Used Cycle Control for sale (47,165)

Condition: excellent (used), Year of construction: 2005, Turning length 610 mm Turning Ø 360 mm Ø on bed 360 mm Ø on carriage 200 mm Distance between centres 610 mm X axis 180 mm Z axis 610 mm Spindle nose CM 6 Spindle bore 54 mm Number of turrets -1 Number of tools - 8 Turret VDI 20 Turning tool selection 16 x 16 mm Boring bar Ø 25 mm Speed 4200 rpm Hfjlhccqjvc E Rnjtei Spindle motor capacity 7.5 kw Dimensions: 1950 x 1320 x 1640 mm Weight 2100 kg

Condition: new, Year of construction: 2024, Functionality: fully functional, The conveyor belt of the company MASS is for sale, NDZ 2 with corrugated edge and takt control You can also have the conveyor belt without corrugated edge and takt control then the conveyor belt costs ONLY 2359€ NDZ 2 Feed: 600 mm Pitch: 1300 mm Discharge belt : 500 mm Hfolhcottmubecqtsi Mobile With corrugated edge With take control With hopper

Condition: ready for operation (used), Year of construction: 1995, Make: GILDEMEISTER Type of machine: NEF Plus 500 Hfjlhccstpn S Ioqtji Year of manufacture: 1995 Control system: Gründig Machine's weight: 2650 kg Speed range: 8 - 2800 1/ min Cutting diameter: 500 mm Turning length: 1000 mm Overall dimensions: 2500 x 1750 x 1850 mm Spindle opening: 70 mm

Condition: used, New 2007 Seimens Sinumerik control Swing over bed Ø460 mm Swing over cross slide Ø258 mm Swing in the gap Ø670 mm Turning Length 1500 mm Spindle bore 58 mm Hfjlhccswtpzqeqtei Spindle power 7.5 kW Spindle taper 4 Mt Speeds ranges 3000 Rpm Feed rate X-Axis 5000 mm/min. Feed rate Z-Axis 5000 mm/min.

Condition: good (used), Year of construction: 2006, Functionality: fully functional, Technical details turning diameter 570 mm turning length 1500 mm control Siemens SINUMERIK 810D weight of the machine ca. 5,2 t dimensions of the machine ca. 6648 x 2735 x 1973 mm Additional information Centre height 570 mm Centre height over flat track 280 mm Diameter over bed 570 mm Diameter over cross slide 365 mm x-axis 345mm x-axis feed max. 2500 mm/min z-axis feed max. 5000 mm/min x-axis rapid traverse max. 5000 mm/min z-axis rapid traverse max. 10000 mm/min x-axis feed force 7,100 N Hfelhccqowyvdrjtei z-axis feed force 12500 N Feed control 0% - 120% max. workpiece weight from front edge of clamping device 400 kg with tailstock 1000 kg with tailstock and 1 steady rest 1300 kg with tailstock and 2 steady rests 1600 kg Main spindle: Spindle / bore / spindle Ø in the front bearing DIN 52027 - A 8 / Ø62 / Ø100 Inner taper of the main spindle metric 70 Drive power 25 kW 60%; 20 kW 100% ED Torque max. 1800 Nm / 1400 Nm 2 gear stages Speed range 3-2500 rpm Speed range gear step 1: 3-500 rpm Speed range gear step 2: 15-2500 rpm Tool: SAUTER 8-station turret: Ø40 Turret no.: 0.5.480.516-089768 ComNo. 06.09216 Tool holders DIN 69880 / Ø50 Lathe tool - cross-section according to DIN 770 h x w 32 x 25 Tailstock: Quill diameter 100 mm Inner taper quill MK 5 Quill travel 190 mm Cooling: frequency controlled 1 bar/10 ltr - 4 bar/20 ltr; 2-stage programmable Dimensions: max. machine size (without chip conveyor) 4300 x 2131 x 1973 mm Space requirement (incl. chip conveyor) 6648 x 2735 x 1973 mm Accessories: 3-jaw chuck, diameter 250 mm chip conveyor, make KNOLL, built 2015 fixed steady rest moving steady rest various tool holders

Condition: used, Year of construction: 2009, Cycle-controlled lathe WEILER E 40 Year of manufacture: 2009 Spindle bore: 66 mm Centre distance: 1000 mm Swing diameter over bed: 435 mm Helhccqswyn Nyetefi Centre height: 210 mm Speed range: 1 – 3500 rpm stepless Accessories: 400 mm faceplate, Multifix toolholder with inserts

Condition: ready for operation (used), 1 used cycle lathe Manufacturer: DMT Kern Model: CD 650 x 1500 Year of manufacture: 2005 Technical specifications: Swing diameter over bed: 650 mm Swing diameter in gap: 680 mm Swing diameter over cross slide: 420 mm Turning length before chuck diameter: 1500 mm Longitudinal slide travel: 1550 mm Cross slide travel: 420 mm Max. workpiece weight (kg): Spindle head DIN 55026 size A8 with metric Spindle bore: 90 mm Spindle diameter in front bearing: 140 mm Quill travel: 200 mm Quill diameter: 100 mm Taper in tailstock quill: MK 5 Max. chuck diameter: 400 mm Maximum turning tool section: 25x25 mm Hfoljwzapzohccqtoi Feed force Z axis: 12,500 N Feed force X axis: 9,000 N Feed Z axis: mm/rev Feed X axis: mm/rev Rapid traverse Z axis: 7 m/min Rapid traverse X axis: 5 m/min

Condition: good (used), Year of construction: 1997, mas masturn 40 cnc teach-in heidenhain control 1997 max. turning diameter 400 mm Hfolhccqjwbputjtei max. turning diameter above bed 250 mm max. turning length 800 mm spindle 1 - 2400 rpm spindle bore 61 mm 11 kw incl. accessories and documentation machine is connected for inspection.

Condition: excellent (used), Year of construction: 1999, machine/vehicle number: P20268, turning length: 1,000 mm, turning diameter over bed slide: 210 mm, center height: 167 mm, swing diameter over bed slide: 330 mm, spindle speed (max.): 3,500 rpm, total length: 2,040 mm, total width: 1,200 mm, total height: 1,500 mm, overall weight: 1,500 kg, spindle diameter: 42 mm, controller manufacturer: FANUC, tailstock quill diameter: 42 mm, tailstock quill mount: MK 3, tailstock quill stroke: 110 mm, EQUIPMENT: - Tailstock Holhccowxnnaoqtjfi - Tool holder - Quick-change chuck - Various tool holders - Suitable workshop trolley - Machine accessories: various chucks, steadies, clamping jaws, collets NOTES: - The item must be collected definitively between September 16th and 19th on a specific date to be agreed upon

Condition: ready for operation (used), Year of construction: 2003, Weiler E50 x 1000 precision lathe (2003) Manufacturer: Weiler Type: E50 x 1000 Year of manufacture: 2003 Condition: good, used, under power Operating hours: 43.000h Technical data see pictures. Included in delivery: Hjlhccqowypg Hotjfi - Original documentation - Rota S Plus 250-62 - Bezel - Parat 4 compartment tool turret

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Weiler C30 lathe, year of manufacture 2005, software version C2, great condition, CE!!! Technical data: >> Machine no. 130 >> Center height: 165 mm >> Swing diameter over bed: 330 mm >> Swing diameter over face slide: 160 mm >> Center distance: 750 mm TURNING SPINDLE >> Spindle head: DIN 55027/DIN ISO 702-3 Gr. 5 >> Spindle bore: 42 mm >> Spindle diameter in front bearing: 70 mm MAIN DRIVE >> Drive power: 60%/100% ED 9/7 kW >> Speed range: 1 – 4,500 min-1 >> Number of speeds: infinitely variable FEED RANGE >> Number: infinitely variable >> Longitudinal: 0.001 – 10 mm/rev >> Face: 0.001 – 10 mm/rev >> Feed force longitudinal: 6,000 N >> Feed force face: 3,000 N >> Max. rapid traverse speed: longitudinal/face 6/3 m/min THREAD CUTTING RANGE >> Metric threads: 0.1 – 400 mm >> Inch threads: 56 – 1/4 threads/inch TAILSTOCK >> Quill diameter: 50 mm >> Quill stroke: 130 mm >> Inner taper DIN 228: MK 3 >> Coolant system >> Space requirement approx.: LxWxH 1.8 x 1.15 x 1.65 m >> Weight of the machine approx.: 1.3 t >> Connected load 10KW Accessories and equipment: >> 1 piece three-jaw chuck new 160mm with 2 sets of jaws Hfelhov Aaxysccqtsi >> Collet system collets E386 from 3 to 28mm 0.5 mm increasing >> Parat clamping system with 6 pieces steel holders >> Multifix clamping system with 1 piece steel holder >> Operating instructions, spare parts plans >> Machine feet >> Coolant system About the machine: Offered is a Weiler C30 lathe with software version C2, built in 2005, in very good condition Condition. The C30 CNC lathe from Weiler is a small servo-conventional precision lathe. High quality, powerful and energy efficient. The precision lathe for the highly productive area in production, toolmaking, research institutes, repairs, but also in training and further education. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: used, Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 020564, turning length: 2,980 mm, turning diameter: 660 mm, spindle bore: 105 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, total height: 2,000 mm, total length: 6,510 mm, total width: 2,370 mm, quill diameter: 100 mm, quill stroke: 200 mm, swing diameter over cross slide: 400 mm, turning diameter over bed slide: 433 mm, workpiece weight (max.): 2,000 kg, overall weight: 5,300 kg, We are offering our cycle lathe for sale here. This is a bad investment that we never put into operation. * CNC control Siemens 810 D * Automatic 8-position SAUTER turret, tool holder VDI 40 * 3-jaw power chuck, diameter 300 mm * Chip conveyor * 2 steadies Hjlhccqowycnqetjfi * Central lubrication * Mahle changeover filter system

Condition: used, Year of construction: 1999, turning diameter 150 mm turning length 500 mm control Hfslhsvm Dv Dsccqtji total power requirement 4 kW weight of the machine ca. 0,8 t dimensions of the machine ca. m

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition Holhccqeh Hvk Ajtefi

Condition: used, Year of construction: 2007, Functionality: fully functional, turning diameter over cross slide: 435 mm, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 640 mm, center width: 1,500 mm, turning diameter over bed slide: 640 mm, swing diameter over cross slide: 435 mm, quill stroke: 190 mm, quill diameter: 100 mm, quill travel distance: 190 mm, center height: 320 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, swing diameter over bed slide: 640 mm, spindle speed (min.): 3 rpm, spindle speed (max.): 2,500 rpm, feed length X-axis: 365 mm, feed length Z-axis: 1,500 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 10 m/min, bed width: 1,800 mm, workpiece weight (max.): 1,600 kg, type of input current: AC, travel distance cross slide: 365 mm, rotational speed (min.): 3 rpm, rotational speed (max.): 2,500 rpm, three-jaw chuck diameter: 315 mm, torque: 640 Nm, travel distance X-axis: 365 mm, travel distance Z-axis: 1,500 mm, workpiece weight between centers: 1,600 g, spindle diameter: 100 mm, workpiece diameter between centers: 640 mm, distance between centers: 1,500 mm, workpiece length between centers: 1,500 mm, chuck outer diameter: 315 mm, Equipment: rotational speed infinitely variable, Model: VDF Boehringer DUS 630 Helhcowywxdocqtefi Swing diameter over bed: 640 mm Swing diameter over cross slide: 435 mm Travel of cross slide / top slide: 365 mm / 145 mm Center height over flat bed: 320 mm Distance between centers: 1,500 mm Cross slide dimensions (W x L): 265 x 630 mm Top slide dimensions (W x L): 220 x 425 mm Turning tool section: 32 x 25 mm Spindle bore: 70 mm Front spindle diameter: 100 mm Max. torque (40% / 100% duty cycle): 1,600 / 640 Nm Speed range (overall): 3–2,500 rpm Gear stages: 2 Constant cutting speed: 1–9,999 m/min Feed range transverse/longitudinal: 0.01–50 mm/rev Max. feed rate transverse/longitudinal: 10 m/min Rapid traverse transverse/longitudinal: 5 m/min Feed force transverse/longitudinal: 12,500 N Metric thread pitches: 0.1–400 mm Quill diameter / stroke / taper: 100 mm / 190 mm / MT5 Faceplate: Ø 630 mm Setover tailstock center: Ø 150 mm Workpiece weight (max.): Between centers: 400 kg With tailstock & 2 steadies: 1,600 kg Display: 10.4" color LCD, showing (among others) spindle speed, feed rate, position, tool, load

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Weiler C30 x 750 precision lathe (2007) Manufacturer: Weiler Type: C30 x 750 Year of manufacture: 2007 Availability: several machines available Condition: very good, used, from training workshop, last maintenance 09/2024 Center width 750mm Circulation diameter over bed 330mm Rotation diameter facing slide 160mm Movement of facing slide 180mm Bed width 240mm Turning tool cross-section 20 x 20mm Spindle head according to DIN 55027 size 5 Spindle diameter in front bearing 70mm Spindle bore 40.5mm Inner taper of the main spindle 5mm Drive power 60 %/100 % ED 9/7KW Total speed range 1 - 4,500 rpm Feed force longitudinal 6,000N Planar feed force 3,000N Feed range 0.001 - 10 mm/rev Rapid traverse speed longitudinal/plane 6/3 m/min Metric threads 0.1 - 400mm Inch thread 56 - 1/4 G/inch Module thread 0.125 - 28mm DP thread 224 - 1 Dp Max. Threads 99 Quill diameter 50mm Quill stroke 130mm Inner taper of quill MK3 Length 1750mm Width 1350mm height 1670mm Holhcjwypgmscqtefi Weight 1300kg Scope of delivery Rota S Plus 200-52 jaw chuck Multifix Machine light Coolant system Machine feet Original documentation Weiler maintenance log 09/2024

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, Gildemeister NEF 320 K lathe cycle-controlled Siemens Sinumerik 810 DL control built in 2001, very good original condition Technical data: >> Built in 2001 >> Swing diameter over bed: 320 mm >> Swing diameter over slide: 150 mm >> Distance between centers: 750 mm >> Plane travel: 185 mm >> Feed X: 4 m/min >> Feed Y: 4 m/min >> X rapid traverse: 8 m/min >> Y rapid traverse: 10 m/min >> Spindle head DIN 55027 size 6 >> Spindle bore: 52 mm >> Drive power 100%: 7 kW >> Speed range: 14-3550 (2 levels) rpm >> Tailstock quill diameter: 70 mm >> Tailstock quill stroke: 120 mm >> Tailstock quill taper: ISO MK 5 >> Dimensions: 2600 X 1440 X 1440 mm >> Weight of the machine approx.: 2.0 t Accessories and equipment: >> 1 three-jaw chuck Röhm 200mm with 2 sets of jaws >> Mulifix size B with 4 steel holders >> Operating instructions, electrical plans >> Machine feet About the machine: Offered is a Gildemeister NEF 320 K lathe with automatic cycles, built in 2001, in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Gildemeister runs very quietly even at high speeds. This newer generation of lathes is very user-friendly and surfaces can be produced as if they were ground. The machine comes from a training workshop of a large company. Take the opportunity to inspect this machine on site under power and convince yourself of its condition. Hfjlhccqov Aix Astsi

Condition: excellent (used), Year of construction: 2001, turning diameter 330 mm turning length 750 mm control WEILER D 1 centre height 165 mm centre distance 750 mm swing diameter over face slide 160 mm spindle bore 42 mm spindle turning speed range 1 - 4500 U/min spindle head DIN 55027 Gr. 5 face slide travel 180 mm feeds X-axis mm/U feeds Z-axis mm/U rapid traverse X-axis 5 m/min rapid traverse Z-axis 10 m/min feed power X/Z axis 3000 / 6000 N tailstock taper MT 3 tailstock quill diameter 50 mm tailstock quill stroke 110 mm total power requirement 10 kW weight of the machine ca. 1,3 t dimensions of machine L x W x H 1,8 x 1,2 x 1,7 m Hjlhcjwi Ugqscqtofi Accessories: 3-jaw chuck SCHUNK 0 mmø, changing tool post, coolant

Condition: used, Year of construction: 1998, turning diameter 570 mm turning length 2000 mm control total power requirement 15 kW Hfelhsugawfoccqtji weight of the machine ca. 3,5 t dimensions of the machine ca. m

Condition: new, Z-MaT CNC/Cycle Lathe FTL660-2000mm Control: Siemens 828D Shop Turn, 15" Touch Flat bed with linear roller guideways and telescopic cover Hydraulic 3-jaw chuck 380 mm Ø Max. swing over bed: Ø700 mm Max. workpiece length: 1800 mm (with chuck) Max. turning diameter over cross slide: Ø480 mm Spindle Spindle bore: Ø120 mm Max. bar capacity: Ø110 mm Spindle nose: A2-11 Max. spindle speed: 1000 rpm Spindle power: 22/30 kW Helowwt Trehccqtefi Tooling 12-position servo turret Tailstock Hydraulic tailstock MK5 Quill stroke: 100 mm Tailstock travel: 1850 mm (manual) Axes X-axis travel: 370 mm Z-axis travel: 2000 mm X/Z-axis rapid traverse: 15/15 m/min Bed type/guides: box bed/linear roller guides Bed width: 600 mm Accessories: Manual steady rest 110–260 Overall dimensions (L×W×H): 4.5 x 1.96 x 2.1 m Weight (approx.): 6.4 t The machine will be displayed at EMO, Hall 12/D10, and will be available immediately afterwards. Further sizes of this series can be found in the PDF.

Year of construction: 2001, Condition: used, turning diameter 420 mm Hfolhccqjh N D Unotsi turning length 1200 mm control Fanuc bore diameter 60 mm

Condition: good (used), Year of construction: 1995, Circulation/rotation Ø over bed 650 mm Circulation/rotation Ø over in the recess 680 mm Rotation/rotation Ø via cross slide 420 mm Turning length before chuck diameter 200 / 1500 / 2000 / 3000 mm longitudinal slide -travel 1050 / 1550 / 2050 / 3050 mm face slide travel 420 mm max. workpiece weight kg spindle head DIN 55026 Gr. A8 mit metr spindle bore 90 mm spindle diameter in front bearing 140 mm quill stroke 200 mm diameter of quill 100 mm taper in tailstock-quill MK 5 max. chucking diameter 400 mm Hfolhccqewhf Ebjtei Largest turning tool cross-section 25x25 mm Feed force Z-axis 12500 N Feed force X-axis 9000 N Feed rate Z-axis mm/U Feed rate X-axis - mm/U rapid traverse Z-axis 7 m/min rapid traverse X-axis 5 m/min This machine is used for the production of individual parts and small batches from simple to the most complex contours. It is characterised by: --> Ease of operation Precision Working range

Condition: not inspected (used), Functionality: unexamined, turning length: 1,000 mm, turning diameter: 500 mm, turning diameter over bed slide: 300 mm, ❗►CNC Cycle Lathe XYZ PROTURN 1745◄❗ ● Condition: Not tested ● Year of manufacture: Likely 1996 ● Machine number: Likely 28749 ● Delivery terms: Free loaded on truck ● Location: Hesse ● Availability: Planned for September 2025 – possibly earlier for an additional charge ● Payment terms: Advance payment – by bank transfer ● Internal ref.: HILP140 ● Can be inspected under power: YES ⚙️Technical Data Holhcowvatvocqtefi ☑️Control: PROTOTRAK LX2 ☑️Distance between centers: 1000 mm ☑️Center height over bed: 250 mm ☑️Swing over bed: 500 mm ☑️Center height over cross slide: 150 mm ☑️Swing over cross slide: 300 mm ☑️Spindle bore: approx. 50 mm ☑️Spindle speed: 0 – 2300 rpm ☑️Machine equipped with tailstock, Multifix tool holder, 3-jaw chuck (180 mm) Scope of delivery ✔ Available documentation ✔ Various jaws Dimensions & weights ● Installation size L x W x H approx.: 2700 x 1500 x 1800 mm ● Weight approx.: 3000 kg ℹ️If you have questions or wish to arrange an inspection, feel free to contact us. ⚠️Additional notes: ►Transport to destination can be offered upon request ►Offer price is net plus VAT ►The item is sold excluding any warranty ►Technical data without guarantee ►Subject to prior sale ❗Sale exclusively to businesses❗

Condition: as good as new (ex-display), Year of construction: 2025, Functionality: fully functional, turning diameter over cross slide: 370 mm, spindle bore: 140 mm, center width: 2,000 mm, turning diameter over bed slide: 630 mm, quill stroke: 200 mm, quill diameter: 100 mm, center height: 315 mm, rapid traverse X-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, spindle speed (min.): 2 rpm, spindle speed (max.): 2,500 rpm, bed width: 433 mm, total length: 4,200 mm, total width: 2,500 mm, total height: 2,170 mm, overall weight: 2,500 kg, travel distance X-axis: 390 mm, controller manufacturer: Siemens, controller model: 840D sl + ShopTurn mit „manual machine“, Equipment: rotational speed infinitely variable, Swing over bed: 630 mm Center distance: 2000 mm Maximum speed range: 2500 rpm Spindle power (100% duty cycle): 20 kW (AC drive) Spindle mount: Camlock D11 Spindle bore: 140 mm Included equipment includes: - Multifix C - Movable control panel along the entire length - Extendable chip tray - Siemens AC servo motors - Siemens power supply and amplifier modules - Automatic (or via M function) gear change (2 speeds) - Machining area covered by two sliding doors - Operating mode 1 and operating mode 2 (setup mode at 5 rpm) - Siemens 840D sl ShopTurn control system with "manual machine" - 15-inch touchscreen in 16:9 format - For manual machines, the Cycles can be processed without creating a program header - Siemens control option: residual material detection - Absolute encoder (i.e., no reference point travel required) - USB interface on the control panel - Manual tailstock with drag device and 100 mm spindle diameter - Automatic central lubrication Hfjlhjwgbtreccqtei - Coolant system

Condition: used, Year of construction: 1996, turning diameter 400 mm turning length 915 mm Holhccqet Hw Szotefi control NUM Type 1062 T total power requirement 12,5 kW weight of the machine ca. 5500 kg dimensions of the machine ca. m