Used Consumption Goods for sale (24,621)

Year of construction: 1982, condition: good (used), pre-cutting saw Esterer KSG-F year 1982 travelling with swords with control Hnodsip T Dlspfx Ag Nou with length measuring with frame with hydraulics immediately available Location: Austria, near Vienna

Condition: used, Year of construction: 1996, Technical details: length: 4000 mm width: 800 mm height over floor: 400 mm Payload: 3,0 t dimensions L x W x H: 4,1 x 0,8 x 0,41 m weight: 0,153 t Several of these "long material trailers" are for sale in Leipzig. Hjdpfx Ageu Nv Sys Njnu The trailers can be coupled together. The drawbar/trolley jack is charged separately, if required. Single axle operation with rigid axle. Solid rubber tires, track spacing = 590mm Sale individually but also in a package from 5 pieces possible. Price on request. i.D. *

Condition: used, Year of construction: 2014, Technical details: Hnodju Nv Tqepfx Ag Nou length: 8.000 mm width: 1.600 mm height over floor: 980 mm Payload: 40 t axle distance: 980 track width: 550 mm weight: 9,5 t dimensions L x W x H: 13,3 x 2,5 x 2,65 m - Application for tractors - with corner supports - Trailer drawbar: length 1,300 mm; support height 1,400 mm; crank 600 mm; fastening with adjustment bolt Ø 72 x 90 mm - with solid rubber tires (2x double wheel rocker with 4 wheels) - technically possible driving speed 6 km/h i.D. *

Condition: used, Technical details: Hnsdpfsu U Hk Ujx Ag Nsu length: 4000 mm width: 2000 mm height over floor: 510 mm Payload: 10,0 t axle distance: 3000 track width: 1500 mm weight: 1,0 t dimensions L x W x H: gesamt: 4,8 x 2,0 x 0,51 m Welded steel construction Wooden bolster support 4x double wheel - solid rubber Steering on both sides with tow bar on both wheel pairs tow bar/coupling rod length 1900 mm, pin eye Ø 40 mm, handle 2x rear/front coupling eye Ø 32 mm, coupling pin 1x Ø 32 mm *

Condition: used, functionality: fully functional, load capacity: 8,000 kg, lifting height: 3,150 mm, free lift: 1,650 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,650 mm, DGUV certified until: 12/2025, fork carriage width: 150 mm, fork length: 2,000 mm, fork width: 150 mm, tire condition: 98 %, front tire type: superelastic tires (non-marking), rear tire type: superelastic tires (non-marking), overall weight: 9,750 kg, total height: 2,650 mm, total length: 3,560 mm, total width: 2,010 mm, color: original, Goodsense FD 70 Used Forklift / New Diesel Forklift Welcome to the Goodsense G-Series 8-ton diesel forklift – a benchmark in power, reliability, and efficiency. With a powerful engine that effortlessly handles heavy loads, minimal vibration, and easy maintenance, our Goodsense FD 70 used forklift is the ultimate solution for demanding industrial tasks. Technical specifications and equipment: Type: Goodsense FD 70 Load capacity: 8000 kg Hnjdpswakivsfx Ag Nou Load center: 600 mm Forks: 2000 mm Drive: Diesel Duplex mast Lift height: 3150 mm Overall height: 2650 mm Free lift: 1650 mm 3rd and 4th control circuits Sideshift and fork adjustment Forks: 2000 mm, 150 x 60 mm Windshield and roof section Tires: SE non-marking CE certificate Interior mirror Overall width: 2010 mm Mast retracted height: 2500 mm Turning radius: 3350 mm Minimum aisle width for 90° turn: 3040 mm Length: 3560 mm Terrain weight: 9750 kg Features: The Goodsense G-Series 8-ton diesel forklift is a powerhouse, powered by a premium engine that's among the most powerful in its class. This impressive machine effortlessly handles heavy loads without sacrificing speed, making it one of the most efficient solutions in the industry. The advanced direct-injection diesel engine not only delivers exceptional power but also minimizes unwanted vibrations thanks to innovative damping materials integrated between the chassis and engine. This ensures not only smooth performance but also remarkably quiet operation. Reliability is at the heart of this forklift's design, with components that are resistant to damage and wear. This robust construction helps keep repair and maintenance costs to a minimum while maximizing operational efficiency. The Goodsense G-Series 8-ton diesel forklift is not only powerful but also easy to maintain. Quick and easy access to all components allows for hassle-free inspection and maintenance. This, in turn, saves time and money, while keeping the machine in optimal working condition, ready for any daily workload. Would you like to learn more about instruction and training for operators of industrial trucks and warehouse equipment? Visit our information page!

Condition: used, functionality: fully functional, machine/vehicle number: 214012327, Year of construction: 2014, operating hours: 5,140 h, load capacity: 2,500 kg, lifting height: 3,700 mm, load center: 500 mm, fuel type: gas, mast type: duplex, motor manufacturer: NISSAN, motor model: K25, gearing type: automatic, fork length: 1,100 mm, fork width: 120 mm, fork thickness: 50 mm, turning radius (inner): 2,245 mm, tire condition: 70 %, front tire size: 7,00-12, rear tire size: 6.00-9, empty load weight: 3,770 kg, total width: 1,150 mm, Equipment: pallet forks, sideshift, The machine is equipped with a petrol-gas fuel system, fork positioner and side shift, semi-cabin, and we offer a hydraulically tipping 2m³ bucket as part of the set. Can be purchased separately. Hnodpjwtxz Tjfx Ag Neu

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 135 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 16 mm, counter spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 16, The machine is offered with an Iemca Elite 112/32 bar feeder! TECHNICAL DETAILS Machining Main spindle max. bar diameter: 16 mm Max. machining length without re-gripping: 135 mm Main spindle max. drilling diameter: 6 mm Main spindle max. thread diameter: M6 Sub spindle max. bar diameter: 16 mm Sub spindle max. drilling diameter: 5 mm Sub spindle max. thread diameter: M3 Hjdpfjxlffysx Ag Nonu Spindles Main spindle speed: 200–8,000 rpm Sub spindle speed: 200–6,000 rpm Main spindle C-axis indexing: 1° Rapid traverse Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tools Driven tool speed: 200–4,500 rpm Max. number of tool stations: 16 Tool holder: 10 × 10 mm MACHINE DETAILS Drive capacity Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical connection Operating voltage: 200 V Frequency: 50 Hz Phases: 3 Main transformer input voltage: 400 V Main transformer output voltage: 200 V Connected load: 5.2 kVA Pneumatic connection Compressed air connection: min. 5 bar Compressed air consumption: 44 NL/min Machine data Dimensions: 1,590 × 837 × 1,761 mm Spindle height (floor to spindle center): approx. 1,000 mm Machine weight: 1,150 kg Control Control type: CNC path control Fanuc 0i-TD Smallest input increment: 0.001 mm Smallest output increment: 0.001 mm (Z) / 0.0005 mm (X) Input modes: incremental and absolute Interface: RS232 Spindle synchronization: main and sub spindle EQUIPMENT Work area lighting Ejection and unloading device Coolant tank and central lubrication Door interlock Parts catcher and workpiece container 5 turning tool holders 10 × 10 mm Coolant system with movable jet arms Power clamping system for main and pick-off spindle

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 1,990 h, laser power: 12,000 W, sheet thickness steel (max.): 30 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 100 mm, Bystronic ByStar Fiber 3015 Dynamic Edition F12000 from year of manufacture 2023 with only 1,990 cutting hours! Original machine price was approximately GBP 767,000! TECHNICAL DETAILS Travel X-axis travel: 3,100 mm Y-axis travel: 1,580 mm Z-axis travel: 100 mm Hnodpfx Aexlcz Ejg Neu Maximum Sheet Thickness (Cutting) Steel: 30 mm Stainless steel: 30 mm Aluminium: 30 mm Brass: 15 mm Copper: 12 mm Positioning Speed Maximum positioning speed (X/Y parallel): 120 m/min Maximum simultaneous positioning speed: 170 m/min Positioning Accuracy Bilateral axis repeatability (R): 0.025 mm Mean bilateral axis positioning deviation (M): 0.05 mm Edge detection accuracy: ±0.5 mm Workpiece Weight Maximum workpiece weight: 1,100 kg Maximum workpiece weight on both shuttle tables: 1,850 kg Table Change Time Shuttle table changeover time: 25 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,150 x 6,000 x 3,200 mm Machine weight: 11,000 kg Laser Source Laser source: Fiber 12000 Power: 12,000 W Adjustable range: 1,200–12,000 W Wavelength: Fiber Consumption Total power consumption (incl. exhaust, cooler): 27 kW Operating Hours Cutting hours: 1,990 h Power-on hours: 13,428 h EQUIPMENT Detection Eye BeamShaper NCT & KerfScan 2nd high-pressure cutting gas channel Prepared for N2 generator Internal dust extraction system Electrical cabinet position: top (mezzanine structure not included) Note: The machine has already been dismantled, is in storage, and is no longer connected to power.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100001570, travel distance Z-axis: 180 mm, table width: 1,620 mm, table length: 5,510 mm, rapid traverse X-axis: 56 m/min, rapid traverse Y-axis: 56 m/min, TECHNICAL DETAILS Processing table dimensions (L x W): 5,510 x 1,620 mm Z-axis travel distance: 180 mm Maximum vectorial rapid traverse speed X/Y-axis: 56 m/min Spindle unit speed: 4,000 rpm Tool changer slots: 44 Connection diameter: 250 mm MACHINE DETAILS Dimensions & Weight Dimensions: 9,700 x 5,020 x 2,650 mm (LxWxH) Net weight: 5,000 kg Spindle unit motor power: 5.5 kW Air consumption: 4,430 m³/h Air velocity: 25 m/s Voltage: 400 V / 50 Hz EQUIPMENT PRO-Speed safety system TEPCAD control panel with touchscreen color display Linear tool changer TBR14 Linear tool changer FAST14 Air blower on the electrospindle XY-axis safety guard Vacuum pump 150/300 m³/h 5-axis unit ‘JQX’ version 13.5 kW Fixed pedestal: 145 x 145 H=75 mm Rotatable gondola: 145 x 55 H=75 mm Clamp for 8 rails TV FLEX / TV FLEXDRIVE / TV FLEXMATIC MULTIGRIP 90 round clamp (H83) for TV FLEX / TV FLEXMATIC Maestro connect 1 year (including Gateway Kit plug & play) SCM DIGITAL SOLUTIONS: MAESTRO CONNECT MAESTRO ACTIVE software for human-machine interface (HMI) Maestro software for CNC programming Hardware key for Maestro CNC Hnedpfx Agjxmgr Rs Nou Advanced Maestro 3D module Additional key for Maestro CNC (USB connection) Windows 10 embedded 64-bit operating system Console with integrated PC eye-M PRO

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning length: 900 mm, turning diameter: 300 mm, spindle bore: 86 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 270 mm, controller model: FANUC 31i-B, TECHNICAL DETAILS Swing diameter over bed: 780 mm Swing diameter over slide: 700 mm Maximum turning diameter: 300 mm Maximum turning length: 900 mm Bar capacity: 76 mm Spindle Chuck size (main/sub-spindle): Ø254 mm Spindle bore (main/sub-spindle): Ø86 mm Spindle speed: 4,000 rpm Spindle motor (max./continuous): 26 / 15 kW Spindle drive: integrated motor Spindle flange: A2–8 C-axis indexing: 0.001° Travel axes X1/X2 axis: 270 / 190 mm Z1/Z2 axis: 920 mm Y axis: ±120 mm Rapid traverses Rapid traverse speed X/Y/Z axes: 24 / 24 / 24 m/min Rapid traverse speed ZB axis: 12 m/min Guideway system: Box Guide Turret Tool stations: 2 × 12 External tool size: Ø25 mm Internal tool size: Ø40 mm Indexing time: 0.2 s/step Turret system: Wedge type Driven tools Motor power (max./continuous): 5.5 / 2.2 kW Tool speed: 4,000 rpm Collet size: Ø20 ER32 Tool type: BMT65 MACHINE DETAILS Control: FANUC 31i-B Tank and supply system Coolant tank: 230 l Lubrication tank: 8 l Electrical data Power consumption: 69 kVA Line voltage: 220 / 400 V Dimensions & weight Dimensions (L × W x H): 3,670 × 2,170 x 2,601 mm Weight: 11,000 kg Hodpfoxltbcex Ag Nenu EQUIPMENT LNS bar feeder

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3 h, functionality: fully functional, pressing force: 20 t, working width: 1,250 mm, travel distance Y-axis: 1,270 mm, sheet thickness (max.): 6 mm, working length: 1,250 mm, No minimum price – guaranteed sale to the highest bidder! Machine from a training workshop with only 3 hours of punching time! Submission of a bid obligates timely collection by 21/11/2025! TECHNICAL DETAILS Pressing force: 200 kN Maximum sheet thickness: 6 mm Turret stations: 51 Auto-index stations: 4 Y-axis travel: 1,270 mm Working area: 1,250 x 1,250 mm Hnedjxn Rviepfx Ag Neu MACHINE DETAILS Control system: AMNC-F Weight: 12,500 kg Electrical data Full load current: 55 A Short-circuit current: 25 kA Power consumption: 19 kVA Nominal voltage: 200 V Frequency: 50 Hz Operating hours Punching time: 3 h Power-on time: 895 h EQUIPMENT Solution Pack Blank School offline software AP100 2D CAD Production Designer 3D VPSS3i Blank Tooling package valued at EUR 8,000

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 33,749 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 1,700 kg, TECHNICAL DETAILS X-axis: 4,000 mm Y-axis: 2,000 mm Z-axis: 115 mm Maximum workpiece weight: 1,700 kg Maximum speed: 140 m/min Controller: CNC Sinumerik 840D SL Positioning accuracy Positioning deviation Pa: 0.1 mm Average positioning accuracy Ps: 0.03 mm Laser data Maximum laser power: 4,000 W Wavelength: 10.6 µm Sheet thickness mild steel: 25 mm Sheet thickness stainless steel: 15 mm Sheet thickness aluminium: 10 mm MACHINE DETAILS Length: 12,000 mm Width: 5,300 mm Hnjdpexl T Rdofx Ag Nou Height: 2,200 mm Weight: 14,000 kg Total system power consumption: 11–65 kW Beam-on time: 19,152 h (28.08.2025) Laser-on time: 33,749 h (28.08.2025) EQUIPMENT - Automatic longitudinal pallet changer - Longitudinal chip conveyor - Oil vaporizer unit - PierceLine - FocusLine - NitroLine - PlasmaLine - TruFlow 4000 CO2 laser with optimized standby mode - Maintenance-free radial turbine - High-frequency excitation - TASC laser control - Laser power control - Laser logbook - LensLine with status monitoring - Cutting head with 250 mm focal length - Quick-change cutting head unit (UTI) - ControlLine - Lens with RFID chip - ContourLine - Micro-welding - FastLine - AdjustLine - Internet remote services - FlyLine - Simple workshop programming

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 723-F07, TECHNICAL DETAILS Maximum device output: up to 24,000 bottles/hour (depending on model) Operating pressure: Standard 4.5 bar ±10 % Noise level: Between 75 and 85 dB(A) ±2 dB according to DIN EN ISO 11204 Container height tolerance Hodpoxl Evrofx Ag Njnu Glass containers: ±2.5 mm PET containers: ±2.5 to ±6 mm MACHINE DETAILS Overall dimensions: 3,000 x 2,000 x 2,310 mm Weight: 2,041.2 kg Voltage: 230/400 V Frequency: 50 Hz Phases: 3 Current: 10 A Power consumption: up to 8.5 kVA (depending on model) Operating conditions Operating temperature range: +5 °C to +50 °C Operating pressure (production): min. 5 bar, max. 10 bar EQUIPMENT The machine can be operated in synchronization with other devices or independently. Suitable for glass and PET containers with flexible tolerance requirements.

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM Hnedpfx Ageh U Nvke Nju WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, Year of construction: 1996, MAZAK SUPER QUICK TURN 10 MS CNC LATHE MAKE MAZAK, MADE IN JAPAN MODEL SUPER QUICK TURM 10 MS YEAR 1996 CONTROL MAZATROL T PLUS MAX SWING 435mm SWING OVER CARRIAGE 370mm MAX. MACHINING DIA 230mm MAX. BAR WORK DIA 42mm MAX DISTANCE BETWEEN SPINDLES 705mm SPINDLE MOTOR AC11kw (15HP) Hnsdpfxexnpp Is Ag Nju SPINDLE SPEED 6000rpm 2ND SPINDLE MOTOR AC5.5kw (7.5HP) 2ND SPINDLE SPEED 6000 rpm ROTARY TOOL MOTOR AC2.2kw (3HP) ROTARY TOOL SPEED 3000 rpm TURRET TOOL CAPACITY 12 TOOLS STATIONS RAPID TRAVERSE RATE X,Z:30m/min (1180IPM),C: 400rpm MACHINE DIMENSION L x W x H, 2705mm x 1465mm x 1835mm MACHINE WEIGHT 3850kg PLUS C-AXIS SUB SPINDLE DRIVEN TOOLS (3 NO.S) PARTS CATCHER SWARF CONVEYOR TOOL SETTING PROBE COLLET CHUCK BUILT IN TRANSFORMER FULL SET OF MANUALS GOOD WORKING ORDER

Condition: excellent (used), Year of construction: 2010, operating hours: 120 h, functionality: fully functional, power: 1,064 kW (1,446.64 HP), fuel type: gas, output frequency: 50 Hz, Jenbacher J320 GS CHP unit price includes dismantling and loading onto your trucks. Year: 2010 Power: 1064 KW Hsdpfx Agswd Nw Te Njnu Frequency: 50hz Running hours: 120k (overhaul at 100k) reports available. Currently running Full tech data sheet available. Set in very good condition. Serviced and maintained by engineers. Contact for more info and pictures.

Condition: used, Year of construction: 2008, The Tetra Pak Hartness accumulator is used in packaging processes, primarily in the food and beverage industry. Its main purpose is to manage the flow of products on production lines. Here are some key functions: Hjdew Nw Hropfx Ag Nsnu - Buffering: It acts as a buffering system that helps to manage temporary fluctuations in production speed. This is essential for maintaining a smooth and efficient operation when different machines on the line operate at varying speeds. - Increased Efficiency: By accumulating products, it allows production lines to operate more effectively, reducing downtime and improving overall efficiency. - Enhanced Workflow: The system ensures that there is a constant flow of products to downstream processes, preventing bottlenecks and maintaining an uninterrupted workflow. - Flexibility: It provides flexibility in production scheduling, allowing manufacturers to adapt to changes in demand without disrupting the entire production line. Previously Used on: 1000 ml Edge Condition: Very Good Available: Immediately Controls: Allen Bradley Version: DS 300 Working Hours: 46462 Year of Manufacture: 2008

Condition: excellent (used), Year of construction: 2016, XYZ 1550VS Gap Bed Centre Lathe EX Training College Machine 3 Jaw Chuck 2-axis Digital Readout Toolpost & Chuck Guard Footbrake (Modern Triumph 2000 size machine Manufactured & Installed 2016 Machine Capacity: Swing Over Bed 390mm Swing in Gap 610mm Swing Over Cross Slide 150mm Distance Between Centres 1250mm Cross Slide Travel 230mm Spindle: Spindle Speeds 20 – 2500rpm Spindle Power 5.75kW Spindle Bore 54mm Spindle Nose D1-6 For sale with Jet Machinery Ltd Jet Machinery Stock No: #79010 Machine Serial Number: 7715 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Hnsdpfxsxn Sf Ss Ag Nsu

Condition: good (used), Year of construction: 2011, machine/vehicle number: A05B-2551-B280, Fanuc LR mate in very good condition. It was removed from an injection moulding process where it loaded the the plastic blanks prior to forming and was only in production for 5 yrs. it comes with the robust R30iA controller which has ethernet connectivity to connect to your PLC or can be configured to work as a stand alone unit Hjdpfxjtiy Sgo Ag Nonu

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes Hnedpfx Agjh U Rzge Nou NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: ready for operation (used), functionality: fully functional, A good used automatic labelling system featuring twin belt drive with speed control - system was used for automatic labelling of the underside of boxes/cartons on a production line - barcode scanner is integrated to detect the presence of the label (which contained a barcode) and if no label detected the system alarms and stops - barcode scanning can be disabled if not required Hnedpjwufb Asfx Ag Nsu Single phase 240Volt AC supply Ready to ship worldwide

Condition: used, The Benhil 8304 butter packing machine is a specialized piece of equipment designed for the efficient packaging of butter and similar products. Here are some key features and details that are commonly associated with this type of machine: - Automated Operation: The machine typically offers automated processes, reducing the need for manual labor and increasing throughput. - High Accuracy: It is built for precise filling and packaging, ensuring consistency in portion sizes. - Versatile Packaging Options: The Benhil 8304 can often handle various packaging formats, which may include blocks, tubs, or pouches, catering to different market needs. - Easy to Use: Designed with user-friendly interfaces, these machines usually offer easy operation and minimal training requirements for staff. - Hygienic Design: Being in food packaging, the machine generally adheres to high hygienic standards, making it suitable for dairy products. - Efficiency: It is typically engineered to operate at high speeds, allowing for large quantities to be packaged in a short period. Hnsdpfx Ajw Tbz Ijg Neu - Durability: Constructed using robust materials, the machine is designed to withstand the demands of a production environment, promising longevity. Format: 25 x 41 Product infeed : Hopper Dossing range: 6-20gr Capacity: 120 pieces per Hour Product capacity: 150 kg per hour Stations: Paper forming > Filling > Wrapping > Conveyor > Case Packing Paper Centering Unit: Photo cell Mark Detection Condition: Good Formats we can build ( Optional) : Round Medallion/ Rectangle

Condition: excellent (used), Year of construction: 2014, XYZ 1020 Vertical Machining Centre Siemens 828D Control Manufactured & Installed in 2012 24 Station Too Carousel 8k Spindle Machine Capacity: Table Size: 1120 x 500 X Axis Travel 1020mm Y Axis Travel 520mm Z Axis Travel 540mm Rapid Traverses 20,000m/min Spindle: Spindle Speeds – 8,000ppm Tool Shank ISO40 Tool Storage Capacity 24 Tools Spindle Power 20Hp Hedpsxndrdsfx Ag Nenu For sale with Jet Machinery Ltd Machine Serial Number: SMU00143 Cost: £27,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.  

Condition: good (used), Year of construction: 2012, functionality: fully functional, load capacity: 165 kg, controller model: 30iA, teach pendant manufacturer: Fanuc, input voltage: 400 V, type of input current: three-phase, Used but good condition. Repeatability test done, greased, mechanical and RAM batteries changed. We have cleaned it up but it did come from a spotweld environment so has obvious signs of use. Hnjdpfxeuqa Tij Ag Neu

Condition: used, The Alfa Laval Bactofuge 618 is a specific model of separator designed predominantly for the food and beverage industry, particularly for the dairy sector. Here’s an overview of its key features and applications: Key Features - Centrifugal Separation: Utilizes high centrifugal forces to separate bacteria and particles from liquids, which significantly improves the quality and shelf life of products. - High Efficiency: Known for its efficient separation capabilities, effectively removing unwanted microorganisms and solids from liquids. - Hygienic Design: Built with food safety in mind, featuring materials and designs that comply with industry hygiene standards to minimize contamination risks. - Compact Size: Designed to fit into smaller spaces within processing plants, making it suitable for various production environments. - Automated Control: Many models feature advanced automation options for monitoring and controlling the separation process, optimizing performance and ease of use. Applications - Dairy Industry: Mainly used in the processing of milk and whey, the Bactofuge helps in improving the microbial quality of products, ensuring longer shelf life and safety. - Beverages: Can also be utilized in the clarification and purification of fruit juices and other beverages, helping to remove sediment and enhance clarity. - Biotechnology and Pharmaceuticals: It may find applications in the removal of cell debris or particulates from culture broths in Biotech and Pharma industries. Maintenance Hedpfxjxnbrho Ag Nonu - Service Support: Alfa Laval usually provides good after-sales support, including maintenance schedules, spare parts availability, and service contracts. - User Training: Training for operators is generally recommended to ensure proper handling and maintenance of the equipment Capacity: 25,000 L/H Usage: Bacteria Removal Centrifuge Tools: Included Control panel: Included Valves: Included Available: Immediately Condition: Good Machine Top Part No.: 545525-04 Inlet and Outlet No.: 546664-01 Separator Bowl No.: 546823-01 Machine Bottom Part No.: 546215-04