Used Control Cabinet for sale (48,220)

Year of construction: 2024, condition: used, Year of manufacture: 2024 New: Yes Empty weight: 35 kg Dimensions of cargo space: 51 x 20 x 85 cm Serial number: 9305082 Please contact Team DPX for more information New cabinet with DSE6120 panel and CHINT NM1LE-125S breaker 40A. Completely wired 2 units available Fgsdeyaf Sqspfx Aanji

Condition: used, Radial fan, fan, blower, control cabinet fan Control cabinet fan, radial module with support spider EBM PAPST Type K3G450-AZ30-61 Year of manufacture: 2015 Motor: M3G150-IF Design: Radial Air flow rate: max. 8040 m³/h Pressure increase: 1492 Pa Fan: Ø 450 mm Number of blades: 7 Power connection: 3~ 380-480 VAC 50 / 60 Hz Nominal speed: 2750 rpm Power: 5370 Watts at 400 VAC Rated current: 8.3 A at 400 VAC Efficiency: 64.9 % Efficiency grade N: 67.7 External mounting frame: 550 x 550 mm Operating mode: Continuous operation (S1) Bearings: Maintenance-free ball bearings Protection class: IP55 Fgodpfx Ae Agw Ensansi Insulation class: F Compliance with standards: EN 61800-5-1; CE Approvals: CSA C22.2 No. 77 + CAN/CSA-E60730-1; UL 1004-7 + 60730-1; EAC Technical features: - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor 0-10 V or 4-20 mA - External 24 V input (parameterization) - External enable input - Fault alarm relay - Integrated PID controller - Motor current limitation - PFC, passive - RS485 MODBUS-RTU - Soft start - EEPROM write cycles max. 100,000 - Control input 0-10 VDC / PWM - Control interface with safety-isolated SELV potential - Over-temperature protection, electronics / motor - Under-voltage / phase failure detection Dimensions W x H x D: 550 x 550 x 480 mm Weight: 54 kg Very good condition - from a test setup

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Panel, Sub-Distribution Board, Control Cabinet, Distribution Box, Floor Distribution Cabinet Dimensions: 200x60x22.5 cm including distribution base Cabinet height without base: 190 cm + 10 cm base = total height Industrial quality, housing made from sheet steel, color RAL 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distributors were in use until recently and had annual inspections. A wiring diagram is included. A total of 10 units available. Year of manufacture: 2003 For further data, please refer to the images. Very good condition – almost like new, see pictures. Collection only by appointment in 75053 Gondelsheim. Fjdpfx Aajynwxxenogi Forklift available for loading Shipping by freight carrier possible, please inquire with your postal code.

Condition: used, 3D MICROMAC Type: microCUT laser marking system microCUT Enclosure IPG laser source Raylase 3-axis scanning system Power measurement head 1 Power measurement head 2 Camera system for positioning Camera system for quality inspection Cooler Extraction system Control cabinet with IPCs Coolant distributor Machine dimensions: Machine weight: 2 tons Width 922 mm, Depth 4653 mm, Height 2925 mm Components: Extraction system: Height 2869 mm, Width 760 mm, Depth 1577 mm Cooler: Height 1697 mm, Width 1440 mm, Depth 860 mm Weight (without filling) 500 kg Laser rack: Height 1786 mm, Width 856 mm, Depth 806 mm Weight 500 kg Control cabinet: Height 2001 mm, Width 1616.05 mm, Depth 605 mm Machine connections: Electrical: Mains voltage 3*400 VAC/N/PE Mains current consumption 74A Frequency 50/60Hz Power consumption 51.3kW Control voltage 24/5VDC Main fuse NH 100A gG Modules: Laser source: Mains voltage 400 VAC Frequency 50/60Hz, Power 16.7 kW, Current consumption 59A Cooler: Mains voltage 400V, Frequency 50/60Hz, Current consumption 40A Machine: Consumable media Working pressure 6-10 bar Temperature 10-50°C Quality ISO 8573-1 Solid particles: Class 1 Oil: Class 1 Water: Class 4 Residual oil content < 10µg/m³ Water content < 6 g/m³ Pressure dew point 3 °C Consumption < 120 l/min Cooling water cooling unit module: Cooling water outlet temperature 21°C Cooling water return temperature 26°C Setpoint tolerance 1K Cooling water flow rate 69 l/min Free pump pressure 1.5 bar DI water cooling unit Cooling water outlet temperature 26°C Cooling water return temperature 31°C Setpoint tolerance 1K Cooling water flow rate 10 l/min Free pump pressure 1.5 bar Laser source manufacturer IPG Type: YLS-5000 Mode Continuous, Quasi-continuous Wavelength 1070nm Power 5kW Frequency 5 kHZ Scanner manufacturer Raylase AG Type: Axialscan-30-Y Field size 1000x1000 mm Spot diameter 87 1/e²(µm) Resolution < 31 µm Working distance 1198 mm Cooling unit: Manufacturer Riedel Type: PC 250.01-NZ-DI-S Refrigerant R407C 50 Hz Net cooling capacity 38 kW 60Hz Net cooling capacity 40.3 kW Fgedpfx Aaozdqp Ienei Camera system: Manufacturer e2V Type: AVIIVA TM UM2 GE Quality cameras: Manufacturer e2v type: DiViiNA LM1 CL Extraction system: Manufacturer Donaldson Filtration Type: DOWNFLO Oval 3-3 Max. Fan speed 3000 rpm Working pressure: 4.2 bar Pulse duration 100ms Volume of the pressure vessel 92 l Type: microCUT laser marking system Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: new, Year of construction: 2018, functionality: fully functional, overall weight: 91 kg, total length: 45 mm, total width: 60 mm, total height: 160 mm, type of input current: three-phase, 🔧 Device Description Professional cooling unit for control cabinets, designed for industrial applications. The unit provides stable operating conditions for electronics and automation systems, protecting them from overheating. The TopTherm series model is characterized by high cooling performance and reliability during continuous operation. ⚙️ Technical Data Power supply: 400 V / 50 Hz (3~) / 460 V / 60 Hz Fgodpoyw Ndgefx Aanoi Cooling capacity (L35 L35): 400 V: approx. 3.95 kW 460 V: approx. 4.35 kW Sensible cooling capacity: up to 3.58 kW Power consumption: up to 2.0 kW Rated current: 4.2 A / 4.6 A Refrigerant: R134a (2995 g) Operating temperature range: 10°C – 55°C Degree of protection: IP54 (internal) / IP34 (external) Weight: approx. 91 kg 📦 Delivery Pallet shipping available Personal collection also possible We assist in organizing international transport

Condition: used, REGATRON Programmable DC power supply / Industrial power supply unit REGATRON TopCon Quadro 3 × 32 kW – total 96 kW rated power – 0–400 V DC – 0–100 A per unit For sale is a used industrial DC power supply system with three programmable REGATRON TopCon Quadro DC power supply units in an industrial control cabinet. The system is suitable for industrial testing and measurement applications, development, research, and the supply of electrical loads. Technical data: Manufacturer of power supply units: REGATRON AG Series: TopCon Quadro Type: TC.P.32.400.400.S.HMI Unit type: Programmable DC power supply Number of power supply units: 3 Year of manufacture of control cabinet system: 2016 (according to nameplate) Electrical data per power supply unit: Rated power: 32 kW DC output voltage: 0–400 V DC output current: 0–100 A Mains connection: 3 × 400 V AC Mains frequency: 48–62 Hz Input current according to nameplate: 3 × 60 A Total equipment: 3 × REGATRON TopCon Quadro power supply units Installed rated power: 3 × 32 kW = 96 kW The actual available total power and output configuration depend on the existing wiring and parameterization. A combined 96 kW output configuration has not been verified. Control and regulation: Programmable output voltage Programmable output current Power regulation Constant voltage operation (CV) Constant current operation (CC) Constant power operation (CP) HMI control panels with LCD displays Rotary and control buttons RS232 interface according to data sheet Status and error indicators Equipment: Industrial control cabinet 3 × REGATRON TopCon Quadro DC power supply units Main switch Electrical protection and switching elements Internal wiring and connection components Fan cooling RITTAL power socket strip KEMET components in the control cabinet Lifting points / transport eyes Other installed components as shown in the pictures Application areas: Fjdj Ad Ia Ijpfx Aanogi Industrial test benches Electrical load and supply tests Research and development Power electronics Laboratory and test systems Industrial DC power supply Scope of supply: 1 × Industrial control cabinet with 3 × REGATRON TopCon Quadro TC.P.32.400.400.S.HMI Integrated electrical installation and accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Signs of wear and tear are present Dimensions and weight: Per REGATRON power supply unit (H × W × D): 400 × 483 × 525 mm (housing, without connections) Weight per power supply unit: approx. 64 kg according to data sheet Weight of the three power supply units together: approx. 192 kg External dimensions of the entire control cabinet: not determined Total weight of the system including the control cabinet: not determined Collection or shipping by forwarding agent possible after consultation. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: good (used), Year of construction: 2020, Control cabinet cooling unit, control cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling unit, control cabinet cooler -Manufacturer: Rittal, wall-mounted cooling unit Blue e -Type: SK 3187930 -Cooling capacity: 2.6 kW -Number: 2x cooling unit available -Price: per piece Fodpfx Aex Nfktoanegi -Dimensions: 450/250/H1600 mm -Weight: 56 kg/pc.

Condition: like new (used), Year of construction: 2023, overall weight: 100 kg, total length: 1,200 mm, total height: 1,800 mm, total width: 600 mm, Control cabinet, switchgear panel, expansion control cabinet, server cabinet, system cabinet, expansion system. Brand: Rittal Fgjdpfx Aaozfhggsnei Model: VX25 / VX 8286.000 Two-door cabinet Cabinet dimensions: 1200 x 600 x H-1800 Weight: 100 kg Cabinet is like new / never used.

Condition: like new (used), Year of construction: 2024, overall weight: 140 kg, total length: 1,200 mm, total height: 2,000 mm, total width: 600 mm, Control cabinet, switchgear cabinet, expansion cabinet, server cabinet, system cabinet, expansion system. Brand: Rittal Fgedpfozfhh Rsx Aanji Model: VX25 / VX Y352.222 Rittal two-door cabinet with integrated lighting cabinet dimensions: 1200 x 600 x h-2000 weight - 140 kg Cabinet is like new / never used.

Condition: good (used), Electrical control cabinet with Siemens S 5 controller. Complete with contactors, fuses, etc. Fgjdpe Agnncjfx Aanei

Condition: used, Year of construction: 2016, total width: 1,000 mm, total height: 1,200 mm, Control Cabinet/Electrical Control Cabinet/Conveyor Technology Manufacturer: RBS Förderanlagen GmbH Year of manufacture: 2016 Condition: used Model: Schaltschrank-Rittal Overall height: approx. 1200 mm Overall width: approx. 1000 mm Overall depth: approx. 300 mm Total height including feet: approx. 2000 mm The conveyor system was operational until disassembly. Thanks to the high-quality workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods! We are happy to provide you with an individual quotation or advise you on design or installation questions. Simply let us know your requirements and site conditions. Benefit from our many years of experience and our excellent network of specialists. We have already successfully realized projects for companies in various sectors such as logistics, pharmaceutical industry, skilled trades, and the electronics sector. Fgedpfsxw N S Ujx Aanji Together, we will find solutions to optimize your processes and material flows in a cost-effective and sustainable manner. We can also offer fully automatic sorting systems or additional components such as order picking racks or containers. Features: Condition: fully functional, with signs of use Ideal for fast material transport Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst)

Condition: used, Three-pump vacuum unit with control cabinet for food processing plants Fgodsz Nc Iqopfx Aanei This used unit consists of three Bora vacuum pumps, type SAP 450, mounted on a single shared frame. Each pump has a filter housing on top and all three are connected to a common manifold. The accompanying control cabinet holds three Omron Hitachi frequency inverters (JX series, 4 kW, 400 V). It also contains a Moeller controller with display and motor protection switches. Three rotary switches are fitted in the door. The frame stands on adjustable feet. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Vacuum unit with three pumps and control cabinet Pumps: 3 × Bora SAP 450, on a shared frame with common manifold Frequency inverters: 3 × Omron Hitachi JX, 4 kW, 400 V Controller: Moeller controller with display, motor protection switches Frame: On adjustable feet

Condition: good (used), Just Normlicht Proof Control Station Ideal as a control desk for a printing machine. 230V power supply Fgsdjz N Sifepfx Aanei 3 drawers + opening cabinet. Keyboard drawer. Electronic light control (luminous intensity).

Condition: used, Control cabinet - cooling device, control cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling device, control cabinet cooler Fgjdpfx Aaeq T T Nzonji -Manufacturer: Siemens, heat exchanger control cabinet cooling device from milling machine MAHO MH 800C -Type: 8ME 7874-DR -Voltage: 230V -Power consumption: 170W -Dimensions: 415/130/H725 mm -Weight: 14.2 kg

Condition: new, Automation cabinet, control system cabinet, switchgear cabinet, Siemens SPPA - T2000 Control system and cabinet design Siemens switchgear cabinet, SPPA - T2000 AS 620B R903, Siemens 8 MF cabinet SPPA FUM R standard cabinet 6DP2623-1GG10-0XX0-Z Switchgear cabinet, Siemens sppa-t2000 8 MF cabinet AS 620 B R903 6DP2623-1GG10-0XX0-Z B15+Y88 Y88=A5E03444617 B15: with cross-connection Component set for earthquake reinforcement, front and rear Double doors 2 x partition wall Transporting eyelets Cabinet indicator lamp Height × Width × Depth: 2200 × 900 × 400 mm Protection class IEC60529: IP20 Protected against solid foreign objects (diameter ≥ 12 mm), no protection against water Central unit module carrier: 1 x reduced AP FUM-B-BGT: 3 x EU 903 module carrier with 2 x Profibus connection, IM616 and control system monitoring with 1 x Fum210 Sys 36 fuse slots Color: RAL 7032 switchgear cabinet, Siemens Fgjdpfjtzbdkox Aansi Module designation Fum210/6DP1210-8BC Teleperm XP Binary module Profibus connection interface module IM616 6DP1616-8BA More items in other sizes - new and used - can be found in our shop! International shipping costs available upon request!

Condition: used, Second-hand control cabinet, a Weinig Univar 10, suitable as a source of spare parts or for building a new control cabinet. Fgodpfx Aajztvtwenji Contents include, amongst others: EMC PA10A513 Interbus Moeller PKZM Schaffner FN351-25-33 Lenze EVF8216-E Setzermann SS6E3/5 Siemens 3TD43 Individual parts available on request

Condition: used, Control cabinet with Keyence CV-5501P, CA-DC20E, CA-MP81, CA-D3R, CA-CN3, Rittal SK 3201.300, and Rexroth R911170402-102, as well as Murr Elektronik 54205. CV5501P, CADC20E, CAMP81, CAD3R, CACN3, SK3201.300, R911170402-102, control cabinet, distribution box, enclosure, distributor, cooler, cooling unit, imaging, camera, camera cable. All other installed components are included in the scope of delivery (see images). Overall dimensions (with Rittal cooler): Width: approx. 45 cm, Depth: approx. 23 cm, Height: approx. 45 cm. Overall dimensions (without Rittal cooler, only the cabinet itself): Width: approx. 30 cm, Depth: approx. 23 cm, Height: approx. 40 cm. Modules: Keyence CV-5501P digital image receiver, Keyence CA-DC20E expansion unit, Keyence CA-MP81 monitor screen, Keyence CA-D3R cable for LED lighting, Keyence CA-CN3 cable, camera cable, Rittal SK 3201.300 thermoelectric cooling unit (100 watts cooling capacity), Rexroth R911170402-102 Profibus module, Murr Elektronik 54205 module interface. Fjdpfxsk S Dazj Aansgi The monitor cover is slightly curved, but should be relatively easy to reattach (glue). More control cabinets – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Control cabinet, distribution cabinet, switch cabinet, baying cabinet, server cabinet, electrical cabinet -Manufacturer: Ecoair, control cabinet test field on mobile base -Type: 10 outlets -Switching capacity: Outputs 1-5 max. 11 kVA / Outputs 6-10 max. 7 kVA Fsdpfszrufvsx Aanogi -Features: see photos -Dimensions: 2075/1000/H2150 mm -Weight: 373 kg

Condition: used, Second-hand Weinig Unicontrol 6 control cabinet, suitable for use as a source of spare parts or for building a new control cabinet. Fedpfx Aeztvt Reanegi Contents include, amongst other things: Hilger & Kern brake unit Rathgeber ET 1000 transformer

Condition: used, Rittal control cabinet air conditioning unit TS 8806.500 Rittal standard control cabinet used air conditioning unit TS 8806.500 Lighting PS 4155100 220x80x60 cm (H x W x D) Powder-coated Rittal control cabinet air conditioning unit SK 3304500 EAN: 4028177251038 Fsdpfxoxl Td Rj Aanjgi control cabinet air conditioning unit You can find more control cabinets in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2000, Switch cabinet cooling unit, switch cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling unit, switch cabinet cooler -Manufacturer: Siemens, control cabinet cooling unit from CNC milling machine MAHO MH 800C -Type: K1000 -Voltage: 230V -Power consumption: 700 W -Dimensions: 155/1100/H455 mm Fgedpfxewcb Dpj Aanji -Weight: 48 kg

Condition: used, Second-hand control cabinet, a Weinig Unicontrol 10, suitable for use as a source of spare parts or for building a new control cabinet. Contents include, amongst other things: Siemens Simatic S5 Fgedpfxoztvt Ds Aanei Siemens EMG 45

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Cabinet Sub-distribution Panel Switch Cabinet Power Distributor Floor Distributor Dimensions: 200x85x22.5 cm incl. plinth Cabinet height without plinth: 190 cm + 10 cm plinth = total height Industrial quality, enclosure made of sheet steel, color 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distribution panels were in operation until recently and underwent annual inspection. Wiring diagram is included. 10 units available. Year of manufacture: 2003 For further data, please refer to the pictures. Very good condition – almost like new, see photos Collection by appointment only in 75053 Gondelsheim A forklift is available for loading Shipping by freight forwarder possible, please inquire with ZIP code Fgjdpfsynwx Sox Aanei

Condition: good (used), functionality: fully functional, Year of construction: 2020, CNC Plasma Cutting Machine PIERCE 02047 RUM 3000+ GP including accessories Workstation Specifications 1) CNC Cutting Machine RUM 3000+ GP Year of manufacture: 2020 Serial No.: 02047 Machine condition: Used, fully operational Working cutting width: 2,500 mm Cutting length: 12,000 mm Maximum cutting width: 2,550 mm Maximum cutting length: 12,050 mm Machine track length: 14 m (12 m + 2 m parking area) Position of PIERCE 19" control unit: Left side of the machine gantry Floating motorized oxy-fuel cutting head with EI and THC: 1 pc Floating motorized plasma cutting head with IHS and THC: 1 pc Material types: Mild steel / stainless steel Oxy-fuel technology – cutting gas: Propane Oxy-fuel torch type: HARRIS Position of utility supply lines along the longitudinal axis: Lower position Energy chain type: Energy chain with aluminum cover, width 200 mm Data transfer to control unit: USB port + Wi-Fi network (client) Automatic machine zero-position detection: Yes Laser Cross optical positioning system: Yes, 1 pc (mounted on the plasma head) Plasma technology – anti-collision system: Magnetic, 1 pc Machine operating ambient temperature: +10 °C to +40 °C Minimum ambient temperature must not fall below +5 °C 2) Plasma Unit Hypertherm HPR260XD with AGC (Automatic Gas Console) Fjdpfx As Ait U Roansgi Year of manufacture: 2013 Serial No.: 260XD-004852 3) Cutting Table TIGEMMA Medium Series Working table dimensions: 2.5 m × 12 m Overall internal table dimensions: 2.6 m × 12.3 m Table load capacity: 1,800 kg/m² Maximum cutting material thickness: up to 220 mm Table section control: Pneumatic (rail system)

Condition: excellent (used), Control cabinet, distribution cabinet, switch cabinet, baying cabinet, server cabinet, electrical cabinet -Control cabinet: Electrical cabinet, server cabinet, unused -Type: 1-winged -Door: lockable -Overall dimensions: WDH 800/850/2190 mm Fjdeygh E Hspfx Aanogi -Weight 211 kg