a versatile solution for facilities requiring both pure steam and WFI quality distillate. Its robust design and advanced features ensure reliable operation, compliance, and minimal maintenance. Key Specifications: Model Number: P4003 Capacity: 100 gallons per hour or 379 litres per hour of WFI-quality distillate. Pure Steam Inlet: 807 pounds per hour or 366 kilograms per hour. Coolant Requirement: 978 gallons per hour or 3702 litres per hour. Pure Steam Output Compliance: Pyrogen-free and endotoxin-free, meeting USP WFI standards. Core Features High-Quality Output: Produces pyrogen-free steam and WFI-quality distillate, ideal for pharmaceutical-grade applications. Utilizes a tangential nozzle design for optimal impurity separation in the pure steam generator. Efficient Design: Fully drainable components eliminate contamination risks and ensure clean operation. Electro-polished 316/316L stainless steel with a maximum surface roughness of 20 Ra for all product contact areas. USP Class VI-certified elastomers for enhanced safety and regulatory compliance. Ease of Maintenance: Removable tube bundle in the condenser allows for easy cleaning and inspection of critical surfaces. Requires only 24 inches of clearance on all sides for service and maintenance. Minimal instrumentation with just one control loop simplifies operation and reduces potential downtime. Installation Flexibility: Can be integrated with a PyroPure pure steam generator for dual production of pure steam and WFI. Optional stand-alone design for remote installation at the point of use, adding versatility to your setup. Applications: Pharmaceutical Manufacturing: Sterile environments, autoclave processes, and critical cleaning procedures. Biotechnology: Providing WFI for sensitive biological processes. Gisdpjxv Agcefx Abdel Healthcare: Humidification and sterilization in clean rooms or hospital sterilization units.

Condition: used, System Overview A complete, cGMP-compliant Water for Injection (WFI) generation and storage system. Produces high-purity, endotoxin-free water for pharmaceutical and biotech applications via multiple-effect distillation. This item can be crated and shipped internationally. Please contact us for a quotation ----- Main Components - Finn-Aqua 200-S3 Distillation Unit – three-effect evaporator/condensers with falling-film design, pyrogen separation, and continuous blowdown. - 600 L WFI Storage Tank – 316L stainless steel, atmospheric vent filter, level and temperature sensors. - 600 L Jacketed Holding Tank – 316L stainless steel, insulated, steam/hot water jacket for temperature control. Godpfx Asxqq Dxobdeil - WFI Distribution Pump – sanitary centrifugal pump for loop circulation. - Utility Connections – plant steam (3–8 bar), cooling water, feed water, condensate return, and instrument air. - Instrumentation – pressure, temperature, conductivity, and level transmitters with safety and relief valves. - Control Panel – PLC-based automatic operation, alarm handling, data logging, and local/remote control. ----- Key Features - Multi-effect distillation for high purity and energy efficiency. - Degassing and three-stage separation for endotoxin removal. - Fully stainless, drainable, and sanitary construction. - Compact, skid-mounted design with integrated utilities. - Designed for validation and GMP compliance (USP/EP WFI quality).

Condition: used, This listing is for the KSA SQ1E Steam Quality Test Kit. The system is in excellent working condition and ready for immediate use. ----- System Overview The KSA SQ1E is a portable, air-cooled steam quality testing unit designed for performing Non-Condensable Gas (NCG), Dryness, and Superheat tests in compliance with EN 285 and HTM standards. It provides a complete, self-contained solution for validating clean and pure steam systems used in pharmaceutical, biotechnology, and healthcare facilities. Unlike traditional systems, the SQ1E uses a built-in electric fan condenser, removing the need for cooling water and allowing tests to be carried out anywhere with minimal setup. The compact and durable design makes it ideal for on-site steam testing, validation, and qualification work. ----- Main Components KSA SQ1E Steam Quality Test Unit – fully air-cooled condenser assembly with built-in burette and measuring cylinder for NCG and dryness testing. Dryness and Superheat Test Assembly – includes test expansion tube, pitot tubes, flask, and temperature probe connections. Integrated Burette and Measuring Cylinder – illuminated and fitted with push-button zeroing and pause functions for precise readings. Power Supply – 12 V DC operation for the condenser fan and internal electronics. Steam Connection Set – includes tri-clamp and hose fittings for connection to clean steam systems. Portable Case – compact and rugged housing with handle and workspace shelf for field testing. Operating Manual and Documentation – includes standard test procedures, setup guidance, and result templates. ----- Key Features Air-cooled condenser design eliminates the need for external cooling water. Performs all required steam quality tests: Non-Condensable Gases, Dryness, and Superheat. Built-in burette and measuring cylinder for accurate, repeatable measurement. Push-button zeroing, pause function, and backlit illumination for ease of use. Portable, plug-and-play design ideal for site validation and testing. Godpfx Abjxqqyyjdsil Complies fully with EN 285, HTM, and pharmaceutical clean steam standards. ----- Specifications Manufacturer: KSA (Keystone Scientific / KSA Pharma) Model: SQ1E Type: Steam Quality Test Kit Power Supply: 12 V DC Cooling Method: Air-cooled, fan-assisted condenser Functions: NCG, Dryness, Superheat testing Operation: Manual/portable Compliance: EN 285, HTM, AAMI, PDA guidelines Construction: Stainless steel and aluminium components in rugged portable case